From patchwork Thu Jan 16 08:02:18 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Lothar_Wa=C3=9Fmann?= X-Patchwork-Id: 3497461 Return-Path: X-Original-To: patchwork-linux-input@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id EF6049F2E9 for ; Thu, 16 Jan 2014 08:03:49 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 7BC7D200E9 for ; Thu, 16 Jan 2014 08:03:48 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 3C0EF201BA for ; Thu, 16 Jan 2014 08:03:47 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751540AbaAPIDK (ORCPT ); Thu, 16 Jan 2014 03:03:10 -0500 Received: from mail.karo-electronics.de ([81.173.242.67]:55899 "EHLO mail.karo-electronics.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751265AbaAPIC3 (ORCPT ); Thu, 16 Jan 2014 03:02:29 -0500 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= To: linux-input@vger.kernel.org, Simon Budig , Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Rob Landley , Dmitry Torokhov , Thierry Reding , Grant Likely , Jonathan Cameron , Shawn Guo , Silvio F , Guennadi Liakhovetski , Jingoo Han , Fugang Duan , Sachin Kamat , devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org Cc: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Subject: [PATCHv2 3/3] Input: edt-ft5x06: Add DT support Date: Thu, 16 Jan 2014 09:02:18 +0100 Message-Id: <1389859338-11685-4-git-send-email-LW@KARO-electronics.de> X-Mailer: git-send-email 1.7.2.5 In-Reply-To: <1389859338-11685-1-git-send-email-LW@KARO-electronics.de> References: <1389859338-11685-1-git-send-email-LW@KARO-electronics.de> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Spam-Status: No, score=-7.2 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Signed-off-by: Lothar Waßmann --- .../bindings/input/touchscreen/edt-ft5x06.txt | 29 +++++ drivers/input/touchscreen/edt-ft5x06.c | 121 +++++++++++++++++--- 2 files changed, 132 insertions(+), 18 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt new file mode 100644 index 0000000..8d94cdc --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -0,0 +1,29 @@ +* EDT FT5x06 Multiple Touch Controller + +Required properties: +- compatible: must be "edt,ft5x06" +- reg: i2c slave address +- interrupt-parent: the phandle for the interrupt controller +- interrupts: touch controller interrupt + +Optional properties: +- reset-gpios: the gpio pin to be used for resetting the controller +- wake-gpios: the gpio pin to be used for waking up the controller + + The following properties provide default values for the + corresponding parameters (see Documentation/input/edt-ft5x06.txt) +- edt,threshold: allows setting the "click"-threshold in the range from 20 to 80. +- edt,gain: sensitivity (0..31) (lower value -> higher sensitivity) +- edt,offset: edge compensation (0..31) +- edt,report-rate: report rate (3..14) + +Example: + + edt_ft5x06@38 { + compatible = "edt,ft5x06"; + reg = <0x38>; + interrupt-parent = <&gpio2>; + interrupts = <5 0>; + reset-gpios = <&gpio2 6 1>; + wake-gpios = <&gpio4 9 0>; + }; diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index acb6b9f..0467591 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -33,6 +33,7 @@ #include #include #include +#include #include #include @@ -65,6 +66,10 @@ struct edt_ft5x06_ts_data { u16 num_x; u16 num_y; + int reset_pin; + int irq_pin; + int wake_pin; + #if defined(CONFIG_DEBUG_FS) struct dentry *debug_dir; u8 *raw_buffer; @@ -617,25 +622,38 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata) static int edt_ft5x06_ts_reset(struct i2c_client *client, - int reset_pin) + struct edt_ft5x06_ts_data *tsdata) { int error; - if (gpio_is_valid(reset_pin)) { + if (gpio_is_valid(tsdata->wake_pin)) { + error = devm_gpio_request_one(&client->dev, tsdata->wake_pin, + GPIOF_OUT_INIT_LOW, "edt-ft5x06 wake"); + if (error) { + dev_err(&client->dev, + "Failed to request GPIO %d as wake pin, error %d\n", + tsdata->wake_pin, error); + return error; + } + + mdelay(5); + gpio_set_value(tsdata->wake_pin, 1); + } + if (gpio_is_valid(tsdata->reset_pin)) { /* this pulls reset down, enabling the low active reset */ - error = devm_gpio_request_one(&client->dev, reset_pin, + error = devm_gpio_request_one(&client->dev, tsdata->reset_pin, GPIOF_OUT_INIT_LOW, "edt-ft5x06 reset"); if (error) { dev_err(&client->dev, "Failed to request GPIO %d as reset pin, error %d\n", - reset_pin, error); + tsdata->reset_pin, error); return error; } - mdelay(50); - gpio_set_value(reset_pin, 1); - mdelay(100); + mdelay(5); + gpio_set_value(tsdata->reset_pin, 1); + mdelay(300); } return 0; @@ -675,6 +693,29 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, pdata->name <= edt_ft5x06_attr_##name.limit_high) \ edt_ft5x06_register_write(tsdata, reg, pdata->name) +#define EDT_GET_PROP(name, var, reg) { \ + u32 val; \ + if (of_property_read_u32(np, name, &val) == 0) { \ + if (val >= edt_ft5x06_attr_##var.limit_low && \ + val <= edt_ft5x06_attr_##var.limit_high) \ + edt_ft5x06_register_write(tsdata, reg, val); \ + else \ + pr_err("edt_ft5x06: property %s (%u) is out of range: %u..%u", \ + name, val, edt_ft5x06_attr_##var.limit_low, \ + edt_ft5x06_attr_##var.limit_high); \ + } \ +} + +static void edt_ft5x06_ts_get_dt_defaults(struct device_node *np, + struct edt_ft5x06_ts_data *tsdata) +{ + /* pick up defaults from the DT data */ + EDT_GET_PROP("edt,threshold", threshold, WORK_REGISTER_THRESHOLD); + EDT_GET_PROP("edt,gain", gain, WORK_REGISTER_GAIN); + EDT_GET_PROP("edt,offset", offset, WORK_REGISTER_OFFSET); + EDT_GET_PROP("edt,report-rate", report_rate, WORK_REGISTER_REPORT_RATE); +} + static void edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata, const struct edt_ft5x06_platform_data *pdata) @@ -702,6 +743,33 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata) tsdata->num_y = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_Y); } +#ifdef CONFIG_OF +static int edt_ft5x06_i2c_ts_probe_dt(struct device *dev, + struct edt_ft5x06_ts_data *tsdata) +{ + struct device_node *np = dev->of_node; + + if (!np) + return -ENODEV; + + /* + * irq_pin is not needed for DT setup. + * irq is associated via 'interrupts' property in DT + */ + tsdata->irq_pin = -EINVAL; + tsdata->reset_pin = of_get_named_gpio(np, "reset-gpios", 0); + tsdata->wake_pin = of_get_named_gpio(np, "wake-gpios", 0); + + return 0; +} +#else +static inline int edt_ft5x06_i2c_ts_probe_dt(struct device *dev, + struct edt_ft5x06_i2c_ts_data *tsdata) +{ + return -ENODEV; +} +#endif + static int edt_ft5x06_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -714,27 +782,40 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n"); + tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL); + if (!tsdata) { + dev_err(&client->dev, "failed to allocate driver data.\n"); + return -ENOMEM; + } + if (!pdata) { - dev_err(&client->dev, "no platform data?\n"); - return -EINVAL; + error = edt_ft5x06_i2c_ts_probe_dt(&client->dev, tsdata); + if (error) { + dev_err(&client->dev, + "DT probe failed and no platform data present\n"); + return error; + } + } else { + tsdata->reset_pin = pdata->reset_pin; + tsdata->irq_pin = pdata->irq_pin; + tsdata->wake_pin = -EINVAL; } - error = edt_ft5x06_ts_reset(client, pdata->reset_pin); + error = edt_ft5x06_ts_reset(client, tsdata); if (error) return error; - if (gpio_is_valid(pdata->irq_pin)) { - error = devm_gpio_request_one(&client->dev, pdata->irq_pin, - GPIOF_IN, "edt-ft5x06 irq"); + if (gpio_is_valid(tsdata->irq_pin)) { + error = devm_gpio_request_one(&client->dev, tsdata->irq_pin, + GPIOF_IN, "edt-ft5x06 irq"); if (error) { dev_err(&client->dev, "Failed to request GPIO %d, error %d\n", - pdata->irq_pin, error); + tsdata->irq_pin, error); return error; } } - tsdata = kzalloc(sizeof(*tsdata), GFP_KERNEL); input = devm_input_allocate_device(&client->dev); if (!input) { dev_err(&client->dev, "failed to allocate input device.\n"); @@ -752,7 +833,11 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, return error; } - edt_ft5x06_ts_get_defaults(tsdata, pdata); + if (!pdata) + edt_ft5x06_ts_get_dt_defaults(client->dev.of_node, tsdata); + else + edt_ft5x06_ts_get_defaults(tsdata, pdata); + edt_ft5x06_ts_get_parameters(tsdata); dev_dbg(&client->dev, @@ -805,8 +890,8 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, device_init_wakeup(&client->dev, 1); dev_dbg(&client->dev, - "EDT FT5x06 initialized: IRQ pin %d, Reset pin %d.\n", - pdata->irq_pin, pdata->reset_pin); + "EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n", + client->irq, tsdata->wake_pin, tsdata->reset_pin); return 0; }