[v3,3/4] Documentation: iio: ad4000: Add IIO Device characteristics section

Commit Message

Marcelo Schmitt March 26, 2025, 1:25 p.m. UTC

Complement ad4000 IIO driver documentation with considerations about
``_scale_available`` attribute and table of typical channel attributes.

Signed-off-by: Marcelo Schmitt <[e-mail]>
---
 Documentation/iio/ad4000.rst | 47 ++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

Comments

David Lechner March 27, 2025, 4:14 p.m. UTC | #1

On 3/26/25 8:25 AM, Marcelo Schmitt wrote:
> Complement ad4000 IIO driver documentation with considerations about
> ``_scale_available`` attribute and table of typical channel attributes.
> 
> Signed-off-by: Marcelo Schmitt <[e-mail]>
> ---


Reviewed-by: David Lechner <[e-mail]>

Patch

diff --git a/Documentation/iio/ad4000.rst b/Documentation/iio/ad4000.rst
index 5578a9cfd9d5..468d30dc9214 100644
--- a/Documentation/iio/ad4000.rst
+++ b/Documentation/iio/ad4000.rst
@@ -144,3 +144,50 @@  Set ``adi,sdi-pin`` to ``"cs"`` to select this mode.
                     ^                    |             |
                     +--------------------| SCLK        |
                                          +-------------+
+
+IIO Device characteristics
+==========================
+
+The AD4000 series driver supports differential and pseudo-differential ADCs.
+
+The span compression feature available in AD4000 series devices can be
+enabled/disabled by changing the ``_scale_available`` attribute of the voltage
+channel. Note that span compression configuration requires writing to AD4000
+configuration register, which is only possible when the ADC is wired in 3-wire
+turbo mode, and the SPI controller is ``SPI_MOSI_IDLE_HIGH`` capable. If those
+conditions are not met, no ``_scale_available`` attribute is provided.
+
+Besides that, differential and pseudo-differential voltage channels present
+slightly different sysfs interfaces.
+
+Pseudo-differential ADCs
+------------------------
+
+Typical voltage channel attributes of a pseudo-differential AD4000 series device:
+
++-------------------------------------------+------------------------------------------+
+| Voltage Channel Attributes                | Description                              |
++===========================================+==========================================+
+| ``in_voltage0_raw``                       | Raw ADC output code.                     |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0_offset``                    | Offset to convert raw value to mV.       |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0_scale``                     | Scale factor to convert raw value to mV. |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0_scale_available``           | Toggles input span compression           |
++-------------------------------------------+------------------------------------------+
+
+Differential ADCs
+-----------------
+
+Typical voltage channel attributes of a differential AD4000 series device:
+
++-------------------------------------------+------------------------------------------+
+| Voltage Channel Attributes                | Description                              |
++===========================================+==========================================+
+| ``in_voltage0-voltage1_raw``              | Raw ADC output code.                     |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0-voltage1_scale``            | Scale factor to convert raw value to mV. |
++-------------------------------------------+------------------------------------------+
+| ``in_voltage0-voltage1_scale_available``  | Toggles input span compression           |
++-------------------------------------------+------------------------------------------+