diff mbox series

[v2,2/2] dt-bindings: iio: adc: devicetree bindings for texas instruments ads7142

Message ID a8200f9ce6a4b3fdf5a9b1e61bbc7c4ced8361b6.1621105931.git.info@ministro.hu (mailing list archive)
State New, archived
Headers show
Series [v2,1/2] iio: adc: driver for texas instruments ads7142 | expand

Commit Message

József Horváth May 16, 2021, 7:31 a.m. UTC
This is a device tree schema for iio driver for
 Texas Instruments ADS7142 dual-channel, programmable sensor monitor.

Datasheet: https://www.ti.com/lit/ds/symlink/ads7142.pdf

Signed-off-by: Jozsef Horvath <info@ministro.hu>
---

changes v1
  - Redundant parameters (ti,threshold-rising, etc.)
    are removed
  - Supply name changed(vref -> avdd)
  - Added dvdd supply
  - All the properties are removed with prefix "ti,"
changes v2
  - "ti,prealert-count" parameter added, just for completeness.
---
 .../bindings/iio/adc/ti,ads7142.yaml          | 110 ++++++++++++++++++
 1 file changed, 110 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml

Comments

Jonathan Cameron May 16, 2021, 9:57 a.m. UTC | #1
On Sun, 16 May 2021 07:31:05 +0000
Jozsef Horvath <info@ministro.hu> wrote:

> This is a device tree schema for iio driver for
>  Texas Instruments ADS7142 dual-channel, programmable sensor monitor.
> 
> Datasheet: https://www.ti.com/lit/ds/symlink/ads7142.pdf
> 
> Signed-off-by: Jozsef Horvath <info@ministro.hu>

Hi József,

A few comments inline.

thanks,

Jonathan
> ---
> 
> changes v1
>   - Redundant parameters (ti,threshold-rising, etc.)
>     are removed
>   - Supply name changed(vref -> avdd)
>   - Added dvdd supply
>   - All the properties are removed with prefix "ti,"
> changes v2
>   - "ti,prealert-count" parameter added, just for completeness.
> ---
>  .../bindings/iio/adc/ti,ads7142.yaml          | 110 ++++++++++++++++++
>  1 file changed, 110 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
> new file mode 100644
> index 000000000000..6e52079c68f7
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
> @@ -0,0 +1,110 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/iio/adc/ti,ads7142.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Texas Instruments ADS7142 adc driver device tree bindings

ADC

> +
> +maintainers:
> +  - József Horváth <info@ministro.hu>
> +
> +description: |
> +  This document is for describing the required device tree parameters
> +   for ads7142 adc

ADC

> +  The required parameters for proper operation are described below.
> +
> +  Datasheet: https://www.ti.com/lit/ds/symlink/ads7142.pdf
> +
> +properties:
> +  compatible:
> +    const: ti,ads7142
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    description: |
> +      The BUSY/PDY pin is used as interrupt line

RDY ?

> +       in autonomous monitoring mode.
> +    maxItems: 1
> +
> +  avdd-supply:
> +    description: Regulator for the reference voltage
> +
> +  dvdd-supply: true
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 0
> +
> +  "#io-channel-cells":
> +    const: 1
> +
> +  ti,prealert-count:
> +    description: |
> +      Sets the Pre-Alert Event Count for both,
> +       high and low comparators, for both the channels.

Interesting.  Why is this a device tree property rather than something
we want to configure from userspace?  Looks like it would map to _period
after scaling by the sampling frequency.

https://elixir.bootlin.com/linux/latest/source/Documentation/ABI/testing/sysfs-bus-iio#L1003


> +    $ref: /schemas/types.yaml#/definitions/uint32
> +    maximum: 15
> +    minimum: 0
> +
> +patternProperties:
> +  "^channel@[0-1]$":
> +    $ref: "adc.yaml"
> +    type: object
> +    description: |
> +      Represents the external channels which are connected to the ADC.
> +    properties:
> +      reg:
> +        description: |
> +          The channel number.
> +        items:
> +          minimum: 0
> +          maximum: 1

enum: [0 1]
is a more compact way of putting this IIRC.
 
> +
> +    required:
> +      - reg
> +
> +    additionalProperties: false
> +
> +required:
> +  - compatible
> +  - "#io-channel-cells"
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    i2c {
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      adc@1f {
> +        compatible = "ti,ads7142";
> +        reg = <0x1f>;
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        #io-channel-cells = <1>;
> +
> +        avdd-supply = <&vdd_3v3_reg>;
> +        dvdd-supply = <&vdd_1v8_reg>;
> +
> +        interrupt-parent = <&gpio>;
> +        interrupts = <7 2>;
> +
> +        ti,prealert-count = <4>;
> +
> +        channel@0 {
> +          reg = <0>;
> +        };
> +
> +        channel@1 {
> +          reg = <1>;
> +        };
> +      };
> +    };
> +...
> +
József Horváth May 16, 2021, 12:30 p.m. UTC | #2
Hi Jonathan,

