@@ -315,6 +315,18 @@ config KEYBOARD_MCS
To compile this driver as a module, choose M here: the
module will be called mcs_touchkey.
+config KEYBOARD_MPR121
+ tristate "Freescale MPR121 Touchkey"
+ depends on I2C
+ help
+ Say Y here if you have Freescale MPR121 touchkey controller
+ chip in your system.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called mpr121_touchkey.
+
config KEYBOARD_IMX
tristate "IMX keypad support"
depends on ARCH_MXC
@@ -27,6 +27,7 @@ obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o
obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o
obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o
obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o
+obj-$(CONFIG_KEYBOARD_MPR121) += mpr121_touchkey.o
obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o
obj-$(CONFIG_KEYBOARD_NOMADIK) += nomadik-ske-keypad.o
obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o
new file mode 100644
@@ -0,0 +1,330 @@
+/*
+ * Touchkey driver for Freescale MPR121 Controllor
+ *
+ * Copyright (C) 2011 Freescale Semiconductor, Inc.
+ * Author: Zhang Jiejing <jiejing.zhang@freescale.com>
+ *
+ * Based on mcs_touchkey.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/i2c/mpr.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/input/matrix_keypad.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/bitops.h>
+
+/* Register definitions */
+#define ELE_TOUCH_STATUS_0_ADDR 0x0
+#define ELE_TOUCH_STATUS_1_ADDR 0X1
+#define MHD_RISING_ADDR 0x2b
+#define NHD_RISING_ADDR 0x2c
+#define NCL_RISING_ADDR 0x2d
+#define FDL_RISING_ADDR 0x2e
+#define MHD_FALLING_ADDR 0x2f
+#define NHD_FALLING_ADDR 0x30
+#define NCL_FALLING_ADDR 0x31
+#define FDL_FALLING_ADDR 0x32
+#define ELE0_TOUCH_THRESHOLD_ADDR 0x41
+#define ELE0_RELEASE_THRESHOLD_ADDR 0x42
+#define AFE_CONF_ADDR 0x5c
+#define FILTER_CONF_ADDR 0x5d
+
+/* ELECTRODE_CONF_ADDR: This register mainly configures the number of
+ * enabled capacitance sensing inputs and its run/suspend mode. */
+#define ELECTRODE_CONF_ADDR 0x5e
+#define AUTO_CONFIG_CTRL_ADDR 0x7b
+#define AUTO_CONFIG_USL_ADDR 0x7d
+#define AUTO_CONFIG_LSL_ADDR 0x7e
+#define AUTO_CONFIG_TL_ADDR 0x7f
+
+/* Threshold of touch/release trigger */
+#define TOUCH_THRESHOLD 0x0f
+#define RELEASE_THRESHOLD 0x0a
+/* Masks for touch and release triggers */
+#define TOUCH_STATUS_MASK 0xfff
+/* MPR121 have 12 keys */
+#define MPR121_MAX_KEY_COUNT 12
+
+struct mpr121_touchkey {
+ struct i2c_client *client;
+ struct input_dev *input_dev;
+ unsigned int key_val;
+ int statusbits;
+ int keycount;
+ u16 keycodes[MPR121_MAX_KEY_COUNT];
+};
+
+struct mpr121_init_register {
+ int addr;
+ u8 val;
+};
+
+static const
+struct mpr121_init_register init_reg_table[] __devinitconst = {
+ {MHD_RISING_ADDR, 0x1},
+ {NHD_RISING_ADDR, 0x1},
+ {MHD_FALLING_ADDR, 0x1},
+ {NHD_FALLING_ADDR, 0x1},
+ {NCL_FALLING_ADDR, 0xff},
+ {FDL_FALLING_ADDR, 0x02},
+ {FILTER_CONF_ADDR, 0x04},
+ {AFE_CONF_ADDR, 0x0b},
+ {AUTO_CONFIG_CTRL_ADDR, 0x0b},
+};
+
+static irqreturn_t mpr_touchkey_interrupt(int irq, void *dev_id)
+{
+ struct mpr121_touchkey *mpr121 = dev_id;
+ struct i2c_client *client = mpr121->client;
+ struct input_dev *input = mpr121->input_dev;
+ unsigned int key_num, pressed;
+ int reg;
+
+ reg = i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_1_ADDR);
+ if (reg < 0) {
+ dev_err(&client->dev, "i2c read error [%d]\n", reg);
+ goto out;
+ }
+
+ reg <<= 8;
+ reg |= i2c_smbus_read_byte_data(client, ELE_TOUCH_STATUS_0_ADDR);
+ if (reg < 0) {
+ dev_err(&client->dev, "i2c read error [%d]\n", reg);
+ goto out;
+ }
+
+ reg &= TOUCH_STATUS_MASK;
+ /* use old press bit to figure out which bit changed */
