diff mbox series

[5/5] iio: pressure: bmp280: Add nvmem operations for BMP580

Message ID b902ef9ee60a6dd05f002916853ba23826eccf9a.1671986815.git.ang.iglesiasg@gmail.com (mailing list archive)
State Changes Requested
Headers show
Series Add support for pressure sensor Bosch BMP580 | expand

Commit Message

Angel Iglesias Dec. 25, 2022, 5 p.m. UTC 
The pressure sensor BMP580 contains a non-volatile memory that stores
trimming and configuration params. That memory provides an programmable
user range of three 2-byte words.

Signed-off-by: Angel Iglesias <ang.iglesiasg@gmail.com>
diff mbox series

Patch

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 005dbaf18607..4e0d89a71eab 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -28,6 +28,7 @@ 
 #include <linux/bitfield.h>
 #include <linux/device.h>
 #include <linux/module.h>
+#include <linux/nvmem-provider.h>
 #include <linux/regmap.h>
 #include <linux/delay.h>
 #include <linux/iio/iio.h>
@@ -1628,8 +1629,140 @@  static const int bmp580_odr_table[][2] = {
 	[BMP580_ODR_0_125HZ] =	{0, 125000},
 };
 
+const int bmp580_nvmem_addrs[] = { 0x20, 0x21, 0x22 };
+
+static int bmp580_nvmem_read(void *priv, unsigned int offset, void *val,
+			     size_t bytes)
+{
+	struct bmp280_data *data = priv;
+	u16 *dst = val;
+	int ret, addr;
+
+	pm_runtime_get_sync(data->dev);
+	mutex_lock(&data->lock);
+
+	/* Set sensor in standby mode */
+	ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
+				 BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
+				 BMP580_ODR_DEEPSLEEP_DIS |
+				 FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
+	if (ret) {
+		dev_err(data->dev, "failed to change sensor to standby mode\n");
+		return ret;
+	}
+	/* Wait standby transition time */
+	usleep_range(2500, 3000);
+
+	while (bytes >= sizeof(u16)) {
+		addr = bmp580_nvmem_addrs[offset / sizeof(u16)];
+
+		ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR,
+				   FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
+		if (ret) {
+			dev_err(data->dev, "error writing nvm address\n");
+			goto exit;
+		}
+
+		ret = bmp580_cmd(data, BMP580_NVM_READ_CMD);
+		if (ret)
+			goto exit;
+
+		ret = regmap_bulk_read(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16,
+				       sizeof(data->le16));
+		if (ret) {
+			dev_err(data->dev, "error reading nvm data regs\n");
+			goto exit;
+		}
+
+		*dst++ = le16_to_cpu(data->le16);
+		bytes -= sizeof(u16);
+		offset += sizeof(u16);
+	}
+exit:
+	/* Restore chip config */
+	data->chip_info->chip_config(data);
+	mutex_unlock(&data->lock);
+	pm_runtime_mark_last_busy(data->dev);
+	pm_runtime_put_autosuspend(data->dev);
+	return ret;
+}
+
+static int bmp580_nvmem_write(void *priv, unsigned int offset, void *val,
+			      size_t bytes)
+{
+	struct bmp280_data *data = priv;
+	u16 *buf = val;
+	int ret, addr;
+
+	pm_runtime_get_sync(data->dev);
+	mutex_lock(&data->lock);
+
+	/* Set sensor in standby mode */
+	ret = regmap_update_bits(data->regmap, BMP580_REG_ODR_CONFIG,
+				 BMP580_MODE_MASK | BMP580_ODR_DEEPSLEEP_DIS,
+				 BMP580_ODR_DEEPSLEEP_DIS |
+				 FIELD_PREP(BMP580_MODE_MASK, BMP580_MODE_SLEEP));
+	if (ret) {
+		dev_err(data->dev, "failed to change sensor to standby mode\n");
+		return ret;
+	}
+	/* Wait standby transition time */
+	usleep_range(2500, 3000);
+
+	while (bytes >= sizeof(u16)) {
+		addr = bmp580_nvmem_addrs[offset / sizeof(u16)];
+
+		ret = regmap_write(data->regmap, BMP580_REG_NVM_ADDR, BMP580_NVM_PROG_EN |
+				   FIELD_PREP(BMP580_NVM_ROW_ADDR_MASK, addr));
+		if (ret) {
+			dev_err(data->dev, "error writing nvm address\n");
+			goto exit;
+		}
+		data->le16 = cpu_to_le16(*buf++);
+
+		ret = regmap_bulk_write(data->regmap, BMP580_REG_NVM_DATA_LSB, &data->le16,
+					sizeof(data->le16));
+		if (ret) {
+			dev_err(data->dev, "error writing LSB NVM data regs\n");
+			goto exit;
+		}
+
+		ret = bmp580_cmd(data, BMP580_NVM_WRITE_CMD);
+		if (ret)
+			goto exit;
+
+		/* Disable programming mode bit */
+		ret = regmap_update_bits(data->regmap, BMP580_REG_NVM_ADDR,
+					 BMP580_NVM_PROG_EN, 0);
+		if (ret) {
+			dev_err(data->dev, "error resetting nvm write\n");
+			goto exit;
+		}
+
+		bytes -= sizeof(u16);
+		offset += sizeof(u16);
+	}
+exit:
+	/* Restore chip config */
+	data->chip_info->chip_config(data);
+	mutex_unlock(&data->lock);
+	pm_runtime_mark_last_busy(data->dev);
+	pm_runtime_put_autosuspend(data->dev);
+	return ret;
+}
+
 static int bmp580_preinit(struct bmp280_data *data)
 {
+	struct nvmem_config config = {
+		.dev = data->dev,
+		.priv = data,
+		.name = "bmp580_nvmem",
+		.word_size = sizeof(u16),
+		.stride = sizeof(u16),
+		.size = 3 * sizeof(u16),
+		.reg_read = bmp580_nvmem_read,
+		.reg_write = bmp580_nvmem_write,
+	};
 	unsigned int reg;
 	int ret;
 
@@ -1653,8 +1786,8 @@  static int bmp580_preinit(struct bmp280_data *data)
 		dev_err(data->dev, "preinit: nvm error on powerup sequence\n");
 		return ret;
 	}
-
-	return 0;
+	/* Register nvmem device */
+	return PTR_ERR_OR_ZERO(devm_nvmem_register(config.dev, &config));
 }
 
 static int bmp580_chip_config(struct bmp280_data *data)
diff --git a/drivers/iio/pressure/bmp280.h b/drivers/iio/pressure/bmp280.h
index 27d2abc17d01..e2a093a4f767 100644
--- a/drivers/iio/pressure/bmp280.h
+++ b/drivers/iio/pressure/bmp280.h
@@ -101,6 +101,9 @@ 
 #define BMP580_FILTER_63X		6
 #define BMP580_FILTER_127X		7
 
+#define BMP580_NVM_ROW_ADDR_MASK	GENMASK(5, 0)
+#define BMP580_NVM_PROG_EN		BIT(6)
+
 #define BMP580_TEMP_SKIPPED		0x7f7f7f
 #define BMP580_PRESS_SKIPPED		0x7f7f7f