From patchwork Tue Oct 20 08:37:44 2009 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Mike Frysinger X-Patchwork-Id: 54915 Received: from vger.kernel.org (vger.kernel.org [209.132.176.167]) by demeter.kernel.org (8.14.2/8.14.2) with ESMTP id n9K8brov000503 for ; Tue, 20 Oct 2009 08:37:54 GMT Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751308AbZJTIhs (ORCPT ); Tue, 20 Oct 2009 04:37:48 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S1751096AbZJTIhs (ORCPT ); Tue, 20 Oct 2009 04:37:48 -0400 Received: from smtp.gentoo.org ([140.211.166.183]:37890 "EHLO smtp.gentoo.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751308AbZJTIho (ORCPT ); Tue, 20 Oct 2009 04:37:44 -0400 Received: from localhost.localdomain (localhost [127.0.0.1]) by smtp.gentoo.org (Postfix) with ESMTP id 9D72B67AD0; Tue, 20 Oct 2009 08:37:45 +0000 (UTC) From: Mike Frysinger To: linux-input@vger.kernel.org, Dmitry Torokhov Cc: uclinux-dist-devel@blackfin.uclinux.org, Bryan Wu , Michael Hennerich , Barry Song <21cnbao@gmail.com> Subject: [PATCH v5] input/misc: add Analog Devices AD714x captouch input driver Date: Tue, 20 Oct 2009 04:37:44 -0400 Message-Id: <1256027864-26126-1-git-send-email-vapier@gentoo.org> X-Mailer: git-send-email 1.6.5.1 In-Reply-To: <1255413730-24902-1-git-send-email-vapier@gentoo.org> References: <1255413730-24902-1-git-send-email-vapier@gentoo.org> Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 02f4f8f..fc4b0b9 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -316,4 +316,34 @@ config INPUT_PCAP To compile this driver as a module, choose M here: the module will be called pcap_keys. +config INPUT_AD714X + tristate "Analog Devices AD714x Capacitance Touch Sensor" + help + Say Y here if you want to support an AD7142/AD7147 touch sensor. + + You should select a bus connection too. + + To compile this driver as a module, choose M here: the + module will be called ad714x. + +config INPUT_AD714X_I2C + tristate "support I2C bus connection" + depends on INPUT_AD714X && I2C + default y + help + Say Y here if you have AD7142/AD7147 hooked to an I2C bus. + + To compile this driver as a module, choose M here: the + module will be called ad714x-i2c. + +config INPUT_AD714X_SPI + tristate "support SPI bus connection" + depends on INPUT_AD714X && SPI + default y + help + Say Y here if you have AD7142/AD7147 hooked to a SPI bus. + + To compile this driver as a module, choose M here: the + module will be called ad714x-spi. + endif diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index a8b8485..16db64a 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -4,6 +4,9 @@ # Each configuration option enables a list of files. +obj-$(CONFIG_INPUT_AD714X) += ad714x.o +obj-$(CONFIG_INPUT_AD714X_I2C) += ad714x-i2c.o +obj-$(CONFIG_INPUT_AD714X_SPI) += ad714x-spi.o obj-$(CONFIG_INPUT_APANEL) += apanel.o obj-$(CONFIG_INPUT_ATI_REMOTE) += ati_remote.o obj-$(CONFIG_INPUT_ATI_REMOTE2) += ati_remote2.o diff --git a/drivers/input/misc/ad714x-i2c.c b/drivers/input/misc/ad714x-i2c.c new file mode 100644 index 0000000..596c199 --- /dev/null +++ b/drivers/input/misc/ad714x-i2c.c @@ -0,0 +1,134 @@ +/* + * AD714X CapTouch Programmable Controller driver (I2C bus) + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include /* BUS_I2C */ +#include +#include +#include +#include "ad714x.h" + +#ifdef CONFIG_PM +static int ad714x_i2c_suspend(struct i2c_client *client, pm_message_t message) +{ + return ad714x_disable(i2c_get_clientdata(client)); +} + +static int ad714x_i2c_resume(struct i2c_client *client) +{ + return ad714x_enable(i2c_get_clientdata(client)); +} +#else +# define ad714x_i2c_suspend NULL +# define ad714x_i2c_resume NULL +#endif + +static int ad714x_i2c_write(struct device *dev, unsigned short reg, + unsigned short data) +{ + struct i2c_client *client = to_i2c_client(dev); + int ret = 0; + u8 *_reg = (u8 *)® + u8 *_data = (u8 *)&data; + + u8 tx[4] = { + _reg[1], + _reg[0], + _data[1], + _data[0] + }; + + ret = i2c_master_send(client, tx, 4); + if (ret < 0) + dev_err(&client->dev, "I2C write error\n"); + + return ret; +} + +static int ad714x_i2c_read(struct device *dev, unsigned short reg, + unsigned short *data) +{ + struct i2c_client *client = to_i2c_client(dev); + int ret = 0; + u8 *_reg = (u8 *)® + u8 *_data = (u8 *)data; + + u8 tx[2] = { + _reg[1], + _reg[0] + }; + u8 rx[2]; + + ret = i2c_master_send(client, tx, 2); + if (ret < 0) { + dev_err(&client->dev, "I2C read error\n"); + return ret; + } + + ret = i2c_master_recv(client, rx, 2); + if (ret < 0) { + dev_err(&client->dev, "I2C read error\n"); + return ret; + } + + _data[0] = rx[1]; + _data[1] = rx[0]; + + return ret; +} + +static int __devinit ad714x_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + int ret = 0; + struct ad714x_chip *chip = NULL; + + ret = ad714x_probe(&chip, &client->dev, BUS_I2C, client->irq, + ad714x_i2c_read, ad714x_i2c_write); + i2c_set_clientdata(client, chip); + + return ret; +} + +static int __devexit ad714x_i2c_remove(struct i2c_client *client) +{ + return ad714x_remove(i2c_get_clientdata(client)); +} + +static const struct i2c_device_id ad714x_id[] = { + { "ad7142_captouch", 0 }, + { "ad7147_captouch", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, ad714x_id); + +static struct i2c_driver ad714x_i2c_driver = { + .driver = { + .name = "ad714x_captouch", + }, + .probe = ad714x_i2c_probe, + .remove = __devexit_p(ad714x_i2c_remove), + .suspend = ad714x_i2c_suspend, + .resume = ad714x_i2c_resume, + .id_table = ad714x_id, +}; + +static __init int ad714x_i2c_init(void) +{ + return i2c_add_driver(&ad714x_i2c_driver); +} +module_init(ad714x_i2c_init); + +static __exit void ad714x_i2c_exit(void) +{ + i2c_del_driver(&ad714x_i2c_driver); +} +module_exit(ad714x_i2c_exit); + +MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor I2C Bus Driver"); +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/ad714x-spi.c b/drivers/input/misc/ad714x-spi.c new file mode 100644 index 0000000..2cea1e4 --- /dev/null +++ b/drivers/input/misc/ad714x-spi.c @@ -0,0 +1,96 @@ +/* + * AD714X CapTouch Programmable Controller driver (SPI