+ key_num = ffs(reg ^ mpr121->statusbits) - 1;
+ pressed = reg & (1 << (key_num));
+ mpr121->statusbits = reg;
+ mpr121->key_val = mpr121->keycodes[key_num];
+
+ input_event(input, EV_MSC, MSC_SCAN, key_num);
+ input_report_key(input, mpr121->key_val, pressed);
+ input_sync(input);
+
+ dev_dbg(&client->dev, "key %d %d %s\n", key_num, mpr121->key_val,
+ pressed ? "pressed" : "released");
+
+out:
+ return IRQ_HANDLED;
+}
+
+static int __devinit mpr121_phys_init(const struct mpr121_platform_data *pdata,
+ struct mpr121_touchkey *mpr121,
+ struct i2c_client *client)
+{
+ const struct mpr121_init_register *reg;
+ unsigned char usl, lsl, tl;
+ int i, t, vdd, ret;
+
+ /* setup touch/release threshold for ele0-ele11 */
+ for (i = 0; i <= MPR121_MAX_KEY_COUNT; i++) {
+ t = ELE0_TOUCH_THRESHOLD_ADDR + (i * 2);
+ ret = i2c_smbus_write_byte_data(client, t, TOUCH_THRESHOLD);
+ if (ret < 0)
+ goto err_i2c_write;
+ ret = i2c_smbus_write_byte_data(client, t + 1,
+ RELEASE_THRESHOLD);
+ if (ret < 0)
+ goto err_i2c_write;
+ }
+ /* setup init register */
+ for (i = 0; i < ARRAY_SIZE(init_reg_table); i++) {
+ reg = &init_reg_table[i];
+ ret = i2c_smbus_write_byte_data(client, reg->addr, reg->val);
+ if (ret < 0)
+ goto err_i2c_write;
+ }
+
+
+ /* Capacitance on sensing input varies and needs to be
+ * compensated. The internal MPR121-auto-configuration can do
+ * this if it's registers are set properly (based on
+ * pdata->vdd_uv). */
+ vdd = pdata->vdd_uv / 1000;
+ usl = ((vdd - 700) * 256) / vdd;
+ lsl = (usl * 65) / 100;
+ tl = (usl * 90) / 100;
+ ret = i2c_smbus_write_byte_data(client, AUTO_CONFIG_USL_ADDR, usl);
+ ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_LSL_ADDR, lsl);
+ ret |= i2c_smbus_write_byte_data(client, AUTO_CONFIG_TL_ADDR, tl);
+ ret |= i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
+ mpr121->keycount);
+ if (ret != 0)
+ goto err_i2c_write;
+
+ dev_dbg(&client->dev, "mpr121: setup with %x keys.\n",
+ mpr121->keycount);
+
+ return 0;
+
+err_i2c_write:
+ dev_err(&client->dev, "i2c write error: %d\n", ret);
+ return ret;
+}
+
+static int __devinit mpr_touchkey_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ const struct mpr121_platform_data *pdata = client->dev.platform_data;
+ struct mpr121_touchkey *mpr121;
+ struct input_dev *input_dev;
+ int error;
+ int i;
+
+ if (!pdata) {
+ dev_err(&client->dev, "no platform data defined\n");
+ return -EINVAL;
+ }
+
+ if (!client->irq) {
+ dev_err(&client->dev, "The irq number should not be zero\n");
+ return -EINVAL;
+ }
+
+ mpr121 = kzalloc(sizeof(struct mpr121_touchkey), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!mpr121 || !input_dev) {
+ dev_err(&client->dev, "Failed to allocate memory\n");
+ error = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ mpr121->client = client;
+ mpr121->input_dev = input_dev;
+ mpr121->keycount = pdata->matrix->keymap_size;
+
+ if (mpr121->keycount > MPR121_MAX_KEY_COUNT) {
+ dev_err(&client->dev, "too many keys defined\n");
+ error = -EINVAL;
+ goto err_free_mem;
+ }
+
+ error = mpr121_phys_init(pdata, mpr121, client);
+ if (error) {
+ dev_err(&client->dev, "Failed to init register\n");
+ goto err_free_mem;
+ }
+
+ input_dev->name = "Freescale MPR121 Touchkey";
+ input_dev->id.bustype = BUS_I2C;
+ input_dev->dev.parent = &client->dev;
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP);
+ input_dev->keycodesize = sizeof(mpr121->keycodes[0]);
+ input_dev->keycodemax = mpr121->keycount;
+
+ for (i = 0; i < input_dev->keycodemax; i++) {
+ input_set_capability(input_dev, EV_KEY,
+ KEY_VAL(pdata->matrix->keymap[i]));
+ mpr121->keycodes[i] = KEY_VAL(pdata->matrix->keymap[i]);
+ }
+
+ error = request_threaded_irq(client->irq, NULL,
