--- linux/drivers/input/joystick/xpad.c.orig	2011-06-11 19:49:56.964914370 -0700
+++ linux/drivers/input/joystick/xpad.c	2011-06-12 16:38:14.911710960 -0700
@@ -251,13 +251,12 @@ struct usb_xpad {
 
 	int pad_present;
 
+	int interface_number;
+
 	struct urb *irq_in;		/* urb for interrupt in report */
 	unsigned char *idata;		/* input data */
 	dma_addr_t idata_dma;
 
-	struct urb *bulk_out;
-	unsigned char *bdata;
-
 #if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
 	struct urb *irq_out;		/* urb for interrupt out report */
 	unsigned char *odata;		/* output data */
@@ -437,8 +436,23 @@ static void xpad360w_process_packet(stru
 	/* Presence change */
 	if (data[0] & 0x08) {
 		if (data[1] & 0x80) {
+#if defined(CONFIG_JOYSTICK_XPAD_LEDS)
+			xpad->odata[0] = 0x00;
+			xpad->odata[1] = 0x00;
+			xpad->odata[2] = 0x08;
+			xpad->odata[3] = 0x42 + (xpad->interface_number & 6) / 2;
+			xpad->odata[4] = 0x00;
+			xpad->odata[5] = 0x00;
+			xpad->odata[6] = 0x00;
+			xpad->odata[7] = 0x00;
+			xpad->odata[8] = 0x00;
+			xpad->odata[9] = 0x00;
+			xpad->odata[10] = 0x00;
+			xpad->odata[11] = 0x00;
+			xpad->irq_out->transfer_buffer_length = 12;
+			usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+#endif
 			xpad->pad_present = 1;
-			usb_submit_urb(xpad->bulk_out, GFP_ATOMIC);
 		} else
 			xpad->pad_present = 0;
 	}
@@ -492,23 +506,6 @@ exit:
 		     __func__, retval);
 }
 
-static void xpad_bulk_out(struct urb *urb)
-{
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__, urb->status);
-		break;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__, urb->status);
-	}
-}
-
 #if defined(CONFIG_JOYSTICK_XPAD_FF) || defined(CONFIG_JOYSTICK_XPAD_LEDS)
 static void xpad_irq_out(struct urb *urb)
 {
@@ -667,14 +664,37 @@ struct xpad_led {
 
 static void xpad_send_led_command(struct usb_xpad *xpad, int command)
 {
-	if (command >= 0 && command < 14) {
-		mutex_lock(&xpad->odata_mutex);
-		xpad->odata[0] = 0x01;
-		xpad->odata[1] = 0x03;
-		xpad->odata[2] = command;
-		xpad->irq_out->transfer_buffer_length = 3;
-		usb_submit_urb(xpad->irq_out, GFP_KERNEL);
-		mutex_unlock(&xpad->odata_mutex);
+	if (xpad->xtype == XTYPE_XBOX || xpad->xtype == XTYPE_XBOX360) {
+		if (command >= 0 && command < 14) {
+			mutex_lock(&xpad->odata_mutex);
+			xpad->odata[0] = 0x01;
+			xpad->odata[1] = 0x03;
+			xpad->odata[2] = command;
+			xpad->irq_out->transfer_buffer_length = 3;
+			usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+			mutex_unlock(&xpad->odata_mutex);
+		}
+	} else if (xpad->xtype == XTYPE_XBOX360W) {
+		if (command >= 0 && command < 16) {
+			if (command == 16)
+				command = 2 + (xpad->interface_number & 6) / 2;
+			mutex_lock(&xpad->odata_mutex);
+			xpad->odata[0] = 0x00;
+			xpad->odata[1] = 0x00;
+			xpad->odata[2] = 0x08;
+			xpad->odata[3] = 0x40 + command;
+			xpad->odata[4] = 0x00;
+			xpad->odata[5] = 0x00;
+			xpad->odata[6] = 0x00;
+			xpad->odata[7] = 0x00;
+			xpad->odata[8] = 0x00;
+			xpad->odata[9] = 0x00;
+			xpad->odata[10] = 0x00;
+			xpad->odata[11] = 0x00;
+			xpad->irq_out->transfer_buffer_length = 12;
+			usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+			mutex_unlock(&xpad->odata_mutex);
+		}
 	}
 }
 
