| Message ID | 20250415-dev-adp5589-fw-v2-0-3a799c3ed812@analog.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | mfd: adp5585: support keymap events and drop legacy Input driver | expand |
Hi Nuno, On Tue, Apr 15, 2025 at 03:49:16PM +0100, Nuno Sá via B4 Relay wrote: > The adp5585 MFD driver was introduced in 6.11 adding support for gpio > and PWM. However, the gpio part of it was already supported as part of > the keyboard driver: > > https://elixir.bootlin.com/linux/v6.14-rc6/source/drivers/input/keyboard/adp5589-keys.c#L532 > > On top of that it also overlapped with my refactoring of the above driver [1] > to drop usage of platform data and use FW properties instead. > > Now, it actually makes sense for this device to be supported under MFD > and since the "legacy" input device depends on platform data that is not > defined anywhere the plan in this series is to add support for the > keyboard and adp5589 devices as part of the MFD driver. Once the MFD > driver supports all that's supported in the Input one, we drop it... > > For DT Maintainers: > > The compatible for adp5589 is part of trivial devices. To me, it makes > sense to remove it in the patch where we drop the driver but doing so > would result in a warning when adding the same compatible for the MFD > bindings. Hence, I remove it in that patch. Is that ok? > > Uwe: > > In my eval board, I could see that reading the GPIO value (when > configured as input) does not work when OSC_EN is not set. Therefore, > commit ("pwm: adp5585: don't control OSC_EN in the pwm driver") could > very well have a Fixes tag. However I'm not 100% sure it's a real issue > or something special to my eval board. > > It would be nice if Laurent or Liu could test the PWM bits or even > check that the above is also an issue for their platform. I'll give it a try, but it will need to wait until next week. > [1]: https://lore.kernel.org/linux-input/d1395bd61ce58b3734121bca4e09605a3e997af3.camel@gmail.com/ > > BTW the series is based on linux-next/master > > --- > Changes in v2: > - Patch 5: > * Do not nest if:then:else::if:then. > - Patch 6: > * Make use of the adp5585 info variables and adp5589 volatile regs. > - Patch 9: > * Use standard "poll-interval" property (and move it before vendor > properties). > - Patch 10: > * Make sure to include bitfield.h. > > - Link to v1: https://lore.kernel.org/r/20250313-dev-adp5589-fw-v1-0-20e80d4bd4ea@analog.com > > --- > Nuno Sá (17): > dt-bindings: mfd: adp5585: ease on the required properties > mfd: adp5585: enable oscilator during probe > pwm: adp5585: don't control OSC_EN in the pwm driver > mfd: adp5585: make use of MFD_CELL_NAME() > dt-bindings: mfd: adp5585: document adp5589 I/O expander > mfd: adp5585: add support for adp5589 > gpio: adp5585: add support for the ad5589 expander > pwm: adp5585: add support for adp5589 > dt-bindings: mfd: adp5585: add properties for input events > mfd: adp5585: add support for key events > gpio: adp5585: support gpi events > Input: adp5585: Add Analog Devices ADP5585/89 support > Input: adp5589: remove the driver > mfd: adp5585: support getting vdd regulator > dt-bindings: mfd: adp5585: document reset gpio > mfd: adp5585: add support for a reset pin > pwm: adp5585: make sure to include mod_devicetable.h > > .../devicetree/bindings/mfd/adi,adp5585.yaml | 240 ++++- > .../devicetree/bindings/trivial-devices.yaml | 2 - > MAINTAINERS | 1 + > drivers/gpio/Kconfig | 1 + > drivers/gpio/gpio-adp5585.c | 299 +++++- > drivers/input/keyboard/Kconfig | 21 +- > drivers/input/keyboard/Makefile | 2 +- > drivers/input/keyboard/adp5585-keys.c | 221 ++++ > drivers/input/keyboard/adp5589-keys.c | 1066 -------------------- > drivers/mfd/adp5585.c | 808 ++++++++++++++- > drivers/pwm/pwm-adp5585.c | 57 +- > include/linux/mfd/adp5585.h | 153 ++- > 12 files changed, 1709 insertions(+), 1162 deletions(-) > --- > base-commit: 5b37f7bfff3b1582c34be8fb23968b226db71ebd > change-id: 20250311-dev-adp5589-fw-e04cfd945286 > --
