From patchwork Mon Jul 23 12:18:47 2012 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Thierry Reding X-Patchwork-Id: 1227461 Return-Path: X-Original-To: patchwork-linux-input@patchwork.kernel.org Delivered-To: patchwork-process-083081@patchwork1.kernel.org Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by patchwork1.kernel.org (Postfix) with ESMTP id D147F3FD4F for ; Mon, 23 Jul 2012 12:19:06 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752587Ab2GWMTF (ORCPT ); Mon, 23 Jul 2012 08:19:05 -0400 Received: from moutng.kundenserver.de ([212.227.126.187]:62009 "EHLO moutng.kundenserver.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752423Ab2GWMTD (ORCPT ); Mon, 23 Jul 2012 08:19:03 -0400 Received: from mailbox.adnet.avionic-design.de (mailbox.avionic-design.de [109.75.18.3]) by mrelayeu.kundenserver.de (node=mreu3) with ESMTP (Nemesis) id 0MD19D-1T2OP13BXH-009gca; Mon, 23 Jul 2012 14:18:52 +0200 Received: from localhost (localhost [127.0.0.1]) by mailbox.adnet.avionic-design.de (Postfix) with ESMTP id 467262A282C8; Mon, 23 Jul 2012 14:18:52 +0200 (CEST) X-Virus-Scanned: amavisd-new at avionic-design.de Received: from mailbox.adnet.avionic-design.de ([127.0.0.1]) by localhost (mailbox.avionic-design.de [127.0.0.1]) (amavisd-new, port 10024) with ESMTP id vYjWhv0yGj2U; Mon, 23 Jul 2012 14:18:49 +0200 (CEST) Received: from localhost (avionic-0098.adnet.avionic-design.de [172.20.31.233]) (Authenticated sender: thierry.reding) by mailbox.adnet.avionic-design.de (Postfix) with ESMTPA id CD1212A2830D; Mon, 23 Jul 2012 14:18:48 +0200 (CEST) From: Thierry Reding To: Dmitry Torokhov Cc: linux-input@vger.kernel.org, Grant Likely , Rob Herring , devicetree-discuss@lists.ozlabs.org Subject: [PATCH v2 2/2] input: Add support for the Semtech SX8634 controller Date: Mon, 23 Jul 2012 14:18:47 +0200 Message-Id: <1343045927-22063-2-git-send-email-thierry.reding@avionic-design.de> X-Mailer: git-send-email 1.7.11.2 In-Reply-To: <1343045927-22063-1-git-send-email-thierry.reding@avionic-design.de> References: <1343045927-22063-1-git-send-email-thierry.reding@avionic-design.de> X-Provags-ID: V02:K0:ZWgX6P0HPfeaQxsyp3tSXSzq4+ww1OYdIcczem+a9VS HGK5ai3qr2yK1pqyHeWBW9Pe3Su2g7zdlnyJlBi8B4aD1CgOeQ bjKByMi/vVWAodjyR8/gPhmqizpXadsGMMuS29GxrTfAMf4FJL 66uqTWQ0Y6ZlnQ3PPmMkl/P/BDi36LkwNHzxyRyst4Atid2gO8 LMldeJ3GmNUcNOjsz5cGtyyMld6pbqxaGbyEIwSKTwkcUzuclO dJl7UjY/RrVOx9PY58m6gXoym+k/x0n2N+YcO6Uaeni8FQVWSI jaZCfRfRKIGbLGhsJ+HtJD92CAf6iHpaQXyrDkx6bO6ERFkrgi ETPCHXyULVUCAtTvlwbdJcIr/CxQsgSjWcTbHyaNpcKQM86uSp BWlhF+4nkP6+qn1S6KcJMVNczi7wmUxWbdVdBb/vL4gr7ThQW3 9dkZr Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org This commit adds support for the Semtech SX8634 Capacitive Button and Slider Touch controller. Cc: Dmitry Torokhov Cc: linux-input@vger.kernel.org Cc: Grant Likely Cc: Rob Herring Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Thierry Reding --- Changes in v2: - add OF device table - use smtc vendor prefix - fix build warnings - add power-gpios property Documentation/devicetree/bindings/input/sx8634.txt | 58 ++ drivers/input/misc/Kconfig | 10 + drivers/input/misc/Makefile | 1 + drivers/input/misc/sx8634.c | 785 +++++++++++++++++++++ include/linux/input/sx8634.h | 33 + 5 files changed, 887 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/sx8634.txt create mode 100644 drivers/input/misc/sx8634.c create mode 100644 include/linux/input/sx8634.h diff --git a/Documentation/devicetree/bindings/input/sx8634.txt b/Documentation/devicetree/bindings/input/sx8634.txt new file mode 100644 index 0000000..65e2e10 --- /dev/null +++ b/Documentation/devicetree/bindings/input/sx8634.txt @@ -0,0 +1,58 @@ +Semtech SX8634 Capacitive Button and Slider Touch Controller + +The SX8634 controller is configured with the following properties: + + Required properties: + - compatible: "smtc,sx8634" + - reg: I2C bus address of the device + - interrupts: interrupt number of the device + - #address-cells: must be <1> + - #size-cells: must be <0> + + Optional Properties: + - threshold: number of ticks required to detect a touch/release + - range: 0x00 to 0xff + - default: 0xa0 + - sensitivity: sensitivity of the sensors + - range: 0x0 to 0x7 + - default: 0x0 + +Each capacitive sensor is configured via a separate sub-node: + + Required Properties: + - reg: sensor index + - label: name of the sensor + - linux,code: Keycode to emit for buttons. If absent, the capacitive sensor + is part of the slider element. + + Optional Properties: + - threshold: overrides the global threshold setting + - sensitivity: overrides the global sensitivity setting + +Example: + + keypad: sx8634@2b { + compatible = "smtc,sx8634"; + reg = <0x2b>; + + interrupt-parent = <&gpioext>; + interrupts = <3>; + + #address-cells = <1>; + #size-cells = <0>; + + threshold = <0xa0>; + sensitivity = <7>; + + cap@1 { + reg = <1>; + label = "Up"; + linux,code = <103>; /* KEY_UP */ + }; + + cap@2 { + reg = <2>; + label = "Down"; + linux,code = <108>; /* KEY_DOWN */ + }; + }; diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 7faf4a7..61e48e5 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -577,6 +577,16 @@ config INPUT_CMA3000_I2C To compile this driver as a module, choose M here: the module will be called cma3000_d0x_i2c. +config INPUT_SX8634 + tristate "Semtech SX8634" + depends on I2C + default n + help + Say Y here if you want to use the Semtech SX8634 controller. + + To compile this driver as a module, choose M here: the module will + be called sx8634. + config INPUT_XEN_KBDDEV_FRONTEND tristate "Xen virtual keyboard and mouse support" depends on XEN diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile index f55cdf4..7a86fac 100644 --- a/drivers/input/misc/Makefile +++ b/drivers/input/misc/Makefile @@ -53,5 +53,6 @@ obj-$(CONFIG_INPUT_TWL6040_VIBRA) += twl6040-vibra.o obj-$(CONFIG_INPUT_UINPUT) += uinput.o obj-$(CONFIG_INPUT_WISTRON_BTNS) += wistron_btns.o obj-$(CONFIG_INPUT_WM831X_ON) += wm831x-on.o +obj-$(CONFIG_INPUT_SX8634) += sx8634.o obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND) += xen-kbdfront.o