| Message ID | 1398980957-10385-1-git-send-email-aduggan@synaptics.com (mailing list archive) |
|---|---|
| State | New, archived |
| Delegated to: | Jiri Kosina |
| Headers | show |
Hi Andrew, On Thu, May 1, 2014 at 5:49 PM, Andrew Duggan <aduggan@synaptics.com> wrote: > The rmi4 spec defines some optional query registers in F11 which appear before > query 12. This patch checks for the existence of some of the lesser used queries to > compute the location of query12 and all subsequent query registers. > > Signed-off-by: Andrew Duggan <aduggan@synaptics.com> > --- This is quite important because the XPS 13 laptop shows currently a touchpad of physical size in mm of 5149 x 1972... :) Thanks Andrew for taking care of it. > drivers/hid/hid-rmi.c | 33 +++++++++++++++++++++++++++++---- > 1 file changed, 29 insertions(+), 4 deletions(-) > > diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c > index 90ae5eb..912e008 100644 > --- a/drivers/hid/hid-rmi.c > +++ b/drivers/hid/hid-rmi.c > @@ -546,9 +546,12 @@ static int rmi_populate_f11(struct hid_device *hdev) > struct rmi_data *data = hid_get_drvdata(hdev); > u8 buf[20]; > int ret; > + bool has_query9; > + bool has_query11; > bool has_query12; > bool has_physical_props; > unsigned x_size, y_size; > + u16 query12_offset; > > if (!data->f11.query_base_addr) { > hid_err(hdev, "No 2D sensor found, giving up.\n"); > @@ -561,6 +564,8 @@ static int rmi_populate_f11(struct hid_device *hdev) > hid_err(hdev, "can not get query 0: %d.\n", ret); > return ret; > } > + has_query9 = !!(buf[0] & BIT(3)); > + has_query11 = !!(buf[0] & BIT(4)); > has_query12 = !!(buf[0] & BIT(5)); > > /* query 1 to get the max number of fingers */ > @@ -582,11 +587,30 @@ static int rmi_populate_f11(struct hid_device *hdev) > } > > /* > - * query 12 to know if the physical properties are reported > - * (query 12 is at offset 10 for HID devices) > + * At least 8 queries are guaranteed to be present in F11 > + * +1 for query12. > */ > + query12_offset = 9; > + > + if (has_query9) > + ++query12_offset; > + > + /* query 8 to find out if query 10 exists */ > + ret = rmi_read(hdev, data->f11.query_base_addr + 8, buf); > + if (ret) { > + hid_err(hdev, "can not read gesture information: %d.\n", ret); > + return ret; > + } > + if (!!(buf[0] & BIT(2))) For consistency, I would have prefered to have "if (has_query10)" here. Other than that, the patch is reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Cheers, Benjamin > + ++query12_offset; > + > + if (has_query11) > + ++query12_offset; > + > + /* query 12 to know if the physical properties are reported */ > if (has_query12) { > - ret = rmi_read(hdev, data->f11.query_base_addr + 10, buf); > + ret = rmi_read(hdev, data->f11.query_base_addr > + + query12_offset, buf); > if (ret) { > hid_err(hdev, "can not get query 12: %d.\n", ret); > return ret; > @@ -595,7 +619,8 @@ static int rmi_populate_f11(struct hid_device *hdev) > > if (has_physical_props) { > ret = rmi_read_block(hdev, > - data->f11.query_base_addr + 11, buf, 4); > + data->f11.query_base_addr > + + query12_offset + 1, buf, 4); > if (ret) { > hid_err(hdev, "can not read query 15-18: %d.\n", > ret); > -- > 1.9.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c index 90ae5eb..912e008 100644 --- a/drivers/hid/hid-rmi.c +++ b/drivers/hid/hid-rmi.c @@ -546,9 +546,12 @@ static int rmi_populate_f11(struct hid_device *hdev) struct rmi_data *data = hid_get_drvdata(hdev); u8 buf[20]; int ret; + bool has_query9; + bool has_query11; bool has_query12; bool has_physical_props; unsigned x_size, y_size; + u16 query12_offset; if (!data->f11.query_base_addr) { hid_err(hdev, "No 2D sensor found, giving up.\n"); @@ -561,6 +564,8 @@ static int rmi_populate_f11(struct hid_device *hdev) hid_err(hdev, "can not get query 0: %d.\n", ret); return ret; } + has_query9 = !!(buf[0] & BIT(3)); + has_query11 = !!(buf[0] & BIT(4)); has_query12 = !!(buf[0] & BIT(5)); /* query 1 to get the max number of fingers */ @@ -582,11 +587,30 @@ static int rmi_populate_f11(struct hid_device *hdev) } /* - * query 12 to know if the physical properties are reported - * (query 12 is at offset 10 for HID devices) + * At least 8 queries are guaranteed to be present in F11 + * +1 for query12. */ + query12_offset = 9; + + if (has_query9) + ++query12_offset; + + /* query 8 to find out if query 10 exists */ + ret = rmi_read(hdev, data->f11.query_base_addr + 8, buf); + if (ret) { + hid_err(hdev, "can not read gesture information: %d.\n", ret); + return ret; + } + if (!!(buf[0] & BIT(2))) + ++query12_offset; + + if (has_query11) + ++query12_offset; + + /* query 12 to know if the physical properties are reported */ if (has_query12) { - ret = rmi_read(hdev, data->f11.query_base_addr + 10, buf); + ret = rmi_read(hdev, data->f11.query_base_addr + + query12_offset, buf); if (ret) { hid_err(hdev, "can not get query 12: %d.\n", ret); return ret; @@ -595,7 +619,8 @@ static int rmi_populate_f11(struct hid_device *hdev) if (has_physical_props) { ret = rmi_read_block(hdev, - data->f11.query_base_addr + 11, buf, 4); + data->f11.query_base_addr + + query12_offset + 1, buf, 4); if (ret) { hid_err(hdev, "can not read query 15-18: %d.\n", ret);
The rmi4 spec defines some optional query registers in F11 which appear before query 12. This patch checks for the existence of some of the lesser used queries to compute the location of query12 and all subsequent query registers. Signed-off-by: Andrew Duggan <aduggan@synaptics.com> --- drivers/hid/hid-rmi.c | 33 +++++++++++++++++++++++++++++---- 1 file changed, 29 insertions(+), 4 deletions(-)