| Message ID | CAPUE2usOdzbHN7NN=Vg8FWE1kR2ayPYxV8qy05eB+bZgG6wD3w@mail.gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On Fri, Mar 29, 2019 at 1:41 AM Gwendal Grignou <gwendal@chromium.org> wrote: > > Add a IIO driver that reports the angle between the lid and the base for > ChromeOS convertible device. > > Tested on eve with ToT EC firmware. > Check driver is loaded and lid angle is correct. > > Change-Id: I3506be4a1405f108eebe6c1d3a3dbe975ca00519 drop. checkpatch.pl should report that. > Signed-off-by: Gwendal Grignou <gwendal@chromium.org> > --- > drivers/iio/common/cros_ec_sensors/Kconfig | 9 ++ > drivers/iio/common/cros_ec_sensors/Makefile | 1 + > .../cros_ec_sensors/cros_ec_lid_angle.c | 138 ++++++++++++++++++ > drivers/mfd/cros_ec_dev.c | 15 +- > 4 files changed, 160 insertions(+), 3 deletions(-) > create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c > > diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig > b/drivers/iio/common/cros_ec_sensors/Kconfig > index 135f6825903f..aacc2ab9c34f 100644 > --- a/drivers/iio/common/cros_ec_sensors/Kconfig > +++ b/drivers/iio/common/cros_ec_sensors/Kconfig > @@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS > Accelerometers, Gyroscope and Magnetometer that are > presented by the ChromeOS EC Sensor hub. > Creates an IIO device for each functions. > + > +config IIO_CROS_EC_SENSORS_LID_ANGLE > + tristate "ChromeOS EC Sensor for lid angle" > + depends on IIO_CROS_EC_SENSORS_CORE > + help > + Module to report the angle between lid and base for some > + convertible devices. > + This module is loaded when the EC can calculate the angle between the base > + and the lid. > diff --git a/drivers/iio/common/cros_ec_sensors/Makefile > b/drivers/iio/common/cros_ec_sensors/Makefile > index ec716ff2a775..a35ee232ac07 100644 > --- a/drivers/iio/common/cros_ec_sensors/Makefile > +++ b/drivers/iio/common/cros_ec_sensors/Makefile > @@ -4,3 +4,4 @@ > > obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o > obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o > +obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o > diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c > b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c > new file mode 100644 > index 000000000000..92be07d7fa36 > --- /dev/null > +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c > @@ -0,0 +1,138 @@ > +// SPDX-License-Identifier: GPL-2.0 > + > +/* > + * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor. > + * > + * Copyright 2018 Google, Inc > + * > + * This driver uses the cros-ec interface to communicate with the Chrome OS > + * EC about counter sensors. Counters are presented through > + * iio sysfs. > + */ > + > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/iio/buffer.h> > +#include <linux/iio/common/cros_ec_sensors_core.h> > +#include <linux/iio/iio.h> > +#include <linux/iio/kfifo_buf.h> > +#include <linux/iio/trigger.h> > +#include <linux/iio/triggered_buffer.h> > +#include <linux/iio/trigger_consumer.h> > +#include <linux/kernel.h> > +#include <linux/mfd/cros_ec.h> > +#include <linux/mfd/cros_ec_commands.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/slab.h> > + > +#define DRV_NAME "cros-ec-lid-angle" > + > +/* > + * One channel for the lid angle, the other for timestamp. > + */ > +static const struct iio_chan_spec cros_ec_lid_angle_channels[] = { > + { > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > + .scan_type.realbits = CROS_EC_SENSOR_BITS, > + .scan_type.storagebits = CROS_EC_SENSOR_BITS, > + .scan_type.sign = 'u', > + .type = IIO_ANGL > + }, > + IIO_CHAN_SOFT_TIMESTAMP(1) > +}; > + > +/* State data for ec_sensors iio driver. */ > +struct cros_ec_lid_angle_state { > + /* Shared by all sensors */ > + struct cros_ec_sensors_core_state core; > +}; > + > +static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev, > + unsigned long scan_mask, s16 *data) > +{ > + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); > + int ret; > + > + st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE; > + ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle)); > + if (ret) { > + dev_warn(&indio_dev->dev, "Unable to read lid angle\n"); > + return ret; > + } > + > + *data = st->resp->lid_angle.value; > + return 0; > +} > + > +static int cros_ec_lid_angle_read(struct iio_dev *indio_dev, > + struct iio_chan_spec const *chan, > + int *val, int *val2, long mask) > +{ > + struct cros_ec_lid_angle_state *st = iio_priv(indio_dev); > + s16 data; > + int ret; > + > + mutex_lock(&st->core.cmd_lock); > + ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data); > + if (ret) > + return ret; > + *val = data; > + mutex_unlock(&st->core.cmd_lock); > + return IIO_VAL_INT; > +} > + > +static const struct iio_info cros_ec_lid_angle_info = { > + .read_raw = &cros_ec_lid_angle_read, > +}; > + > +static int cros_ec_lid_angle_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct iio_dev *indio_dev; > + struct cros_ec_lid_angle_state *state; > + int ret; > + > + indio_dev = devm_iio_device_alloc(dev, sizeof(*state)); > + if (!indio_dev) > + return -ENOMEM; > + > + ret = cros_ec_sensors_core_init(pdev, indio_dev, false); > + if (ret) > + return ret; > + > + indio_dev->info = &cros_ec_lid_angle_info; > + state = iio_priv(indio_dev); > + indio_dev->channels = cros_ec_lid_angle_channels; > + indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels); > + > + state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle; > + > + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, > + cros_ec_sensors_capture, NULL); > + if (ret) > + return ret; > + > + return devm_iio_device_register(dev, indio_dev); > +} > + > +static const struct platform_device_id cros_ec_lid_angle_ids[] = { > + { > + .name = DRV_NAME, > + }, > + { /* sentinel */ } > +}; > +MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids); > + > +static struct platform_driver cros_ec_lid_angle_platform_driver = { > + .driver = { > + .name = DRV_NAME, > + .pm = &cros_ec_sensors_pm_ops, > + }, > + .probe = cros_ec_lid_angle_probe, > + .id_table = cros_ec_lid_angle_ids, > +}; > +module_platform_driver(cros_ec_lid_angle_platform_driver); > + > +MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle."); > +MODULE_LICENSE("GPL v2"); > diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c > index d275deaecb12..11b5b2fd1f33 100644 > --- a/drivers/mfd/cros_ec_dev.c > +++ b/drivers/mfd/cros_ec_dev.c > @@ -297,13 +297,17 @@ static void cros_ec_sensors_register(struct > cros_ec_dev *ec) > > resp = (struct ec_response_motion_sense *)msg->data; > sensor_num = resp->dump.sensor_count; > - /* Allocate 1 extra sensors in FIFO are needed */ > - sensor_cells = kcalloc(sensor_num + 1, sizeof(struct mfd_cell), > + /* > + * Allocate extra sensors if lid angle sensor or FIFO are needed. > + */ > +#define NUM_EXTRA_SENSORS 2 > + sensor_cells = kcalloc(sensor_num + NUM_EXTRA_SENSORS, > + sizeof(struct mfd_cell), > GFP_KERNEL); > if (sensor_cells == NULL) > goto error; > > - sensor_platforms = kcalloc(sensor_num + 1, > + sensor_platforms = kcalloc(sensor_num, Are you sure about this, or did "+ NUM_EXTRA_SENSORS" get lost ? > sizeof(struct cros_ec_sensor_platform), > GFP_KERNEL); > if (sensor_platforms == NULL) > @@ -363,6 +367,11 @@ static void cros_ec_sensors_register(struct > cros_ec_dev *ec) > sensor_cells[id].name = "cros-ec-ring"; > id++; > } > + if (cros_ec_check_features(ec, > + EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) { > + sensor_cells[id].name = "cros-ec-lid-angle"; > + id++; > + } > > ret = mfd_add_devices(ec->dev, 0, sensor_cells, id, > NULL, 0, NULL); > -- > 2.21.0.360.g471c308f928-goog