obj-$(CONFIG_INPUT_YEALINK) += yealink.o diff --git a/drivers/input/misc/sx8634.c b/drivers/input/misc/sx8634.c new file mode 100644 index 0000000..4e58b1e --- /dev/null +++ b/drivers/input/misc/sx8634.c @@ -0,0 +1,785 @@ +/* + * Copyright (C) 2011-2012 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define I2C_IRQ_SRC 0x00 +#define I2C_IRQ_SRC_MODE (1 << 0) +#define I2C_IRQ_SRC_COMPENSATION (1 << 1) +#define I2C_IRQ_SRC_BUTTONS (1 << 2) +#define I2C_IRQ_SRC_SLIDER (1 << 3) +#define I2C_IRQ_SRC_GPI (1 << 4) +#define I2C_IRQ_SRC_SPM (1 << 5) +#define I2C_IRQ_SRC_NVM (1 << 6) +#define I2C_IRQ_SRC_READY (1 << 7) + +#define I2C_CAP_STAT_MSB 0x01 +#define I2C_CAP_STAT_LSB 0x02 +#define I2C_SLD_POS_MSB 0x03 +#define I2C_SLD_POS_LSB 0x04 +#define I2C_GPI_STAT 0x07 +#define I2C_SPM_STAT 0x08 +#define I2C_COMP_OP_MODE 0x09 +#define I2C_GPO_CTRL 0x0a +#define I2C_GPP_PIN_ID 0x0b +#define I2C_GPP_INTENSITY 0x0c +#define I2C_SPM_CFG 0x0d +#define I2C_SPM_CFG_WRITE (0 << 3) +#define I2C_SPM_CFG_READ (1 << 3) +#define I2C_SPM_CFG_OFF (0 << 4) +#define I2C_SPM_CFG_ON (1 << 4) +#define I2C_SPM_BASE 0x0e +#define I2C_SPM_KEY_MSB 0xac +#define I2C_SPM_KEY_LSB 0xad +#define I2C_SOFT_RESET 0xb1 + +#define SPM_CFG 0x00 +#define SPM_CAP_MODE_MISC 0x09 + +#define SPM_CAP_MODE(x) (((x) <= 3) ? 0x0c : (((x) <= 7) ? 0x0b : 0x0a)) +#define SPM_CAP_MODE_SHIFT(x) (((x) & 3) * 2) +#define SPM_CAP_MODE_MASK 0x3 +#define SPM_CAP_MODE_MASK_SHIFTED(x) (SPM_CAP_MODE_MASK << SPM_CAP_MODE_SHIFT(x)) + +#define SPM_CAP_SENS(x) (0x0d + ((x) / 2)) +#define SPM_CAP_SENS_MAX 0x7 +#define SPM_CAP_SENS_SHIFT(x) (((x) & 1) ? 0 : 4) +#define SPM_CAP_SENS_MASK 0x7 +#define SPM_CAP_SENS_MASK_SHIFTED(x) (SPM_CAP_SENS_MASK << SPM_CAP_SENS_SHIFT(x)) + +#define SPM_CAP_THRESHOLD(x) (0x13 + (x)) +#define SPM_CAP_THRESHOLD_MAX 0xff + +#define SPM_BLOCK_SIZE 8 +#define SPM_NUM_BLOCKS 16 +#define SPM_SIZE (SPM_BLOCK_SIZE * SPM_NUM_BLOCKS) + +#define SLD_POS_STEP 12 + +struct sx8634 { + struct i2c_client *client; + struct input_dev *input; + unsigned short keycodes[SX8634_NUM_CAPS]; + unsigned long spm_dirty; + u8 *spm_cache; + u16 slider_max; + u16 status; + int power_gpio; +}; + +static int spm_wait(struct i2c_client *client) +{ + unsigned int retries = 32; + int err; + + do { + err = i2c_smbus_read_byte_data(client, I2C_IRQ_SRC); + if (err < 0) + return err; + + if (err & I2C_IRQ_SRC_SPM) + break; + + msleep(10); + } while (--retries); + + return retries ? 0 : -ETIMEDOUT; +} + +static ssize_t spm_read_block(struct i2c_client *client, loff_t offset, + void *buffer, size_t size) +{ + u8 enable = I2C_SPM_CFG_ON | I2C_SPM_CFG_READ; + int err; + + BUG_ON(size < SPM_BLOCK_SIZE); + BUG_ON((offset & 7) != 0); + + err = i2c_smbus_write_byte_data(client, I2C_SPM_CFG, enable); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(client, I2C_SPM_BASE, offset); + if (err < 0) + return err; + + err = i2c_smbus_read_i2c_block_data(client, 0, SPM_BLOCK_SIZE, buffer); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(client, I2C_SPM_CFG, I2C_SPM_CFG_OFF); + if (err < 0) + return err; + + return 0; +} + +static ssize_t spm_write_block(struct i2c_client *client, loff_t offset, + const void *buffer, size_t size) +{ + u8 enable = I2C_SPM_CFG_ON | I2C_SPM_CFG_WRITE; + int err; + + BUG_ON(size < SPM_BLOCK_SIZE); + BUG_ON((offset & 7) != 0); + + err = i2c_smbus_write_byte_data(client, I2C_SPM_CFG, enable); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(client, I2C_SPM_BASE, offset); + if (err < 0) + return err; + + err = i2c_smbus_write_i2c_block_data(client, 0, SPM_BLOCK_SIZE, buffer); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(client, I2C_SPM_CFG, I2C_SPM_CFG_OFF); + if (err < 0) + return err; + + err = spm_wait(client); + if (err < 0) + return err; + + return 0; +} + +static ssize_t sx8634_spm_load(struct sx8634 *sx) +{ + loff_t offset; + ssize_t err; + + if (sx->spm_dirty != 0) + dev_warn(&sx->client->dev, "discarding modified SPM cache\n"); + + memset(sx->spm_cache, 0, SPM_SIZE); + + for (offset = 0; offset < SPM_SIZE; offset += SPM_BLOCK_SIZE) { + err = spm_read_block(sx->client, offset, + sx->spm_cache + offset, SPM_BLOCK_SIZE); + if (err < 0) { + dev_err(&sx->client->dev, "spm_read_block(): %d\n", + err); + return err; + } + } + + sx->spm_dirty = 0; + + return 0; +} + +static ssize_t sx8634_spm_sync(struct sx8634 *sx) +{ + int bit; + + for_each_set_bit(bit, &sx->spm_dirty, SPM_NUM_BLOCKS) { + loff_t offset = bit * SPM_BLOCK_SIZE; + ssize_t err; + + err = spm_write_block(sx->client, offset, + sx->spm_cache + offset, SPM_BLOCK_SIZE); + if (err < 0) { + dev_err(&sx->client->dev, "spm_write_block(): %d\n", + err); + return err; + } + } + + sx->spm_dirty = 0; + + return 0; +} + +static int sx8634_spm_read(struct sx8634 *sx, unsigned int offset, u8 *value) +{ + if (offset >= SPM_SIZE) + return -ENXIO; + + *value = sx->spm_cache[offset]; + + return 0; +} + +static int sx8634_spm_write(struct sx8634 *sx, unsigned int offset, u8 value) +{ + if (offset >= SPM_SIZE) + return -ENXIO; + + sx->spm_dirty |= BIT(offset / SPM_BLOCK_SIZE); + sx->spm_cache[offset] = value; + + return 0; +} + +static int sx8634_reset(struct sx8634 *sx) +{ + unsigned int retries = 32; + int err; + + err = i2c_smbus_write_byte_data(sx->client, I2C_SOFT_RESET, 0xde); + if (err < 0) + return err; + + err = i2c_smbus_write_byte_data(sx->client, I2C_SOFT_RESET, 0x00); + if (err < 0) + return err; + + do { + err = i2c_smbus_read_byte_data(sx->client, I2C_IRQ_SRC); + if (err < 0) + return err; + + if (err & I2C_IRQ_SRC_READY) + break; + + msleep(10); + } while (--retries); + + return retries ? 0 : -ETIMEDOUT; +} + +static irqreturn_t sx8634_irq(int irq, void *data) +{ + struct sx8634 *sx = data; + bool need_sync = false; + u8 pending; + int err; + + err = i2c_smbus_read_byte_data(sx->client, I2C_IRQ_SRC); + if (err < 0) { + dev_err(&sx->client->dev, "failed to read IRQ source register: %d\n", err); + return IRQ_NONE; + } + + pending = err; + + if (pending & I2C_IRQ_SRC_COMPENSATION) + dev_dbg(&sx->client->dev, "compensation complete\n"); + + if (pending & I2C_IRQ_SRC_BUTTONS) { + unsigned long changed; + unsigned int cap; + u16 status; + + err = i2c_smbus_read_byte_data(sx->client, I2C_CAP_STAT_MSB); + if (err < 0) { + dev_err(&sx->client->dev, "failed to read MSB: %d\n", err); + return IRQ_NONE; + } + + status = err << 8; + + err = i2c_smbus_read_byte_data(sx->client, I2C_CAP_STAT_LSB); + if (err < 0) { + dev_err(&sx->client->dev, "failed to read LSB: %d\n", err); + return IRQ_NONE; + } + + status |= err; + + changed = status ^ sx->status; + + for_each_set_bit(cap, &changed, SX8634_NUM_CAPS) { + unsigned int level = (status & BIT(cap)) ? 1 : 0; + input_report_key(sx->input, sx->keycodes[cap], level); + need_sync = true; + } + + sx->status = status; + } + + if (pending & I2C_IRQ_SRC_SLIDER) { + u16 position; + + err = i2c_smbus_read_byte_data(sx->client, I2C_SLD_POS_MSB); + if (err < 0) { + dev_err(&sx->client->dev, "failed to read MSB: %d\n", + err); + return IRQ_NONE; + } + + position = err << 8; + + err = i2c_smbus_read_byte_data(sx->client, I2C_SLD_POS_LSB); + if (err < 0) { + dev_err(&sx->client->dev, "failed to read LSB: %d\n", + err); + return IRQ_NONE; + } + + position |= err; + + input_report_abs(sx->input, ABS_MISC, position); + } + + if (need_sync || (pending & I2C_IRQ_SRC_SLIDER)) + input_sync(sx->input); + + if (pending & I2C_IRQ_SRC_GPI) + dev_dbg(&sx->client->dev, "%s(): GPI event\n", __func__); + + if (pending & I2C_IRQ_SRC_SPM) + dev_dbg(&sx->client->dev, "%s(): SPM event\n", __func__); + + if (pending & I2C_IRQ_SRC_NVM) + dev_dbg(&sx->client->dev, "%s(): NVM event\n", __func__); + + if (pending & I2C_IRQ_SRC_READY) + dev_dbg(&sx->client->dev, "%s(): ready event\n", __func__); + + return IRQ_HANDLED; +} + +static int sx8634_set_mode(struct sx8634 *sx, unsigned int cap, enum sx8634_cap_mode mode) +{ + u8 value = 0; + int err; + + if ((cap >= SX8634_NUM_CAPS) || (mode == SX8634_CAP_MODE_RESERVED)) + return -EINVAL; + + err = sx8634_spm_read(sx, SPM_CAP_MODE(cap), &value); + if (err < 0) + return err; + + value &= ~SPM_CAP_MODE_MASK_SHIFTED(cap); + value |= (mode & SPM_CAP_MODE_MASK) << SPM_CAP_MODE_SHIFT(cap); + + err = sx8634_spm_write(sx, SPM_CAP_MODE(cap), value); + if (err < 0) + return err; + + return 0; +} + +static int sx8634_set_sensitivity(struct sx8634 *sx, unsigned int cap, + u8 sensitivity) +{ + u8 value = 0; + int err = 0; + + if (cap >= SX8634_NUM_CAPS) + return -EINVAL; + + err = sx8634_spm_read(sx, SPM_CAP_SENS(cap), &value); + if (err < 0) + return err; + + value &= ~SPM_CAP_SENS_MASK_SHIFTED(cap); + value |= (sensitivity & SPM_CAP_SENS_MASK) << SPM_CAP_SENS_SHIFT(cap); + + err = sx8634_spm_write(sx, SPM_CAP_SENS(cap), value); + if (err < 0) + return err; + + return 0; +} + +static int sx8634_set_threshold(struct sx8634 *sx, unsigned int cap, + u8 threshold) +{ + int err; + + if (cap >= SX8634_NUM_CAPS) + return -EINVAL; + + err = sx8634_spm_write(sx, SPM_CAP_THRESHOLD(cap), threshold); + if (err < 0) + return err; + + return 0; +} + +static int sx8634_setup(struct sx8634 *sx, struct sx8634_platform_data *pdata) +{ + bool slider = false; + unsigned int i; + int err; + + err = sx8634_reset(sx); + if (err < 0) + return err; + + err = sx8634_spm_load(sx); + if (err < 0) + return err; + + /* disable all capacitive sensors */ + for (i = 0; i < SX8634_NUM_CAPS; i++) { + err = sx8634_set_mode(sx, i, SX8634_CAP_MODE_DISABLED); + if (err < 0) + return err; + } + + err = sx8634_spm_sync(sx); + if (err < 0) + return err; + + err = sx8634_spm_load(sx); + if (err < 0) + return err; + + /* configure capacitive sensor parameters */ + for (i = 0; i < SX8634_NUM_CAPS; i++) { + struct sx8634_cap *cap = &pdata->caps[i]; + + err = sx8634_set_sensitivity(sx, i, cap->sensitivity); + if (err < 0) + dev_err(&sx->client->dev, "%s failed: %d\n", + "sx8634_set_sensitivity()", err); + + err = sx8634_set_threshold(sx, i, cap->threshold); + if (err < 0) + dev_err(&sx->client->dev, "%s failed: %d\n", + "sx8634_set_threshold()", err); + } + + err = sx8634_spm_sync(sx); + if (err < 0) + return err; + + err = sx8634_spm_load(sx); + if (err < 0) + return err; + + /* enable individual cap sensitivity */ + err = sx8634_spm_write(sx, SPM_CAP_MODE_MISC, 0x04); + if (err < 0) + return err; + + /* enable capacitive sensors */ + for (i = 0; i < SX8634_NUM_CAPS; i++) { + struct sx8634_cap *cap = &pdata->caps[i]; + + if (cap->mode == SX8634_CAP_MODE_BUTTON) { + input_set_capability(sx->input, EV_KEY, cap->keycode); + sx->keycodes[i] = cap->keycode; + } + + if (cap->mode == SX8634_CAP_MODE_SLIDER) { + if (slider) + sx->slider_max += SLD_POS_STEP; + + slider = true; + } + + err = sx8634_set_mode(sx, i, cap->mode); + if (err < 0) + dev_err(&sx->client->dev, "%s failed: %d\n", + "sx8634_set_mode()", err); + } + + err = sx8634_spm_sync(sx); + if (err < 0) + return err; + + sx->input->id.bustype = BUS_I2C; + sx->input->id.product = 0; + sx->input->id.version = 0; + sx->input->name = "sx8634"; + sx->input->dev.parent = &sx->client->dev; + + /* setup slider */ + if (slider) { + input_set_abs_params(sx->input, ABS_MISC, 0, sx->slider_max, + 0, 0); + input_set_capability(sx->input, EV_ABS, ABS_MISC); + } + + return 0; +} + +static ssize_t sx8634_spm_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct i2c_client *client = to_i2c_client(dev); + struct sx8634 *sx = i2c_get_clientdata(client); + ssize_t len = 0; + size_t i, j; + int err; + + err = sx8634_spm_load(sx); + if (err < 0) + return err; + + for (i = 0; i < SPM_SIZE; i += SPM_BLOCK_SIZE) { + const char *prefix = ""; + + for (j = 0; j < SPM_BLOCK_SIZE; j++) { + len += sprintf(buf + len, "%s%02x", prefix, + sx->spm_cache[i + j]); + prefix = " "; + } + + len += sprintf(buf + len, "\n"); + } + + return len; +} + +static DEVICE_ATTR(spm, 0664, sx8634_spm_show, NULL); + +static struct attribute *sx8634_attributes[] = { + &dev_attr_spm.attr, + NULL +}; + +static const struct attribute_group sx8634_attr_group = { + .attrs = sx8634_attributes, +}; + +static int sx8634_parse_dt(struct device *dev, struct sx8634_platform_data *pdata) +{ + struct device_node *node = dev->of_node; + struct