On Sun, May 16, 2021 at 10:57:20AM +0100, Jonathan Cameron wrote:
> On Sun, 16 May 2021 07:31:05 +0000
> Jozsef Horvath <info@ministro.hu> wrote:
> 
> > This is a device tree schema for iio driver for
> >  Texas Instruments ADS7142 dual-channel, programmable sensor monitor.
> > 
> > Datasheet: https://www.ti.com/lit/ds/symlink/ads7142.pdf
> > 
> > Signed-off-by: Jozsef Horvath <info@ministro.hu>
> 
> Hi József,
> 
> A few comments inline.
> 
> thanks,
> 
> Jonathan
> > ---
> > 
> > changes v1
> >   - Redundant parameters (ti,threshold-rising, etc.)
> >     are removed
> >   - Supply name changed(vref -> avdd)
> >   - Added dvdd supply
> >   - All the properties are removed with prefix "ti,"
> > changes v2
> >   - "ti,prealert-count" parameter added, just for completeness.
> > ---
> >  .../bindings/iio/adc/ti,ads7142.yaml          | 110 ++++++++++++++++++
> >  1 file changed, 110 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
> > new file mode 100644
> > index 000000000000..6e52079c68f7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
> > @@ -0,0 +1,110 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: "http://devicetree.org/schemas/iio/adc/ti,ads7142.yaml#"
> > +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> > +
> > +title: Texas Instruments ADS7142 adc driver device tree bindings
> 
> ADC
> 
> > +
> > +maintainers:
> > +  - József Horváth <info@ministro.hu>
> > +
> > +description: |
> > +  This document is for describing the required device tree parameters
> > +   for ads7142 adc
> 
> ADC
> 
> > +  The required parameters for proper operation are described below.
> > +
> > +  Datasheet: https://www.ti.com/lit/ds/symlink/ads7142.pdf
> > +
> > +properties:
> > +  compatible:
> > +    const: ti,ads7142
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    description: |
> > +      The BUSY/PDY pin is used as interrupt line
> 
> RDY ?

I'll fix these typos in v3

> 
> > +       in autonomous monitoring mode.
> > +    maxItems: 1
> > +
> > +  avdd-supply:
> > +    description: Regulator for the reference voltage
> > +
> > +  dvdd-supply: true
> > +
> > +  "#address-cells":
> > +    const: 1
> > +
> > +  "#size-cells":
> > +    const: 0
> > +
> > +  "#io-channel-cells":
> > +    const: 1
> > +
> > +  ti,prealert-count:
> > +    description: |
> > +      Sets the Pre-Alert Event Count for both,
> > +       high and low comparators, for both the channels.
> 
> Interesting.  Why is this a device tree property rather than something
> we want to configure from userspace?  Looks like it would map to _period
> after scaling by the sampling frequency.
> 
> https://elixir.bootlin.com/linux/latest/source/Documentation/ABI/testing/sysfs-bus-iio#L1003
> 
> 

Ok, I'll try to bring it to sysfs as you suggested

> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +    maximum: 15
> > +    minimum: 0
> > +
> > +patternProperties:
> > +  "^channel@[0-1]$":
> > +    $ref: "adc.yaml"
> > +    type: object
> > +    description: |
> > +      Represents the external channels which are connected to the ADC.
> > +    properties:
> > +      reg:
> > +        description: |
> > +          The channel number.
> > +        items:
> > +          minimum: 0
> > +          maximum: 1
> 
> enum: [0 1]
> is a more compact way of putting this IIRC.
>  

I'll do that

> > +
> > +    required:
> > +      - reg
> > +
> > +    additionalProperties: false
> > +
> > +required:
> > +  - compatible
> > +  - "#io-channel-cells"
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    i2c {
> > +      #address-cells = <1>;
> > +      #size-cells = <0>;
> > +      adc@1f {
> > +        compatible = "ti,ads7142";
> > +        reg = <0x1f>;
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +
> > +        #io-channel-cells = <1>;
> > +
> > +        avdd-supply = <&vdd_3v3_reg>;
> > +        dvdd-supply = <&vdd_1v8_reg>;
> > +
> > +        interrupt-parent = <&gpio>;
> > +        interrupts = <7 2>;
> > +
> > +        ti,prealert-count = <4>;
> > +
> > +        channel@0 {
> > +          reg = <0>;
> > +        };
> > +
> > +        channel@1 {
> > +          reg = <1>;
> > +        };
> > +      };
> > +    };
> > +...
> > +
> 

Thank you.

Best regards
József
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml b/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
new file mode 100644
index 000000000000..6e52079c68f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti,ads7142.yaml
@@ -0,0 +1,110 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/ti,ads7142.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Texas Instruments ADS7142 adc driver device tree bindings
+
+maintainers:
+  - József Horváth <info@ministro.hu>
+
+description: |
+  This document is for describing the required device tree parameters
+   for ads7142 adc
+  The required parameters for proper operation are described below.
+
+  Datasheet: https://www.ti.com/lit/ds/symlink/ads7142.pdf
+
+properties:
+  compatible:
+    const: ti,ads7142
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    description: |
+      The BUSY/PDY pin is used as interrupt line
+       in autonomous monitoring mode.
+    maxItems: 1
+
+  avdd-supply:
+    description: Regulator for the reference voltage
+
+  dvdd-supply: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#io-channel-cells":
+    const: 1
+
+  ti,prealert-count:
+    description: |
+      Sets the Pre-Alert Event Count for both,
+       high and low comparators, for both the channels.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    maximum: 15
+    minimum: 0
+
+patternProperties:
+  "^channel@[0-1]$":
+    $ref: "adc.yaml"
+    type: object
+    description: |
+      Represents the external channels which are connected to the ADC.
+    properties:
+      reg:
+        description: |
+          The channel number.
+        items:
+          minimum: 0
+          maximum: 1
+
+    required:
+      - reg
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - "#io-channel-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      adc@1f {
+        compatible = "ti,ads7142";
+        reg = <0x1f>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        #io-channel-cells = <1>;
+
+        avdd-supply = <&vdd_3v3_reg>;
+        dvdd-supply = <&vdd_1v8_reg>;
+
+        interrupt-parent = <&gpio>;
+        interrupts = <7 2>;
+
+        ti,prealert-count = <4>;
+
+        channel@0 {
+          reg = <0>;
+        };
+
+        channel@1 {
+          reg = <1>;
+        };
+      };
+    };
+...
+