On Fri, Mar 29, 2019 at 6:44 AM Guenter Roeck <groeck@google.com> wrote: > > On Fri, Mar 29, 2019 at 1:41 AM Gwendal Grignou <gwendal@chromium.org> wrote: > > > > Add a IIO driver that reports the angle between the lid and the base for > > ChromeOS convertible device. > > > > Tested on eve with ToT EC firmware. > > Check driver is loaded and lid angle is correct. > > > > Change-Id: I3506be4a1405f108eebe6c1d3a3dbe975ca00519 > > drop. checkpatch.pl should report that. > > > Signed-off-by: Gwendal Grignou <gwendal@chromium.org> > > --- > > drivers/iio/common/cros_ec_sensors/Kconfig | 9 ++ > > drivers/iio/common/cros_ec_sensors/Makefile | 1 + > > .../cros_ec_sensors/cros_ec_lid_angle.c | 138 ++++++++++++++++++ > > drivers/mfd/cros_ec_dev.c | 15 +- > > 4 files changed, 160 insertions(+), 3 deletions(-) > > create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c > > > > diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig > > b/drivers/iio/common/cros_ec_sensors/Kconfig > > index 135f6825903f..aacc2ab9c34f 100644 > > --- a/drivers/iio/common/cros_ec_sensors/Kconfig > > +++ b/drivers/iio/common/cros_ec_sensors/Kconfig > > @@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS > > Accelerometers, Gyroscope and Magnetometer that are > > presented by the ChromeOS EC Sensor hub. > > Creates an IIO device for each functions. > > + > > +config IIO_CROS_EC_SENSORS_LID_ANGLE > > + tristate "ChromeOS EC Sensor for lid angle" > > + depends on IIO_CROS_EC_SENSORS_CORE > > + help > > + Module to report the angle between lid and base for some > > + convertible devices. > > + This module is loaded when the EC can calculate the angle between the base > > + and the lid. > > diff --git a/drivers/iio/common/cros_ec_sensors/Makefile > > b/drivers/iio/common/cros_ec_sensors/Makefile > > index ec716ff2a775..a35ee232ac07 100644 > > --- a/drivers/iio/common/cros_ec_sensors/Makefile > > +++ b/drivers/iio/common/cros_ec_sensors/Makefile > > @@ -4,3 +4,4 @@ > > > > obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o > > obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o > > +obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o > > diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c > > b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c > > new file mode 100644 > > index 000000000000..92be07d7fa36 > > --- /dev/null > > +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c > > @@ -0,0 +1,138 @@ > > +// SPDX-License-Identifier: GPL-2.0 > > + > > +/* > > + * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor. > > + * > > + * Copyright 2018 Google, Inc > > + * > > + * This driver uses the cros-ec interface to communicate with the Chrome OS > > + * EC about counter sensors. Counters are presented through > > + * iio sysfs. > > + */ > > + > > +#include <linux/delay.h> > > +#include <linux/device.h> > > +#include <linux/iio/buffer.h> > > +#include <linux/iio/common/cros_ec_sensors_core.h> > > +#include <linux/iio/iio.h> > > +#include <linux/iio/kfifo_buf.h> > > +#include <linux/iio/trigger.h> > > +#include <linux/iio/triggered_buffer.h> > > +#include <linux/iio/trigger_consumer.h> > > +#include <linux/kernel.h> > > +#include <linux/mfd/cros_ec.h> > > +#include <linux/mfd/cros_ec_commands.h> > > +#include <linux/module.h> > > +#include <linux/platform_device.h> > > +#include <linux/slab.h> > > + > > +#define DRV_NAME "cros-ec-lid-angle" > > + > > +/* > > + * One channel for the lid angle, the other for timestamp. > > + */ > > +static const struct iio_chan_spec