bus) + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include /* BUS_I2C */ +#include +#include +#include +#include "ad714x.h" + +#define AD714x_SPI_CMD_PREFIX 0xE000 /* bits 15:11 */ +#define AD714x_SPI_READ BIT(10) + +#ifdef CONFIG_PM +static int ad714x_spi_suspend(struct spi_device *spi, pm_message_t message) +{ + return ad714x_disable(spi_get_drvdata(spi)); +} + +static int ad714x_spi_resume(struct spi_device *spi) +{ + return ad714x_enable(spi_get_drvdata(spi)); +} +#else +# define ad714x_spi_suspend NULL +# define ad714x_spi_resume NULL +#endif + +static int ad714x_spi_read(struct device *dev, unsigned short reg, + unsigned short *data) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned short tx = AD714x_SPI_CMD_PREFIX | AD714x_SPI_READ | reg; + + return spi_write_then_read(spi, (u8 *)&tx, 2, (u8 *)data, 2); +} + +static int ad714x_spi_write(struct device *dev, unsigned short reg, + unsigned short data) +{ + struct spi_device *spi = to_spi_device(dev); + unsigned short tx[2] = { + AD714x_SPI_CMD_PREFIX | reg, + data + }; + + return spi_write(spi, (u8 *)tx, 4); +} + +static int __devinit ad714x_spi_probe(struct spi_device *spi) +{ + int ret; + struct ad714x_chip *chip = NULL; + + ret = ad714x_probe(&chip, &spi->dev, BUS_SPI, spi->irq, + ad714x_spi_read, ad714x_spi_write); + spi_set_drvdata(spi, chip); + + return ret; +} + +static int __devexit ad714x_spi_remove(struct spi_device *spi) +{ + return ad714x_remove(spi_get_drvdata(spi)); +} + +static struct spi_driver ad714x_spi_driver = { + .driver = { + .name = "ad714x_captouch", + .owner = THIS_MODULE, + }, + .probe = ad714x_spi_probe, + .remove = __devexit_p(ad714x_spi_remove), + .suspend = ad714x_spi_suspend, + .resume = ad714x_spi_resume, +}; + +static __init int ad714x_spi_init(void) +{ + return spi_register_driver(&ad714x_spi_driver); +} +module_init(ad714x_spi_init); + +static __exit void ad714x_spi_exit(void) +{ + spi_unregister_driver(&ad714x_spi_driver); +} +module_exit(ad714x_spi_exit); + +MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor SPI Bus Driver"); +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/ad714x.c b/drivers/input/misc/ad714x.c new file mode 100644 index 0000000..d22509d --- /dev/null +++ b/drivers/input/misc/ad714x.c @@ -0,0 +1,1305 @@ +/* + * AD714X CapTouch Programmable Controller driver + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include +#include +#include +#include +#include +#include "ad714x.h" + +#define AD714X_PWR_CTRL 0x0 +#define AD714X_STG_CAL_EN_REG 0x1 +#define AD714X_AMB_COMP_CTRL0_REG 0x2 +#define AD714X_PARTID_REG 0x17 +#define AD7147_PARTID 0x1470 +#define AD7142_PARTID 0xE620 +#define AD714X_STAGECFG_REG 0x80 +#define AD714X_SYSCFG_REG 0x0 + +#define STG_LOW_INT_EN_REG 0x5 +#define STG_HIGH_INT_EN_REG 0x6 +#define STG_COM_INT_EN_REG 0x7 +#define STG_LOW_INT_STA_REG 0x8 +#define STG_HIGH_INT_STA_REG 0x9 +#define STG_COM_INT_STA_REG 0xA + +#define CDC_RESULT_S0 0xB +#define CDC_RESULT_S1 0xC +#define CDC_RESULT_S2 0xD +#define CDC_RESULT_S3 0xE +#define CDC_RESULT_S4 0xF +#define CDC_RESULT_S5 0x10 +#define CDC_RESULT_S6 0x11 +#define CDC_RESULT_S7 0x12 +#define CDC_RESULT_S8 0x13 +#define CDC_RESULT_S9 0x14 +#define CDC_RESULT_S10 0x15 +#define CDC_RESULT_S11 0x16 + +#define STAGE0_AMBIENT 0xF1 +#define STAGE1_AMBIENT 0x115 +#define STAGE2_AMBIENT 0x139 +#define STAGE3_AMBIENT 0x15D +#define STAGE4_AMBIENT 0x181 +#define STAGE5_AMBIENT 0x1A5 +#define STAGE6_AMBIENT 0x1C9 +#define STAGE7_AMBIENT 0x1ED +#define STAGE8_AMBIENT 0x211 +#define STAGE9_AMBIENT 0x234 +#define STAGE10_AMBIENT 0x259 +#define STAGE11_AMBIENT 0x27D + +#define PER_STAGE_REG_NUM 36 +#define STAGE_NUM 12 +#define STAGE_CFGREG_NUM 8 +#define SYS_CFGREG_NUM 8 + +/* + * driver information which will be used to maintain the software flow + */ +typedef enum {IDLE, JITTER, ACTIVE, SPACE} ad714x_device_state; + +struct ad714x_slider_drv { + int highest_stage; + int abs_pos; + int flt_pos; + ad714x_device_state state; + struct input_dev *input; +}; + +struct ad714x_wheel_drv { + int abs_pos; + int flt_pos; + int pre_mean_value; + int pre_highest_stage; + int pre_mean_value_no_offset; + int mean_value; + int mean_value_no_offset; + int pos_offset; + int pos_ratio; + int highest_stage; + ad714x_device_state state; + struct input_dev *input; +}; + +struct ad714x_touchpad_drv { + int x_highest_stage; + int x_flt_pos; + int x_abs_pos; + int y_highest_stage; + int y_flt_pos; + int y_abs_pos; + int left_ep; + int left_ep_val; + int right_ep; + int right_ep_val; + int top_ep; + int top_ep_val; + int bottom_ep; + int bottom_ep_val; + ad714x_device_state state; + struct input_dev *input; +}; + +struct ad714x_button_drv { + ad714x_device_state state; + /* Unlike slider/wheel/touchpad, all buttons point to + * same input_dev instance + */ + struct input_dev *input; +}; + +struct ad714x_driver_data { + struct ad714x_slider_drv *slider; + struct ad714x_wheel_drv *wheel; + struct ad714x_touchpad_drv *touchpad; + struct ad714x_button_drv *button; +}; + +/* information to integrate all things which will be private data + * of spi/i2c device + */ +struct ad714x_chip { + unsigned short h_state; + unsigned short l_state; + unsigned short c_state; + unsigned short adc_reg[STAGE_NUM]; + unsigned short amb_reg[STAGE_NUM]; + unsigned short sensor_val[STAGE_NUM]; + + struct ad714x_platform_data *hw; + struct ad714x_driver_data *sw; + + int irq; + struct device *dev; + ad714x_read_t *read; + ad714x_write_t *write; + + struct mutex mutex; + + unsigned product; + unsigned version; +}; + +static void ad714x_use_com_int(struct ad714x_chip *ad714x, int start_stage, + int end_stage) +{ + unsigned short data; + unsigned short mask; + + mask = ((1 << (end_stage + 1)) - 1) - (1 << start_stage); + + ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data); + data |= 1 << start_stage; + ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data); + + ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data); + data &= ~mask; + ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data); +} + +static void ad714x_use_thr_int(struct ad714x_chip *ad714x, int