@@ -16,57 +16,48 @@
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/input.h>
#include <linux/slab.h>
#include <linux/interrupt.h>
-#include <asm/io.h>
#include <linux/i2c.h>
#include <linux/timer.h>
#include <linux/gpio.h>
#include <linux/hrtimer.h>
-
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/fs.h>
-#include <asm/ioctl.h>
-#include <asm/uaccess.h>
+#include <linux/init.h>
#include <linux/device.h>
-#include <linux/module.h>
+#include <linux/miscdevice.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/fs.h>
-#include <asm/ioctl.h>
-#include <linux/fs.h>
-#include <linux/init.h>
-#include <linux/miscdevice.h>
-#include <linux/module.h>
-
+#include <linux/io.h>
+#include <linux/ioctl.h>
+#include <linux/uaccess.h>
#define CY8CTMG110_DRIVER_NAME "cy8ctmg110"
-
-/*HW definations*/
+/* HW definitions */
#define CY8CTMG110_RESET_PIN_GPIO 43
#define CY8CTMG110_IRQ_PIN_GPIO 59
#define CY8CTMG110_I2C_ADDR 0x38
#define CY8CTMG110_I2C_ADDR_EXT 0x39
#define CY8CTMG110_I2C_ADDR_ 0x2 /*i2c address first sample */
-#define CY8CTMG110_I2C_ADDR__ 53 /*i2c address to FW where irq support missing */
+#define CY8CTMG110_I2C_ADDR__ 53 /*i2c address to FW where
+ irq support missing */
#define CY8CTMG110_TOUCH_IRQ 21
-#define CY8CTMG110_TOUCH_LENGHT 9787
-#define CY8CTMG110_SCREEN_LENGHT 8424
-
+#define CY8CTMG110_TOUCH_LENGTH 9787
+#define CY8CTMG110_SCREEN_LENGTH 8424
-/*Touch coordinates*/
+/* Touch coordinates */
#define CY8CTMG110_X_MIN 0
#define CY8CTMG110_Y_MIN 0
#define CY8CTMG110_X_MAX 864
#define CY8CTMG110_Y_MAX 480
-
-/*cy8ctmg110 registers defination*/
+/* cy8ctmg110 registers definition */
#define CY8CTMG110_TOUCH_WAKEUP_TIME 0
#define CY8CTMG110_TOUCH_SLEEP_TIME 2
#define CY8CTMG110_TOUCH_X1 3
@@ -77,21 +68,17 @@
#define CY8CTMG110_GESTURE 12
#define CY8CTMG110_REG_MAX 13
-#define CY8CTMG110_POLL_TIMER_DELAY 1000*1000*100
+#define CY8CTMG110_POLL_TIMER_DELAY (1000 * 1000 * 100)
#define TOUCH_MAX_I2C_FAILS 50
-/* Scale factors for coordinates */
-#define X_SCALE_FACTOR 9387/8424
-#define Y_SCALE_FACTOR 97/100
-
/* For tracing */
-static int g_y_trace_coord = 0;
+static int g_y_trace_coord;
module_param(g_y_trace_coord, int, 0600);
/* Polling mode */
-static int polling = 0;
+static int polling;
module_param(polling, int, 0);
-MODULE_PARM_DESC(polling, "Set to enabling polling of the touchscreen");
+MODULE_PARM_DESC(polling, "Set to enable polling of the touchscreen");
/*
@@ -102,7 +89,7 @@ struct ts_event {
int y1;
int x2;
int y2;
- bool event_sended;
+ bool event_sent;
};
/*
@@ -122,8 +109,8 @@ struct cy8ctmg110 {
};
/*
- * cy8ctmg110_poweroff is the routine that is called when touch hardware
- * will powered off
+ * cy8ctmg110_poweroff is the routine that is called
+ * when touch hardware will be powered off
*/
static void cy8ctmg110_power(bool poweron)
{
@@ -135,7 +122,6 @@ static void cy8ctmg110_power(bool poweron)
/*
* cy8ctmg110_write_req write regs to the i2c devices
- *
*/
static int cy8ctmg110_write_req(struct cy8ctmg110 *tsc, unsigned char reg,
unsigned char len, unsigned char *value)
@@ -152,7 +138,7 @@ static int cy8ctmg110_write_req(struct cy8ctmg110 *tsc, unsigned char reg,
ret = i2c_transfer(client->adapter, msg, 1);
if (ret != 1) {
- printk("cy8ctmg110 touch : i2c write data cmd failed \n");
+ pr_err("i2c write data cmd failed\n");
return ret;
}
return 0;
@@ -160,9 +146,7 @@ static int cy8ctmg110_write_req(struct cy8ctmg110 *tsc, unsigned char reg,
/*
* cy8ctmg110_read_req read regs from i2c devise
- *
*/
-
static int cy8ctmg110_read_req(struct cy8ctmg110 *tsc,
unsigned char *i2c_data, unsigned char len, unsigned char cmd)
