diff mbox

[v2] HID: rmi: check for the existence of some optional queries before reading query 12

Message ID 1399054456-4594-1-git-send-email-aduggan@synaptics.com (mailing list archive)
State New, archived
Delegated to: Jiri Kosina
Headers show

Commit Message

Andrew Duggan May 2, 2014, 6:14 p.m. UTC 
The rmi4 spec defines some optional query registers in F11 which appear before
query 12. This patch checks for the existence of some of the lesser used queries to
 compute the location of query12 and all subsequent query registers.

Signed-off-by: Andrew Duggan <aduggan@synaptics.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
---
 drivers/hid/hid-rmi.c | 36 ++++++++++++++++++++++++++++++++----
 1 file changed, 32 insertions(+), 4 deletions(-)

Comments

Jiri Kosina May 13, 2014, 2:41 p.m. UTC | #1 
On Fri, 2 May 2014, Andrew Duggan wrote:

> The rmi4 spec defines some optional query registers in F11 which appear before
> query 12. This patch checks for the existence of some of the lesser used queries to
>  compute the location of query12 and all subsequent query registers.

Applied, thanks.
diff mbox

Patch

diff --git a/drivers/hid/hid-rmi.c b/drivers/hid/hid-rmi.c
index 90ae5eb..365c12b 100644
--- a/drivers/hid/hid-rmi.c
+++ b/drivers/hid/hid-rmi.c
@@ -546,9 +546,13 @@  static int rmi_populate_f11(struct hid_device *hdev)
 	struct rmi_data *data = hid_get_drvdata(hdev);
 	u8 buf[20];
 	int ret;
+	bool has_query9;
+	bool has_query10;
+	bool has_query11;
 	bool has_query12;
 	bool has_physical_props;
 	unsigned x_size, y_size;
+	u16 query12_offset;
 
 	if (!data->f11.query_base_addr) {
 		hid_err(hdev, "No 2D sensor found, giving up.\n");
@@ -561,6 +565,8 @@  static int rmi_populate_f11(struct hid_device *hdev)
 		hid_err(hdev, "can not get query 0: %d.\n", ret);
 		return ret;
 	}
+	has_query9 = !!(buf[0] & BIT(3));
+	has_query11 = !!(buf[0] & BIT(4));
 	has_query12 = !!(buf[0] & BIT(5));
 
 	/* query 1 to get the max number of fingers */
@@ -581,12 +587,33 @@  static int rmi_populate_f11(struct hid_device *hdev)
 		return -ENODEV;
 	}
 
+	/* query 8 to find out if query 10 exists */
+	ret = rmi_read(hdev, data->f11.query_base_addr + 8, buf);
+	if (ret) {
+		hid_err(hdev, "can not read gesture information: %d.\n", ret);
+		return ret;
+	}
+	has_query10 = !!(buf[0] & BIT(2));
+
 	/*
-	 * query 12 to know if the physical properties are reported
-	 * (query 12 is at offset 10 for HID devices)
+	 * At least 8 queries are guaranteed to be present in F11
+	 * +1 for query12.
 	 */
+	query12_offset = 9;
+
+	if (has_query9)
+		++query12_offset;
+
+	if (has_query10)
+		++query12_offset;
+
+	if (has_query11)
+		++query12_offset;
+
+	/* query 12 to know if the physical properties are reported */
 	if (has_query12) {
-		ret = rmi_read(hdev, data->f11.query_base_addr + 10, buf);
+		ret = rmi_read(hdev, data->f11.query_base_addr
+				+ query12_offset, buf);
 		if (ret) {
 			hid_err(hdev, "can not get query 12: %d.\n", ret);
 			return ret;
@@ -595,7 +622,8 @@  static int rmi_populate_f11(struct hid_device *hdev)
 
 		if (has_physical_props) {
 			ret = rmi_read_block(hdev,
-					data->f11.query_base_addr + 11, buf, 4);
+					data->f11.query_base_addr
+						+ query12_offset + 1, buf, 4);
 			if (ret) {
 				hid_err(hdev, "can not read query 15-18: %d.\n",
 					ret);