| Message ID | 5e6e4e78.1c69fb81.511f5.83ac@mx.google.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | [v6] iio: adc: max1363: replace uses of mlock | expand |
Pl. ignore this patch, it contains incorrect logic. Thanks, Rohit On Sun, Mar 15, 2020 at 09:19:08PM +0530, Rohit Sarkar wrote: > Replace usage indio_dev's mlock with either local lock or > iio_device_claim_direct_mode. > > Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com> > --- > Changelog v5 -> v6 > * Minor failure handling fixes > > Changelog v4 -> v5 > * Use local lock too at places where driver state needs to be protected. > > Changelog v3 -> v4 > * Fix indentation > > Changelog v2 -> v3 > * use iio_device_claim_direct when switching modes > * replace mlock usage in max1363_write_event_config > > Changelog v1 -> v2 > * Fix indentation > > drivers/iio/adc/max1363.c | 31 ++++++++++++++++++++++--------- > 1 file changed, 22 insertions(+), 9 deletions(-) > > diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c > index 5c2cc61b666e..647c99ae9fbe 100644 > --- a/drivers/iio/adc/max1363.c > +++ b/drivers/iio/adc/max1363.c > @@ -150,6 +150,7 @@ struct max1363_chip_info { > * @current_mode: the scan mode of this chip > * @requestedmask: a valid requested set of channels > * @reg: supply regulator > + * @lock lock to ensure state is consistent > * @monitor_on: whether monitor mode is enabled > * @monitor_speed: parameter corresponding to device monitor speed setting > * @mask_high: bitmask for enabled high thresholds > @@ -169,6 +170,7 @@ struct max1363_state { > const struct max1363_mode *current_mode; > u32 requestedmask; > struct regulator *reg; > + struct mutex lock; > > /* Using monitor modes and buffer at the same time is > currently not supported */ > @@ -364,7 +366,11 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, > struct max1363_state *st = iio_priv(indio_dev); > struct i2c_client *client = st->client; > > - mutex_lock(&indio_dev->mlock); > + ret = iio_device_claim_direct_mode(indio_dev); > + mutex_lock(&st->lock); > + > + if (ret < 0) > + goto error_ret; > /* > * If monitor mode is enabled, the method for reading a single > * channel will have to be rather different and has not yet > @@ -372,7 +378,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, > * > * Also, cannot read directly if buffered capture enabled. > */ > - if (st->monitor_on || iio_buffer_enabled(indio_dev)) { > + if (st->monitor_on) { > ret = -EBUSY; > goto error_ret; > } > @@ -404,8 +410,9 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, > data = rxbuf[0]; > } > *val = data; > + > error_ret: > - mutex_unlock(&indio_dev->mlock); > + mutex_unlock(&st->lock); > return ret; > > } > @@ -705,9 +712,9 @@ static ssize_t max1363_monitor_store_freq(struct device *dev, > if (!found) > return -EINVAL; > > - mutex_lock(&indio_dev->mlock); > + mutex_lock(&st->lock); > st->monitor_speed = i; > - mutex_unlock(&indio_dev->mlock); > + mutex_unlock(&st->lock); > > return 0; > } > @@ -810,12 +817,12 @@ static int max1363_read_event_config(struct iio_dev *indio_dev, > int val; > int number = chan->channel; > > - mutex_lock(&indio_dev->mlock); > + mutex_lock(&st->lock); > if (dir == IIO_EV_DIR_FALLING) > val = (1 << number) & st->mask_low; > else > val = (1 << number) & st->mask_high; > - mutex_unlock(&indio_dev->mlock); > + mutex_unlock(&st->lock); > > return val; > } > @@ -962,7 +969,12 @@ static int max1363_write_event_config(struct iio_dev *indio_dev, > u16 unifiedmask; > int number = chan->channel; > > - mutex_lock(&indio_dev->mlock); > + ret = iio_device_claim_direct_mode(indio_dev); > + mutex_lock(&st->lock); > + > + if (ret < 0) > + goto error_ret; > + > unifiedmask = st->mask_low | st->mask_high; > if (dir == IIO_EV_DIR_FALLING) { > > @@ -989,7 +1001,7 @@ static int max1363_write_event_config(struct iio_dev *indio_dev, > > max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low)); > error_ret: > - mutex_unlock(&indio_dev->mlock); > + mutex_unlock(&st->lock); > > return ret; > } > @@ -1587,6 +1599,7 @@ static int max1363_probe(struct i2c_client *client, > > st = iio_priv(indio_dev); > > + mutex_init(&st->lock); > st->reg = devm_regulator_get(&client->dev, "vcc"); > if (IS_ERR(st->reg)) { > ret = PTR_ERR(st->reg); > -- > 2.23.0.385.gbc12974a89 >
