| Message ID | 7919793f7f63224d5ce413c66d648029683c17ac.1663025017.git.ang.iglesiasg@gmail.com (mailing list archive) |
|---|---|
| State | Accepted |
| Headers | show |
| Series | Add support for pressure sensor Bosch BMP380 | expand |
On Tue, 13 Sep 2022 01:48:21 +0200 Angel Iglesias <ang.iglesiasg@gmail.com> wrote: > Adds DMA-safe buffers to driver data struct to store raw data from sensors > > The multiple buffers used thorough the driver share the same memory > allocated as part of the device data instance. The union containing > the buffers is aligned to allow safe usage with DMA operations, such > as regmap bulk read calls. > > Updated measurement and calibration reading functions to use the safe > DMA buffers. > > Suggested-by: Jonathan Cameron <jic23@kernel.org> > Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> Applied > --- > drivers/iio/pressure/bmp280-core.c | 131 ++++++++++++++++------------- > drivers/iio/pressure/bmp280.h | 4 +- > 2 files changed, 76 insertions(+), 59 deletions(-) > > diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c > index 203623d32032..b6a16a580962 100644 > --- a/drivers/iio/pressure/bmp280-core.c > +++ b/drivers/iio/pressure/bmp280-core.c > @@ -32,6 +32,8 @@ > #include <linux/pm_runtime.h> > #include <linux/random.h> > > +#include <asm/unaligned.h> > + > #include "bmp280.h" > > /* > @@ -106,6 +108,21 @@ struct bmp280_data { > * calculation. > */ > s32 t_fine; > + > + /* > + * DMA (thus cache coherency maintenance) may require the > + * transfer buffers to live in their own cache lines. > + */ > + union { > + /* Sensor data buffer */ > + u8 buf[3]; > + /* Calibration data buffers */ > + __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; > + __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; > + /* Miscellaneous, endianess-aware data buffers */ > + __le16 le16; > + __be16 be16; > + } __aligned(IIO_DMA_MINALIGN); > }; > > struct bmp280_chip_info { > @@ -160,13 +177,12 @@ static const struct iio_chan_spec bmp280_channels[] = { > static int bmp280_read_calib(struct bmp280_data *data) > { > struct bmp280_calib *calib = &data->calib.bmp280; > - __le16 c_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; > int ret; > > > /* Read temperature and pressure calibration values. */ > ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START, > - c_buf, sizeof(c_buf)); > + data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf)); > if (ret < 0) { > dev_err(data->dev, > "failed to read temperature and pressure calibration parameters\n"); > @@ -174,23 +190,23 @@ static int bmp280_read_calib(struct bmp280_data *data) > } > > /* Toss the temperature and pressure calibration data into the entropy pool */ > - add_device_randomness(c_buf, sizeof(c_buf)); > + add_device_randomness(data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf)); > > /* Parse temperature calibration values. */ > - calib->T1 = le16_to_cpu(c_buf[T1]); > - calib->T2 = le16_to_cpu(c_buf[T2]); > - calib->T3 = le16_to_cpu(c_buf[T3]); > + calib->T1 = le16_to_cpu(data->bmp280_cal_buf[T1]); > + calib->T2 = le16_to_cpu(data->bmp280_cal_buf[T2]); > + calib->T3 = le16_to_cpu(data->bmp280_cal_buf[T3]); > > /* Parse pressure calibration values. */ > - calib->P1 = le16_to_cpu(c_buf[P1]); > - calib->P2 = le16_to_cpu(c_buf[P2]); > - calib->P3 = le16_to_cpu(c_buf[P3]); > - calib->P4 = le16_to_cpu(c_buf[P4]); > - calib->P5 = le16_to_cpu(c_buf[P5]); > - calib->P6 = le16_to_cpu(c_buf[P6]); > - calib->P7 = le16_to_cpu(c_buf[P7]); > - calib->P8 = le16_to_cpu(c_buf[P8]); > - calib->P9 = le16_to_cpu(c_buf[P9]); > + calib->P1 = le16_to_cpu(data->bmp280_cal_buf[P1]); > + calib->P2 = le16_to_cpu(data->bmp280_cal_buf[P2]); > + calib->P3 = le16_to_cpu(data->bmp280_cal_buf[P3]); > + calib->P4 = le16_to_cpu(data->bmp280_cal_buf[P4]); > + calib->P5 = le16_to_cpu(data->bmp280_cal_buf[P5]); > + calib->P6 = le16_to_cpu(data->bmp280_cal_buf[P6]); > + calib->P7 = le16_to_cpu(data->bmp280_cal_buf[P7]); > + calib->P8 = le16_to_cpu(data->bmp280_cal_buf[P8]); > + calib->P9 = le16_to_cpu(data->bmp280_cal_buf[P9]); > > return 0; > } > @@ -200,8 +216,6 @@ static int bme280_read_calib(struct bmp280_data *data) > struct bmp280_calib *calib = &data->calib.bmp280; > struct device *dev = data->dev; > unsigned int tmp; > - __le16 l16; > - __be16 b16; > int ret; > > /* Load shared calibration params with bmp280 first */ > @@ -226,12 +240,13 @@ static int bme280_read_calib(struct bmp280_data *data) > } > calib->H1 = tmp; > > - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, &l16, 2); > + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, > + &data->le16, sizeof(data->le16)); > if (ret < 0) { > dev_err(dev, "failed to read H2 comp value\n"); > return ret; > } > - calib->H2 = sign_extend32(le16_to_cpu(l16), 15); > + calib->H2 = sign_extend32(le16_to_cpu(data->le16), 15); > > ret = regmap_read(data->regmap, BMP280_REG_COMP_H3, &tmp); > if (ret < 0) { > @@ -240,20 +255,22 @@ static int bme280_read_calib(struct bmp280_data *data) > } > calib->H3 = tmp; > > - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, &b16, 2); > + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, > + &data->be16, sizeof(data->be16)); > if (ret < 0) { > dev_err(dev, "failed to read H4 comp value\n"); > return ret; > } > - calib->H4 = sign_extend32(((be16_to_cpu(b16) >> 4) & 0xff0) | > - (be16_to_cpu(b16) & 0xf), 11); > + calib->H4 = sign_extend32(((be16_to_cpu(data->be16) >> 4) & 0xff0) | > + (be16_to_cpu(data->be16) & 0xf), 11); > > - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, &l16, 2); > + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, > + &data->le16, sizeof(data->le16)); > if (ret < 0) { > dev_err(dev, "failed to read H5 comp value\n"); > return ret; > } > - calib->H5 = sign_extend32(FIELD_GET(BMP280_COMP_H5_MASK, le16_to_cpu(l16)), 11); > + calib->H5 = sign_extend32(FIELD_GET(BMP280_COMP_H5_MASK, le16_to_cpu(data->le16)), 11); > > ret = regmap_read(data->regmap, BMP280_REG_COMP_H6, &tmp); > if (ret < 0) { > @@ -348,16 +365,16 @@ static int bmp280_read_temp(struct bmp280_data *data, > int *val) > { > s32 adc_temp, comp_temp; > - __be32 tmp = 0; > int ret; > > - ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, &tmp, 3); > + ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, > + data->buf, sizeof(data->buf)); > if (ret < 0) { > dev_err(data->dev, "failed to read temperature\n"); > return ret; > } > > - adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, be32_to_cpu(tmp)); > + adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf)); > if (adc_temp == BMP280_TEMP_SKIPPED) { > /* reading was skipped */ > dev_err(data->dev, "reading temperature skipped\n"); > @@ -381,7 +398,6 @@ static int