Message ID | 1406225645-32141-8-git-send-email-benjamin.tissoires@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Benjamin, On Thu, Jul 24, 2014 at 02:14:02PM -0400, Benjamin Tissoires wrote: > First, merge the Graphire BT tablet. > > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> > --- > > changes in v2: > - simplified because part of it has been splitted out in the previous commit. > > drivers/hid/hid-core.c | 1 - > drivers/hid/hid-wacom.c | 1 - > drivers/hid/wacom_sys.c | 42 +++++++++++++++++++++ > drivers/hid/wacom_wac.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++- > drivers/hid/wacom_wac.h | 2 + > 5 files changed, 140 insertions(+), 4 deletions(-) > > diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c > index 7cff1c2..4db6804 100644 > --- a/drivers/hid/hid-core.c > +++ b/drivers/hid/hid-core.c > @@ -1920,7 +1920,6 @@ static const struct hid_device_id hid_have_special_driver[] = { > { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, > { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) }, > { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO) }, > - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, > { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, > { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, > { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, > diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c > index 4874f4e..967c457 100644 > --- a/drivers/hid/hid-wacom.c > +++ b/drivers/hid/hid-wacom.c > @@ -952,7 +952,6 @@ static void wacom_remove(struct hid_device *hdev) > } > > static const struct hid_device_id wacom_devices[] = { > - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, > { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, > > { } > diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c > index add76ec..8492177 100644 > --- a/drivers/hid/wacom_sys.c > +++ b/drivers/hid/wacom_sys.c > @@ -265,6 +265,48 @@ static int wacom_set_device_mode(struct hid_device *hdev, int report_id, > static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed, > struct wacom_features *features) > { > + struct wacom *wacom = hid_get_drvdata(hdev); > + int limit, ret; > + __u8 rep_data[2]; I think just u8 in kerneli proper. > + > + switch (features->type) { > + case GRAPHIRE_BT: > + rep_data[0] = 0x03 ; rep_data[1] = 0x00; > + limit = 3; > + do { > + ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2, > + HID_FEATURE_REPORT, HID_REQ_SET_REPORT); > + } while (ret < 0 && limit-- > 0); > + > + if (ret >= 0) { > + if (speed == 0) > + rep_data[0] = 0x05; > + else > + rep_data[0] = 0x06; I am a fan of rep_data[0] = speed == 0 ? 0x05 : 0x06; as it takes 1 line vs 3. > + > + rep_data[1] = 0x00; > + limit = 3; > + do { > + ret = hid_hw_raw_request(hdev, rep_data[0], > + rep_data, 2, HID_FEATURE_REPORT, > + HID_REQ_SET_REPORT); > + } while (ret < 0 && limit-- > 0); > + > + if (ret >= 0) { > + wacom->wacom_wac.bt_high_speed = speed; > + return 0; > + } > + } > + > + /* > + * Note that if the raw queries fail, it's not a hard failure > + * and it is safe to continue > + */ > + hid_warn(hdev, "failed to poke device, command %d, err %d\n", > + rep_data[0], ret); > + break; > + } > + > return 0; > } > > diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c > index 2c69326..06bc600 100644 > --- a/drivers/hid/wacom_wac.c > +++ b/drivers/hid/wacom_wac.c > @@ -30,6 +30,10 @@ > */ > #define WACOM_CONTACT_AREA_SCALE 2607 > > +/*percent of battery capacity for Graphire > + 8th value means AC online and show 100% capacity */ > +static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 }; > + > static int wacom_penpartner_irq(struct wacom_wac *wacom) > { > unsigned char *data = wacom->data; > @@ -263,11 +267,19 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) > unsigned char *data = wacom->data; > struct input_dev *input = wacom->input; > struct input_dev *pad_input = wacom->pad_input; > + int battery_capacity, ps_connected; > int prox; > int rw = 0; > int retval = 0; > > - if (data[0] != WACOM_REPORT_PENABLED) { > + if (features->type == GRAPHIRE_BT) { > + if (data[0] != WACOM_REPORT_PENABLED_BT) { > + dev_dbg(input->dev.parent, > + "%s: received unknown report #%d\n", __func__, > + data[0]); > + goto exit; > + } > + } else if (data[0] != WACOM_REPORT_PENABLED) { > dev_dbg(input->dev.parent, > "%s: received unknown report #%d\n", __func__, data[0]); > goto exit; > @@ -301,7 +313,12 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) > input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); > input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); > if (wacom->tool[0] != BTN_TOOL_MOUSE) { > - input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8)); > + if (features->type == GRAPHIRE_BT) > + input_report_abs(input, ABS_PRESSURE, data[6] | > + (((__u16) (data[1] & 0x08)) << 5)); > + else > + input_report_abs(input, ABS_PRESSURE, data[6] | > + ((data[7] & 0x03) << 8)); > input_report_key(input, BTN_TOUCH, data[1] & 