diff --git a/drivers/iio/adc/max1363.c b/drivers/iio/adc/max1363.c index 5c2cc61b666e..647c99ae9fbe 100644 --- a/drivers/iio/adc/max1363.c +++ b/drivers/iio/adc/max1363.c @@ -150,6 +150,7 @@ struct max1363_chip_info { * @current_mode: the scan mode of this chip * @requestedmask: a valid requested set of channels * @reg: supply regulator + * @lock lock to ensure state is consistent * @monitor_on: whether monitor mode is enabled * @monitor_speed: parameter corresponding to device monitor speed setting * @mask_high: bitmask for enabled high thresholds @@ -169,6 +170,7 @@ struct max1363_state { const struct max1363_mode *current_mode; u32 requestedmask; struct regulator *reg; + struct mutex lock; /* Using monitor modes and buffer at the same time is currently not supported */ @@ -364,7 +366,11 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, struct max1363_state *st = iio_priv(indio_dev); struct i2c_client *client = st->client; - mutex_lock(&indio_dev->mlock); + ret = iio_device_claim_direct_mode(indio_dev); + mutex_lock(&st->lock); + + if (ret < 0) + goto error_ret; /* * If monitor mode is enabled, the method for reading a single * channel will have to be rather different and has not yet @@ -372,7 +378,7 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, * * Also, cannot read directly if buffered capture enabled. */ - if (st->monitor_on || iio_buffer_enabled(indio_dev)) { + if (st->monitor_on) { ret = -EBUSY; goto error_ret; } @@ -404,8 +410,9 @@ static int max1363_read_single_chan(struct iio_dev *indio_dev, data = rxbuf[0]; } *val = data; + error_ret: - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&st->lock); return ret; } @@ -705,9 +712,9 @@ static ssize_t max1363_monitor_store_freq(struct device *dev, if (!found) return -EINVAL; - mutex_lock(&indio_dev->mlock); + mutex_lock(&st->lock); st->monitor_speed = i; - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&st->lock); return 0; } @@ -810,12 +817,12 @@ static int max1363_read_event_config(struct iio_dev *indio_dev, int val; int number = chan->channel; - mutex_lock(&indio_dev->mlock); + mutex_lock(&st->lock); if (dir == IIO_EV_DIR_FALLING) val = (1 << number) & st->mask_low; else val = (1 << number) & st->mask_high; - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&st->lock); return val; } @@ -962,7 +969,12 @@ static int max1363_write_event_config(struct iio_dev *indio_dev, u16 unifiedmask; int number = chan->channel; - mutex_lock(&indio_dev->mlock); + ret = iio_device_claim_direct_mode(indio_dev); + mutex_lock(&st->lock); + + if (ret < 0) + goto error_ret; + unifiedmask = st->mask_low | st->mask_high; if (dir == IIO_EV_DIR_FALLING) { @@ -989,7 +1001,7 @@ static int max1363_write_event_config(struct iio_dev *indio_dev, max1363_monitor_mode_update(st, !!(st->mask_high | st->mask_low)); error_ret: - mutex_unlock(&indio_dev->mlock); + mutex_unlock(&st->lock); return ret; } @@ -1587,6 +1599,7 @@ static int max1363_probe(struct i2c_client *client, st = iio_priv(indio_dev); + mutex_init(&st->lock); st->reg = devm_regulator_get(&client->dev, "vcc"); if (IS_ERR(st->reg)) { ret = PTR_ERR(st->reg);
Replace usage indio_dev's mlock with either local lock or iio_device_claim_direct_mode. Signed-off-by: Rohit Sarkar <rohitsarkar5398@gmail.com> --- Changelog v5 -> v6 * Minor failure handling fixes Changelog v4 -> v5 * Use local lock too at places where driver state needs to be protected. Changelog v3 -> v4 * Fix indentation Changelog v2 -> v3 * use iio_device_claim_direct when switching modes * replace mlock usage in max1363_write_event_config Changelog v1 -> v2 * Fix indentation drivers/iio/adc/max1363.c | 31 ++++++++++++++++++++++--------- 1 file changed, 22 insertions(+), 9 deletions(-)