@@ -37,7 +37,6 @@
#include <linux/gpio/consumer.h>
#include <linux/input/mt.h>
#include <linux/input/touchscreen.h>
-#include <linux/input/edt-ft5x06.h>
#define MAX_SUPPORT_POINTS 5
@@ -809,21 +808,14 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
return 0;
}
-#define EDT_ATTR_CHECKSET(name, reg) \
-do { \
- if (pdata->name >= edt_ft5x06_attr_##name.limit_low && \
- pdata->name <= edt_ft5x06_attr_##name.limit_high) \
- edt_ft5x06_register_write(tsdata, reg, pdata->name); \
-} while (0)
-
#define EDT_GET_PROP(name, reg) { \
u32 val; \
if (of_property_read_u32(np, #name, &val) == 0) \
edt_ft5x06_register_write(tsdata, reg, val); \
}
-static void edt_ft5x06_ts_get_dt_defaults(struct device_node *np,
- struct edt_ft5x06_ts_data *tsdata)
+static void edt_ft5x06_ts_get_defaults(struct device_node *np,
+ struct edt_ft5x06_ts_data *tsdata)
{
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
@@ -833,23 +825,6 @@ static void edt_ft5x06_ts_get_dt_defaults(struct device_node *np,
}
static void
-edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata,
- const struct edt_ft5x06_platform_data *pdata)
-{
- struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
-
- if (!pdata->use_parameters)
- return;
-
- /* pick up defaults from the platform data */
- EDT_ATTR_CHECKSET(threshold, reg_addr->reg_threshold);
- EDT_ATTR_CHECKSET(gain, reg_addr->reg_gain);
- EDT_ATTR_CHECKSET(offset, reg_addr->reg_offset);
- if (reg_addr->reg_report_rate != NO_REGISTER)
- EDT_ATTR_CHECKSET(report_rate, reg_addr->reg_report_rate);
-}
-
-static void
edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata)
{
struct edt_reg_addr *reg_addr = &tsdata->reg_addr;
@@ -893,8 +868,6 @@ edt_ft5x06_ts_set_regs(struct edt_ft5x06_ts_data *tsdata)
static int edt_ft5x06_ts_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const struct edt_ft5x06_platform_data *pdata =
- dev_get_platdata(&client->dev);
struct edt_ft5x06_ts_data *tsdata;
struct input_dev *input;
int error;
@@ -955,12 +928,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
}
edt_ft5x06_ts_set_regs(tsdata);
-
- if (!pdata)
- edt_ft5x06_ts_get_dt_defaults(client->dev.of_node, tsdata);
- else
- edt_ft5x06_ts_get_defaults(tsdata, pdata);
-
+ edt_ft5x06_ts_get_defaults(client->dev.of_node, tsdata);
edt_ft5x06_ts_get_parameters(tsdata);
dev_dbg(&client->dev,
@@ -976,8 +944,7 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client,
input_set_abs_params(input, ABS_MT_POSITION_Y,
0, tsdata->num_y * 64 - 1, 0, 0);
- if (!pdata)
- touchscreen_parse_properties(input, true);
+ touchscreen_parse_properties(input, true);
error = input_mt_init_slots(input, MAX_SUPPORT_POINTS, INPUT_MT_DIRECT);
if (error) {
deleted file mode 100644
@@ -1,21 +0,0 @@
-#ifndef _EDT_FT5X06_H
-#define _EDT_FT5X06_H
-
-/*
- * Copyright (c) 2012 Simon Budig, <simon.budig@kernelconcepts.de>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-struct edt_ft5x06_platform_data {
- /* startup defaults for operational parameters */
- bool use_parameters;
- u8 gain;
- u8 threshold;
- u8 offset;
- u8 report_rate;
-};
-
-#endif /* _EDT_FT5X06_H */
We do not have any users of platform data in the tree and all newer platforms are either DT or ACPI, so let's drop handling of platform data. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> --- drivers/input/touchscreen/edt-ft5x06.c | 41 ++++------------------------------ include/linux/input/edt-ft5x06.h | 21 ----------------- 2 files changed, 4 insertions(+), 58 deletions(-) delete mode 100644 include/linux/input/edt-ft5x06.h