diff --git a/drivers/iio/common/cros_ec_sensors/Kconfig
b/drivers/iio/common/cros_ec_sensors/Kconfig
index 135f6825903f..aacc2ab9c34f 100644
--- a/drivers/iio/common/cros_ec_sensors/Kconfig
+++ b/drivers/iio/common/cros_ec_sensors/Kconfig
@@ -20,3 +20,12 @@ config IIO_CROS_EC_SENSORS
 	  Accelerometers, Gyroscope and Magnetometer that are
 	  presented by the ChromeOS EC Sensor hub.
 	  Creates an IIO device for each functions.
+
+config IIO_CROS_EC_SENSORS_LID_ANGLE
+	tristate "ChromeOS EC Sensor for lid angle"
+	depends on IIO_CROS_EC_SENSORS_CORE
+	help
+	  Module to report the angle between lid and base for some
+	  convertible devices.
+	  This module is loaded when the EC can calculate the angle between the base
+	  and the lid.
diff --git a/drivers/iio/common/cros_ec_sensors/Makefile
b/drivers/iio/common/cros_ec_sensors/Makefile
index ec716ff2a775..a35ee232ac07 100644
--- a/drivers/iio/common/cros_ec_sensors/Makefile
+++ b/drivers/iio/common/cros_ec_sensors/Makefile
@@ -4,3 +4,4 @@

 obj-$(CONFIG_IIO_CROS_EC_SENSORS_CORE) += cros_ec_sensors_core.o
 obj-$(CONFIG_IIO_CROS_EC_SENSORS) += cros_ec_sensors.o
+obj-$(CONFIG_IIO_CROS_EC_SENSORS_LID_ANGLE) += cros_ec_lid_angle.o
diff --git a/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
new file mode 100644
index 000000000000..92be07d7fa36
--- /dev/null
+++ b/drivers/iio/common/cros_ec_sensors/cros_ec_lid_angle.c
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * cros_ec_lid_angle - Driver for CrOS EC lid angle sensor.
+ *
+ * Copyright 2018 Google, Inc
+ *
+ * This driver uses the cros-ec interface to communicate with the Chrome OS
+ * EC about counter sensors. Counters are presented through
+ * iio sysfs.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/iio/buffer.h>
+#include <linux/iio/common/cros_ec_sensors_core.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/triggered_buffer.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/kernel.h>
+#include <linux/mfd/cros_ec.h>
+#include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define DRV_NAME "cros-ec-lid-angle"
+
+/*
+ * One channel for the lid angle, the other for timestamp.
+ */
+static const struct iio_chan_spec cros_ec_lid_angle_channels[] = {
+	{
+		.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
+		.scan_type.realbits = CROS_EC_SENSOR_BITS,
+		.scan_type.storagebits = CROS_EC_SENSOR_BITS,
+		.scan_type.sign = 'u',
+		.type = IIO_ANGL
+	},
+	IIO_CHAN_SOFT_TIMESTAMP(1)
+};
+
+/* State data for ec_sensors iio driver. */
+struct cros_ec_lid_angle_state {
+	/* Shared by all sensors */
+	struct cros_ec_sensors_core_state core;
+};
+
+static int cros_ec_sensors_read_lid_angle(struct iio_dev *indio_dev,
+					  unsigned long scan_mask, s16 *data)
+{
+	struct cros_ec_sensors_core_state *st = iio_priv(indio_dev);
+	int ret;
+
+	st->param.cmd = MOTIONSENSE_CMD_LID_ANGLE;
+	ret = cros_ec_motion_send_host_cmd(st, sizeof(st->resp->lid_angle));
+	if (ret) {
+		dev_warn(&indio_dev->dev, "Unable to read lid angle\n");
+		return ret;
+	}
+
+	*data = st->resp->lid_angle.value;
+	return 0;
+}
+
+static int cros_ec_lid_angle_read(struct iio_dev *indio_dev,
+				    struct iio_chan_spec const *chan,
+				    int *val, int *val2, long mask)
+{
+	struct cros_ec_lid_angle_state *st = iio_priv(indio_dev);
+	s16 data;
+	int ret;
+
+	mutex_lock(&st->core.cmd_lock);
+	ret = cros_ec_sensors_read_lid_angle(indio_dev, 1, &data);
+	if (ret)
+		return ret;
+	*val = data;
+	mutex_unlock(&st->core.cmd_lock);
+	return IIO_VAL_INT;
+}
+
+static const struct iio_info cros_ec_lid_angle_info = {
+	.read_raw = &cros_ec_lid_angle_read,
+};
+
+static int cros_ec_lid_angle_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct iio_dev *indio_dev;
+	struct cros_ec_lid_angle_state *state;
+	int ret;
+
+	indio_dev = devm_iio_device_alloc(dev, sizeof(*state));
+	if (!indio_dev)
+		return -ENOMEM;
+
+	ret = cros_ec_sensors_core_init(pdev, indio_dev, false);
+	if (ret)
+		return ret;
+
+	indio_dev->info = &cros_ec_lid_angle_info;
+	state = iio_priv(indio_dev);
+	indio_dev->channels = cros_ec_lid_angle_channels;
+	indio_dev->num_channels = ARRAY_SIZE(cros_ec_lid_angle_channels);
+
+	state->core.read_ec_sensors_data = cros_ec_sensors_read_lid_angle;
+
+	ret = devm_iio_triggered_buffer_setup(dev, indio_dev, NULL,
+			cros_ec_sensors_capture, NULL);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(dev, indio_dev);
+}
+
+static const struct platform_device_id cros_ec_lid_angle_ids[] = {
+	{
+		.name = DRV_NAME,
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(platform, cros_ec_lid_angle_ids);
+
+static struct platform_driver cros_ec_lid_angle_platform_driver = {
+	.driver = {
+		.name	= DRV_NAME,
+		.pm	= &cros_ec_sensors_pm_ops,
+	},
+	.probe		= cros_ec_lid_angle_probe,
+	.id_table	= cros_ec_lid_angle_ids,
+};
+module_platform_driver(cros_ec_lid_angle_platform_driver);
+
+MODULE_DESCRIPTION("ChromeOS EC driver for reporting convertible lid angle.");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mfd/cros_ec_dev.c b/drivers/mfd/cros_ec_dev.c
index d275deaecb12..11b5b2fd1f33 100644
--- a/drivers/mfd/cros_ec_dev.c
+++ b/drivers/mfd/cros_ec_dev.c
@@ -297,13 +297,17 @@ static void cros_ec_sensors_register(struct
cros_ec_dev *ec)

 	resp = (struct ec_response_motion_sense *)msg->data;
 	sensor_num = resp->dump.sensor_count;
-	/* Allocate 1 extra sensors in FIFO are needed */
-	sensor_cells = kcalloc(sensor_num + 1, sizeof(struct mfd_cell),
+	/*
+	 * Allocate extra sensors if lid angle sensor or FIFO are needed.
+	 */
+#define NUM_EXTRA_SENSORS 2
+	sensor_cells = kcalloc(sensor_num + NUM_EXTRA_SENSORS,
+			       sizeof(struct mfd_cell),
 			       GFP_KERNEL);
 	if (sensor_cells == NULL)
 		goto error;

-	sensor_platforms = kcalloc(sensor_num + 1,
+	sensor_platforms = kcalloc(sensor_num,
 				   sizeof(struct cros_ec_sensor_platform),
 				   GFP_KERNEL);