device_node *child = NULL; + u32 sensitivity_def = 0x00; + u32 threshold_def = 0xa0; + int err; + + if (!node) + return -ENODEV; + + memset(pdata, 0, sizeof(*pdata)); + + err = of_property_read_u32(node, "threshold", &threshold_def); + if (err < 0) { + } + + if (threshold_def > SPM_CAP_THRESHOLD_MAX) { + dev_info(dev, "invalid threshold: %u, using %u\n", + threshold_def, SPM_CAP_THRESHOLD_MAX); + threshold_def = SPM_CAP_THRESHOLD_MAX; + } + + err = of_property_read_u32(node, "sensitivity", &sensitivity_def); + if (err < 0) { + } + + if (sensitivity_def > SPM_CAP_SENS_MAX) { + dev_info(dev, "invalid sensitivity: %u, using %u\n", + sensitivity_def, SPM_CAP_SENS_MAX); + sensitivity_def = SPM_CAP_SENS_MAX; + } + + while ((child = of_get_next_child(node, child))) { + u32 sensitivity = sensitivity_def; + u32 threshold = threshold_def; + struct sx8634_cap *cap; + u32 keycode; + u32 index; + + err = of_property_read_u32(child, "reg", &index); + if (err < 0) { + } + + if (index >= SX8634_NUM_CAPS) { + dev_err(dev, "invalid cap index: %u\n", index); + continue; + } + + cap = &pdata->caps[index]; + + err = of_property_read_u32(child, "threshold", &threshold); + if (err < 0) { + } + + cap->threshold = threshold; + + err = of_property_read_u32(child, "sensitivity", &sensitivity); + if (err < 0) { + } + + cap->sensitivity = sensitivity; + + err = of_property_read_u32(child, "linux,code", &keycode); + if (err == 0) { + cap->mode = SX8634_CAP_MODE_BUTTON; + cap->keycode = keycode; + } else { + cap->mode = SX8634_CAP_MODE_SLIDER; + } + } + + pdata->power_gpio = of_get_named_gpio(node, "power-gpios", 0); + + return 0; +} + +static int __devinit sx8634_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct sx8634_platform_data *pdata = client->dev.platform_data; + struct device_node *node = client->dev.of_node; + struct sx8634_platform_data defpdata; + struct sx8634 *sx; + int err = 0; + + if (IS_ENABLED(CONFIG_OF) && node) { + client->irq = irq_of_parse_and_map(node, 0); + if (client->irq == NO_IRQ) + return -EPROBE_DEFER; + } + + if (!pdata) { + if (!IS_ENABLED(CONFIG_OF)) + return -ENODEV; + + err = sx8634_parse_dt(&client->dev, &defpdata); + if (err < 0) + return err; + + pdata = &defpdata; + } + + sx = devm_kzalloc(&client->dev, sizeof(*sx), GFP_KERNEL); + if (!sx) + return -ENOMEM; + + sx->spm_cache = devm_kzalloc(&client->dev, SPM_SIZE, GFP_KERNEL); + if (!sx->spm_cache) + return -ENOMEM; + + sx->input = input_allocate_device(); + if (!sx->input) + return -ENOMEM; + + sx->power_gpio = pdata->power_gpio; + sx->client = client; + + if (gpio_is_valid(sx->power_gpio)) { + err = gpio_request(sx->power_gpio, "sx8634 power"); + if (err < 0) { + dev_err(&client->dev, + "failed to request power GPIO#%u: %d\n", + sx->power_gpio, err); + goto free_input_device; + } + + err = gpio_direction_output(sx->power_gpio, 1); + if (err < 0) { + dev_err(&client->dev, "failed to enable power: %d\n", + err); + goto free_power_gpio; + } + + msleep(150); + } + + err = sx8634_setup(sx, pdata); + if (err < 0) + goto