+ mpr_touchkey_interrupt,
+ IRQF_TRIGGER_FALLING,
+ client->dev.driver->name, mpr121);
+ if (error) {
+ dev_err(&client->dev, "Failed to register interrupt\n");
+ goto err_free_mem;
+ }
+
+ error = input_register_device(input_dev);
+ if (error)
+ goto err_free_irq;
+ i2c_set_clientdata(client, mpr121);
+ device_init_wakeup(&client->dev, pdata->wakeup);
+ return 0;
+
+err_free_irq:
+ free_irq(client->irq, mpr121);
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(mpr121);
+ return error;
+}
+
+static int __devexit mpr_touchkey_remove(struct i2c_client *client)
+{
+ struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
+
+ free_irq(client->irq, mpr121);
+ input_unregister_device(mpr121->input_dev);
+ kfree(mpr121);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int mpr_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+
+ if (device_may_wakeup(&client->dev))
+ enable_irq_wake(client->irq);
+
+ i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR, 0x00);
+
+ return 0;
+}
+
+static int mpr_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct mpr121_touchkey *mpr121 = i2c_get_clientdata(client);
+
+ if (device_may_wakeup(&client->dev))
+ disable_irq_wake(client->irq);
+
+ i2c_smbus_write_byte_data(client, ELECTRODE_CONF_ADDR,
+ mpr121->keycount);
+
+ return 0;
+}
+#endif
+
+static const struct i2c_device_id mpr121_id[] = {
+ {"mpr121_touchkey", 0},
+ {}
+};
+
+static SIMPLE_DEV_PM_OPS(mpr121_touchkey_pm_ops, mpr_suspend, mpr_resume);
+
+static struct i2c_driver mpr_touchkey_driver = {
+ .driver = {
+ .name = "mpr121",
+ .owner = THIS_MODULE,
+ .pm = &mpr121_touchkey_pm_ops,
+ },
+ .id_table = mpr121_id,
+ .probe = mpr_touchkey_probe,
+ .remove = __devexit_p(mpr_touchkey_remove),
+};
+
+static int __init mpr_touchkey_init(void)
+{
+ return i2c_add_driver(&mpr_touchkey_driver);
+}
+
+static void __exit mpr_touchkey_exit(void)
+{
+ i2c_del_driver(&mpr_touchkey_driver);
+}
+
+module_init(mpr_touchkey_init);
+module_exit(mpr_touchkey_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Zhang Jiejing <jiejing.zhang@freescale.com>");
+MODULE_DESCRIPTION("Touch Key driver for Freescale MPR121 Chip");
new file mode 100644
@@ -0,0 +1,19 @@
+/* Header file for Freescale MPR121 Capacitive Touch Sensor */
+
+#ifndef MPR_H
+#define MPR_H
+
+struct matrix_keymap_data;
+
+/**
+ * @matrix: pointer to &matrix_keymap_data.
+ * @wakeup: configure the button as a wake-up source
+ * @vdd_uv: VDD voltage in uV
+ */
+struct mpr121_platform_data {
+ const struct matrix_keymap_data *matrix;
+ bool wakeup;
+ int vdd_uv;
+};
+
+#endif
This patch adds basic support for Freescale MPR121 capacitive touch sensor. It's an i2c controller with up to 12 capacitance sensing inputs. Product information (data sheet, application notes) can be found here: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MPR121 Signed-off-by: Zhang Jiejing <jiejing.zhang@freescale.com> --- Changes since v3: 1. spell fixs. Changes since v2: 1. remove a endif in Kconfig 2. comments style align Changes since v1: 1. change files name from mpr121.c to mpr121_touchkey.c 2. lots of typo fix, thanks to Christoph Fritz 3. correct data declear function. 4. fix report MSC_SCAN to report key_num 5. remove print 6. use matrix_keypad_data in platform_data 7. move register define into .c file rather than header file. --- drivers/input/keyboard/Kconfig | 12 + drivers/input/keyboard/Makefile | 1 + drivers/input/keyboard/mpr121_touchkey.c | 330 ++++++++++++++++++++++++++++++ include/linux/i2c/mpr.h | 19 ++ 4 files changed, 362 insertions(+), 0 deletions(-) create mode 100644 drivers/input/keyboard/mpr121_touchkey.c create mode 100644 include/linux/i2c/mpr.h