bmp280_read_press(struct bmp280_data *data, > int *val, int *val2) > { > u32 comp_press; > - __be32 tmp = 0; > s32 adc_press; > int ret; > > @@ -390,13 +406,14 @@ static int bmp280_read_press(struct bmp280_data *data, > if (ret < 0) > return ret; > > - ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, &tmp, 3); > + ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, > + data->buf, sizeof(data->buf)); > if (ret < 0) { > dev_err(data->dev, "failed to read pressure\n"); > return ret; > } > > - adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, be32_to_cpu(tmp)); > + adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf)); > if (adc_press == BMP280_PRESS_SKIPPED) { > /* reading was skipped */ > dev_err(data->dev, "reading pressure skipped\n"); > @@ -414,7 +431,6 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) > { > u32 comp_humidity; > s32 adc_humidity; > - __be16 tmp; > int ret; > > /* Read and compensate temperature so we get a reading of t_fine. */ > @@ -422,13 +438,14 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) > if (ret < 0) > return ret; > > - ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, &tmp, 2); > + ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, > + &data->be16, sizeof(data->be16)); > if (ret < 0) { > dev_err(data->dev, "failed to read humidity\n"); > return ret; > } > > - adc_humidity = be16_to_cpu(tmp); > + adc_humidity = be16_to_cpu(data->be16); > if (adc_humidity == BMP280_HUMIDITY_SKIPPED) { > /* reading was skipped */ > dev_err(data->dev, "reading humidity skipped\n"); > @@ -769,7 +786,6 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) > > static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) > { > - __be16 tmp; > int ret; > > ret = bmp180_measure(data, > @@ -778,11 +794,12 @@ static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) > if (ret) > return ret; > > - ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 2); > + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, > + &data->be16, sizeof(data->be16)); > if (ret) > return ret; > > - *val = be16_to_cpu(tmp); > + *val = be16_to_cpu(data->be16); > > return 0; > } > @@ -790,36 +807,36 @@ static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) > static int bmp180_read_calib(struct bmp280_data *data) > { > struct bmp180_calib *calib = &data->calib.bmp180; > - __be16 buf[BMP180_REG_CALIB_COUNT / 2]; > int ret; > int i; > > - ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf, > - sizeof(buf)); > + ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, > + data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf)); > > if (ret < 0) > return ret; > > /* None of the words has the value 0 or 0xFFFF */ > - for (i = 0; i < ARRAY_SIZE(buf); i++) { > - if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff)) > + for (i = 0; i < ARRAY_SIZE(data->bmp180_cal_buf); i++) { > + if (data->bmp180_cal_buf[i] == cpu_to_be16(0) || > + data->bmp180_cal_buf[i] == cpu_to_be16(0xffff)) > return -EIO; > } > > /* Toss the calibration data into the entropy pool */ > - add_device_randomness(buf, sizeof(buf)); > - > - calib->AC1 = be16_to_cpu(buf[AC1]); > - calib->AC2 = be16_to_cpu(buf[AC2]); > - calib->AC3 = be16_to_cpu(buf[AC3]); > - calib->AC4 = be16_to_cpu(buf[AC4]); > - calib->AC5 = be16_to_cpu(buf[AC5]); > - calib->AC6 = be16_to_cpu(buf[AC6]); > - calib->B1 = be16_to_cpu(buf[B1]); > - calib->B2 = be16_to_cpu(buf[B2]); > - calib->MB = be16_to_cpu(buf[MB]); > - calib->MC = be16_to_cpu(buf[MC]); > - calib->MD = be16_to_cpu(buf[MD]); > + add_device_randomness(data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf)); > + > + calib->AC1 = be16_to_cpu(data->bmp180_cal_buf[AC1]); > + calib->AC2 = be16_to_cpu(data->bmp180_cal_buf[AC2]); > + calib->AC3 = be16_to_cpu(data->bmp180_cal_buf[AC3]); > + calib->AC4 = be16_to_cpu(data->bmp180_cal_buf[AC4]); > + calib->AC5 = be16_to_cpu(data->bmp180_cal_buf[AC5]); > + calib->AC6 = be16_to_cpu(data->bmp180_cal_buf[AC6]); > + calib->B1 = be16_to_cpu(data->bmp180_cal_buf[B1]); > + calib->B2 = be16_to_cpu(data->bmp180_cal_buf[B2]); > + calib->MB = be16_to_cpu(data->bmp180_cal_buf[MB]); > + calib->MC = be16_to_cpu(data->bmp180_cal_buf[MC]); > + calib->MD = be16_to_cpu(data->bmp180_cal_buf[MD]); > > return 0; > } > @@ -868,7 +885,6 @@ static int bmp180_read_temp(struct bmp280_data *data, int *val) > static int bmp180_read_adc_press(struct bmp280_data *data, int *val) > { > u8 oss = data->oversampling_press; > - __be32 tmp = 0; > int ret; > > ret = bmp180_measure(data, > @@ -878,11 +894,12 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val) > if (ret) > return ret; > > - ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 3); > + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, > + data->buf, sizeof(data->buf)); > if (ret) > return ret; > > - *val = (be32_to_cpu(tmp) >> 8) >> (8 - oss); > + *val = get_unaligned_be24(data->buf) >> (8 - oss); > > return 0; > } > diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h > index 03a539223417..c9214a7e5cc6 100644 > --- a/drivers/iio/pressure/bmp280.h > +++ b/drivers/iio/pressure/bmp280.h > @@ -13,8 +13,8 @@ > #define BMP280_REG_PRESS_LSB 0xF8 > #define BMP280_REG_PRESS_MSB 0xF7 > > -/* Helper mask to truncate excess 12 bits on pressure and temp readings */ > -#define BMP280_MEAS_TRIM_MASK GENMASK(31, 12) > +/* Helper mask to truncate excess 4 bits on pressure and temp readings */ > +#define BMP280_MEAS_TRIM_MASK GENMASK(24, 4) > > #define BMP280_REG_CONFIG 0xF5 > #define BMP280_REG_CTRL_MEAS 0xF4
diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c index 203623d32032..b6a16a580962 100644 --- a/drivers/iio/pressure/bmp280-core.c +++ b/drivers/iio/pressure/bmp280-core.c @@ -32,6 +32,8 @@ #include <linux/pm_runtime.h> #include <linux/random.h> +#include <asm/unaligned.h> + #include "bmp280.h" /* @@ -106,6 +108,21 @@ struct bmp280_data { * calculation. */ s32 t_fine; + + /* + * DMA (thus cache coherency maintenance) may require the + * transfer buffers to live in their own cache lines. + */ + union { + /* Sensor data buffer */ + u8 buf[3]; + /* Calibration data buffers */ + __le16 bmp280_cal_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; + __be16 bmp180_cal_buf[BMP180_REG_CALIB_COUNT / 2]; + /* Miscellaneous, endianess-aware data buffers */ + __le16 le16; + __be16 be16; + } __aligned(IIO_DMA_MINALIGN); }; struct bmp280_chip_info { @@ -160,13 +177,12 @@ static const struct iio_chan_spec bmp280_channels[] = { static int bmp280_read_calib(struct bmp280_data *data) { struct bmp280_calib *calib = &data->calib.bmp280; - __le16 c_buf[BMP280_CONTIGUOUS_CALIB_REGS / 2]; int ret; /* Read temperature and pressure calibration values. */ ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_TEMP_START, - c_buf, sizeof(c_buf)); + data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf)); if (ret < 0) { dev_err(data->dev, "failed to read temperature and pressure calibration parameters\n"); @@ -174,23 +190,23 @@ static int bmp280_read_calib(struct bmp280_data *data) } /* Toss the temperature and pressure calibration data into the entropy pool */ - add_device_randomness(c_buf, sizeof(c_buf)); + add_device_randomness(data->bmp280_cal_buf, sizeof(data->bmp280_cal_buf)); /* Parse temperature calibration values. */ - calib->T1 = le16_to_cpu(c_buf[T1]); - calib->T2 = le16_to_cpu(c_buf[T2]); - calib->T3 = le16_to_cpu(c_buf[T3]); + calib->T1 = le16_to_cpu(data->bmp280_cal_buf[T1]); + calib->T2 = le16_to_cpu(data->bmp280_cal_buf[T2]); + calib->T3 = le16_to_cpu(data->bmp280_cal_buf[T3]); /* Parse pressure calibration values. */ - calib->P1 = le16_to_cpu(c_buf[P1]); - calib->P2 = le16_to_cpu(c_buf[P2]); - calib->P3 = le16_to_cpu(c_buf[P3]); - calib->P4 = le16_to_cpu(c_buf[P4]); - calib->P5 = le16_to_cpu(c_buf[P5]); - calib->P6 = le16_to_cpu(c_buf[P6]); - calib->P7 = le16_to_cpu(c_buf[P7]); - calib->P8 = le16_to_cpu(c_buf[P8]); - calib->P9 = le16_to_cpu(c_buf[P9]); + calib->P1 = le16_to_cpu(data->bmp280_cal_buf[P1]); + calib->P2 = le16_to_cpu(data->bmp280_cal_buf[P2]); + calib->P3 = le16_to_cpu(data->bmp280_cal_buf[P3]); + calib->P4 = le16_to_cpu(data->bmp280_cal_buf[P4]); + calib->P5 = le16_to_cpu(data->bmp280_cal_buf[P5]); + calib->P6 = le16_to_cpu(data->bmp280_cal_buf[P6]); + calib->P7 = le16_to_cpu(data->bmp280_cal_buf[P7]); + calib->P8 = le16_to_cpu(data->bmp280_cal_buf[P8]); + calib->P9 = le16_to_cpu(data->bmp280_cal_buf[P9]); return 0; } @@ -200,8 +216,6 @@ static int bme280_read_calib(struct bmp280_data *data) struct bmp280_calib *calib = &data->calib.bmp280; struct device *dev = data->dev; unsigned int tmp; - __le16 l16; - __be16 b16; int ret; /* Load shared calibration params with bmp280 first */ @@ -226,12 +240,13 @@ static int bme280_read_calib(struct bmp280_data *data) } calib->H1 = tmp; - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, &l16, 2); + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H2, + &data->le16, sizeof(data->le16)); if (ret < 0) { dev_err(dev, "failed to read H2 comp value\n"); return ret; } - calib->H2 = sign_extend32(le16_to_cpu(l16), 15); + calib->H2 = sign_extend32(le16_to_cpu(data->le16), 15); ret = regmap_read(data->regmap, BMP280_REG_COMP_H3, &tmp); if (ret < 0) { @@ -240,20 +255,22 @@ static int bme280_read_calib(struct bmp280_data *data) } calib->H3 = tmp; - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, &b16, 2); + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H4, + &data->be16, sizeof(data->be16)); if (ret < 0) { dev_err(dev, "failed to read H4 comp value\n"); return ret; } - calib->H4 = sign_extend32(((be16_to_cpu(b16) >> 4) & 0xff0) | - (be16_to_cpu(b16) & 0xf), 11); + calib->H4 = sign_extend32(((be16_to_cpu(data->be16) >> 4) & 0xff0) | + (be16_to_cpu(data->be16) & 0xf), 11); - ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, &l16, 2); + ret = regmap_bulk_read(data->regmap, BMP280_REG_COMP_H5, + &data->le16, sizeof(data->le16)); if (ret < 0) { dev_err(dev, "failed to read H5 comp value\n"); return ret; } - calib->H5 = sign_extend32(FIELD_GET(BMP280_COMP_H5_MASK, le16_to_cpu(l16)), 11); + calib->H5 = sign_extend32(FIELD_GET(BMP280_COMP_H5_MASK, le16_to_cpu(data->le16)), 11); ret = regmap_read(data->regmap, BMP280_REG_COMP_H6, &tmp); if (ret < 0) { @@ -348,16 +365,16 @@ static int bmp280_read_temp(struct bmp280_data *data, int *val) { s32 adc_temp, comp_temp; - __be32 tmp = 0; int ret; - ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, &tmp, 3); + ret = regmap_bulk_read(data->regmap, BMP280_REG_TEMP_MSB, + data->buf, sizeof(data->buf)); if (ret < 0) { dev_err(data->dev, "failed to read temperature\n"); return ret; } - adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, be32_to_cpu(tmp)); + adc_temp = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf)); if (adc_temp == BMP280_TEMP_SKIPPED) { /* reading was skipped */ dev_err(data->dev, "reading temperature skipped\n"); @@ -381,7 +398,6 @@ static int bmp280_read_press(struct bmp280_data *data, int *val, int *val2) { u32 comp_press; - __be32 tmp = 0; s32 adc_press; int ret; @@ -390,13 +406,14 @@ static int bmp280_read_press(struct bmp280_data *data, if (ret < 0) return ret; - ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, &tmp, 3); + ret = regmap_bulk_read(data->regmap, BMP280_REG_PRESS_MSB, + data->buf, sizeof(data->buf)); if (ret < 0) { dev_err(data->dev, "failed to read pressure\n"); return ret; } - adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, be32_to_cpu(tmp)); + adc_press = FIELD_GET(BMP280_MEAS_TRIM_MASK, get_unaligned_be24(data->buf)); if (adc_press == BMP280_PRESS_SKIPPED) { /* reading was skipped */ dev_err(data->dev, "reading pressure skipped\n"); @@ -414,7 +431,6 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) { u32 comp_humidity; s32 adc_humidity; - __be16 tmp; int ret; /* Read and compensate temperature so we get a reading of t_fine. */ @@ -422,13 +438,14 @@ static int bmp280_read_humid(struct bmp280_data *data, int *val, int *val2) if (ret < 0) return ret; - ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, &tmp, 2); + ret = regmap_bulk_read(data->regmap, BMP280_REG_HUMIDITY_MSB, + &data->be16, sizeof(data->be16)); if (ret < 0) { dev_err(data->dev, "failed to read humidity\n"); return ret; } - adc_humidity = be16_to_cpu(tmp); + adc_humidity = be16_to_cpu(data->be16); if (adc_humidity == BMP280_HUMIDITY_SKIPPED) { /* reading was skipped */ dev_err(data->dev, "reading humidity skipped\n"); @@ -769,7 +786,6 @@ static int bmp180_measure(struct bmp280_data *data, u8 ctrl_meas) static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) { - __be16 tmp; int ret; ret = bmp180_measure(data, @@ -778,11 +794,12 @@ static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) if (ret) return ret; - ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 2); + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, + &data->be16, sizeof(data->be16)); if (ret) return ret; - *val = be16_to_cpu(tmp); + *val = be16_to_cpu(data->be16); return 0; } @@ -790,36 +807,36 @@ static int bmp180_read_adc_temp(struct bmp280_data *data, int *val) static int bmp180_read_calib(struct bmp280_data *data) { struct bmp180_calib *calib = &data->calib.bmp180; - __be16 buf[BMP180_REG_CALIB_COUNT / 2]; int ret; int i; - ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, buf, - sizeof(buf)); + ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START, + data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf)); if (ret < 0) return