diff mbox series

[v2,06/19] dt-bindings: don't use ../dir for doc references

Message ID 0b9d9190f20282ded3a8ea2695c1e4763e76cda6.1617783062.git.mchehab+huawei@kernel.org (mailing list archive)
State New
Headers show
Series Fix broken documentation file references | expand

Commit Message

Mauro Carvalho Chehab April 7, 2021, 8:20 a.m. UTC
As documents have been renamed and moved around, their
references will break, but this will be unnoticed, as the
script which checks for it won't handle "../" references.

So, replace them by the full patch.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
---
 .../input/touchscreen/resistive-adc-touch.txt    |  2 +-
 Documentation/devicetree/bindings/mfd/da9150.txt |  8 ++++----
 .../devicetree/bindings/mfd/motorola-cpcap.txt   | 16 ++++++++--------
 3 files changed, 13 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
index 51456c0e9a27..fee0da12474e 100644
--- a/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
+++ b/Documentation/devicetree/bindings/input/touchscreen/resistive-adc-touch.txt
@@ -5,7 +5,7 @@  Required properties:
  - compatible: must be "resistive-adc-touch"
 The device must be connected to an ADC device that provides channels for
 position measurement and optional pressure.
-Refer to ../iio/iio-bindings.txt for details
+Refer to Documentation/devicetree/bindings/iio/iio-bindings.txt for details
  - iio-channels: must have at least two channels connected to an ADC device.
 These should correspond to the channels exposed by the ADC device and should
 have the right index as the ADC device registers them. These channels
diff --git a/Documentation/devicetree/bindings/mfd/da9150.txt b/Documentation/devicetree/bindings/mfd/da9150.txt
index f09b41fbdf47..763e0b639a82 100644
--- a/Documentation/devicetree/bindings/mfd/da9150.txt
+++ b/Documentation/devicetree/bindings/mfd/da9150.txt
@@ -15,13 +15,13 @@  Required properties:
 - reg: Specifies the I2C slave address
 - interrupts: IRQ line info for da9150 chip.
 - interrupt-controller: da9150 has internal IRQs (own IRQ domain).
-  (See ../interrupt-controller/interrupts.txt for
+  (See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for
    further information relating to interrupt properties)
 
 Sub-devices:
-- da9150-gpadc: See ../iio/adc/da9150-gpadc.txt
-- da9150-charger: See ../power/da9150-charger.txt
-- da9150-fg: See ../power/da9150-fg.txt
+- da9150-gpadc: See Documentation/devicetree/bindings/iio/adc/da9150-gpadc.txt
+- da9150-charger: See Documentation/devicetree/bindings/power/da9150-charger.txt
+- da9150-fg: See Documentation/devicetree/bindings/power/da9150-fg.txt
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
index 5ddcc8f4febc..ebdccfb600b9 100644
--- a/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
+++ b/Documentation/devicetree/bindings/mfd/motorola-cpcap.txt
@@ -16,14 +16,14 @@  Optional subnodes:
 The sub-functions of CPCAP get their own node with their own compatible values,
 which are described in the following files:
 
-- ../power/supply/cpcap-battery.txt
-- ../power/supply/cpcap-charger.txt
-- ../regulator/cpcap-regulator.txt
-- ../phy/phy-cpcap-usb.txt
-- ../input/cpcap-pwrbutton.txt
-- ../rtc/cpcap-rtc.txt
-- ../leds/leds-cpcap.txt
-- ../iio/adc/cpcap-adc.txt
+- Documentation/devicetree/bindings/power/supply/cpcap-battery.txt
+- Documentation/devicetree/bindings/power/supply/cpcap-charger.txt
+- Documentation/devicetree/bindings/regulator/cpcap-regulator.txt
+- Documentation/devicetree/bindings/phy/phy-cpcap-usb.txt
+- Documentation/devicetree/bindings/input/cpcap-pwrbutton.txt
+- Documentation/devicetree/bindings/rtc/cpcap-rtc.txt
+- Documentation/devicetree/bindings/leds/leds-cpcap.txt
+- Documentation/devicetree/bindings/iio/adc/cpcap-adc.txt
 
 The only exception is the audio codec. Instead of a compatible value its
 node must be named "audio-codec".