start_stage, + int end_stage) +{ + unsigned short data; + unsigned short mask; + + mask = ((1 << (end_stage + 1)) - 1) - (1 << start_stage); + + ad714x->read(ad714x->dev, STG_COM_INT_EN_REG, &data); + data &= ~(1 << start_stage); + ad714x->write(ad714x->dev, STG_COM_INT_EN_REG, data); + + ad714x->read(ad714x->dev, STG_HIGH_INT_EN_REG, &data); + data |= mask; + ad714x->write(ad714x->dev, STG_HIGH_INT_EN_REG, data); +} + +static int ad714x_cal_highest_stage(struct ad714x_chip *ad714x, int start_stage, + int end_stage) +{ + int max_res = 0; + int max_idx = 0; + int i; + + for (i = start_stage; i <= end_stage; i++) { + if (ad714x->sensor_val[i] > max_res) { + max_res = ad714x->sensor_val[i]; + max_idx = i; + } + } + + return max_idx; +} + +static int ad714x_cal_abs_pos(struct ad714x_chip *ad714x, int start_stage, + int end_stage, int highest_stage, int max_coord) +{ + int a_param, b_param; + + if (highest_stage == start_stage) { + a_param = ad714x->sensor_val[start_stage + 1]; + b_param = ad714x->sensor_val[start_stage] + + ad714x->sensor_val[start_stage + 1]; + } else if (highest_stage == end_stage) { + a_param = ad714x->sensor_val[end_stage] * + (end_stage - start_stage) + + ad714x->sensor_val[end_stage - 1] * + (end_stage - start_stage - 1); + b_param = ad714x->sensor_val[end_stage] + + ad714x->sensor_val[end_stage - 1]; + } else { + a_param = ad714x->sensor_val[highest_stage] * + (highest_stage - start_stage) + + ad714x->sensor_val[highest_stage - 1] * + (highest_stage - start_stage - 1) + + ad714x->sensor_val[highest_stage + 1] * + (highest_stage - start_stage + 1); + b_param = ad714x->sensor_val[highest_stage] + + ad714x->sensor_val[highest_stage - 1] + + ad714x->sensor_val[highest_stage + 1]; + } + + return (max_coord / (end_stage - start_stage)) * a_param / b_param; +} + + +/* One button can connect to multi positive and negative of CDCs + * Multi-buttons can connect to same positive/negative of one CDC + */ +static void ad714x_button_state_machine(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_button_plat *hw = &ad714x->hw->button[idx]; + struct ad714x_button_drv *sw = &ad714x->sw->button[idx]; + + switch (sw->state) { + case IDLE: + if (((ad714x->h_state & hw->h_mask) == hw->h_mask) && + ((ad714x->l_state & hw->l_mask) == hw->l_mask)) { + dev_dbg(ad714x->dev, "button %d touched\n", idx); + input_report_key(sw->input, hw->keycode, 1); + input_sync(sw->input); + sw->state = ACTIVE; + } + break; + case ACTIVE: + if (((ad714x->h_state & hw->h_mask) != hw->h_mask) || + ((ad714x->l_state & hw->l_mask) != hw->l_mask)) { + dev_dbg(ad714x->dev, "button %d released\n", idx); + input_report_key(sw->input, hw->keycode, 0); + input_sync(sw->input); + sw->state = IDLE; + } + break; + default: + break; + } +} + +/* The response of a sensor is defined by the absolute number of codes + * between the current CDC value and the ambient value. + */ +void ad714x_slider_cal_sensor_val(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx]; + int i; + + for (i = hw->start_stage; i <= hw->end_stage; i++) { + ad714x->read(ad714x->dev, CDC_RESULT_S0 + i, + &ad714x->adc_reg[i]); + ad714x->read(ad714x->dev, + STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, + &ad714x->amb_reg[i]); + + ad714x->sensor_val[i] = abs(ad714x->adc_reg[i] - + ad714x->amb_reg[i]); + } +} + +void ad714x_slider_cal_highest_stage(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx]; + struct ad714x_slider_drv *sw = &ad714x->sw->slider[idx]; + + sw->highest_stage = ad714x_cal_highest_stage(ad714x, hw->start_stage, + hw->end_stage); + + dev_dbg(ad714x->dev, "slider %d highest_stage:%d\n", idx, + sw->highest_stage); +} + +/* The formulae are very straight forward. It uses the sensor with the + * highest response and the 2 adjacent ones. + * When Sensor 0 has the highest response, only sensor 0 and sensor 1 + * are used in the calculations. Similarly when the last sensor has the + * highest response, only the last sensor and the second last sensors + * are used in the calculations. + * + * For i= idx_of_peak_Sensor-1 to i= idx_of_peak_Sensor+1 + * v += Sensor response(i)*i + * w += Sensor response(i) + * POS=(Number_of_Positions_Wanted/(Number_of_Sensors_Used-1)) *(v/w) + */ +void ad714x_slider_cal_abs_pos(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx]; + struct ad714x_slider_drv *sw = &ad714x->sw->slider[idx]; + + sw->abs_pos = ad714x_cal_abs_pos(ad714x, hw->start_stage, hw->end_stage, + sw->highest_stage, hw->max_coord); + + dev_dbg(ad714x->dev, "slider %d absolute position:%d\n", idx, + sw->abs_pos); +} + +/* + * To minimise the Impact of the noise on the algorithm, ADI developed a + * routine that filters the CDC results after they have been read by the + * host processor. + * The filter used is an Infinite Input Response(IIR) filter implemented + * in firmware and attenuates the noise on the CDC results after they've + * been read by the host processor. + * Filtered_CDC_result = (Filtered_CDC_result * (10 - Coefficient) + + * Latest_CDC_result * Coefficient)/10 + */ +void ad714x_slider_cal_flt_pos(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_slider_drv *sw = &ad714x->sw->slider[idx]; + + sw->flt_pos = (sw->flt_pos * (10 - 4) + + sw->abs_pos * 4)/10; + + dev_dbg(ad714x->dev, "slider %d filter position:%d\n", idx, + sw->flt_pos); +} + +static void ad714x_slider_use_com_int(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx]; + ad714x_use_com_int(ad714x, hw->start_stage, hw->end_stage); +} + +static void ad714x_slider_use_thr_int(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx]; + ad714x_use_thr_int(ad714x, hw->start_stage, hw->end_stage); +} + +static void ad714x_slider_state_machine(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_slider_plat *hw = &ad714x->hw->slider[idx]; + struct ad714x_slider_drv *sw = &ad714x->sw->slider[idx]; + unsigned short h_state, c_state; + unsigned short mask; + + mask = ((1 << (hw->end_stage + 1)) - 1) - ((1 << hw->start_stage) - 1); + + h_state = ad714x->h_state & mask; + c_state = ad714x->c_state & mask; + + switch (sw->state) { + case IDLE: + if (h_state) { + sw->state = JITTER; + /* In End of Conversion interrupt mode, the AD714X + * continuously generates hardware interrupts. + */ + ad714x_slider_use_com_int(ad714x, idx); + dev_dbg(ad714x->dev, "slider %d touched\n", idx); + } + break; + case JITTER: + if (c_state == mask) { + ad714x_slider_cal_sensor_val(ad714x, idx); + ad714x_slider_cal_highest_stage(ad714x, idx); + ad714x_slider_cal_abs_pos(ad714x, idx); + sw->flt_pos = sw->abs_pos; + sw->state = ACTIVE; + } + break; + case ACTIVE: + if (c_state == mask) { + if (h_state) { + ad714x_slider_cal_sensor_val(ad714x, idx); + ad714x_slider_cal_highest_stage(ad714x, idx); + ad714x_slider_cal_abs_pos(ad714x, idx); + ad714x_slider_cal_flt_pos(ad714x, idx); + + input_report_abs(sw->input, ABS_X, sw->flt_pos); + input_report_key(sw->input, BTN_TOUCH, 1); + } else { + /* When the user lifts off the sensor, configure + * the AD714X back to threshold interrupt mode. + */ + ad714x_slider_use_thr_int(ad714x, idx); + sw->state = IDLE; + input_report_key(sw->input, BTN_TOUCH, 0); + dev_dbg(ad714x->dev, "slider %d released\n", + idx); + } + input_sync(sw->input); + } + break; + default: + break; + } +} + +/* When the scroll wheel is activated, we compute the absolute position based + * on the sensor values. To calculate the position, we first determine the + * sensor that has the greatest response among the 8 sensors that constitutes + * the scrollwheel. Then we determined the 2 sensors on either sides of the + * sensor with the highest response and we apply weights to these sensors. + */ +static void ad714x_wheel_cal_highest_stage(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx]; + struct ad714x_wheel_drv *sw = &ad714x->sw->wheel[idx]; + + sw->pre_highest_stage = sw->highest_stage; + sw->highest_stage = ad714x_cal_highest_stage(ad714x, hw->start_stage, + hw->end_stage); + + dev_dbg(ad714x->dev, "wheel %d highest_stage:%d\n", idx, + sw->highest_stage); +} + +static void ad714x_wheel_cal_sensor_val(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx]; + int i; + + for (i = hw->start_stage; i <= hw->end_stage; i++) { + ad714x->read(ad714x->dev, CDC_RESULT_S0 + i, + &ad714x->adc_reg[i]); + ad714x->read(ad714x->dev, + STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, + &ad714x->amb_reg[i]); + if (ad714x->adc_reg[i] > ad714x->amb_reg[i]) + ad714x->sensor_val[i] = ad714x->adc_reg[i] - + ad714x->amb_reg[i]; + else + ad714x->sensor_val[i] = 0; + } +} + +/* When the scroll wheel is activated, we compute the absolute position based + * on the sensor values. To calculate the position, we first determine the + * sensor that has the greatest response among the 8 sensors that constitutes + * the scrollwheel. Then we determined the 2 sensors on either sides of the + * sensor with the highest response and we apply weights to these sensors. The + * result of this computation gives us the mean value which defined by the + * following formula: + * For i= second_before_highest_stage to i= second_after_highest_stage + * v += Sensor response(i)*WEIGHT*(i+3) + * w += Sensor response(i) + * Mean_Value=v/w + * pos_on_scrollwheel = (Mean_Value - position_offset) / position_ratio + * + */ + +#define WEIGHT_FACTOR 30 +/* This constant prevents the "PositionOffset" from reaching a big value */ +#define OFFSET_POSITION_CLAMP 120 +static void ad714x_wheel_cal_abs_pos(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx]; + struct ad714x_wheel_drv *sw = &ad714x->sw->wheel[idx]; + int stage_num = hw->end_stage - hw->start_stage + 1; + int second_before, first_before, highest, first_after, second_after; + int a_param, b_param; + + /* Calculate Mean value */ + + second_before = (sw->highest_stage + stage_num - 2) % stage_num; + first_before = (sw->highest_stage + stage_num - 1) % stage_num; + highest = sw->highest_stage; + first_after = (sw->highest_stage + stage_num + 1) % stage_num; + second_after = (sw->highest_stage + stage_num + 2) % stage_num; + + if (((sw->highest_stage - hw->start_stage) > 1) && + ((hw->end_stage - sw->highest_stage) > 1)) { + a_param = ad714x->sensor_val[second_before] * + (second_before - hw->start_stage + 3) + + ad714x->sensor_val[first_before] * + (second_before - hw->start_stage + 3) + + ad714x->sensor_val[highest] * + (second_before - hw->start_stage + 3) + + ad714x->sensor_val[first_after] * + (first_after - hw->start_stage + 3) + + ad714x->sensor_val[second_after] * + (second_after - hw->start_stage + 3); + } else { + a_param = ad714x->sensor_val[second_before] * + (second_before - hw->start_stage + 1) + + ad714x->sensor_val[first_before] * + (second_before - hw->start_stage + 2) + + ad714x->sensor_val[highest] * + (second_before - hw->start_stage + 3) + + ad714x->sensor_val[first_after] * + (first_after - hw->start_stage + 4) + + ad714x->sensor_val[second_after] * + (second_after - hw->start_stage + 5); + } + a_param *= WEIGHT_FACTOR; + + b_param = ad714x->sensor_val[second_before] + + ad714x->sensor_val[first_before] + + ad714x->sensor_val[highest] + + ad714x->sensor_val[first_after] + + ad714x->sensor_val[second_after]; + + sw->pre_mean_value = sw->mean_value; + sw->mean_value = a_param / b_param; + + /* Calculate the offset */ + + if ((sw->pre_highest_stage == hw->end_stage) && + (sw->highest_stage == hw->start_stage)) + sw->pos_offset = sw->mean_value; + else if ((sw->pre_highest_stage == hw->start_stage) && + (sw->highest_stage == hw->end_stage)) + sw->pos_offset = sw->pre_mean_value; + if (sw->pos_offset > OFFSET_POSITION_CLAMP) + sw->pos_offset = OFFSET_POSITION_CLAMP; + + /* Calculate the mean value without the offset */ + + sw->pre_mean_value_no_offset = sw->mean_value_no_offset; + sw->mean_value_no_offset = sw->mean_value - sw->pos_offset; + if (sw->mean_value_no_offset < 0) + sw->mean_value_no_offset = 0; + + /* Calculate ratio to scale down to NUMBER_OF_WANTED_POSITIONS */ + + if ((sw->pre_highest_stage == hw->end_stage) && + (sw->highest_stage == hw->start_stage)) + sw->pos_ratio = (sw->pre_mean_value_no_offset * 100) / + hw->max_coord; + else if ((sw->pre_highest_stage == hw->start_stage) && + (sw->highest_stage == hw->end_stage)) + sw->pos_ratio = (sw->mean_value_no_offset * 100) / + hw->max_coord; + sw->abs_pos = (sw->mean_value_no_offset * 100) / sw->pos_ratio; + if (sw->abs_pos > hw->max_coord) + sw->abs_pos = hw->max_coord; +} + +static void ad714x_wheel_cal_flt_pos(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx]; + struct ad714x_wheel_drv *sw = &ad714x->sw->wheel[idx]; + if (((sw->pre_highest_stage == hw->end_stage) && + (sw->highest_stage == hw->start_stage)) || + ((sw->pre_highest_stage == hw->start_stage) && + (sw->highest_stage == hw->end_stage))) + sw->flt_pos = sw->abs_pos; + else + sw->flt_pos = ((sw->flt_pos * 30) + (sw->abs_pos * 71)) / 100; + + if (sw->flt_pos > hw->max_coord) + sw->flt_pos = hw->max_coord; +} + +static void ad714x_wheel_use_com_int(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx]; + ad714x_use_com_int(ad714x, hw->start_stage, hw->end_stage); +} + +static void ad714x_wheel_use_thr_int(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx]; + ad714x_use_thr_int(ad714x, hw->start_stage, hw->end_stage); +} + +static void ad714x_wheel_state_machine(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_wheel_plat *hw = &ad714x->hw->wheel[idx]; + struct ad714x_wheel_drv *sw = &ad714x->sw->wheel[idx]; + unsigned short h_state, c_state; + unsigned short mask; + + mask = ((1 << (hw->end_stage + 1)) - 1) - ((1 << hw->start_stage) - 1); + + h_state = ad714x->h_state & mask; + c_state = ad714x->c_state & mask; + + switch (sw->state) { + case IDLE: + if (h_state) { + sw->state = JITTER; + /* In End of Conversion interrupt mode, the AD714X + * continuously generates hardware interrupts. + */ + ad714x_wheel_use_com_int(ad714x, idx); + dev_dbg(ad714x->dev, "wheel %d touched\n", idx); + } + break; + case JITTER: + if (c_state == mask) { + ad714x_wheel_cal_sensor_val(ad714x, idx); + ad714x_wheel_cal_highest_stage(ad714x, idx); + ad714x_wheel_cal_abs_pos(ad714x, idx); + sw->flt_pos = sw->abs_pos; + sw->state = ACTIVE; + } + break; + case ACTIVE: + if (c_state == mask) { + if (h_state) { + ad714x_wheel_cal_sensor_val(ad714x, idx); + ad714x_wheel_cal_highest_stage(ad714x, idx); + ad714x_wheel_cal_abs_pos(ad714x, idx); + ad714x_wheel_cal_flt_pos(ad714x, idx); + + input_report_abs(sw->input, ABS_WHEEL, + sw->abs_pos); + input_report_key(sw->input, BTN_TOUCH, 1); + } else { + /* When the user lifts off the sensor, configure + * the AD714X back to threshold interrupt mode. + */ + ad714x_wheel_use_thr_int(ad714x, idx); + sw->state = IDLE; + input_report_key(sw->input, BTN_TOUCH, 0); + + dev_dbg(ad714x->dev, "wheel %d released\n", + idx); + } + input_sync(sw->input); + } + break; + default: + break; + } +} + +static void touchpad_cal_sensor_val(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; + int i; + + for (i = hw->x_start_stage; i <= hw->x_end_stage; i++) { + ad714x->read(ad714x->dev, CDC_RESULT_S0 + i, + &ad714x->adc_reg[i]); + ad714x->read(ad714x->dev, + STAGE0_AMBIENT + i * PER_STAGE_REG_NUM, + &ad714x->amb_reg[i]); + if (ad714x->adc_reg[i] > ad714x->amb_reg[i]) + ad714x->sensor_val[i] = ad714x->adc_reg[i] - + ad714x->amb_reg[i]; + else + ad714x->sensor_val[i] = 0; + } +} + +static void touchpad_cal_highest_stage(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; + struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx]; + + sw->x_highest_stage = ad714x_cal_highest_stage(ad714x, + hw->x_start_stage, hw->x_end_stage); + sw->y_highest_stage = ad714x_cal_highest_stage(ad714x, + hw->y_start_stage, hw->y_end_stage); + + dev_dbg(ad714x->dev, + "touchpad %d x_highest_stage:%d, y_highest_stage:%d\n", + idx, sw->x_highest_stage, sw->y_highest_stage); +} + +/* If 2 fingers are touching the sensor then 2 peaks can be observed in the + * distribution. + * The arithmetic doesn't support to get absolute coordinates for multi-touch + * yet. + */ +static int touchpad_check_second_peak(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; + struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx]; + int i; + + for (i = hw->x_start_stage; i < sw->x_highest_stage; i++) { + if ((ad714x->sensor_val[i] - ad714x->sensor_val[i + 1]) + > (ad714x->sensor_val[i + 1] / 10)) + return 1; + } + + for (i = sw->x_highest_stage; i < hw->x_end_stage; i++) { + if ((ad714x->sensor_val[i + 1] - ad714x->sensor_val[i]) + > (ad714x->sensor_val[i] / 10)) + return 1; + } + + for (i = hw->y_start_stage; i < sw->y_highest_stage; i++) { + if ((ad714x->sensor_val[i] - ad714x->sensor_val[i + 1]) + > (ad714x->sensor_val[i + 1] / 10)) + return 1; + } + + for (i = sw->y_highest_stage; i < hw->y_end_stage; i++) { + if ((ad714x->sensor_val[i + 1] - ad714x->sensor_val[i]) + > (ad714x->sensor_val[i] / 10)) + return 1; + } + + return 0; +} + +/* If only one finger is used to activate the touch pad then only 1 peak will be + * registered in the distribution. This peak and the 2 adjacent sensors will be + * used in the calculation of the absolute position. This will prevent hand + * shadows to affect the absolute position calculation. + */ +static void touchpad_cal_abs_pos(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; + struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx]; + + sw->x_abs_pos = ad714x_cal_abs_pos(ad714x, hw->x_start_stage, + hw->x_end_stage, sw->x_highest_stage, hw->x_max_coord); + sw->y_abs_pos = ad714x_cal_abs_pos(ad714x, hw->y_start_stage, + hw->y_end_stage, sw->y_highest_stage, hw->y_max_coord); + + dev_dbg(ad714x->dev, "touchpad %d absolute position:(%d, %d)\n", idx, + sw->x_abs_pos, sw->y_abs_pos); +} + +static void touchpad_cal_flt_pos(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx]; + + sw->x_flt_pos = (sw->x_flt_pos * (10 - 4) + + sw->x_abs_pos * 4)/10; + sw->y_flt_pos = (sw->y_flt_pos * (10 - 4) + + sw->y_abs_pos * 4)/10; + + dev_dbg(ad714x->dev, "touchpad %d filter position:(%d, %d)\n", + idx, sw->x_flt_pos, sw->y_flt_pos); +} + +/* To prevent distortion from showing in the absolute position, it is + * necessary to detect the end points. When endpoints are detected, the + * driver stops updating the status variables with absolute positions. + * End points are detected on the 4 edges