From patchwork Sat Jun 29 19:04:40 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Marcelo Schmitt X-Patchwork-Id: 13716988 Received: from mx0b-00128a01.pphosted.com (mx0a-00128a01.pphosted.com [148.163.135.77]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id CE35686636; Sat, 29 Jun 2024 19:05:19 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=148.163.135.77 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719687921; cv=none; b=MPrT9vlEgNdi3UK2SEVZuXOqk6/4riP4kFERAOn1Loscfd4uNHCv2guiqfcqsRwyHpXTWPHJdo1fmnN8C1eCLcemr4bNKldrPjAcZQE/necGlbsJhy8gjHS6BJx6P93B+DYTbhdSbyZWtZ9drf0ujJD+9AvNsn2wJzvw+vJCc28= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1719687921; c=relaxed/simple; bh=e/C8R8+GeBjP/3lzWt4dmGA/fFL2qdvIypLr+8Tq//8=; h=From:To:CC:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version:Content-Type; b=lq7Q6E1JU9MXHdsEcdqrKV1UXi/hftMwdgU5qA6mTQB6y62cC5yQ2SszzItVbsSqFhBphD5Q8+g4WhFRy5XCc7Mm+mBxl6c+WUpTjaDrDtjKQ3dZAf6oneRUwCb7w8Hl7WeElbotv63tlMpXzqB2UQO0vj+pt+fNhfFCMN3xGQo= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com; spf=pass smtp.mailfrom=analog.com; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b=xcsQISrp; arc=none smtp.client-ip=148.163.135.77 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=analog.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=analog.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=analog.com header.i=@analog.com header.b="xcsQISrp" Received: from pps.filterd (m0375855.ppops.net [127.0.0.1]) by mx0b-00128a01.pphosted.com (8.18.1.2/8.18.1.2) with ESMTP id 45T92kKH003733; Sat, 29 Jun 2024 15:05:03 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=analog.com; h=cc :content-transfer-encoding:content-type:date:from:in-reply-to :message-id:mime-version:references:subject:to; s=DKIM; bh=XxHoc IhLZgt1XMYqTo0cxS2GxaPCSePyTL6hhJ15S3g=; b=xcsQISrpfYpgvDneEWurS Nmhwk/RujWoQUB5V9zd8tIhCg06u8VIj0O3siA3+rBhYigL0jqn4eDbjSWqomVBd S6A+4tAuKAddzWMpYnBmMZNvNpW2qeXb9rTPn/tDhilEJazR2uAJRZjIlm9v3/nq Zv3AJFZhE7pD1mT6oiR7UfFxcQrqoIS4w7QE0Yu3tnJTWtBtTNh1kum9Zqlt11oy Vo/ag5FMLCaFSMgqZZueGGbkMi0DVsLOVWwybYcnDvlIb7KC2RlWVdkheiIqJabl SrM1Kyi/ft9hI9W26+Ab7Rjsl6Okw/2LNyOslAvVDtJcnu45vldB9I1i2RUfHis3 A== Received: from nwd2mta4.analog.com ([137.71.173.58]) by mx0b-00128a01.pphosted.com (PPS) with ESMTPS id 402f9u0ym4-1 (version=TLSv1.2 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=NOT); Sat, 29 Jun 2024 15:05:03 -0400 (EDT) Received: from ASHBMBX8.ad.analog.com (ASHBMBX8.ad.analog.com [10.64.17.5]) by nwd2mta4.analog.com (8.14.7/8.14.7) with ESMTP id 45TJ523s046801 (version=TLSv1/SSLv3 cipher=ECDHE-RSA-AES256-GCM-SHA384 bits=256 verify=FAIL); Sat, 29 Jun 2024 15:05:02 -0400 Received: from ASHBMBX8.ad.analog.com (10.64.17.5) by ASHBMBX8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server (version=TLS1_2, cipher=TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384) id 15.2.986.14; Sat, 29 Jun 2024 15:05:01 -0400 Received: from zeus.spd.analog.com (10.66.68.11) by ashbmbx8.ad.analog.com (10.64.17.5) with Microsoft SMTP Server id 15.2.986.14 via Frontend Transport; Sat, 29 Jun 2024 15:05:01 -0400 Received: from work.ad.analog.com (HYB-hERzalRezfV.ad.analog.com [10.65.205.129]) by zeus.spd.analog.com (8.15.1/8.15.1) with ESMTP id 45TJ4gAn001328; Sat, 29 Jun 2024 15:04:44 -0400 From: Marcelo Schmitt To: , , , , , , , , , , CC: , , , , Subject: [PATCH v6 1/7] spi: Enable controllers to extend the SPI protocol with MOSI idle configuration Date: Sat, 29 Jun 2024 16:04:40 -0300 Message-ID: <7eb23146ad6bf6090183c6340e4d59cb269d83a7.1719686465.git.marcelo.schmitt@analog.com> X-Mailer: git-send-email 2.30.2 In-Reply-To: References: Precedence: bulk X-Mailing-List: linux-iio@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-ADIRuleOP-NewSCL: Rule Triggered X-Proofpoint-ORIG-GUID: ljdyvD0VxO7uWNJHNo00xZtqNIQsHaA8 