@@ -227,6 +227,11 @@ config SAMSUNG_DEV_TS
help
Common in platform device definitions for touchscreen device
+config SAMSUNG_DEV_KEYPAD
+ bool
+ help
+ Compile in platform device definitions for keypad
+
# DMA
config S3C_DMA
@@ -48,6 +48,7 @@ obj-$(CONFIG_S3C_DEV_RTC) += dev-rtc.o
obj-$(CONFIG_SAMSUNG_DEV_ADC) += dev-adc.o
obj-$(CONFIG_SAMSUNG_DEV_TS) += dev-ts.o
+obj-$(CONFIG_SAMSUNG_DEV_KEYPAD) += dev-keypad.o
# DMA support
new file mode 100644
@@ -0,0 +1,58 @@
+/*
+ * linux/arch/arm/plat-samsung/dev-keypad.c
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/platform_device.h>
+#include <mach/irqs.h>
+#include <mach/map.h>
+#include <plat/cpu.h>
+#include <plat/devs.h>
+#include <plat/keypad.h>
+
+static struct resource samsung_keypad_resources[] = {
+ [0] = {
+ .start = SAMSUNG_PA_KEYPAD,
+ .end = SAMSUNG_PA_KEYPAD + 0x20 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = IRQ_KEYPAD,
+ .end = IRQ_KEYPAD,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+struct platform_device samsung_device_keypad = {
+ .name = "samsung-keypad",
+ .id = -1,
+ .num_resources = ARRAY_SIZE(samsung_keypad_resources),
+ .resource = samsung_keypad_resources,
+};
+
+void __init samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd)
+{
+ struct samsung_keypad_platdata *npd;
+
+ if (!pd) {
+ printk(KERN_ERR "%s: no platform data\n", __func__);
+ return;
+ }
+
+ npd = kmemdup(pd, sizeof(struct samsung_keypad_platdata), GFP_KERNEL);
+ if (!npd)
+ printk(KERN_ERR "%s: no memory for platform data\n", __func__);
+
+ if (!npd->cfg_gpio)
+ npd->cfg_gpio = samsung_keypad_cfg_gpio;
+
+ samsung_device_keypad.dev.platform_data = npd;
+}
@@ -100,6 +100,8 @@ extern struct platform_device s5pc100_device_iis0;
extern struct platform_device s5pc100_device_iis1;
extern struct platform_device s5pc100_device_iis2;
+extern struct platform_device samsung_device_keypad;
+
/* s3c2440 specific devices */
#ifdef CONFIG_CPU_S3C2440
new file mode 100644
@@ -0,0 +1,59 @@
+/*
+ * linux/arch/arm/plat-samsung/include/plat/keypad.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * Samsung Platform - Keypad platform data definitions
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __PLAT_SAMSUNG_KEYPAD_H
+#define __PLAT_SAMSUNG_KEYPAD_H
+
+#include <linux/input/matrix_keypad.h>
+
+#define SAMSUNG_MAX_ROWS 8
+#define SAMSUNG_MAX_COLS 8
+
+/**
+ * struct samsung_keypad_platdata - Platform device data for Samsung Keypad.
+ * @keymap_data: pointer to &matrix_keymap_data.
+ * @rows: number of keypad row supported.
+ * @cols: number of keypad col supported.
+ * @no_autorepeat: disable key autorepeat.
+ * @wakeup: controls whether the device should be set up as wakeup source.
+ * @cfg_gpio: configure the GPIO.
+ *
+ * Initialisation data specific to either the machine or the platform
+ * for the device driver to use or call-back when configuring gpio.
+ */
+struct samsung_keypad_platdata {
+ const struct matrix_keymap_data *keymap_data;
+ unsigned int rows;
+ unsigned int cols;
+ bool no_autorepeat;
+ bool wakeup;
+
+ void (*cfg_gpio)(unsigned int rows, unsigned int cols);
+};
+
+/**
+ * samsung_keypad_set_platdata - Set platform data for Samsung Keypad device.
+ * @pd: Platform data to register to device.
+ *
+ * Register the given platform data for use with Samsung Keypad device.
+ * The call will copy the platform data, so the board definitions can
+ * make the structure itself __initdata.
+ */
+extern void samsung_keypad_set_platdata(struct samsung_keypad_platdata *pd);
+
+/* defined by architecture to configure gpio. */
+extern void samsung_keypad_cfg_gpio(unsigned int rows, unsigned int cols);
+
+#endif /* __PLAT_SAMSUNG_KEYPAD_H */
new file mode 100644
@@ -0,0 +1,49 @@
+/*
+ * linux/arch/arm/plat-samsung/include/plat/regs-keypad.h
+ *
+ * Copyright (C) 2010 Samsung Electronics Co.Ltd
+ * Author: Joonyoung Shim <jy0922.shim@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#ifndef __SAMSUNG_KEYPAD_H__
+#define __SAMSUNG_KEYPAD_H__
+
+#define SAMSUNG_KEYIFCON 0x00
+#define SAMSUNG_KEYIFSTSCLR 0x04
+#define SAMSUNG_KEYIFCOL 0x08
+#define SAMSUNG_KEYIFROW 0x0c
+#define SAMSUNG_KEYIFFC 0x10
+
+/* SAMSUNG_KEYIFCON */
+#define SAMSUNG_KEYIFCON_INT_F_EN (1 << 0)
+#define SAMSUNG_KEYIFCON_INT_R_EN (1 << 1)
+#define SAMSUNG_KEYIFCON_DF_EN (1 << 2)
+#define SAMSUNG_KEYIFCON_FC_EN (1 << 3)
+#define SAMSUNG_KEYIFCON_WAKEUPEN (1 << 4)
+
+/* SAMSUNG_KEYIFSTSCLR */
+#define SAMSUNG_KEYIFSTSCLR_P_INT_MASK (0xff << 0)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_MASK (0xff << 8)
+#define SAMSUNG_KEYIFSTSCLR_R_INT_OFFSET 8
+#define S5PV210_KEYIFSTSCLR_P_INT_MASK (0x3fff << 0)
+#define S5PV210_KEYIFSTSCLR_R_INT_MASK (0x3fff << 16)
+#define S5PV210_KEYIFSTSCLR_R_INT_OFFSET 16
+
+/* SAMSUNG_KEYIFCOL */
+#define SAMSUNG_KEYIFCOL_MASK (0xff << 0)
+#define S5PV210_KEYIFCOLEN_MASK (0xff << 8)
+
+/* SAMSUNG_KEYIFROW */
+#define SAMSUNG_KEYIFROW_MASK (0xff << 0)
+#define S5PV210_KEYIFROW_MASK (0x3fff << 0)
+
+/* SAMSUNG_KEYIFFC */
+#define SAMSUNG_KEYIFFC_MASK (0x3ff << 0)
+
+#endif /* __SAMSUNG_KEYPAD_H__ */