[RESEND,v3,17/17] iio: adc: ad7768-1: add low pass -3dB cutoff attribute

Commit Message

Jonathan Santos Feb. 12, 2025, 6:19 p.m. UTC

Ad7768-1 has a different -3db frequency multiplier depending on
the filter type configured. The cutoff frequency also varies according
to the current ODR.

Add a readonly low pass -3dB frequency cutoff attribute to clarify to
the user which bandwidth is being allowed depending on the filter
configurations.

Signed-off-by: Jonathan Santos <[e-mail]>
---
v3 Changes:
* None

v2 Changes:
* New patch in v2.

OBS: should i drop this?
---
 drivers/iio/adc/ad7768-1.c | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

Comments

Jonathan Cameron Feb. 16, 2025, 4:33 p.m. UTC | #1

On Wed, 12 Feb 2025 15:19:10 -0300
Jonathan Santos <[e-mail]> wrote:

> Ad7768-1 has a different -3db frequency multiplier depending on
> the filter type configured. The cutoff frequency also varies according
> to the current ODR.
> 
> Add a readonly low pass -3dB frequency cutoff attribute to clarify to
> the user which bandwidth is being allowed depending on the filter
> configurations.
> 
> Signed-off-by: Jonathan Santos <[e-mail]>
> ---
> v3 Changes:
> * None
> 
> v2 Changes:
> * New patch in v2.
> 
> OBS: should i drop this?
I think keep it as potentially useful and is compliant with the ABI
even if a little unusual.

Jonathan

Patch

diff --git a/drivers/iio/adc/ad7768-1.c b/drivers/iio/adc/ad7768-1.c
index 18f1ea0bf66d..2bf133da18c6 100644
--- a/drivers/iio/adc/ad7768-1.c
+++ b/drivers/iio/adc/ad7768-1.c
@@ -150,6 +150,17 @@  enum ad7768_scan_type {
 	AD7768_SCAN_TYPE_HIGH_SPEED,
 };
 
+/*
+ * -3dB cutoff frequency multipliers (relative to ODR) for
+ * each filter type. Values are multiplied by 1000.
+ */
+static const int ad7768_filter_3db_odr_multiplier[] = {
+	[AD7768_FILTER_SINC5] = 204,
+	[AD7768_FILTER_SINC3] = 261,
+	[AD7768_FILTER_SINC3_REJ60] = 261,
+	[AD7768_FILTER_WIDEBAND] = 433,
+};
+
 static const int ad7768_mclk_div_rates[4] = {
 	16, 8, 4, 2,
 };
@@ -229,7 +240,8 @@  static const struct iio_chan_spec ad7768_channels[] = {
 		.type = IIO_VOLTAGE,
 		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
 		.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) |
-					    BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
+					    BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) |
+					    BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY),
 		.info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO),
 		.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),
 		.info_mask_shared_by_all_available = BIT(IIO_CHAN_INFO_SAMP_FREQ),
@@ -746,7 +758,7 @@  static int ad7768_read_raw(struct iio_dev *indio_dev,
 {
 	struct ad7768_state *st = iio_priv(indio_dev);
 	const struct iio_scan_type *scan_type;
-	int scale_uv, ret;
+	int scale_uv, ret, temp;
 
 	scan_type = iio_get_current_scan_type(indio_dev, chan);
 	if (IS_ERR(scan_type))
@@ -786,6 +798,12 @@  static int ad7768_read_raw(struct iio_dev *indio_dev,
 	case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
 		*val = st->oversampling_ratio;
 
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+		temp = st->samp_freq * ad7768_filter_3db_odr_multiplier[st->filter_type];
+		*val = DIV_ROUND_CLOSEST(temp, 1000);
+
 		return IIO_VAL_INT;
 	}