@@ -695,7 +715,7 @@ static int xpad_led_probe(struct usb_xpa
 	struct led_classdev *led_cdev;
 	int error;
 
-	if (xpad->xtype != XTYPE_XBOX360)
+	if (xpad->xtype != XTYPE_XBOX360 && xpad->xtype != XTYPE_XBOX360W)
 		return 0;
 
 	xpad->led = led = kzalloc(sizeof(struct xpad_led), GFP_KERNEL);
@@ -721,7 +741,8 @@ static int xpad_led_probe(struct usb_xpa
 	/*
 	 * Light up the segment corresponding to controller number
 	 */
-	xpad_send_led_command(xpad, (led_no % 4) + 2);
+	if (xpad->xtype == XTYPE_XBOX360)
+		xpad_send_led_command(xpad, (led_no % 4) + 2);
 
 	return 0;
 }
@@ -921,43 +942,9 @@ static int xpad_probe(struct usb_interfa
 
 	usb_set_intfdata(intf, xpad);
 
-	if (xpad->xtype == XTYPE_XBOX360W) {
-		/*
-		 * Setup the message to set the LEDs on the
-		 * controller when it shows up
-		 */
-		xpad->bulk_out = usb_alloc_urb(0, GFP_KERNEL);
-		if (!xpad->bulk_out) {
-			error = -ENOMEM;
-			goto fail7;
-		}
-
-		xpad->bdata = kzalloc(XPAD_PKT_LEN, GFP_KERNEL);
-		if (!xpad->bdata) {
-			error = -ENOMEM;
-			goto fail8;
-		}
-
-		xpad->bdata[2] = 0x08;
-		switch (intf->cur_altsetting->desc.bInterfaceNumber) {
-		case 0:
-			xpad->bdata[3] = 0x42;
-			break;
-		case 2:
-			xpad->bdata[3] = 0x43;
-			break;
-		case 4:
-			xpad->bdata[3] = 0x44;
-			break;
-		case 6:
-			xpad->bdata[3] = 0x45;
-		}
-
-		ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
-		usb_fill_bulk_urb(xpad->bulk_out, udev,
-				usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
-				xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+	xpad->interface_number = intf->cur_altsetting->desc.bInterfaceNumber;
 
+	if (xpad->xtype == XTYPE_XBOX360W) {
 		/*
 		 * Submit the int URB immediately rather than waiting for open
 		 * because we get status messages from the device whether
@@ -968,13 +955,11 @@ static int xpad_probe(struct usb_interfa
 		xpad->irq_in->dev = xpad->udev;
 		error = usb_submit_urb(xpad->irq_in, GFP_KERNEL);
 		if (error)
-			goto fail9;
+			goto fail7;
 	}
 
 	return 0;
 
- fail9:	kfree(xpad->bdata);
- fail8:	usb_free_urb(xpad->bulk_out);
  fail7:	input_unregister_device(input_dev);
 	input_dev = NULL;
  fail6:	xpad_led_disconnect(xpad);
@@ -998,8 +983,6 @@ static void xpad_disconnect(struct usb_i
 	xpad_deinit_output(xpad);
 
 	if (xpad->xtype == XTYPE_XBOX360W) {
-		usb_kill_urb(xpad->bulk_out);
-		usb_free_urb(xpad->bulk_out);
 		usb_kill_urb(xpad->irq_in);
 	}
 
@@ -1007,7 +990,6 @@ static void xpad_disconnect(struct usb_i
 	usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
 			xpad->idata, xpad->idata_dma);
 
-	kfree(xpad->bdata);
 	kfree(xpad);
 
 	usb_set_intfdata(intf, NULL);
