new file mode 100644
@@ -0,0 +1,35 @@
+Texas Instruments - TSC / ADC multi-functional device
+
+ti_tscadc is a multi-function device with touchscreen and ADC on chip.
+This document describes the binding for mfd device.
+
+Required properties:
+- compatible: "ti,ti-tscadc"
+- reg: Specifies the address of MFD block
+- interrupts: IRQ line connected to the main SoC
+- interrupt-parent: The parent interrupt controller
+
+Optional properties:
+- ti,hwmods: Hardware information related to TSC/ADC MFD device
+
+Example:
+
+ tscadc: tscadc@44e0d000 {
+ compatible = "ti,ti-tscadc";
+ reg = <0x44e0d000 0x1000>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <16>;
+ ti,hwmods = "adc_tsc";
+
+ tsc {
+ wires = <4>;
+ x-plate-resistance = <200>;
+ steps-to-configure = <5>;
+ wire_config = <0x00 0x11 0x22 0x33>;
+ };
+
+ adc {
+ adc-channels = <4>;
+ };
+ };
@@ -22,6 +22,8 @@
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/iio/iio.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mfd/ti_am335x_tscadc.h>
#include <linux/platform_data/ti_am335x_adc.h>
@@ -141,11 +143,18 @@ static int __devinit tiadc_probe(struct platform_device *pdev)
struct iio_dev *indio_dev;
struct tiadc_device *adc_dev;
struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct mfd_tscadc_board *pdata;
+ struct mfd_tscadc_board *pdata = NULL;
+ struct device_node *node = NULL;
int err;
+ u32 val32;
- pdata = tscadc_dev->dev->platform_data;
- if (!pdata || !pdata->adc_init) {
+ if (tscadc_dev->dev->of_node) {
+ node = tscadc_dev->dev->of_node;
+ node = of_find_node_by_name(node, "adc");
+ } else
+ pdata = tscadc_dev->dev->platform_data;
+
+ if (!pdata && !node) {
dev_err(&pdev->dev, "Could not find platform data\n");
return -EINVAL;
}
@@ -159,7 +168,15 @@ static int __devinit tiadc_probe(struct platform_device *pdev)
adc_dev = iio_priv(indio_dev);
adc_dev->mfd_tscadc = tscadc_dev;
- adc_dev->channels = pdata->adc_init->adc_channels;
+
+ if (node) {
+ err = of_property_read_u32(node, "adc-channels", &val32);
+ if (err < 0)
+ goto err_free_device;
+ else
+ adc_dev->channels = val32;
+ } else
+ adc_dev->channels = pdata->adc_init->adc_channels;
indio_dev->dev.parent = &pdev->dev;
indio_dev->name = dev_name(&pdev->dev);
@@ -28,6 +28,8 @@
#include <linux/delay.h>
#include <linux/mfd/ti_am335x_tscadc.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#define ADCFSM_STEPID 0x10
#define SEQ_SETTLE 275
@@ -398,12 +400,19 @@ static int __devinit titsc_probe(struct platform_device *pdev)
struct titsc *ts_dev;
struct input_dev *input_dev;
struct ti_tscadc_dev *tscadc_dev = pdev->dev.platform_data;
- struct mfd_tscadc_board *pdata;
- int err;
-
- pdata = tscadc_dev->dev->platform_data;
-
- if (!pdata) {
+ int err, i;
+ struct mfd_tscadc_board *pdata = NULL;
+ struct device_node *node = NULL;
+ u32 val32;
+ u32 wires_conf[4];
+
+ if (tscadc_dev->dev->of_node) {
+ node = tscadc_dev->dev->of_node;
+ node = of_find_node_by_name(node, "tsc");
+ } else
+ pdata = tscadc_dev->dev->platform_data;
+
+ if (!pdata && !node) {
dev_err(&pdev->dev, "Could not find platform data\n");
return -EINVAL;
}
@@ -421,11 +430,43 @@ static int __devinit titsc_probe(struct platform_device *pdev)
ts_dev->mfd_tscadc = tscadc_dev;
ts_dev->input = input_dev;
ts_dev->irq = tscadc_dev->irq;
- ts_dev->wires = pdata->tsc_init->wires;
- ts_dev->x_plate_resistance = pdata->tsc_init->x_plate_resistance;
- ts_dev->steps_to_configure = pdata->tsc_init->steps_to_configure;
- memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config,
+
+ if (node) {
+ err = of_property_read_u32(node, "wires", &val32);
+ if (err < 0)
+ goto err_free_mem;
+ else
+ ts_dev->wires = val32;
+