cros_ec_lid_angle_channels[] = { > > + { > > + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), > > + .scan_type.realbits = CROS_EC_SENSOR_BITS, > > + .scan_type.storagebits = CROS_EC_SENSOR_BITS, > > + .scan_type.sign = 'u', > > + .type = IIO_ANGL > > + }, > > + IIO_CHAN_SOFT_TIMESTAMP(1) > > +}; > > + > > +/* State data for ec_sensors iio driver. */ > > +struct cros_ec_lid_angle_state { > > + /* Shared by all sensors */ > > + struct cros_ec_sensors_core_state core; > > +}; > > + > > +static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev, > > + unsigned long scan_mask, s16 *data) > > +{ > > + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); > > + int ret; > > + > > + st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE; > > + ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle)); > > + if (ret) { > > + dev_warn(&indio_dev->dev, "Unable to read lid angle\n"); > > + return ret; > > + } > > + > > + *data = st->resp->lid_angle.value; > > + return 0; > > +} > > + > > +static int cros_ec_lid_angle_read(struct iio_dev *indio_dev, > > + struct iio_chan_spec const *chan, > > + int *val, int *val2, long mask) > > +{ > > + struct cros_ec_lid_angle_state *st = iio_priv(indio_dev); > > + s16 data; > > + int ret; > > + > > + mutex_lock(&st->core.cmd_lock); > > + ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data); > > + if (ret) > > + return ret; > > + *val = data; > > + mutex_unlock(&st->core.cmd_lock); > > + return IIO_VAL_INT; > > +} > > + > > +static const struct iio_info cros_ec_lid_angle_info = { > > + .read_raw = &cros_ec_lid_angle_read, > > +}; > > + > > +static int cros_ec_lid_angle_probe(struct platform_device *pdev) > > +{ > > + struct device *dev = &pdev->dev; > > + struct iio_dev *indio_dev; > > + struct cros_ec_lid_angle_state *state; > > + int ret; > > + > > + indio_dev = devm_iio_device_alloc(dev, sizeof(*state)); > > + if (!indio_dev) > > + return -ENOMEM; > > + > > + ret = cros_ec_sensors_core_init(pdev, indio_dev, false); > > + if (ret) > > + return ret; > > + > > + indio_dev->info = &cros_ec_lid_angle_info; > > + state = iio_priv(indio_dev); > > + indio_dev->channels = cros_ec_lid_angle_channels; > > + indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels); > > + > > + state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle; > > + > > + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, > > + cros_ec_sensors_capture, NULL); > > + if (ret) > > + return ret; > > + > > + return devm_iio_device_register(dev, indio_dev); > > +} > > + > > +static const struct platform_device_id cros_ec_lid_angle_ids[] = { > > + { > > + .name = DRV_NAME, > > + }, > > + { /* sentinel */ } > > +}; > > +MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids); > > + > > +static struct platform_driver cros_ec_lid_angle_platform_driver = { > > + .driver = { > > + .name = DRV_NAME, > > + .pm = &cros_ec_sensors_pm_ops, > > + }, > > + .probe = cros_ec_lid_angle_probe, > > + .id_table = cros_ec_lid_angle_ids, > > +}; > > +module_platform_driver(cros_ec_lid_angle_platform_driver); > > + > > +MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle."); > > +MODULE_LICENSE("GPL v2"); > > diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c > > index d275deaecb12..11b5b2fd1f33 100644 > > --- a/drivers/mfd/cros_ec_dev.c > > +++ b/drivers/mfd/cros_ec_dev.c > > @@ -297,13 +297,17 @@ static void cros_ec_sensors_register(struct > > cros_ec_dev *ec) > > > > resp = (struct ec_response_motion_sense *)msg->data; > > sensor_num = resp->dump.sensor_count; > > - /* Allocate 1 extra sensors in FIFO are needed */ > > - sensor_cells = kcalloc(sensor_num + 1, sizeof(struct mfd_cell), > > + /* > > + * Allocate extra sensors if lid angle sensor or FIFO are needed. > > + */ > > +#define