of the touchpad sensor. The + * method to detect them is the same for all 4. + * To detect the end points, the firmware computes the difference in + * percent between the sensor on the edge and the adjacent one. The + * difference is calculated in percent in order to make the end point + * detection independent of the pressure. + */ + +#define LEFT_END_POINT_DETECTION_LEVEL 550 +#define RIGHT_END_POINT_DETECTION_LEVEL 750 +#define LEFT_RIGHT_END_POINT_DEAVTIVALION_LEVEL 850 +#define TOP_END_POINT_DETECTION_LEVEL 550 +#define BOTTOM_END_POINT_DETECTION_LEVEL 950 +#define TOP_BOTTOM_END_POINT_DEAVTIVALION_LEVEL 700 +static int touchpad_check_endpoint(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; + struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx]; + int percent_sensor_diff; + + /* left endpoint detect */ + percent_sensor_diff = (ad714x->sensor_val[hw->x_start_stage] - + ad714x->sensor_val[hw->x_start_stage + 1]) * 100 / + ad714x->sensor_val[hw->x_start_stage + 1]; + if (!sw->left_ep) { + if (percent_sensor_diff >= LEFT_END_POINT_DETECTION_LEVEL) { + sw->left_ep = 1; + sw->left_ep_val = + ad714x->sensor_val[hw->x_start_stage + 1]; + } + } else { + if ((percent_sensor_diff < LEFT_END_POINT_DETECTION_LEVEL) && + (ad714x->sensor_val[hw->x_start_stage + 1] > + LEFT_RIGHT_END_POINT_DEAVTIVALION_LEVEL + sw->left_ep_val)) + sw->left_ep = 0; + } + + /* right endpoint detect */ + percent_sensor_diff = (ad714x->sensor_val[hw->x_end_stage] - + ad714x->sensor_val[hw->x_end_stage - 1]) * 100 / + ad714x->sensor_val[hw->x_end_stage - 1]; + if (!sw->right_ep) { + if (percent_sensor_diff >= RIGHT_END_POINT_DETECTION_LEVEL) { + sw->right_ep = 1; + sw->right_ep_val = + ad714x->sensor_val[hw->x_end_stage - 1]; + } + } else { + if ((percent_sensor_diff < RIGHT_END_POINT_DETECTION_LEVEL) && + (ad714x->sensor_val[hw->x_end_stage - 1] > + LEFT_RIGHT_END_POINT_DEAVTIVALION_LEVEL + sw->right_ep_val)) + sw->right_ep = 0; + } + + /* top endpoint detect */ + percent_sensor_diff = (ad714x->sensor_val[hw->y_start_stage] - + ad714x->sensor_val[hw->y_start_stage + 1]) * 100 / + ad714x->sensor_val[hw->y_start_stage + 1]; + if (!sw->top_ep) { + if (percent_sensor_diff >= TOP_END_POINT_DETECTION_LEVEL) { + sw->top_ep = 1; + sw->top_ep_val = + ad714x->sensor_val[hw->y_start_stage + 1]; + } + } else { + if ((percent_sensor_diff < TOP_END_POINT_DETECTION_LEVEL) && + (ad714x->sensor_val[hw->y_start_stage + 1] > + TOP_BOTTOM_END_POINT_DEAVTIVALION_LEVEL + sw->top_ep_val)) + sw->top_ep = 0; + } + + /* bottom endpoint detect */ + percent_sensor_diff = (ad714x->sensor_val[hw->y_end_stage] - + ad714x->sensor_val[hw->y_end_stage - 1]) * 100 / + ad714x->sensor_val[hw->y_end_stage - 1]; + if (!sw->bottom_ep) { + if (percent_sensor_diff >= BOTTOM_END_POINT_DETECTION_LEVEL) { + sw->bottom_ep = 1; + sw->bottom_ep_val = + ad714x->sensor_val[hw->y_end_stage - 1]; + } + } else { + if ((percent_sensor_diff < BOTTOM_END_POINT_DETECTION_LEVEL) && + (ad714x->sensor_val[hw->y_end_stage - 1] > + TOP_BOTTOM_END_POINT_DEAVTIVALION_LEVEL + sw->bottom_ep_val)) + sw->bottom_ep = 0; + } + + return sw->left_ep || sw->right_ep || sw->top_ep || sw->bottom_ep; +} + +static void touchpad_use_com_int(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; + ad714x_use_com_int(ad714x, hw->x_start_stage, hw->x_end_stage); +} + +static void touchpad_use_thr_int(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; + ad714x_use_thr_int(ad714x, hw->x_start_stage, hw->x_end_stage); + ad714x_use_thr_int(ad714x, hw->y_start_stage, hw->y_end_stage); +} + +static void ad714x_touchpad_state_machine(struct ad714x_chip *ad714x, int idx) +{ + struct ad714x_touchpad_plat *hw = &ad714x->hw->touchpad[idx]; + struct ad714x_touchpad_drv *sw = &ad714x->sw->touchpad[idx]; + unsigned short h_state, c_state; + unsigned short mask; + + mask = (((1 << (hw->x_end_stage + 1)) - 1) - + ((1 << hw->x_start_stage) - 1)) + + (((1 << (hw->y_end_stage + 1)) - 1) - + ((1 << hw->y_start_stage) - 1)); + + h_state = ad714x->h_state & mask; + c_state = ad714x->c_state & mask; + + switch (sw->state) { + case IDLE: + if (h_state) { + sw->state = JITTER; + /* In End of Conversion interrupt mode, the AD714X + * continuously generates hardware interrupts. + */ + touchpad_use_com_int(ad714x, idx); + dev_dbg(ad714x->dev, "touchpad %d touched\n", idx); + } + break; + case JITTER: + if (c_state == mask) { + touchpad_cal_sensor_val(ad714x, idx); + touchpad_cal_highest_stage(ad714x, idx); + if ((!touchpad_check_second_peak(ad714x, idx)) && + (!touchpad_check_endpoint(ad714x, idx))) { + dev_dbg(ad714x->dev, + "touchpad%d, 2 fingers or endpoint\n", + idx); + touchpad_cal_abs_pos(ad714x, idx); + sw->x_flt_pos = sw->x_abs_pos; + sw->y_flt_pos = sw->y_abs_pos; + sw->state = ACTIVE; + } + } + break; + case ACTIVE: + if (c_state == mask) { + if (h_state) { + touchpad_cal_sensor_val(ad714x, idx); + touchpad_cal_highest_stage(ad714x, idx); + if ((!touchpad_check_second_peak(ad714x, idx)) + && (!touchpad_check_endpoint(ad714x, idx))) { + touchpad_cal_abs_pos(ad714x, idx); + touchpad_cal_flt_pos(ad714x, idx); + input_report_abs(sw->input, ABS_X, + sw->x_flt_pos); + input_report_abs(sw->input, ABS_Y, + sw->y_flt_pos); + input_report_key(sw->input, BTN_TOUCH, + 1); + } + } else { + /* When the user lifts off the sensor, configure + * the AD714X back to threshold interrupt mode. + */ + touchpad_use_thr_int(ad714x, idx); + sw->state = IDLE; + input_report_key(sw->input, BTN_TOUCH, 0); + dev_dbg(ad714x->dev, "touchpad %d released\n", + idx); + } + input_sync(sw->input); + } + break; + default: + break; + } +} + +static int ad714x_hw_detect(struct ad714x_chip *ad714x) +{ + unsigned short data; + + ad714x->read(ad714x->dev, AD714X_PARTID_REG, &data); + switch (data & 0xFFF0) { + case AD7147_PARTID: + ad714x->product = 0x7147; + ad714x->version = data & 0xF; + dev_info(ad714x->dev, "found AD7147 captouch, rev:%d\n", + ad714x->version); + return 0; + case AD7142_PARTID: + ad714x->product = 0x7142; + ad714x->version = data & 0xF; + dev_info(ad714x->dev, "found AD7142 captouch, rev:%d\n", + ad714x->version); + return 