@@ -63,3 +63,15 @@ config RMI4_F11_PEN
If your system is not recognizing pen touches and you know your
sensor supports pen input, you probably want to turn this feature
off.
+
+config RMI4_F30
+ tristate "RMI4 Function 30 (GPIO LED)"
+ depends on RMI4_CORE
+ help
+ Say Y here if you want to add support for RMI4 function 30.
+
+ Function 30 provides GPIO and LED support for RMI4 devices. This
+ includes support for buttons on TouchPads and ClickPads.
+
+ To compile this driver as a module, choose M here: the
+ module will be called rmi-f30.
@@ -3,6 +3,7 @@ rmi_core-y := rmi_bus.o rmi_driver.o rmi_f01.o
# Function drivers
obj-$(CONFIG_RMI4_F11) += rmi_f11.o
+obj-$(CONFIG_RMI4_F30) += rmi_f30.o
# Transports
obj-$(CONFIG_RMI4_I2C) += rmi_i2c.o
new file mode 100644
@@ -0,0 +1,399 @@
+/*
+ * Copyright (c) 2012 - 2014 Synaptics Incorporated
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/rmi.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include "rmi_driver.h"
+
+#define RMI_F30_QUERY_SIZE 2
+
+/* Defs for Query 0 */
+#define RMI_F30_EXTENDED_PATTERNS 0x01
+#define RMI_F30_HAS_MAPPABLE_BUTTONS (1 << 1)
+#define RMI_F30_HAS_LED (1 << 2)
+#define RMI_F30_HAS_GPIO (1 << 3)
+#define RMI_F30_HAS_HAPTIC (1 << 4)
+#define RMI_F30_HAS_GPIO_DRV_CTL (1 << 5)
+#define RMI_F30_HAS_MECH_MOUSE_BTNS (1 << 6)
+
+/* Defs for Query 1 */
+#define RMI_F30_GPIO_LED_COUNT 0x1F
+
+/* Defs for Control Registers */
+#define RMI_F30_CTRL_1_GPIO_DEBOUNCE 0x01
+#define RMI_F30_CTRL_1_HALT (1 << 4)
+#define RMI_F30_CTRL_1_HALTED (1 << 5)
+#define RMI_F30_CTRL_10_NUM_MECH_MOUSE_BTNS 0x03
+
+struct rmi_f30_ctrl_data {
+ int address;
+ int length;
+ u8 *regs;
+};
+
+#define RMI_F30_CTRL_MAX_REGS 32
+#define RMI_F30_CTRL_MAX_BYTES ((RMI_F30_CTRL_MAX_REGS + 7) >> 3)
+#define RMI_F30_CTRL_MAX_REG_BLOCKS 11
+
+#define RMI_F30_CTRL_REGS_MAX_SIZE (RMI_F30_CTRL_MAX_BYTES \
+ + 1 \
+ + RMI_F30_CTRL_MAX_BYTES \
+ + RMI_F30_CTRL_MAX_BYTES \
+ + RMI_F30_CTRL_MAX_BYTES \
+ + 6 \
+ + RMI_F30_CTRL_MAX_REGS \
+ + RMI_F30_CTRL_MAX_REGS \
+ + RMI_F30_CTRL_MAX_BYTES \
+ + 1 \
+ + 1)
+
+struct f30_data {
+ /* Query Data */
+ bool has_extended_pattern;
+ bool has_mappable_buttons;
+ bool has_led;
+ bool has_gpio;
+ bool has_haptic;
+ bool has_gpio_driver_control;
+ bool has_mech_mouse_btns;
+ u8 gpioled_count;
+
+ u8 register_count;
+
+ /* Control Register Data */
+ struct rmi_f30_ctrl_data ctrl[RMI_F30_CTRL_MAX_REG_BLOCKS];
+ u8 ctrl_regs[RMI_F30_CTRL_REGS_MAX_SIZE];
+ u32 ctrl_regs_size;
+
+ u8 data_regs[RMI_F30_CTRL_MAX_BYTES];
+ u16 *gpioled_key_map;
+ u8 *gpioled_sense_map;
+
+ char input_phys[NAME_BUFFER_SIZE];
+ struct input_dev *input;
+};
+
+static int rmi_f30_read_control_parameters(struct rmi_function *fn,
+ struct f30_data *f30)
