@@ -717,6 +717,36 @@ static enum power_supply_property sony_battery_props[] = {
POWER_SUPPLY_PROP_STATUS,
};
+struct sixaxis_led {
+ __u8 time_enabled; /* the total time the led is active (0xff means forever) */
+ __u8 duty_length; /* how long a cycle is in deciseconds (0 means "really fast") */
+ __u8 enabled;
+ __u8 duty_off; /* % of duty_length the led is off (0xff means 100%) */
+ __u8 duty_on; /* % of duty_length the led is on (0xff mean 100%) */
+} __packed;
+
+struct sixaxis_rumble {
+ __u8 padding;
+ __u8 right_duration; /* Right motor duration (0xff means forever) */
+ __u8 right_motor_on; /* Right (small) motor on/off, only supports values of 0 or 1 (off/on) */
+ __u8 left_duration; /* Left motor duration (0xff means forever) */
+ __u8 left_motor_force; /* left (large) motor, supports force values from 0 to 255 */
+} __packed;
+
+struct sixaxis_output_report {
+ __u8 report_id;
+ struct sixaxis_rumble rumble;
+ __u8 padding[4];
+ __u8 leds_bitmap; /* bitmap of enabled LEDs: LED_1 = 0x02, LED_2 = 0x04, ... */
+ struct sixaxis_led led[4]; /* LEDx at (4 - x) */
+ struct sixaxis_led _reserved; /* LED5, not actually soldered */
+} __packed;
+
+union sixaxis_output_report_01 {
+ struct sixaxis_output_report data;
+ __u8 buf[36];
+};
+
static spinlock_t sony_dev_list_lock;
static LIST_HEAD(sony_device_list);
@@ -1244,29 +1274,31 @@ error_leds:
static void sixaxis_state_worker(struct work_struct *work)
{
struct sony_sc *sc = container_of(work, struct sony_sc, state_worker);
- unsigned char buf[] = {
- 0x01,
- 0x00, 0xff, 0x00, 0xff, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00,
- 0xff, 0x27, 0x10, 0x00, 0x32,
- 0xff, 0x27, 0x10, 0x00, 0x32,
- 0xff, 0x27, 0x10, 0x00, 0x32,
- 0xff, 0x27, 0x10, 0x00, 0x32,
- 0x00, 0x00, 0x00, 0x00, 0x00
+ union sixaxis_output_report_01 report = {
+ .buf = {
+ 0x01,
+ 0x00, 0xff, 0x00, 0xff, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0xff, 0x27, 0x10, 0x00, 0x32,
+ 0xff, 0x27, 0x10, 0x00, 0x32,
+ 0xff, 0x27, 0x10, 0x00, 0x32,
+ 0xff, 0x27, 0x10, 0x00, 0x32,
+ 0x00, 0x00, 0x00, 0x00, 0x00
+ }
};
#ifdef CONFIG_SONY_FF
- buf[3] = sc->right ? 1 : 0;
- buf[5] = sc->left;
+ report.data.rumble.right_motor_on = sc->right ? 1 : 0;
+ report.data.rumble.left_motor_force = sc->left;
#endif
- buf[10] |= sc->led_state[0] << 1;
- buf[10] |= sc->led_state[1] << 2;
- buf[10] |= sc->led_state[2] << 3;
- buf[10] |= sc->led_state[3] << 4;
+ report.data.leds_bitmap |= sc->led_state[0] << 1;
+ report.data.leds_bitmap |= sc->led_state[1] << 2;
+ report.data.leds_bitmap |= sc->led_state[2] << 3;
+ report.data.leds_bitmap |= sc->led_state[3] << 4;
- hid_hw_raw_request(sc->hdev, 0x01, buf, sizeof(buf), HID_OUTPUT_REPORT,
- HID_REQ_SET_REPORT);
+ hid_hw_raw_request(sc->hdev, report.data.report_id, report.buf,
+ sizeof(report), HID_OUTPUT_REPORT, HID_REQ_SET_REPORT);
}
static void dualshock4_state_worker(struct work_struct *work)
Use a struct for the Sixaxis output report that uses named members to set the report fields. Signed-off-by: Frank Praznik <frank.praznik@oh.rr.com> --- drivers/hid/hid-sony.c | 66 +++++++++++++++++++++++++++++++++++++------------- 1 file changed, 49 insertions(+), 17 deletions(-)