X-Proofpoint-GUID: ljdyvD0VxO7uWNJHNo00xZtqNIQsHaA8 X-Proofpoint-Virus-Version: vendor=baseguard engine=ICAP:2.0.293,Aquarius:18.0.1039,Hydra:6.0.680,FMLib:17.12.28.16 definitions=2024-06-29_08,2024-06-28_01,2024-05-17_01 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 suspectscore=0 phishscore=0 mlxlogscore=999 lowpriorityscore=0 mlxscore=0 clxscore=1015 spamscore=0 priorityscore=1501 adultscore=0 malwarescore=0 bulkscore=0 impostorscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.19.0-2406140001 definitions=main-2406290138 The behavior of an SPI controller data output line (SDO or MOSI or COPI (Controller Output Peripheral Input) for disambiguation) is usually not specified when the controller is not clocking out data on SCLK edges. However, there do exist SPI peripherals that require specific MOSI line state when data is not being clocked out of the controller. Conventional SPI controllers may set the MOSI line on SCLK edges then bring it low when no data is going out or leave the line the state of the last transfer bit. More elaborated controllers are capable to set the MOSI idle state according to different configurable levels and thus are more suitable for interfacing with demanding peripherals. Add SPI mode bits to allow peripherals to request explicit MOSI idle state when needed. When supporting a particular MOSI idle configuration, the data output line state is expected to remain at the configured level when the controller is not clocking out data. When a device that needs a specific MOSI idle state is identified, its driver should request the MOSI idle configuration by setting the proper SPI mode bit. Acked-by: Nuno Sa Signed-off-by: Marcelo Schmitt Reviewed-by: Jonathan Cameron Reviewed-by: David Lechner Tested-by: David Lechner --- Documentation/spi/spi-summary.rst | 83 +++++++++++++++++++++++++++++++ drivers/spi/spi.c | 7 +++ include/uapi/linux/spi/spi.h | 5 +- 3 files changed, 93 insertions(+), 2 deletions(-) diff --git a/Documentation/spi/spi-summary.rst b/Documentation/spi/spi-summary.rst index 7f8accfae6f9..6e21e6f86912 100644 --- a/Documentation/spi/spi-summary.rst +++ b/Documentation/spi/spi-summary.rst @@ -614,6 +614,89 @@ queue, and then start some asynchronous transfer engine (unless it's already running). +Extensions to the SPI protocol +------------------------------ +The fact that SPI doesn't have a formal specification or standard permits chip +manufacturers to implement the SPI protocol in slightly different ways. In most +cases, SPI protocol implementations from different vendors are compatible among +each other. For example, in SPI mode 0 (CPOL=0, CPHA=0) the bus lines may behave +like the following: + +:: + + nCSx ___ ___ + \_________________________________________________________________/ + • • + • • + SCLK ___ ___ ___ ___ ___ ___ ___ ___ + _______/ \___/ \___/ \___/ \___/ \___/ \___/ \___/ \_____ + • : ; : ; : ; : ; : ; : ; : ; : ; • + • : ; : ; : ; : ; : ; : ; : ; : ; • + MOSI XXX__________ _______ _______ ________XXX + 0xA5 XXX__/ 1 \_0_____/ 1 \_0_______0_____/ 1 \_0_____/ 1 \_XXX + • ; ; ; ; ; ; ; ; • + • ; ; ; ; ; ; ; ; • + MISO XXX__________ _______________________ _______ XXX + 0xBA XXX__/ 1 \_____0_/ 1 1 1 \_____0__/ 1 \____0__XXX + +Legend:: + + • marks the start/end of transmission; + : marks when data is clocked into the peripheral; + ; marks when data is clocked into the controller; + X marks when line states are not specified. + +In some few cases, chips extend the SPI protocol by specifying line behaviors +that other SPI protocols don't (e.g. data line state for when CS is not +asserted). Those distinct SPI protocols, modes, and configurations are supported +by different SPI mode flags. + +MOSI idle state configuration +^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ + +Common SPI protocol implementations don't specify