diff mbox

[4/5] HID:hid-lg4ff: Initialize device properties before we touch autocentering.

Message ID 1383766244-2336-4-git-send-email-simon@mungewell.org
State New, archived
Delegated to: Jiri Kosina
Headers show

Commit Message

simon@mungewell.org Nov. 6, 2013, 7:30 p.m. UTC
Re-arrange code slightly to ensure that device properties are configured
before calling auto-center command.

Reported-by: Michal MalĂ˝ <madcatxster@prifuk.cz>
Signed-off-by: Simon Wood <simon@mungewell.org>
---
 drivers/hid/hid-lg4ff.c | 22 +++++++++++-----------
 1 file changed, 11 insertions(+), 11 deletions(-)
diff mbox

Patch

diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index 5d140b7..5492809 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -589,17 +589,6 @@  int lg4ff_init(struct hid_device *hid)
 	if (error)
 		return error;
 
-	/* Check if autocentering is available and
-	 * set the centering force to zero by default */
-	if (test_bit(FF_AUTOCENTER, dev->ffbit)) {
-		if (rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN)	/* Formula Force EX expects different autocentering command */
-			dev->ff->set_autocenter = hid_lg4ff_set_autocenter_ffex;
-		else
-			dev->ff->set_autocenter = hid_lg4ff_set_autocenter_default;
-
-		dev->ff->set_autocenter(dev, 0);
-	}
-
 	/* Get private driver data */
 	drv_data = hid_get_drvdata(hid);
 	if (!drv_data) {
@@ -620,6 +609,17 @@  int lg4ff_init(struct hid_device *hid)
 	entry->max_range = lg4ff_devices[i].max_range;
 	entry->set_range = lg4ff_devices[i].set_range;
 
+	/* Check if autocentering is available and
+	 * set the centering force to zero by default */
+	if (test_bit(FF_AUTOCENTER, dev->ffbit)) {
+		if (rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN)	/* Formula Force EX expects different autocentering command */
+			dev->ff->set_autocenter = hid_lg4ff_set_autocenter_ffex;
+		else
+			dev->ff->set_autocenter = hid_lg4ff_set_autocenter_default;
+
+		dev->ff->set_autocenter(dev, 0);
+	}
+
 	/* Create sysfs interface */
 	error = device_create_file(&hid->dev, &dev_attr_range);
 	if (error)