ret; /* None of the words has the value 0 or 0xFFFF */ - for (i = 0; i < ARRAY_SIZE(buf); i++) { - if (buf[i] == cpu_to_be16(0) || buf[i] == cpu_to_be16(0xffff)) + for (i = 0; i < ARRAY_SIZE(data->bmp180_cal_buf); i++) { + if (data->bmp180_cal_buf[i] == cpu_to_be16(0) || + data->bmp180_cal_buf[i] == cpu_to_be16(0xffff)) return -EIO; } /* Toss the calibration data into the entropy pool */ - add_device_randomness(buf, sizeof(buf)); - - calib->AC1 = be16_to_cpu(buf[AC1]); - calib->AC2 = be16_to_cpu(buf[AC2]); - calib->AC3 = be16_to_cpu(buf[AC3]); - calib->AC4 = be16_to_cpu(buf[AC4]); - calib->AC5 = be16_to_cpu(buf[AC5]); - calib->AC6 = be16_to_cpu(buf[AC6]); - calib->B1 = be16_to_cpu(buf[B1]); - calib->B2 = be16_to_cpu(buf[B2]); - calib->MB = be16_to_cpu(buf[MB]); - calib->MC = be16_to_cpu(buf[MC]); - calib->MD = be16_to_cpu(buf[MD]); + add_device_randomness(data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf)); + + calib->AC1 = be16_to_cpu(data->bmp180_cal_buf[AC1]); + calib->AC2 = be16_to_cpu(data->bmp180_cal_buf[AC2]); + calib->AC3 = be16_to_cpu(data->bmp180_cal_buf[AC3]); + calib->AC4 = be16_to_cpu(data->bmp180_cal_buf[AC4]); + calib->AC5 = be16_to_cpu(data->bmp180_cal_buf[AC5]); + calib->AC6 = be16_to_cpu(data->bmp180_cal_buf[AC6]); + calib->B1 = be16_to_cpu(data->bmp180_cal_buf[B1]); + calib->B2 = be16_to_cpu(data->bmp180_cal_buf[B2]); + calib->MB = be16_to_cpu(data->bmp180_cal_buf[MB]); + calib->MC = be16_to_cpu(data->bmp180_cal_buf[MC]); + calib->MD = be16_to_cpu(data->bmp180_cal_buf[MD]); return 0; } @@ -868,7 +885,6 @@ static int bmp180_read_temp(struct bmp280_data *data, int *val) static int bmp180_read_adc_press(struct bmp280_data *data, int *val) { u8 oss = data->oversampling_press; - __be32 tmp = 0; int ret; ret = bmp180_measure(data, @@ -878,11 +894,12 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val) if (ret) return ret; - ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, &tmp, 3); + ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB, + data->buf, sizeof(data->buf)); if (ret) return ret; - *val = (be32_to_cpu(tmp) >> 8) >> (8 - oss); + *val = get_unaligned_be24(data->buf) >> (8 - oss); return 0; } diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h index 03a539223417..c9214a7e5cc6 100644 --- a/drivers/iio/pressure/bmp280.h +++ b/drivers/iio/pressure/bmp280.h @@ -13,8 +13,8 @@ #define BMP280_REG_PRESS_LSB 0xF8 #define BMP280_REG_PRESS_MSB 0xF7 -/* Helper mask to truncate excess 12 bits on pressure and temp readings */ -#define BMP280_MEAS_TRIM_MASK GENMASK(31, 12) +/* Helper mask to truncate excess 4 bits on pressure and temp readings */ +#define BMP280_MEAS_TRIM_MASK GENMASK(24, 4) #define BMP280_REG_CONFIG 0xF5 #define BMP280_REG_CTRL_MEAS 0xF4
Adds DMA-safe buffers to driver data struct to store raw data from sensors The multiple buffers used thorough the driver share the same memory allocated as part of the device data instance. The union containing the buffers is aligned to allow safe usage with DMA operations, such as regmap bulk read calls. Updated measurement and calibration reading functions to use the safe DMA buffers. Suggested-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com> --- drivers/iio/pressure/bmp280-core.c | 131 ++++++++++++++++------------- drivers/iio/pressure/bmp280.h | 4 +- 2 files changed, 76 insertions(+), 59 deletions(-)