any state or behavior for the +MOSI line when the controller is not clocking out data. However, there do exist +peripherals that require specific MOSI line state when data is not being clocked +out. For example, if the peripheral expects the MOSI line to be high when the +controller is not clocking out data (``SPI_MOSI_IDLE_HIGH``), then a transfer in +SPI mode 0 would look like the following: + +:: + + nCSx ___ ___ + \_________________________________________________________________/ + • • + • • + SCLK ___ ___ ___ ___ ___ ___ ___ ___ + _______/ \___/ \___/ \___/ \___/ \___/ \___/ \___/ \_____ + • : ; : ; : ; : ; : ; : ; : ; : ; • + • : ; : ; : ; : ; : ; : ; : ; : ; • + MOSI _____ _______ _______ _______________ ___ + 0x56 \_0_____/ 1 \_0_____/ 1 \_0_____/ 1 1 \_0_____/ + • ; ; ; ; ; ; ; ; • + • ; ; ; ; ; ; ; ; • + MISO XXX__________ _______________________ _______ XXX + 0xBA XXX__/ 1 \_____0_/ 1 1 1 \_____0__/ 1 \____0__XXX + +Legend:: + + • marks the start/end of transmission; + : marks when data is clocked into the peripheral; + ; marks when data is clocked into the controller; + X marks when line states are not specified. + +In this extension to the usual SPI protocol, the MOSI line state is specified to +be kept high when CS is asserted but the controller is not clocking out data to +the peripheral and also when CS is not asserted. + +Peripherals that require this extension must request it by setting the +``SPI_MOSI_IDLE_HIGH`` bit into the mode attribute of their ``struct +spi_device`` and call spi_setup(). Controllers that support this extension +should indicate it by setting ``SPI_MOSI_IDLE_HIGH`` in the mode_bits attribute +of their ``struct spi_controller``. The configuration to idle MOSI low is +analogous but uses the ``SPI_MOSI_IDLE_LOW`` mode bit. + + THANKS TO --------- Contributors to Linux-SPI discussions include (in alphabetical order, diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 93f59ebb5b79..c8ba5e490850 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -3942,6 +3942,12 @@ int spi_setup(struct spi_device *spi) (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL | SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL))) return -EINVAL; + /* Check against conflicting MOSI idle configuration */ + if ((spi->mode & SPI_MOSI_IDLE_LOW) && (spi->mode & SPI_MOSI_IDLE_HIGH)) { + dev_err(&spi->dev, + "setup: MOSI configured to idle low and high at the same time.\n"); + return -EINVAL; + } /* * Help drivers fail *cleanly* when they need options * that aren't supported with their current controller. @@ -3950,6 +3956,7 @@ int spi_setup(struct spi_device *spi) */ bad_bits = spi->mode & ~(spi->controller->mode_bits | SPI_CS_WORD | SPI_NO_TX | SPI_NO_RX); + ugly_bits = bad_bits & (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTAL | SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTAL); diff --git a/include/uapi/linux/spi/spi.h b/include/uapi/linux/spi/spi.h index ca56e477d161..ee4ac812b8f8 100644 --- a/include/uapi/linux/spi/spi.h +++ b/include/uapi/linux/spi/spi.h @@ -28,7 +28,8 @@ #define SPI_RX_OCTAL _BITUL(14) /* receive with 8 wires */ #define SPI_3WIRE_HIZ _BITUL(15) /* high impedance turnaround */ #define SPI_RX_CPHA_FLIP _BITUL(16) /* flip CPHA on Rx only xfer */ -#define SPI_MOSI_IDLE_LOW _BITUL(17) /* leave mosi line low when idle */ +#define SPI_MOSI_IDLE_LOW _BITUL(17) /* leave MOSI line low when idle */ +#define SPI_MOSI_IDLE_HIGH _BITUL(18) /* leave MOSI line high when idle */ /* * All the bits defined above should be covered by SPI_MODE_USER_MASK. @@ -38,6 +39,6 @@ * These bits must not overlap. A static assert check should make sure of that. * If adding extra bits, make sure to increase the bit index below as well. */ -#define SPI_MODE_USER_MASK (_BITUL(18) - 1) +#define SPI_MODE_USER_MASK (_BITUL(19) - 1) #endif /* _UAPI_SPI_H */