+{
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ int error = 0;
+
+ error = rmi_read_block(rmi_dev, fn->fd.control_base_addr,
+ f30->ctrl_regs, f30->ctrl_regs_size);
+ if (error) {
+ dev_err(&rmi_dev->dev, "%s : Could not read control registers at 0x%x error (%d)\n",
+ __func__, fn->fd.control_base_addr, error);
+ return error;
+ }
+
+ return 0;
+}
+
+static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
+{
+ struct f30_data *f30 = dev_get_drvdata(&fn->dev);
+ int retval;
+ int gpiled = 0;
+ int value = 0;
+ int i;
+ int reg_num;
+
+ /* Read the gpi led data. */
+ retval = rmi_read_block(fn->rmi_dev, fn->fd.data_base_addr,
+ f30->data_regs, f30->register_count);
+
+ if (retval) {
+ dev_err(&fn->dev, "%s: Failed to read F30 data registers.\n",
+ __func__);
+ return retval;
+ }
+
+ for (reg_num = 0; reg_num < f30->register_count; ++reg_num) {
+ for (i = 0; gpiled < f30->gpioled_count && i < 8; ++i,
+ ++gpiled) {
+ if (f30->gpioled_key_map[gpiled] != 0) {
+ value = (((f30->data_regs[reg_num] >> i) & 0x01)
+ == f30->gpioled_sense_map[gpiled]);
+
+ dev_dbg(&fn->dev,
+ "%s: call input report key (0x%04x) value (0x%02x)",
+ __func__,
+ f30->gpioled_key_map[gpiled], value);
+ input_report_key(f30->input,
+ f30->gpioled_key_map[gpiled],
+ value);
+ }
+
+ }
+ }
+
+ input_sync(f30->input); /* sync after groups of events */
+ return 0;
+}
+
+static int rmi_f30_register_device(struct rmi_function *fn)
+{
+ int i;
+ int rc;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ struct f30_data *f30 = dev_get_drvdata(&fn->dev);
+ struct rmi_driver *driver = fn->rmi_dev->driver;
+ struct input_dev *input_dev;
+
+ input_dev = devm_input_allocate_device(&fn->dev);
+ if (!input_dev) {
+ dev_err(&fn->dev, "Failed to allocate input device.\n");
+ return -ENOMEM;
+ }
+
+ f30->input = input_dev;
+
+ if (driver->set_input_params) {
+ rc = driver->set_input_params(rmi_dev, input_dev);
+ if (rc < 0) {
+ dev_err(&fn->dev, "%s: Error in setting input device.\n",
+ __func__);
+ return rc;
+ }
+ }
+ sprintf(f30->input_phys, "%s/input0", dev_name(&fn->dev));
+ input_dev->phys = f30->input_phys;
+ input_dev->dev.parent = &rmi_dev->dev;
+ input_set_drvdata(input_dev, f30);
+
+ set_bit(EV_SYN, input_dev->evbit);
+ set_bit(EV_KEY, input_dev->evbit);
+
+ input_dev->keycode = f30->gpioled_key_map;
+ input_dev->keycodesize = sizeof(u16);
+ input_dev->keycodemax = f30->gpioled_count;
+
+ for (i = 0; i < f30->gpioled_count; i++) {
+ if (f30->gpioled_key_map[i] != 0)
+ input_set_capability(input_dev, EV_KEY,
+ f30->gpioled_key_map[i]);
+ }
+
+ rc = input_register_device(input_dev);
+ if (rc < 0) {
+ dev_err(&fn->dev, "Failed to register input device.\n");
+ return rc;
+ }
+ return 0;
+}
+
+static int rmi_f30_config(struct rmi_function *fn)