+ err = of_property_read_u32(node, "x-plate-resistance", &val32);
+ if (err < 0)
+ goto err_free_mem;
+ else
+ ts_dev->x_plate_resistance = val32;
+
+ err = of_property_read_u32(node, "steps-to-configure", &val32);
+ if (err < 0)
+ goto err_free_mem;
+ else
+ ts_dev->steps_to_configure = val32;
+
+ err = of_property_read_u32_array(node, "wire_config",
+ wires_conf, ARRAY_SIZE(wires_conf));
+ if (err < 0)
+ goto err_free_mem;
+ else {
+ for (i = 0; i < ARRAY_SIZE(wires_conf); i++)
+ ts_dev->config_inp[i] = wires_conf[i];
+ }
+ } else {
+ ts_dev->wires = pdata->tsc_init->wires;
+ ts_dev->x_plate_resistance =
+ pdata->tsc_init->x_plate_resistance;
+ ts_dev->steps_to_configure =
+ pdata->tsc_init->steps_to_configure;
+ memcpy(ts_dev->config_inp, pdata->tsc_init->wire_config,
sizeof(pdata->tsc_init->wire_config));
+ }
err = request_irq(ts_dev->irq, titsc_irq,
0, pdev->dev.driver->name, ts_dev);
@@ -445,7 +486,6 @@ static int __devinit titsc_probe(struct platform_device *pdev)
input_dev->name = "ti-tsc";
input_dev->dev.parent = &pdev->dev;
-
input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
@@ -26,6 +26,8 @@
#include <linux/mfd/ti_am335x_tscadc.h>
#include <linux/input/ti_am335x_tsc.h>
#include <linux/platform_data/ti_am335x_adc.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
static unsigned int tscadc_readl(struct ti_tscadc_dev *tsadc, unsigned int reg)
{
@@ -64,21 +66,32 @@ static int __devinit ti_tscadc_probe(struct platform_device *pdev)
struct resource *res;
struct clk *clk;
struct mfd_tscadc_board *pdata = pdev->dev.platform_data;
+ struct device_node *node = pdev->dev.of_node;
struct mfd_cell *cell;
int irq;
int err, ctrl;
int clk_value, clock_rate;
- int tsc_wires, adc_channels = 0, total_channels;
+ int tsc_wires = 0, adc_channels = 0, total_channels;
- if (!pdata) {
+ if (!pdata && !pdev->dev.of_node) {
dev_err(&pdev->dev, "Could not find platform data\n");
return -EINVAL;
}
- if (pdata->adc_init)
- adc_channels = pdata->adc_init->adc_channels;
+ if (pdev->dev.of_node) {
+ node = of_find_node_by_name(pdev->dev.of_node, "tsc");
+ of_property_read_u32(node, "wires", &tsc_wires);
+
+ node = of_find_node_by_name(pdev->dev.of_node, "adc");
+ of_property_read_u32(node, "adc-channels", &adc_channels);
+ } else {
+ if (pdata->tsc_init)
+ tsc_wires = pdata->tsc_init->wires;
+
+ if (pdata->adc_init)
+ adc_channels = pdata->adc_init->adc_channels;
+ }
- tsc_wires = pdata->tsc_init->wires;
total_channels = tsc_wires + adc_channels;
if (total_channels > 8) {
@@ -259,11 +272,16 @@ static const struct dev_pm_ops tscadc_pm_ops = {
#define TSCADC_PM_OPS NULL
#endif
+static const struct of_device_id ti_tscadc_dt_ids[] = {
+ { .compatible = "ti,ti-tscadc", },
+};
+
static struct platform_driver ti_tscadc_driver = {
.driver = {
.name = "ti_tscadc",
.owner = THIS_MODULE,
.pm = TSCADC_PM_OPS,
+ .of_match_table = of_match_ptr(ti_tscadc_dt_ids),
},
.probe = ti_tscadc_probe,
.remove = __devexit_p(ti_tscadc_remove),
Add DT binding for TI's touchscreen / ADC multifunctional driver. Usage details are added to device tree documentation and the driver was tested on AM335x EVM. This patch is based on top of [1]. [1] "Subject: [PATCH 0/3] input: ti_am335x_tsc: Remove hard coded values and add variance filter logic" (http://www.spinics.net/lists/linux-input/msg23060.html) Signed-off-by: Patil, Rachna <rachna@ti.com> --- .../devicetree/bindings/mfd/ti_am335x_tscadc.txt | 35 +++++++++++ drivers/iio/adc/ti_am335x_adc.c | 25 +++++++- drivers/input/touchscreen/ti_am335x_tsc.c | 62 ++++++++++++++++---- drivers/mfd/ti_am335x_tscadc.c | 28 +++++++-- 4 files changed, 130 insertions(+), 20 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/ti_am335x_tscadc.txt