{
@@ -208,23 +192,23 @@ static void cy8ctmg110_send_event(void *tsc)
x = ts->tc.x1;
y = ts->tc.y1;
- if (ts->tc.event_sended == false) {
+ if (!ts->tc.event_sent) {
input_report_key(input, BTN_TOUCH, 1);
ts->pending = true;
- x2 = (u16) (y * X_SCALE_FACTOR);
- y2 = (u16) (x * Y_SCALE_FACTOR);
+ x2 = (u16)(y * 9387 / 8424);
+ y2 = (u16)(x * 97 / 100);
input_report_abs(input, ABS_X, x2);
input_report_abs(input, ABS_Y, y2);
input_sync(input);
if (g_y_trace_coord)
- printk("cy8ctmg110 touch position X:%d (was = %d) Y:%d (was = %d)\n", x2, y, y2, x);
+ pr_info("position X:%d (was = %d) Y:%d (was = %d)\n",
+ x2, y, y2, x);
}
}
/*
* cy8ctmg110_touch_pos check touch position from i2c devices
- *
*/
static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc)
{
@@ -236,30 +220,29 @@ static int cy8ctmg110_touch_pos(struct cy8ctmg110 *tsc)
/*Reading coordinates */
if (cy8ctmg110_read_req(tsc, reg_p, 9, CY8CTMG110_TOUCH_X1) != 0)
return -EIO;
-
+
y = reg_p[2] << 8 | reg_p[3];
x = reg_p[0] << 8 | reg_p[1];
/*number of touch */
if (reg_p[8] == 0) {
- if (tsc->pending == true) {
+ if (tsc->pending) {
struct input_dev *input = tsc->input;
input_report_key(input, BTN_TOUCH, 0);
- tsc->tc.event_sended = true;
+ tsc->tc.event_sent = true;
tsc->pending = false;
}
} else if (tsc->tc.x1 != x || tsc->tc.y1 != y) {
tsc->tc.y1 = y;
tsc->tc.x1 = x;
- tsc->tc.event_sended = false;
+ tsc->tc.event_sent = false;
cy8ctmg110_send_event(tsc);
}
return 0;
}
/*
- * if interrupt isn't in use the touch positions can reads by polling
- *
+ * if interrupt isn't in use the touch positions can be read by polling
*/
static enum hrtimer_restart cy8ctmg110_timer(struct hrtimer *handle)
{
@@ -270,7 +253,9 @@ static enum hrtimer_restart cy8ctmg110_timer(struct hrtimer *handle)
cy8ctmg110_touch_pos(ts);
if (ts->i2c_fail_count < TOUCH_MAX_I2C_FAILS)
- hrtimer_start(&ts->timer, ktime_set(0, CY8CTMG110_POLL_TIMER_DELAY), HRTIMER_MODE_REL);
+ hrtimer_start(&ts->timer,
+ ktime_set(0, CY8CTMG110_POLL_TIMER_DELAY),
+ HRTIMER_MODE_REL);
spin_unlock_irqrestore(&ts->lock, flags);
return HRTIMER_NORESTART;
@@ -278,13 +263,12 @@ static enum hrtimer_restart cy8ctmg110_timer(struct hrtimer *handle)
/*
* cy8ctmg110_init_controller set init value to touchcontroller
- *
*/
static bool cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts)
{
unsigned char reg_p[3];
- if (ts->sleepmode == true) {
+ if (ts->sleepmode) {
reg_p[0] = 0x00;
reg_p[1] = 0xff;
reg_p[2] = 5;
@@ -303,15 +287,13 @@ static bool cy8ctmg110_set_sleepmode(struct cy8ctmg110 *ts)
/*
* cy8ctmg110_irq_handler irq handling function
- *
*/
-
static irqreturn_t cy8ctmg110_irq_handler(int irq, void *dev_id)
{
struct cy8ctmg110 *tsc = (struct cy8ctmg110 *) dev_id;
- if (tsc->initController == false) {
- if (cy8ctmg110_set_sleepmode(tsc) == true)
+ if (!tsc->initController) {
+ if (cy8ctmg110_set_sleepmode(tsc))
tsc->initController = true;
} else
cy8ctmg110_touch_pos(tsc);
@@ -322,8 +304,8 @@ static irqreturn_t cy8ctmg110_irq_handler(int irq, void *dev_id)
return IRQ_HANDLED;
}
-
-static int cy8ctmg110_probe(struct i2c_client *client, const struct i2c_device_id *id)
+static int cy8ctmg110_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
{
struct cy8ctmg110 *ts;
struct input_dev *input_dev;
@@ -350,7 +332,7 @@ static int cy8ctmg110_probe(struct i2c_client *client, const struct i2c_device_i
ts->sleepmode = false;
snprintf(ts->phys, sizeof(ts->phys), "%s/input0",
- dev_name(&client->dev));
+ dev_name(&client->dev));
input_dev->name = CY8CTMG110_DRIVER_NAME " Touchscreen";
input_dev->phys = ts->phys;
