diff mbox

[2/5] ARM: STi: DT: add keyscan for stih415

Message ID 1393990772-9567-3-git-send-email-gabriel.fernandez@st.com (mailing list archive)
State New, archived
Headers show

Commit Message

Gabriel FERNANDEZ March 5, 2014, 3:39 a.m. UTC
From: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>

Add keyscan support for stih415.
It is put disabled by default because it is not enabled on all boards
Also there are PIOs conflict with already claimed lines.

Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
---
 arch/arm/boot/dts/stih415-pinctrl.dtsi | 16 ++++++++++++++++
 arch/arm/boot/dts/stih415.dtsi         | 10 ++++++++++
 2 files changed, 26 insertions(+)

Comments

Lee Jones March 10, 2014, 11:50 a.m. UTC | #1
> From: Giuseppe CONDORELLI <giuseppe.condorelli@st.com>
> 
> Add keyscan support for stih415.
> It is put disabled by default because it is not enabled on all boards
> Also there are PIOs conflict with already claimed lines.
> 
> Signed-off-by: Giuseppe Condorelli <giuseppe.condorelli@st.com>
> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com>
> ---
>  arch/arm/boot/dts/stih415-pinctrl.dtsi | 16 ++++++++++++++++
>  arch/arm/boot/dts/stih415.dtsi         | 10 ++++++++++
>  2 files changed, 26 insertions(+)

<snip>

> +		keyscan: keyscan@fe4b0000 {
> +			compatible = "st,keypad";
> +			status = "disabled";
> +			reg = <0xfe4b0000 0x2000>;
> +			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
> +			clocks	= <&CLK_SYSIN>;
> +			pinctrl-names	= "default";

Small nit here, but otherwise:
  Acked-by: Lee Jones <lee.jones@linaro.org>

> +			pinctrl-0 = <&pinctrl_keyscan>;
> +		};
>  	};
>  };
diff mbox

Patch

diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi
index e56449d..731e4b1 100644
--- a/arch/arm/boot/dts/stih415-pinctrl.dtsi
+++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi
@@ -87,6 +87,22 @@ 
 				};
 			};
 
+			keyscan {
+				pinctrl_keyscan: keyscan {
+					st,pins {
+						keyin0  = <&PIO0 2 ALT2 IN>;
+						keyin1  = <&PIO0 3 ALT2 IN>;
+						keyin2  = <&PIO0 4 ALT2 IN>;
+						keyin3  = <&PIO2 6 ALT2 IN>;
+
+						keyout0 = <&PIO1 6 ALT2 OUT>;
+						keyout1 = <&PIO1 7 ALT2 OUT>;
+						keyout2 = <&PIO0 6 ALT2 OUT>;
+						keyout3 = <&PIO2 7 ALT2 OUT>;
+					};
+				};
+			};
+
 			sbc_i2c0 {
 				pinctrl_sbc_i2c0_default: sbc_i2c0-default {
 					st,pins {
diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi
index d9c7dd1..5930467 100644
--- a/arch/arm/boot/dts/stih415.dtsi
+++ b/arch/arm/boot/dts/stih415.dtsi
@@ -136,5 +136,15 @@ 
 
 			status		= "disabled";
 		};
+
+		keyscan: keyscan@fe4b0000 {
+			compatible = "st,keypad";
+			status = "disabled";
+			reg = <0xfe4b0000 0x2000>;
+			interrupts = <GIC_SPI 212 IRQ_TYPE_NONE>;
+			clocks	= <&CLK_SYSIN>;
+			pinctrl-names	= "default";
+			pinctrl-0 = <&pinctrl_keyscan>;
+		};
 	};
 };