+{
+ struct f30_data *f30 = dev_get_drvdata(&fn->dev);
+ int error;
+
+ /* Write Control Register values back to device */
+ error = rmi_write_block(fn->rmi_dev, fn->fd.control_base_addr,
+ f30->ctrl_regs, f30->ctrl_regs_size);
+ if (error) {
+ dev_err(&fn->rmi_dev->dev,
+ "%s : Could not write control registers at 0x%x error (%d)\n",
+ __func__, fn->fd.control_base_addr, error);
+ return error;
+ }
+
+ return 0;
+}
+
+static inline void rmi_f30_set_ctrl_data(struct rmi_f30_ctrl_data *ctrl,
+ int *ctrl_addr, int len, u8 **reg)
+{
+ ctrl->address = *ctrl_addr;
+ ctrl->length = len;
+ ctrl->regs = *reg;
+ *ctrl_addr += len;
+ *reg += len;
+}
+
+static inline int rmi_f30_initialize(struct rmi_function *fn)
+{
+ struct f30_data *f30;
+ struct rmi_device *rmi_dev = fn->rmi_dev;
+ const struct rmi_device_platform_data *pdata;
+ int retval = 0;
+ int control_address;
+ u8 buf[RMI_F30_QUERY_SIZE];
+ u8 *ctrl_reg;
+ u8 *map_memory;
+
+ f30 = devm_kzalloc(&fn->dev, sizeof(struct f30_data),
+ GFP_KERNEL);
+ if (!f30) {
+ dev_err(&fn->dev, "Failed to allocate f30_data.\n");
+ return -ENOMEM;
+ }
+ dev_set_drvdata(&fn->dev, f30);
+
+ retval = rmi_read_block(fn->rmi_dev, fn->fd.query_base_addr, buf,
+ RMI_F30_QUERY_SIZE);
+
+ if (retval) {
+ dev_err(&fn->dev, "Failed to read query register.\n");
+ return retval;
+ }
+
+ f30->has_extended_pattern = buf[0] & RMI_F30_EXTENDED_PATTERNS;
+ f30->has_mappable_buttons = buf[0] & RMI_F30_HAS_MAPPABLE_BUTTONS;
+ f30->has_led = buf[0] & RMI_F30_HAS_LED;
+ f30->has_gpio = buf[0] & RMI_F30_HAS_GPIO;
+ f30->has_haptic = buf[0] & RMI_F30_HAS_HAPTIC;
+ f30->has_gpio_driver_control = buf[0] & RMI_F30_HAS_GPIO_DRV_CTL;
+ f30->has_mech_mouse_btns = buf[0] & RMI_F30_HAS_MECH_MOUSE_BTNS;
+ f30->gpioled_count = buf[1] & RMI_F30_GPIO_LED_COUNT;
+
+ f30->register_count = (f30->gpioled_count + 7) >> 3;
+
+ control_address = fn->fd.control_base_addr;
+ ctrl_reg = f30->ctrl_regs;
+
+ /* Allocate buffers for the control registers */
+ if (f30->has_led && f30->has_led)
+ rmi_f30_set_ctrl_data(&f30->ctrl[0], &control_address,
+ f30->register_count, &ctrl_reg);
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[1], &control_address, sizeof(u8),
+ &ctrl_reg);
+
+ if (f30->has_gpio) {
+ rmi_f30_set_ctrl_data(&f30->ctrl[2], &control_address,
+ f30->register_count, &ctrl_reg);
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[3], &control_address,
+ f30->register_count, &ctrl_reg);
+ }
+
+ if (f30->has_led) {
+ int ctrl5_len;
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[4], &control_address,
+ f30->register_count, &ctrl_reg);
+
+ if (f30->has_extended_pattern)
+ ctrl5_len = 6;
+ else
+ ctrl5_len = 2;
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[5], &control_address,