free_power_gpio; + + err = sysfs_create_group(&client->dev.kobj, &sx8634_attr_group); + if (err < 0) + goto free_power_gpio; + + err = devm_request_threaded_irq(&client->dev, client->irq, NULL, + sx8634_irq, IRQF_ONESHOT, "sx8634", + sx); + if (err < 0) { + dev_err(&client->dev, "can't allocate IRQ#%d\n", client->irq); + goto remove_sysfs; + } + + /* clear interrupts */ + err = i2c_smbus_read_byte_data(client, I2C_IRQ_SRC); + if (err < 0) { + dev_err(&client->dev, "can't clear interrupts: %d\n", err); + goto remove_sysfs; + } + + err = input_register_device(sx->input); + if (err < 0) + goto remove_sysfs; + + i2c_set_clientdata(client, sx); + + return 0; + +remove_sysfs: + sysfs_remove_group(&client->dev.kobj, &sx8634_attr_group); +free_power_gpio: + if (gpio_is_valid(sx->power_gpio)) { + gpio_direction_output(sx->power_gpio, 0); + gpio_free(sx->power_gpio); + } +free_input_device: + input_free_device(sx->input); + return err; +} + +static int __devexit sx8634_i2c_remove(struct i2c_client *client) +{ + struct sx8634 *sx = i2c_get_clientdata(client); + + input_unregister_device(sx->input); + sysfs_remove_group(&client->dev.kobj, &sx8634_attr_group); + + if (gpio_is_valid(sx->power_gpio)) { + gpio_direction_output(sx->power_gpio, 0); + gpio_free(sx->power_gpio); + } + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int sx8634_i2c_suspend(struct device *dev) +{ + return 0; +} + +static int sx8634_i2c_resume(struct device *dev) +{ + return 0; +} +#endif + +static SIMPLE_DEV_PM_OPS(sx8634_i2c_pm, sx8634_i2c_suspend, sx8634_i2c_resume); + +static const struct i2c_device_id sx8634_i2c_ids[] = { + { "sx8634", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, sx8634_i2c_ids); + +#ifdef CONFIG_OF +static const struct of_device_id sx8634_of_match[] = { + { .compatible = "smtc,sx8634", }, + { }, +}; +MODULE_DEVICE_TABLE(of, sx8634_of_match); +#endif + +static struct i2c_driver sx8634_driver = { + .driver = { + .name = "sx8634", + .owner = THIS_MODULE, + .pm = &sx8634_i2c_pm, + .of_match_table = of_match_ptr(sx8634_of_match), + }, + .probe = sx8634_i2c_probe, + .remove = __devexit_p(sx8634_i2c_remove), + .id_table = sx8634_i2c_ids, +}; +module_i2c_driver(sx8634_driver); + +MODULE_AUTHOR("Thierry Reding "); +MODULE_DESCRIPTION("Semtech SX8634 Controller Driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/input/sx8634.h b/include/linux/input/sx8634.h new file mode 100644 index 0000000..9b371fe --- /dev/null +++ b/include/linux/input/sx8634.h @@ -0,0 +1,33 @@ +/* + * Copyright (C) 2011-2012 Avionic Design GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_INPUT_SX8634_H__ +#define __LINUX_INPUT_SX8634_H__ + +#define SX8634_NUM_CAPS 12 + +enum sx8634_cap_mode { + SX8634_CAP_MODE_DISABLED, + SX8634_CAP_MODE_BUTTON, + SX8634_CAP_MODE_SLIDER, + SX8634_CAP_MODE_RESERVED +}; + +struct sx8634_cap { + enum sx8634_cap_mode mode; + unsigned short keycode; + u8 sensitivity; + u8 threshold; +}; + +struct sx8634_platform_data { + struct sx8634_cap caps[SX8634_NUM_CAPS]; + int power_gpio; +}; + +#endif