0; + default: + dev_err(ad714x->dev, + "fail to detect AD714X captouch, read ID is %04x\n", + data); + return -ENODEV; + } +} + +static void ad714x_hw_init(struct ad714x_chip *ad714x) +{ + int i, j; + unsigned short reg_base; + unsigned short data; + + /* configuration CDC and interrupts*/ + + for (i = 0; i < STAGE_NUM; i++) { + reg_base = AD714X_STAGECFG_REG + i * STAGE_CFGREG_NUM; + for (j = 0; j < STAGE_CFGREG_NUM; j++) + ad714x->write(ad714x->dev, reg_base + j, + ad714x->hw->stage_cfg_reg[i][j]); + } + + for (i = 0; i < SYS_CFGREG_NUM; i++) + ad714x->write(ad714x->dev, AD714X_SYSCFG_REG + i, + ad714x->hw->sys_cfg_reg[i]); + for (i = 0; i < SYS_CFGREG_NUM; i++) + ad714x->read(ad714x->dev, AD714X_SYSCFG_REG + i, + &data); + + ad714x->write(ad714x->dev, AD714X_STG_CAL_EN_REG, 0xFFF); + + /* clear all interrupts */ + ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data); + ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data); + ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data); +} + +static irqreturn_t ad714x_interrupt_thread(int irq, void *data) +{ + struct ad714x_chip *ad714x = data; + int i; + + mutex_lock(&ad714x->mutex); + + ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &ad714x->l_state); + ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &ad714x->h_state); + ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &ad714x->c_state); + + for (i = 0; i < ad714x->hw->button_num; i++) + ad714x_button_state_machine(ad714x, i); + for (i = 0; i < ad714x->hw->slider_num; i++) + ad714x_slider_state_machine(ad714x, i); + for (i = 0; i < ad714x->hw->wheel_num; i++) + ad714x_wheel_state_machine(ad714x, i); + for (i = 0; i < ad714x->hw->touchpad_num; i++) + ad714x_touchpad_state_machine(ad714x, i); + + mutex_unlock(&ad714x->mutex); + + return IRQ_HANDLED; +} + +static irqreturn_t ad714x_interrupt(int irq, void *data) +{ + return IRQ_WAKE_THREAD; +} + +#define MAX_DEVICE_NUM 8 +int ad714x_probe(struct ad714x_chip **pad714x, struct device *dev, + u16 bus_type, int irq, ad714x_read_t read, ad714x_write_t write) +{ + int ret, i, alloc_idx; + struct input_dev *input[MAX_DEVICE_NUM]; + + struct ad714x_platform_data *plat_data; + struct ad714x_chip *ad714x; + void *drv_mem; + + struct ad714x_button_drv *bt_drv; + struct ad714x_slider_drv *sd_drv; + struct ad714x_wheel_drv *wl_drv; + struct ad714x_touchpad_drv *tp_drv; + + plat_data = dev->platform_data; + if (dev->platform_data == NULL) { + dev_err(dev, "platform data for ad714x doesn't exist\n"); + return -ENODEV; + } + + *pad714x = ad714x = kzalloc(sizeof(*ad714x) + sizeof(*ad714x->sw) + + sizeof(*sd_drv) * plat_data->slider_num + + sizeof(*wl_drv) * plat_data->wheel_num + + sizeof(*tp_drv) * plat_data->touchpad_num + + sizeof(*bt_drv) * plat_data->button_num, GFP_KERNEL); + if (!ad714x) + return -ENOMEM; + ad714x->hw = plat_data; + + drv_mem = ad714x + 1; + ad714x->sw = drv_mem; + drv_mem += sizeof(*ad714x->sw); + ad714x->sw->slider = sd_drv = drv_mem; + drv_mem += sizeof(*sd_drv) * ad714x->hw->slider_num; + ad714x->sw->wheel = wl_drv = drv_mem; + drv_mem += sizeof(*wl_drv) * ad714x->hw->wheel_num; + ad714x->sw->touchpad = tp_drv = drv_mem; + drv_mem += sizeof(*tp_drv) * ad714x->hw->touchpad_num; + ad714x->sw->button = bt_drv = drv_mem; + drv_mem += sizeof(*bt_drv) * ad714x->hw->button_num; + + ad714x->read = read; + ad714x->write = write; + ad714x->irq = irq; + ad714x->dev = dev; + + ret = ad714x_hw_detect(ad714x); + if (ret) + goto det_err; + + /* initilize and request sw/hw resources */ + + ad714x_hw_init(ad714x); + mutex_init(&ad714x->mutex); + + if (ad714x->irq > 0) { + ret = request_threaded_irq(ad714x->irq, ad714x_interrupt, + ad714x_interrupt_thread, IRQF_TRIGGER_FALLING, + "ad714x_captouch", ad714x); + if (ret) { + dev_err(dev, "can't allocate irq %d\n", + ad714x->irq); + goto fail_irq; + } + } else { + dev_err(dev, "IRQ not configured!\n"); + ret = -EINVAL; + goto det_err; + } + + /* + * Allocate and register AD714X input device + */ + alloc_idx = 0; + + /* a slider uses one input_dev instance */ + if (ad714x->hw->slider_num > 0) { + struct ad714x_slider_plat *sd_plat = ad714x->hw->slider; + + for (i = 0; i < ad714x->hw->slider_num; i++) { + sd_drv[i].input = input[alloc_idx] = input_allocate_device(); + if (!input[alloc_idx]) { + ret = -ENOMEM; + goto fail_alloc_reg; + } + + __set_bit(EV_ABS, input[alloc_idx]->evbit); + __set_bit(EV_KEY, input[alloc_idx]->evbit); + __set_bit(ABS_X, input[alloc_idx]->absbit); + __set_bit(BTN_TOUCH, input[alloc_idx]->keybit); + input_set_abs_params(input[alloc_idx], ABS_X, 0, + sd_plat->max_coord, 0, 0); + + input[alloc_idx]->id.bustype = bus_type; + input[alloc_idx]->id.product = ad714x->product; + input[alloc_idx]->id.version = ad714x->version; + + ret = input_register_device(input[alloc_idx]); + if (ret) + goto fail_alloc_reg; + + alloc_idx++; + } + } + + /* a wheel uses one input_dev instance */ + if (ad714x->hw->wheel_num > 0) { + struct ad714x_wheel_plat *wl_plat = ad714x->hw->wheel; + + for (i = 0; i < ad714x->hw->wheel_num; i++) { + wl_drv[i].input = input[alloc_idx] = input_allocate_device(); + if (!input[alloc_idx]) { + ret = -ENOMEM; + goto fail_alloc_reg; + } + + __set_bit(EV_KEY, input[alloc_idx]->evbit); + __set_bit(EV_ABS, input[alloc_idx]->evbit); + __set_bit(ABS_WHEEL, input[alloc_idx]->absbit); + __set_bit(BTN_TOUCH, input[alloc_idx]->keybit); + input_set_abs_params(input[alloc_idx], ABS_WHEEL, 0, + wl_plat->max_coord, 0, 0); + + input[alloc_idx]->id.bustype = bus_type; + input[alloc_idx]->id.product = ad714x->product; + input[alloc_idx]->id.version = ad714x->version; + + ret = input_register_device(input[alloc_idx]); + if (ret) + goto fail_alloc_reg; + + alloc_idx++; + } + } + + /* a touchpad uses one input_dev instance */ + if (ad714x->hw->touchpad_num > 0) { + struct ad714x_touchpad_plat *tp_plat = ad714x->hw->touchpad; + + for (i = 0; i < ad714x->hw->touchpad_num; i++) { + tp_drv[i].input = input[alloc_idx] = input_allocate_device(); + if (!input[alloc_idx]) { + ret = -ENOMEM; + goto