The adp5585 MFD driver was introduced in 6.11 adding support for gpio and PWM. However, the gpio part of it was already supported as part of the keyboard driver: https://elixir.bootlin.com/linux/v6.14-rc6/source/drivers/input/keyboard/adp5589-keys.c#L532 On top of that it also overlapped with my refactoring of the above driver [1] to drop usage of platform data and use FW properties instead. Now, it actually makes sense for this device to be supported under MFD and since the "legacy" input device depends on platform data that is not defined anywhere the plan in this series is to add support for the keyboard and adp5589 devices as part of the MFD driver. Once the MFD driver supports all that's supported in the Input one, we drop it... For DT Maintainers: The compatible for adp5589 is part of trivial devices. To me, it makes sense to remove it in the patch where we drop the driver but doing so would result in a warning when adding the same compatible for the MFD bindings. Hence, I remove it in that patch. Is that ok? Uwe: In my eval board, I could see that reading the GPIO value (when configured as input) does not work when OSC_EN is not set. Therefore, commit ("pwm: adp5585: don't control OSC_EN in the pwm driver") could very well have a Fixes tag. However I'm not 100% sure it's a real issue or something special to my eval board. It would be nice if Laurent or Liu could test the PWM bits or even check that the above is also an issue for their platform. [1]: https://lore.kernel.org/linux-input/d1395bd61ce58b3734121bca4e09605a3e997af3.camel@gmail.com/ BTW the series is based on linux-next/master --- Changes in v2: - Patch 5: * Do not nest if:then:else::if:then. - Patch 6: * Make use of the adp5585 info variables and adp5589 volatile regs. - Patch 9: * Use standard "poll-interval" property (and move it before vendor properties). - Patch 10: * Make sure to include bitfield.h. - Link to v1: https://lore.kernel.org/r/20250313-dev-adp5589-fw-v1-0-20e80d4bd4ea@analog.com --- Nuno Sá (17): dt-bindings: mfd: adp5585: ease on the required properties mfd: adp5585: enable oscilator during probe pwm: adp5585: don't control OSC_EN in the pwm driver mfd: adp5585: make use of MFD_CELL_NAME() dt-bindings: mfd: adp5585: document adp5589 I/O expander mfd: adp5585: add support for adp5589 gpio: adp5585: add support for the ad5589 expander pwm: adp5585: add support for adp5589 dt-bindings: mfd: adp5585: add properties for input events mfd: adp5585: add support for key events gpio: adp5585: support gpi events Input: adp5585: Add Analog Devices ADP5585/89 support Input: adp5589: remove the driver mfd: adp5585: support getting vdd regulator dt-bindings: mfd: adp5585: document reset gpio mfd: adp5585: add support for a reset pin pwm: adp5585: make sure to include mod_devicetable.h .../devicetree/bindings/mfd/adi,adp5585.yaml | 240 ++++- .../devicetree/bindings/trivial-devices.yaml | 2 - MAINTAINERS | 1 + drivers/gpio/Kconfig | 1 + drivers/gpio/gpio-adp5585.c | 299 +++++- drivers/input/keyboard/Kconfig | 21 +- drivers/input/keyboard/Makefile | 2 +- drivers/input/keyboard/adp5585-keys.c | 221 ++++ drivers/input/keyboard/adp5589-keys.c | 1066 -------------------- drivers/mfd/adp5585.c | 808 ++++++++++++++- drivers/pwm/pwm-adp5585.c | 57 +- include/linux/mfd/adp5585.h | 153 ++- 12 files changed, 1709 insertions(+), 1162 deletions(-) --- base-commit: 5b37f7bfff3b1582c34be8fb23968b226db71ebd change-id: 20250311-dev-adp5589-fw-e04cfd945286 -- Thanks! - Nuno Sá