+ ctrl5_len, &ctrl_reg);
+ }
+
+ if (f30->has_led || f30->has_gpio_driver_control) {
+ /* control 6 uses a byte per gpio/led */
+ rmi_f30_set_ctrl_data(&f30->ctrl[6], &control_address,
+ f30->gpioled_count, &ctrl_reg);
+ }
+
+ if (f30->has_mappable_buttons) {
+ /* control 7 uses a byte per gpio/led */
+ rmi_f30_set_ctrl_data(&f30->ctrl[7], &control_address,
+ f30->gpioled_count, &ctrl_reg);
+ }
+
+ if (f30->has_haptic) {
+ rmi_f30_set_ctrl_data(&f30->ctrl[8], &control_address,
+ f30->register_count, &ctrl_reg);
+
+ rmi_f30_set_ctrl_data(&f30->ctrl[9], &control_address,
+ sizeof(u8), &ctrl_reg);
+ }
+
+ if (f30->has_mech_mouse_btns)
+ rmi_f30_set_ctrl_data(&f30->ctrl[10], &control_address,
+ sizeof(u8), &ctrl_reg);
+
+ f30->ctrl_regs_size = ctrl_reg - f30->ctrl_regs
+ ?: RMI_F30_CTRL_REGS_MAX_SIZE;
+
+ map_memory = devm_kzalloc(&fn->dev,
+ (f30->gpioled_count
+ * (sizeof(u16) + sizeof(u8))),
+ GFP_KERNEL);
+ if (!map_memory) {
+ dev_err(&fn->dev, "Failed to allocate gpioled map memory.\n");
+ return -ENOMEM;
+ }
+
+ f30->gpioled_key_map = (u16 *)map_memory;
+ f30->gpioled_sense_map = map_memory + sizeof(u16)
+ * f30->gpioled_count;
+
+ pdata = rmi_get_platform_data(rmi_dev);
+ if (pdata) {
+ if (!pdata->gpioled_map) {
+ dev_warn(&fn->dev,
+ "%s - gpioled_map is NULL", __func__);
+ } else if (!pdata->gpioled_map->map) {
+ dev_warn(&fn->dev,
+ "Platform Data button map is missing!\n");
+ } else {
+ int i;
+ for (i = 0; i < f30->gpioled_count
+ || i < pdata->gpioled_map->ngpioleds; i++) {
+ f30->gpioled_key_map[i] =
+ pdata->gpioled_map->map[i].button;
+ f30->gpioled_sense_map[i] =
+ pdata->gpioled_map->map[i].sense;
+ }
+ }
+ }
+
+ retval = rmi_f30_read_control_parameters(fn, f30);
+ if (retval < 0) {
+ dev_err(&fn->dev,
+ "Failed to initialize F19 control params.\n");
+ return retval;
+ }
+
+ return 0;
+}
+
+static int rmi_f30_probe(struct rmi_function *fn)
+{
+ int rc;
+
+ rc = rmi_f30_initialize(fn);
+ if (rc < 0)
+ goto error_exit;
+
+ rc = rmi_f30_register_device(fn);
+ if (rc < 0)
+ goto error_exit;
+
+ return 0;
+
+error_exit:
+ return rc;
+
+}
+
+static struct rmi_function_handler rmi_f30_handler = {
+ .driver = {
+ .name = "rmi_f30",
+ },
+ .func = 0x30,
+ .probe = rmi_f30_probe,
+ .config = rmi_f30_config,
+ .attention = rmi_f30_attention,
+};
+
+module_rmi_driver(rmi_f30_handler);
+
+MODULE_AUTHOR("Allie Xiong <axiong@synaptics.com>");
+MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com>");
+MODULE_DESCRIPTION("RMI F30 module");
+MODULE_LICENSE("GPL");
@@ -139,9 +139,14 @@ struct rmi_button_map {
u8 *map;
};
+struct rmi_f30_button {
+ u16 button;
+ int sense;
+};
+
struct rmi_f30_gpioled_map {
u8 ngpioleds;
- u8 *map;
+ struct rmi_f30_button *map;
};
/**