NUM_EXTRA_SENSORS 2 > > + sensor_cells = kcalloc(sensor_num + NUM_EXTRA_SENSORS, > > + sizeof(struct mfd_cell), > > GFP_KERNEL); > > if (sensor_cells == NULL) > > goto error; > > > > - sensor_platforms = kcalloc(sensor_num + 1, > > + sensor_platforms = kcalloc(sensor_num, > > Are you sure about this, or did "+ NUM_EXTRA_SENSORS" get lost ? You're right, that's not the patch I intended to send. Resending. > > > sizeof(struct cros_ec_sensor_platform), > > GFP_KERNEL); > > if (sensor_platforms == NULL) > > @@ -363,6 +367,11 @@ static void cros_ec_sensors_register(struct > > cros_ec_dev *ec) > > sensor_cells[id].name = "cros-ec-ring"; > > id++; > > } > > + if (cros_ec_check_features(ec, > > + EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) { > > + sensor_cells[id].name = "cros-ec-lid-angle"; > > + id++; > > + } > > > > ret = mfd_add_devices(ec->dev, 0, sensor_cells, id, > > NULL, 0, NULL); > > -- > > 2.21.0.360.g471c308f928-goog
diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig b/drivers/iio/common/cros_ec_sensors/Kconfig index 135f6825903f..aacc2ab9c34f 100644 --- a/drivers/iio/common/cros_ec_sensors/Kconfig +++ b/drivers/iio/common/cros_ec_sensors/Kconfig @@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS Accelerometers, Gyroscope and Magnetometer that are presented by the ChromeOS EC Sensor hub. Creates an IIO device for each functions. + +config IIO_CROS_EC_SENSORS_LID_ANGLE + tristate "ChromeOS EC Sensor for lid angle" + depends on IIO_CROS_EC_SENSORS_CORE + help + Module to report the angle between lid and base for some + convertible devices. + This module is loaded when the EC can calculate the angle between the base + and the lid. diff --git a/drivers/iio/common/cros_ec_sensors/Makefile b/drivers/iio/common/cros_ec_sensors/Makefile index ec716ff2a775..a35ee232ac07 100644 --- a/drivers/iio/common/cros_ec_sensors/Makefile +++ b/drivers/iio/common/cros_ec_sensors/Makefile @@ -4,3 +4,4 @@ obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o +obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c new file mode 100644 index 000000000000..92be07d7fa36 --- /dev/null +++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c @@ -0,0 +1,138 @@ +// SPDX-License-Identifier: GPL-2.0 + +/* + * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor. + * + * Copyright 2018 Google, Inc + * + * This driver uses the cros-ec interface to communicate with the Chrome OS + * EC about counter sensors. Counters are presented through + * iio sysfs. + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/iio/buffer.h> +#include <linux/iio/common/cros_ec_sensors_core.h> +#include <linux/iio/iio.h> +#include <linux/iio/kfifo_buf.h> +#include <linux/iio/trigger.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/kernel.h> +#include <linux/mfd/cros_ec.h> +#include <linux/mfd/cros_ec_commands.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#define DRV_NAME "cros-ec-lid-angle" + +/* + * One channel for the lid angle, the other for timestamp. + */ +static const struct iio_chan_spec cros_ec_lid_angle_channels[] = { + { + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .scan_type.realbits = CROS_EC_SENSOR_BITS, + .scan_type.storagebits = CROS_EC_SENSOR_BITS, + .scan_type.sign = 'u', + .type = IIO_ANGL + }, + IIO_CHAN_SOFT_TIMESTAMP(1) +}; + +/* State data for ec_sensors iio driver. */ +struct cros_ec_lid_angle_state { + /* Shared by all sensors */ + struct cros_ec_sensors_core_state core; +}; + +static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev, + unsigned long scan_mask, s16 *data) +{ + struct cros_ec_sensors_core_state *st = iio_priv(indio_dev); + int ret; + + st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE; + ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle)); + if (ret) { + dev_warn(&indio_dev->dev, "Unable to read lid angle\n"); + return ret; + } + + *data = st->resp->lid_angle.value; + return 0; +} + +static int cros_ec_lid_angle_read(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct cros_ec_lid_angle_state *st = iio_priv(indio_dev); + s16 data; + int ret; + + mutex_lock(&st->core.cmd_lock); + ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data); + if (ret) + return ret; + *val = data; + mutex_unlock(&st->core.cmd_lock); + return IIO_VAL_INT; +} + +static const struct iio_info cros_ec_lid_angle_info = { + .read_raw = &cros_ec_lid_angle_read, +}; + +static int cros_ec_lid_angle_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct iio_dev *indio_dev; + struct cros_ec_lid_angle_state *state; + int ret; + + indio_dev = devm_iio_device_alloc(dev, sizeof(*state)); + if (!indio_dev) + return -ENOMEM; + + ret = cros_ec_sensors_core_init(pdev, indio_dev, false); + if (ret) + return ret; + + indio_dev->info = &cros_ec_lid_angle_info; + state = iio_priv(indio_dev); + indio_dev->channels = cros_ec_lid_angle_channels; + indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels); + + state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle; + + ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL, + cros_ec_sensors_capture, NULL); + if (ret) + return ret; + + return devm_iio_device_register(dev, indio_dev); +} + +static const struct platform_device_id cros_ec_lid_angle_ids[] = { + { + .name = DRV_NAME, + }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids); + +static struct platform_driver cros_ec_lid_angle_platform_driver = { + .driver = { + .name = DRV_NAME, + .pm = &cros_ec_sensors_pm_ops, + }, + .probe = cros_ec_lid_angle_probe, + .id_table = cros_ec_lid_angle_ids, +}; +module_platform_driver(cros_ec_lid_angle_platform_driver); + +MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle."); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c index d275deaecb12..11b5b2fd1f33 100644 --- a/drivers/mfd/cros_ec_dev.c +++ b/drivers/mfd/cros_ec_dev.c @@ -297,13 +297,17 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec) resp = (struct ec_response_motion_sense *)msg->data; sensor_num = resp->dump.sensor_count; - /* Allocate 1 extra sensors in FIFO are needed */ - sensor_cells = kcalloc(sensor_num + 1, sizeof(struct mfd_cell), + /* + * Allocate extra sensors if lid angle sensor or FIFO are needed. + */ +#define NUM_EXTRA_SENSORS 2 + sensor_cells = kcalloc(sensor_num + NUM_EXTRA_SENSORS, + sizeof(struct mfd_cell), GFP_KERNEL); if (sensor_cells == NULL) goto error; - sensor_platforms = kcalloc(sensor_num + 1, + sensor_platforms = kcalloc(sensor_num, sizeof(struct cros_ec_sensor_platform), GFP_KERNEL);
Add a IIO driver that reports the angle between the lid and the base for ChromeOS convertible device. Tested on eve with ToT EC firmware. Check driver is loaded and lid angle is correct. Change-Id: I3506be4a1405f108eebe6c1d3a3dbe975ca00519 Signed-off-by: Gwendal Grignou <gwendal@chromium.org> --- drivers/iio/common/cros_ec_sensors/Kconfig | 9 ++ drivers/iio/common/cros_ec_sensors/Makefile | 1 + .../cros_ec_sensors/cros_ec_lid_angle.c | 138 ++++++++++++++++++ drivers/mfd/cros_ec_dev.c | 15 +- 4 files changed, 160 insertions(+), 3 deletions(-) create mode 100644 drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c if (sensor_platforms == NULL) @@ -363,6 +367,11 @@ static void cros_ec_sensors_register(struct cros_ec_dev *ec) sensor_cells[id].name = "cros-ec-ring"; id++; } + if (cros_ec_check_features(ec, + EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS)) { + sensor_cells[id].name = "cros-ec-lid-angle"; + id++; + } ret = mfd_add_devices(ec->dev, 0, sensor_cells, id, NULL, 0, NULL);