fail_alloc_reg; + } + + __set_bit(EV_ABS, input[alloc_idx]->evbit); + __set_bit(EV_KEY, input[alloc_idx]->evbit); + __set_bit(ABS_X, input[alloc_idx]->absbit); + __set_bit(ABS_Y, input[alloc_idx]->absbit); + __set_bit(BTN_TOUCH, input[alloc_idx]->keybit); + input_set_abs_params(input[alloc_idx], ABS_X, 0, + tp_plat->x_max_coord, 0, 0); + input_set_abs_params(input[alloc_idx], ABS_Y, 0, + tp_plat->y_max_coord, 0, 0); + + input[alloc_idx]->id.bustype = bus_type; + input[alloc_idx]->id.product = ad714x->product; + input[alloc_idx]->id.version = ad714x->version; + + ret = input_register_device(input[alloc_idx]); + if (ret) + goto fail_alloc_reg; + + alloc_idx++; + } + } + + /* all buttons use one input node */ + if (ad714x->hw->button_num > 0) { + struct ad714x_button_plat *bt_plat = ad714x->hw->button; + + input[alloc_idx] = input_allocate_device(); + if (!input[alloc_idx]) { + ret = -ENOMEM; + goto fail_alloc_reg; + } + + __set_bit(EV_KEY, input[alloc_idx]->evbit); + for (i = 0; i < ad714x->hw->button_num; i++) { + bt_drv[i].input = input[alloc_idx]; + __set_bit(bt_plat[i].keycode, input[alloc_idx]->keybit); + } + + input[alloc_idx]->id.bustype = bus_type; + input[alloc_idx]->id.product = ad714x->product; + input[alloc_idx]->id.version = ad714x->version; + + ret = input_register_device(input[alloc_idx]); + if (ret) + goto fail_alloc_reg; + + alloc_idx++; + } + + + return 0; + + fail_alloc_reg: + dev_err(dev, "failed to setup AD714x input device %i\n", alloc_idx); + for (i = 0; i < alloc_idx - 1; i++) + input_unregister_device(input[i]); + input_free_device(input[alloc_idx]); + + free_irq(ad714x->irq, ad714x); + fail_irq: + det_err: + kfree(ad714x); + return ret; +} +EXPORT_SYMBOL(ad714x_probe); + +int ad714x_remove(struct ad714x_chip *ad714x) +{ + int i; + + /* unregister and free all input devices */ + + for (i = 0; i < ad714x->hw->slider_num; i++) + input_unregister_device(ad714x->sw->slider[i].input); + + for (i = 0; i < ad714x->hw->wheel_num; i++) + input_unregister_device(ad714x->sw->wheel[i].input); + + for (i = 0; i < ad714x->hw->touchpad_num; i++) + input_unregister_device(ad714x->sw->touchpad[i].input); + + if (ad714x->hw->button_num) + input_unregister_device(ad714x->sw->button[0].input); + + free_irq(ad714x->irq, ad714x); + + kfree(ad714x); + + return 0; +} +EXPORT_SYMBOL(ad714x_remove); + +#ifdef CONFIG_PM +int ad714x_disable(struct ad714x_chip *ad714x) +{ + unsigned short data; + + dev_dbg(ad714x->dev, "%s enter\n", __func__); + + mutex_lock(&ad714x->mutex); + + data = ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL] | 0x3; + ad714x->write(ad714x->dev, AD714X_PWR_CTRL, data); + + mutex_unlock(&ad714x->mutex); + + return 0; +} +EXPORT_SYMBOL(ad714x_disable); + +int ad714x_enable(struct ad714x_chip *ad714x) +{ + unsigned short data; + + dev_dbg(ad714x->dev, "%s enter\n", __func__); + + mutex_lock(&ad714x->mutex); + + /* resume to non-shutdown mode */ + + ad714x->write(ad714x->dev, AD714X_PWR_CTRL, + ad714x->hw->sys_cfg_reg[AD714X_PWR_CTRL]); + + /* make sure the interrupt output line is not low level after resume, + * otherwise we will get no chance to enter falling-edge irq again + */ + + ad714x->read(ad714x->dev, STG_LOW_INT_STA_REG, &data); + ad714x->read(ad714x->dev, STG_HIGH_INT_STA_REG, &data); + ad714x->read(ad714x->dev, STG_COM_INT_STA_REG, &data); + + mutex_unlock(&ad714x->mutex); + + return 0; +} +EXPORT_SYMBOL(ad714x_enable); +#endif + +MODULE_DESCRIPTION("Analog Devices AD714X Capacitance Touch Sensor Driver"); +MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/misc/ad714x.h b/drivers/input/misc/ad714x.h new file mode 100644 index 0000000..3fc5a16 --- /dev/null +++ b/drivers/input/misc/ad714x.h @@ -0,0 +1,25 @@ +/* + * AD714X CapTouch Programmable Controller driver (bus interfaces) + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef _AD714X_H_ +#define _AD714X_H_ + +#include + +struct device; +struct ad714x_chip; +typedef int (ad714x_read_t) (struct device *, unsigned short, unsigned short *); +typedef int (ad714x_write_t) (struct device *, unsigned short, unsigned short); + +int ad714x_disable(struct ad714x_chip *ad714x); +int ad714x_enable(struct ad714x_chip *ad714x); +int ad714x_probe(struct ad714x_chip **pad714x, struct device *dev, + u16 bus_type, int irq, ad714x_read_t read, ad714x_write_t write); +int ad714x_remove(struct ad714x_chip *ad714x); + +#endif diff --git a/include/linux/input.h b/include/linux/input.h index 0ccfc30..8b38cfa 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -756,6 +756,7 @@ struct input_absinfo { #define BUS_HOST 0x19 #define BUS_GSC 0x1A #define BUS_ATARI 0x1B +#define BUS_SPI 0x1C /* * MT_TOOL types diff --git a/include/linux/input/ad714x.h b/include/linux/input/ad714x.h new file mode 100644 index 0000000..0cbe5e8 --- /dev/null +++ b/include/linux/input/ad714x.h @@ -0,0 +1,63 @@ +/* + * include/linux/input/ad714x.h + * + * AD714x is very flexible, it can be used as buttons, scrollwheel, + * slider, touchpad at the same time. That depends on the boards. + * The platform_data for the device's "struct device" holds this + * information. + * + * Copyright 2009 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#ifndef __LINUX_INPUT_AD714X_H__ +#define __LINUX_INPUT_AD714X_H__ + +#define STAGE_NUM 12 +#define STAGE_CFGREG_NUM 8 +#define SYS_CFGREG_NUM 8 + +/* board information which need be initialized in arch/mach... */ +struct ad714x_slider_plat { + int start_stage; + int end_stage; + int max_coord; +}; + +struct ad714x_wheel_plat { + int start_stage; + int end_stage; + int max_coord; +}; + +struct ad714x_touchpad_plat { + int x_start_stage; + int x_end_stage; + int x_max_coord; + + int y_start_stage; + int y_end_stage; + int y_max_coord; +}; + +struct ad714x_button_plat { + int keycode; + unsigned short l_mask; + unsigned short h_mask; +}; + +struct ad714x_platform_data { + int slider_num; + int wheel_num; + int touchpad_num; + int button_num; + struct ad714x_slider_plat *slider; + struct ad714x_wheel_plat *wheel; + struct ad714x_touchpad_plat *touchpad; + struct ad714x_button_plat *button; + unsigned short stage_cfg_reg[STAGE_NUM][STAGE_CFGREG_NUM]; + unsigned short sys_cfg_reg[SYS_CFGREG_NUM]; +}; + +#endif