From patchwork Thu Mar 20 13:44:32 2014 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Lothar_Wa=C3=9Fmann?= X-Patchwork-Id: 3866131 Return-Path: X-Original-To: patchwork-linux-input@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id D227C9F39B for ; Thu, 20 Mar 2014 13:47:27 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 98FBF2025A for ; Thu, 20 Mar 2014 13:47:26 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 5BFC320251 for ; Thu, 20 Mar 2014 13:47:25 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758203AbaCTNpZ (ORCPT ); Thu, 20 Mar 2014 09:45:25 -0400 Received: from mail.karo-electronics.de ([81.173.242.67]:52092 "EHLO mail.karo-electronics.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755560AbaCTNpW (ORCPT ); Thu, 20 Mar 2014 09:45:22 -0400 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= To: Dmitry Torokhov , Fugang Duan , Grant Likely , Henrik Rydberg , Ian Campbell , Jingoo Han , Kumar Gala , Mark Rutland , Pawel Moll , Rob Herring , Rob Landley , Sachin Kamat , devicetree@vger.kernel.org, linux-doc@vger.kernel.org, linux-input@vger.kernel.org, linux-kernel@vger.kernel.org, Simon Budig , =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= , Daniel Wagener Subject: [PATCHv5 2/5] Input: edt-ft5x06: Add DT support Date: Thu, 20 Mar 2014 14:44:32 +0100 Message-Id: <1395323075-12146-3-git-send-email-LW@KARO-electronics.de> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1395323075-12146-1-git-send-email-LW@KARO-electronics.de> References: <1395234563-11034-1-git-send-email-LW@KARO-electronics.de> <1395323075-12146-1-git-send-email-LW@KARO-electronics.de> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, T_RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=ham version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Signed-off-by: Lothar Waßmann --- .../bindings/input/touchscreen/edt-ft5x06.txt | 55 ++++++++ drivers/input/touchscreen/edt-ft5x06.c | 143 +++++++++++++++----- 2 files changed, 167 insertions(+), 31 deletions(-) create mode 100644 Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt diff --git a/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt new file mode 100644 index 0000000..76db967 --- /dev/null +++ b/Documentation/devicetree/bindings/input/touchscreen/edt-ft5x06.txt @@ -0,0 +1,55 @@ +FocalTech EDT-FT5x06 Polytouch driver +===================================== + +There are 3 variants of the chip for various touch panel sizes +FT5206GE1 2.8" .. 3.8" +FT5306DE4 4.3" .. 7" +FT5406EE8 7" .. 8.9" + +The software interface is identical for all those chips, so that +currently there is no need for the driver to distinguish between the +different chips. Nevertheless distinct compatible strings are used so +that a distinction can be added if necessary without changing the DT +bindings. + + +Required properties: + - compatible: "edt,edt-ft5206" + or: "edt,edt-ft5306" + or: "edt,edt-ft5406" + + - reg: I2C slave address of the chip (0x38) + - interrupt-parent: a phandle pointing to the interrupt controller + serving the interrupt for this chip + - interrupts: interrupt specification for the touchdetect + interrupt + +Optional properties: + - reset-gpios: GPIO specification for the RESET input + - wake-gpios: GPIO specification for the WAKE input + + - pinctrl-names: should be "default" + - pinctrl-0: a phandle pointing to the pin settings for the + control gpios + + - threshold: allows setting the "click"-threshold in the range + from 20 to 80. + + - gain: allows setting the sensitivity in the range from 0 to + 31. Note that lower values indicate higher + sensitivity. + + - offset: allows setting the edge compensation in the range from + 0 to 31. + +Example: + polytouch: edt-ft5x06@38 { + compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; + reg = <0x38>; + pinctrl-names = "default"; + pinctrl-0 = <&edt_ft5x06_pins>; + interrupt-parent = <&gpio2>; + interrupts = <5 0>; + reset-gpios = <&gpio2 6 1>; + wake-gpios = <&gpio4 9 0>; + }; diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index 155ab3b..03dab2f 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -1,5 +1,6 @@ /* * Copyright (C) 2012 Simon Budig, + * Lothar Waßmann (DT support) * * This software is licensed under the terms of the GNU General Public * License version 2, as published by the Free Software Foundation, and @@ -33,6 +34,7 @@ #include #include #include +#include #include #include @@ -65,6 +67,10 @@ struct edt_ft5x06_ts_data { u16 num_x; u16 num_y; + int reset_pin; + int irq_pin; + int wake_pin; + #if defined(CONFIG_DEBUG_FS) struct dentry *debug_dir; u8 *raw_buffer; @@ -614,24 +620,38 @@ edt_ft5x06_ts_teardown_debugfs(struct edt_ft5x06_ts_data *tsdata) #endif /* CONFIG_DEBUGFS */ static int edt_ft5x06_ts_reset(struct i2c_client *client, - int reset_pin) + struct edt_ft5x06_ts_data *tsdata) { int error; - if (gpio_is_valid(reset_pin)) { + if (gpio_is_valid(tsdata->wake_pin)) { + error = devm_gpio_request_one(&client->dev, + tsdata->wake_pin, GPIOF_OUT_INIT_LOW, + "edt-ft5x06 wake"); + if (error) { + dev_err(&client->dev, + "Failed to request GPIO %d as wake pin, error %d\n", + tsdata->wake_pin, error); + return error; + } + + mdelay(5); + gpio_set_value(tsdata->wake_pin, 1); + } + if (gpio_is_valid(tsdata->reset_pin)) { /* this pulls reset down, enabling the low active reset */ - error = devm_gpio_request_one(&client->dev, reset_pin, - GPIOF_OUT_INIT_LOW, - "edt-ft5x06 reset"); + error = devm_gpio_request_one(&client->dev, + tsdata->reset_pin, GPIOF_OUT_INIT_LOW, + "edt-ft5x06 reset"); if (error) { dev_err(&client->dev, "Failed to request GPIO %d as reset pin, error %d\n", - reset_pin, error); + tsdata->reset_pin, error); return error; } mdelay(50); - gpio_set_value(reset_pin, 1); + gpio_set_value(tsdata->reset_pin, 1); mdelay(100); } @@ -672,6 +692,20 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client, pdata->name <= edt_ft5x06_attr_##name.limit_high) \ edt_ft5x06_register_write(tsdata, reg, pdata->name) +#define EDT_GET_PROP(name, reg) { \ + u32 val; \ + if (of_property_read_u32(np, #name, val) == 0) \ + edt_ft5x06_register_write(tsdata, reg, val); \ +} + +static void edt_ft5x06_ts_get_dt_defaults(struct device_node *np, + struct edt_ft5x06_ts_data *tsdata) +{ + EDT_GET_PROP(threshold, WORK_REGISTER_THRESHOLD); + EDT_GET_PROP(gain, WORK_REGISTER_GAIN); + EDT_GET_PROP(offset, WORK_REGISTER_OFFSET); +} + static void edt_ft5x06_ts_get_defaults(struct edt_ft5x06_ts_data *tsdata, const struct edt_ft5x06_platform_data *pdata) @@ -699,6 +733,30 @@ edt_ft5x06_ts_get_parameters(struct edt_ft5x06_ts_data *tsdata) tsdata->num_y = edt_ft5x06_register_read(tsdata, WORK_REGISTER_NUM_Y); } +#ifdef CONFIG_OF +static int edt_ft5x06_i2c_ts_probe_dt(struct device *dev, + struct edt_ft5x06_ts_data *tsdata) +{ + struct device_node *np = dev->of_node; + + /* + * irq_pin is not needed for DT setup. + * irq is associated via 'interrupts' property in DT + */ + tsdata->irq_pin = -EINVAL; + tsdata->reset_pin = of_get_named_gpio(np, "reset-gpios", 0); + tsdata->wake_pin = of_get_named_gpio(np, "wake-gpios", 0); + + return 0; +} +#else +static inline int edt_ft5x06_i2c_ts_probe_dt(struct device *dev, + struct edt_ft5x06_i2c_ts_data *tsdata) +{ + return -ENODEV; +} +#endif + static int edt_ft5x06_ts_probe(struct i2c_client *client, const struct i2c_device_id *id) { @@ -711,32 +769,40 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, dev_dbg(&client->dev, "probing for EDT FT5x06 I2C\n"); + tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL); + if (!tsdata) { + dev_err(&client->dev, "failed to allocate driver data.