@@ -358,20 +340,22 @@ static int cy8ctmg110_probe(struct i2c_client *client, const struct i2c_device_i
spin_lock_init(&ts->lock);
- input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
- BIT_MASK(EV_REL) | BIT_MASK(EV_ABS);
+ input_dev->evbit[0] = (BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) |
+ BIT_MASK(EV_REL) | BIT_MASK(EV_ABS));
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_capability(input_dev, EV_KEY, KEY_F);
- input_set_abs_params(input_dev, ABS_X, CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 0, 0);
- input_set_abs_params(input_dev, ABS_Y, CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_X,
+ CY8CTMG110_X_MIN, CY8CTMG110_X_MAX, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y,
+ CY8CTMG110_Y_MIN, CY8CTMG110_Y_MAX, 0, 0);
err = gpio_request(CY8CTMG110_RESET_PIN_GPIO, NULL);
if (err) {
- dev_err(&client->dev, "cy8ctmg110_ts: Unable to request GPIO pin %d.\n",
- CY8CTMG110_RESET_PIN_GPIO);
+ dev_err(&client->dev, "Unable to request GPIO pin %d\n",
+ CY8CTMG110_RESET_PIN_GPIO);
goto err_free_irq;
}
cy8ctmg110_power(true);
@@ -385,14 +369,14 @@ static int cy8ctmg110_probe(struct i2c_client *client, const struct i2c_device_i
if (polling)
hrtimer_start(&ts->timer, ktime_set(10, 0), HRTIMER_MODE_REL);
- /* Can we fall back to polling if these bits fail - something to look
- at for robustness */
+ /* Can we fall back to polling if these bits fail?
+ - something to look at for robustness */
err = gpio_request(CY8CTMG110_IRQ_PIN_GPIO, "touch_irq_key");
if (err < 0) {
dev_err(&client->dev,
- "cy8ctmg110_ts: failed to request GPIO %d, error %d\n",
- CY8CTMG110_IRQ_PIN_GPIO, err);
+ "failed to request GPIO %d, error %d\n",
+ CY8CTMG110_IRQ_PIN_GPIO, err);
goto err_free_timer;
}
@@ -400,8 +384,8 @@ static int cy8ctmg110_probe(struct i2c_client *client, const struct i2c_device_i
if (err < 0) {
dev_err(&client->dev,
- "cy8ctmg110_ts: failed to configure input direction for GPIO %d, error %d\n",
- CY8CTMG110_IRQ_PIN_GPIO, err);
+ "failed to configure input direction for GPIO %d, error %d\n",
+ CY8CTMG110_IRQ_PIN_GPIO, err);
goto err_free_gpio;
}
client->irq = gpio_to_irq(CY8CTMG110_IRQ_PIN_GPIO);
@@ -409,15 +393,16 @@ static int cy8ctmg110_probe(struct i2c_client *client, const struct i2c_device_i
if (client->irq < 0) {
err = client->irq;
dev_err(&client->dev,
- "cy8ctmg110_ts: Unable to get irq number" " for GPIO %d, error %d\n",
- CY8CTMG110_IRQ_PIN_GPIO, err);
+ "Unable to get irq number for GPIO %d, error %d\n",
+ CY8CTMG110_IRQ_PIN_GPIO, err);
goto err_free_gpio;
}
- err = request_irq(client->irq, cy8ctmg110_irq_handler, IRQF_TRIGGER_RISING | IRQF_SHARED, "touch_reset_key", ts);
+ err = request_irq(client->irq, cy8ctmg110_irq_handler,
+ IRQF_TRIGGER_RISING | IRQF_SHARED,
+ "touch_reset_key", ts);
if (err < 0) {
dev_err(&client->dev,
- "cy8ctmg110 irq %d busy? error %d\n",
- client->irq, err);
+ "cy8ctmg110 irq %d busy? error %d\n", client->irq, err);
goto err_free_gpio;
}
@@ -439,9 +424,7 @@ err_free_mem:
/*
* cy8ctmg110_suspend
- *
*/
-
static int cy8ctmg110_suspend(struct i2c_client *client, pm_message_t mesg)
{
if (device_may_wakeup(&client->dev))
@@ -451,10 +434,8 @@ static int cy8ctmg110_suspend(struct i2c_client *client, pm_message_t mesg)
}
/*
- * cy8ctmg110_resume
- *
+ * cy8ctmg110_resume
*/
-
static int cy8ctmg110_resume(struct i2c_client *client)
{
if (device_may_wakeup(&client->dev))
@@ -465,9 +446,7 @@ static int cy8ctmg110_resume(struct i2c_client *client)
/*
* cy8ctmg110_remove
- *
*/
-
static int cy8ctmg110_remove(struct i2c_client *client)
{
struct cy8ctmg110 *ts = i2c_get_clientdata(client);