mbox series

[v3,0/4] HID: wiiu-drc: Add a driver for the Wii U gamepad

Message ID 20210519085924.1636-1-linkmauve@linkmauve.fr (mailing list archive)
Headers show
Series HID: wiiu-drc: Add a driver for the Wii U gamepad | expand


Emmanuel Gil Peyrot May 19, 2021, 8:59 a.m. UTC
This driver is for the DRC (wireless gamepad) when plugged to the DRH of
the Wii U, a chip exposing it as a USB device.

I tried to use this driver on master over usbip on my laptop, but usbip
disconnects the device right after the driver created the
/dev/input/event* files, so instead I have only tested this driver on
the 4.19 branch of the linux-wiiu[1] downstream.

Other than that, pretty much all of the HID parts of the gamepad work,
it’s only missing microphone, camera and NFC input now but those are
mostly standard (read require quirks) and pertain to other subsystems,
so I felt like this can be upstreamed already.

[1] https://gitlab.com/linux-wiiu/linux-wiiu

Changes since v1:
- Rename interfaces to be less redundant.
- Add comments for potentially unclear things.
- Reword some commits to include more needed information.
- Include all needed includes.
- Use helpful helper functions instead of (badly) reimplementing them
- Always return the correct type for each function, to avoid some
  bool/int confusion, or returning 0 to mean error.
- Use myself as the module author, even though Ash did most of the
  initial work, I’m the one who will be maintaining this module from now
- Use input_set_capability() instead of set_bit(…, keybit) to also set
  BIT(EV_KEY) on evbit[0].
- Call hid_hw_start() before input_register_device() but after the setup
  functions, so that hid_hw_open() is never called before it.
- Add missing spin_lock_init() for the battery lock.
- Use a static atomic for the drc_num, and remove the comment about
  using the interface number.
- Interpret battery report as the voltage coming from an ADC, instead of
  the completely wrong ENERGY_NOW it was before.

So basically addressing Jonathan’s and Barnabás’ comments. :)

Changes since v2:
- Guard against the possibility of CONFIG_HID_BATTERY_STRENGTH not
  having been selected.
- Include forgotten linux/fixp-arith.h header.
- Fix a warning in clamp() due to comparing a s16 with a #define.

Ash Logan (1):
  HID: wiiu-drc: Add a driver for this gamepad

Emmanuel Gil Peyrot (3):
  HID: wiiu-drc: Implement touch reports
  HID: wiiu-drc: Add accelerometer, gyroscope and magnetometer readings
  HID: wiiu-drc: Add battery reporting

 drivers/hid/Kconfig        |   7 +
 drivers/hid/Makefile       |   1 +
 drivers/hid/hid-ids.h      |   1 +
 drivers/hid/hid-quirks.c   |   3 +
 drivers/hid/hid-wiiu-drc.c | 564 +++++++++++++++++++++++++++++++++++++
 5 files changed, 576 insertions(+)
 create mode 100644 drivers/hid/hid-wiiu-drc.c