\n"); + return -ENOMEM; + } + if (!pdata) { - dev_err(&client->dev, "no platform data?\n"); - return -EINVAL; + error = edt_ft5x06_i2c_ts_probe_dt(&client->dev, tsdata); + if (error) { + dev_err(&client->dev, + "DT probe failed and no platform data present\n"); + return error; + } + } else { + tsdata->reset_pin = pdata->reset_pin; + tsdata->irq_pin = pdata->irq_pin; + tsdata->wake_pin = -EINVAL; } - error = edt_ft5x06_ts_reset(client, pdata->reset_pin); + error = edt_ft5x06_ts_reset(client, tsdata); if (error) return error; - if (gpio_is_valid(pdata->irq_pin)) { - error = devm_gpio_request_one(&client->dev, pdata->irq_pin, - GPIOF_IN, "edt-ft5x06 irq"); + if (gpio_is_valid(tsdata->irq_pin)) { + error = devm_gpio_request_one(&client->dev, tsdata->irq_pin, + GPIOF_IN, "edt-ft5x06 irq"); if (error) { dev_err(&client->dev, "Failed to request GPIO %d, error %d\n", - pdata->irq_pin, error); + tsdata->irq_pin, error); return error; } } - tsdata = devm_kzalloc(&client->dev, sizeof(*tsdata), GFP_KERNEL); - if (!tsdata) { - dev_err(&client->dev, "failed to allocate driver data.\n"); - return -ENOMEM; - } - input = devm_input_allocate_device(&client->dev); if (!input) { dev_err(&client->dev, "failed to allocate input device.\n"); @@ -754,7 +820,11 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, return error; } - edt_ft5x06_ts_get_defaults(tsdata, pdata); + if (!pdata) + edt_ft5x06_ts_get_dt_defaults(client->dev.of_node, tsdata); + else + edt_ft5x06_ts_get_defaults(tsdata, pdata); + edt_ft5x06_ts_get_parameters(tsdata); dev_dbg(&client->dev, @@ -784,10 +854,10 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, input_set_drvdata(input, tsdata); i2c_set_clientdata(client, tsdata); - error = devm_request_threaded_irq(&client->dev, client->irq, - NULL, edt_ft5x06_ts_isr, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - client->name, tsdata); + error = devm_request_threaded_irq(&client->dev, client->irq, NULL, + edt_ft5x06_ts_isr, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + client->name, tsdata); if (error) { dev_err(&client->dev, "Unable to request touchscreen IRQ.\n"); return error; @@ -798,19 +868,21 @@ static int edt_ft5x06_ts_probe(struct i2c_client *client, return error; error = input_register_device(input); - if (error) { - sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group); - return error; - } + if (error) + goto err_remove_attrs; edt_ft5x06_ts_prepare_debugfs(tsdata, dev_driver_string(&client->dev)); device_init_wakeup(&client->dev, 1); dev_dbg(&client->dev, - "EDT FT5x06 initialized: IRQ pin %d, Reset pin %d.\n", - pdata->irq_pin, pdata->reset_pin); + "EDT FT5x06 initialized: IRQ %d, WAKE pin %d, Reset pin %d.\n", + client->irq, tsdata->wake_pin, tsdata->reset_pin); return 0; + +err_remove_attrs: + sysfs_remove_group(&client->dev.kobj, &edt_ft5x06_attr_group); + return error; } static int edt_ft5x06_ts_remove(struct i2c_client *client) @@ -854,10 +926,19 @@ static const struct i2c_device_id edt_ft5x06_ts_id[] = { }; MODULE_DEVICE_TABLE(i2c, edt_ft5x06_ts_id); +static const struct of_device_id edt_ft5x06_of_match[] = { + { .compatible = "edt,edt-ft5206", }, + { .compatible = "edt,edt-ft5306", }, + { .compatible = "edt,edt-ft5406", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, edt_ft5x06_of_match); + static struct i2c_driver edt_ft5x06_ts_driver = { .driver = { .owner = THIS_MODULE, .name = "edt_ft5x06", + .of_match_table = edt_ft5x06_of_match, .pm = &edt_ft5x06_ts_pm_ops, }, .id_table = edt_ft5x06_ts_id,