diff mbox

[2/2] ARM: OMAP: ads7846: fix pendown debounce setting

Message ID 1353341038-14381-3-git-send-email-grinberg@compulab.co.il (mailing list archive)
State New, archived
Headers show

Commit Message

Igor Grinberg Nov. 19, 2012, 4:03 p.m. UTC
Commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code) have enabled the
pendown GPIO debounce time setting by the below sequence:

  gpio_request_one()
  gpio_set_debounce()
  gpio_free()

It also revealed a bug in the OMAP GPIO handling code which prevented
the GPIO debounce clock to be disabled and CORE transition to low power
states.

Commit c9c55d9 (gpio/omap: fix off-mode bug: clear debounce settings on
free/reset) fixes the OMAP GPIO handling code by making sure that the
GPIO debounce clock gets disabled if no GPIO is requested from current
bank.

While fixing the OMAP GPIO handling code (in the right way), the above
commit makes the gpio_request->set_debounce->free sequence invalid as
after freeing the GPIO, the debounce settings are lost.

Fix the debounce settings by moving the debounce initialization to the
actual GPIO requesting code - the ads7846 driver.

Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
Cc: Kevin Hilman <khilman@ti.com>
Cc: Zumeng Chen <zumeng.chen@windriver.com>
---
 arch/arm/mach-omap2/common-board-devices.c |   34 ++++++++++++++++-----------
 1 files changed, 20 insertions(+), 14 deletions(-)

Comments

Tony Lindgren Nov. 21, 2012, 7:08 p.m. UTC | #1
* Igor Grinberg <grinberg@compulab.co.il> [121119 08:06]:
> Commit 97ee9f01 (ARM: OMAP: fix the ads7846 init code) have enabled the
> pendown GPIO debounce time setting by the below sequence:
> 
>   gpio_request_one()
>   gpio_set_debounce()
>   gpio_free()
> 
> It also revealed a bug in the OMAP GPIO handling code which prevented
> the GPIO debounce clock to be disabled and CORE transition to low power
> states.
> 
> Commit c9c55d9 (gpio/omap: fix off-mode bug: clear debounce settings on
> free/reset) fixes the OMAP GPIO handling code by making sure that the
> GPIO debounce clock gets disabled if no GPIO is requested from current
> bank.
> 
> While fixing the OMAP GPIO handling code (in the right way), the above
> commit makes the gpio_request->set_debounce->free sequence invalid as
> after freeing the GPIO, the debounce settings are lost.
> 
> Fix the debounce settings by moving the debounce initialization to the
> actual GPIO requesting code - the ads7846 driver.
> 
> Signed-off-by: Igor Grinberg <grinberg@compulab.co.il>
> Cc: Kevin Hilman <khilman@ti.com>
> Cc: Zumeng Chen <zumeng.chen@windriver.com>

Acked-by: Tony Lindgren <tony@atomide.com>

> ---
>  arch/arm/mach-omap2/common-board-devices.c |   34 ++++++++++++++++-----------
>  1 files changed, 20 insertions(+), 14 deletions(-)
> 
> diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
> index ad85609..d246efd 100644
> --- a/arch/arm/mach-omap2/common-board-devices.c
> +++ b/arch/arm/mach-omap2/common-board-devices.c
> @@ -63,30 +63,36 @@ void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
>  	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
>  	int err;
>  
> -	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
> -	if (err) {
> -		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
> -		return;
> -	}
> +	/*
> +	 * If a board defines get_pendown_state() function, request the pendown
> +	 * GPIO and set the GPIO debounce time.
> +	 * If a board does not define the get_pendown_state() function, then
> +	 * the ads7846 driver will setup the pendown GPIO itself.
> +	 */
> +	if (board_pdata && board_pdata->get_pendown_state) {
> +		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
> +		if (err) {
> +			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
> +			return;
> +		}
> +
> +		if (gpio_debounce)
> +			gpio_set_debounce(gpio_pendown, gpio_debounce);
>  
> -	if (gpio_debounce)
> -		gpio_set_debounce(gpio_pendown, gpio_debounce);
> +		gpio_export(gpio_pendown, 0);
> +	}
>  
>  	spi_bi->bus_num	= bus_num;
>  	spi_bi->irq	= gpio_to_irq(gpio_pendown);
>  
> +	ads7846_config.gpio_pendown = gpio_pendown;
> +
>  	if (board_pdata) {
>  		board_pdata->gpio_pendown = gpio_pendown;
> +		board_pdata->gpio_pendown_debounce = gpio_debounce;
>  		spi_bi->platform_data = board_pdata;
> -		if (board_pdata->get_pendown_state)
> -			gpio_export(gpio_pendown, 0);
> -	} else {
> -		ads7846_config.gpio_pendown = gpio_pendown;
>  	}
>  
> -	if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
> -		gpio_free(gpio_pendown);
> -
>  	spi_register_board_info(&ads7846_spi_board_info, 1);
>  }
>  #else
> -- 
> 1.7.3.4
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm/mach-omap2/common-board-devices.c b/arch/arm/mach-omap2/common-board-devices.c
index ad85609..d246efd 100644
--- a/arch/arm/mach-omap2/common-board-devices.c
+++ b/arch/arm/mach-omap2/common-board-devices.c
@@ -63,30 +63,36 @@  void __init omap_ads7846_init(int bus_num, int gpio_pendown, int gpio_debounce,
 	struct spi_board_info *spi_bi = &ads7846_spi_board_info;
 	int err;
 
-	err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
-	if (err) {
-		pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
-		return;
-	}
+	/*
+	 * If a board defines get_pendown_state() function, request the pendown
+	 * GPIO and set the GPIO debounce time.
+	 * If a board does not define the get_pendown_state() function, then
+	 * the ads7846 driver will setup the pendown GPIO itself.
+	 */
+	if (board_pdata && board_pdata->get_pendown_state) {
+		err = gpio_request_one(gpio_pendown, GPIOF_IN, "TSPenDown");
+		if (err) {
+			pr_err("Couldn't obtain gpio for TSPenDown: %d\n", err);
+			return;
+		}
+
+		if (gpio_debounce)
+			gpio_set_debounce(gpio_pendown, gpio_debounce);
 
-	if (gpio_debounce)
-		gpio_set_debounce(gpio_pendown, gpio_debounce);
+		gpio_export(gpio_pendown, 0);
+	}
 
 	spi_bi->bus_num	= bus_num;
 	spi_bi->irq	= gpio_to_irq(gpio_pendown);
 
+	ads7846_config.gpio_pendown = gpio_pendown;
+
 	if (board_pdata) {
 		board_pdata->gpio_pendown = gpio_pendown;
+		board_pdata->gpio_pendown_debounce = gpio_debounce;
 		spi_bi->platform_data = board_pdata;
-		if (board_pdata->get_pendown_state)
-			gpio_export(gpio_pendown, 0);
-	} else {
-		ads7846_config.gpio_pendown = gpio_pendown;
 	}
 
-	if (!board_pdata || (board_pdata && !board_pdata->get_pendown_state))
-		gpio_free(gpio_pendown);
-
 	spi_register_board_info(&ads7846_spi_board_info, 1);
 }
 #else