@@ -743,6 +743,14 @@ config HID_WIIMOTE
To compile this driver as a module, choose M here: the
module will be called hid-wiimote.
+config HID_XINMO
+ tristate "Xin-Mo non-fully compliant devices"
+ depends on HID
+ ---help---
+ Support for Xin-Mo devices that are not fully compliant with the HID
+ standard. Currently only supports the Xin-Mo Dual Arcade. Say Y here
+ if you have a Xin-Mo Dual Arcade controller.
+
config HID_ZEROPLUS
tristate "Zeroplus based game controller support"
depends on HID
@@ -110,6 +110,7 @@ obj-$(CONFIG_HID_TIVO) += hid-tivo.o
obj-$(CONFIG_HID_TOPSEED) += hid-topseed.o
obj-$(CONFIG_HID_TWINHAN) += hid-twinhan.o
obj-$(CONFIG_HID_UCLOGIC) += hid-uclogic.o
+obj-$(CONFIG_HID_XINMO) += hid-xinmo.o
obj-$(CONFIG_HID_ZEROPLUS) += hid-zpff.o
obj-$(CONFIG_HID_ZYDACRON) += hid-zydacron.o
obj-$(CONFIG_HID_WACOM) += hid-wacom.o
@@ -1736,6 +1736,7 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_MEDIA_TABLET_14_1_INCH) },
{ HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SIRIUS_BATTERY_FREE_TABLET) },
{ HID_USB_DEVICE(USB_VENDOR_ID_X_TENSIONS, USB_DEVICE_ID_SPEEDLINK_VAD_CEZANNE) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0005) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZEROPLUS, 0x0030) },
{ HID_USB_DEVICE(USB_VENDOR_ID_ZYDACRON, USB_DEVICE_ID_ZYDACRON_REMOTE_CONTROL) },
@@ -887,6 +887,9 @@
#define USB_VENDOR_ID_XAT 0x2505
#define USB_DEVICE_ID_XAT_CSR 0x0220
+#define USB_VENDOR_ID_XIN_MO 0x16c0
+#define USB_DEVICE_ID_XIN_MO_DUAL_ARCADE 0x05e1
+
#define USB_VENDOR_ID_XIROKU 0x1477
#define USB_DEVICE_ID_XIROKU_SPX 0x1006
#define USB_DEVICE_ID_XIROKU_MPX 0x1007
new file mode 100644
@@ -0,0 +1,72 @@
+/*
+ * HID driver for Xin-Mo devices, currently only the Dual Arcade controller.
+ * Fixes the negative axis event values (the devices sends -2) to match the
+ * logical axis minimum of the HID report descriptor (the report announces
+ * -1). It is needed because hid-input discards out of bounds values.
+ * (This module is based on "hid-saitek" and "hid-lg".)
+ *
+ * Copyright (c) 2013 Olivier Scherler
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/device.h>
+#include <linux/hid.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+
+#include "hid-ids.h"
+
+/*
+ * Fix negative events that are out of bounds.
+ */
+static int xinmo_event(struct hid_device *hdev, struct hid_field *field,
+ struct hid_usage *usage, __s32 value)
+{
+ switch (usage->code) {
+ case ABS_X:
+ case ABS_Y:
+ case ABS_Z:
+ case ABS_RX:
+ if (value < -1) {
+ input_event(field->hidinput->input, usage->type,
+ usage->code, -1);
+ return 1;
+ }
+ break;
+ }
+
+ return 0;
+}
+
+static const struct hid_device_id xinmo_devices[] = {
+ { HID_USB_DEVICE(USB_VENDOR_ID_XIN_MO, USB_DEVICE_ID_XIN_MO_DUAL_ARCADE) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(hid, xinmo_devices);
+
+static struct hid_driver xinmo_driver = {
+ .name = "xinmo",
+ .id_table = xinmo_devices,
+ .event = xinmo_event
+};
+
+static int __init xinmo_init(void)
+{
+ return hid_register_driver(&xinmo_driver);
+}
+
+static void __exit xinmo_exit(void)
+{
+ hid_unregister_driver(&xinmo_driver);
+}
+
+module_init(xinmo_init);
+module_exit(xinmo_exit);
+MODULE_LICENSE("GPL");