0x01); > input_report_key(input, BTN_STYLUS, data[1] & 0x02); > input_report_key(input, BTN_STYLUS2, data[1] & 0x04); > @@ -312,6 +329,23 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) > features->type == WACOM_MO) { > input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f); > rw = (data[7] & 0x04) - (data[7] & 0x03); > + } else if (features->type == GRAPHIRE_BT) { > + /* Compute distance between mouse and tablet */ > + rw = 44 - (data[6] >> 2); > + if (rw < 0) > + rw = 0; > + else if (rw > 31) > + rw = 31; rw = clamp_val(rw, 0, 31); ? > + input_report_abs(input, ABS_DISTANCE, rw); > + if (((data[1] >> 5) & 3) == 2) { > + /* Mouse with wheel */ > + input_report_key(input, BTN_MIDDLE, > + data[1] & 0x04); > + rw = (data[6] & 0x01) ? -1 : > + (data[6] & 0x02) ? 1 : 0; > + } else { > + rw = 0; > + } > } else { > input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f); > rw = -(signed char)data[6]; > @@ -358,6 +392,31 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) > retval = 1; > } > break; > + case GRAPHIRE_BT: > + prox = data[7] & 0x03; > + if (prox || wacom->id[1]) { > + wacom->id[1] = PAD_DEVICE_ID; > + input_report_key(pad_input, BTN_0, (data[7] & 0x02)); > + input_report_key(pad_input, BTN_1, (data[7] & 0x01)); > + if (!prox) > + wacom->id[1] = 0; > + input_report_abs(pad_input, ABS_MISC, wacom->id[1]); > + retval = 1; > + } > + break; > + } > + > + /* Store current battery capacity and power supply state */ > + if (features->type == GRAPHIRE_BT) { > + rw = (data[7] >> 2 & 0x07); > + battery_capacity = batcap_gr[rw]; > + ps_connected = rw == 7; > + if ((wacom->battery_capacity != battery_capacity) || > + (wacom->ps_connected != ps_connected)) { > + wacom->battery_capacity = battery_capacity; > + wacom->ps_connected = ps_connected; > + wacom_notify_battery(wacom); > + } > } > exit: > return retval; > @@ -1418,6 +1477,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) > > case WACOM_G4: > case GRAPHIRE: > + case GRAPHIRE_BT: > case WACOM_MO: > sync = wacom_graphire_irq(wacom_wac); > break; > @@ -1654,6 +1714,27 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, > __set_bit(INPUT_PROP_POINTER, input_dev->propbit); > break; > > + case GRAPHIRE_BT: > + __clear_bit(ABS_MISC, input_dev->absbit); > + input_set_abs_params(input_dev, ABS_DISTANCE, 0, > + features->distance_max, > + 0, 0); > + > + input_set_capability(input_dev, EV_REL, REL_WHEEL); > + > + __set_bit(BTN_LEFT, input_dev->keybit); > + __set_bit(BTN_RIGHT, input_dev->keybit); > + __set_bit(BTN_MIDDLE, input_dev->keybit); > + > + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); > + __set_bit(BTN_TOOL_PEN, input_dev->keybit); > + __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); > + __set_bit(BTN_STYLUS, input_dev->keybit); > + __set_bit(BTN_STYLUS2, input_dev->keybit); > + > + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); > + break; > + > case WACOM_24HD: > input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); > input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); > @@ -1848,6 +1929,11 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, > input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); > > switch (features->type) { > + case GRAPHIRE_BT: > + __set_bit(BTN_0, input_dev->keybit); > + __set_bit(BTN_1, input_dev->keybit); > + break; > + > case WACOM_MO: > __set_bit(BTN_BACK, input_dev->keybit); > __set_bit(BTN_LEFT, input_dev->keybit); > @@ -2017,6 +2103,9 @@ static const struct wacom_features wacom_features_0x00 = > static const struct wacom_features wacom_features_0x10 = > { "Wacom Graphire", 10206, 7422, 511, 63, > GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; > +static const struct wacom_features wacom_features_0x81 = > + { "Wacom Graphire BT", 16704, 12064, 511, 32, > + GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; > static const struct wacom_features wacom_features_0x11 = > { "Wacom Graphire2 4x5", 10206, 7422, 511, 63, > GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; > @@ -2412,6 +2501,10 @@ static const struct wacom_features wacom_features_0x309 = > HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ > .driver_data = (kernel_ulong_t)&wacom_features_##prod > > +#define BT_DEVICE_WACOM(prod) \ > + HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ > + .driver_data = (kernel_ulong_t)&wacom_features_##prod > + > #define USB_DEVICE_LENOVO(prod) \ > HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ > .driver_data = (kernel_ulong_t)&wacom_features_##prod > @@ -2469,6 +2562,7 @@ const struct hid_device_id wacom_ids[] = { > { USB_DEVICE_WACOM(0x69) }, > { USB_DEVICE_WACOM(0x6A) }, > { USB_DEVICE_WACOM(0x6B) }, > + { BT_DEVICE_WACOM(0x81) }, > { USB_DEVICE_WACOM(0x84) }, > { USB_DEVICE_WACOM(0x90) }, > { USB_DEVICE_WACOM(0x93) }, > diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h > index 3aa55d9..0f3df34 100644 > --- a/drivers/hid/wacom_wac.h > +++ b/drivers/hid/wacom_wac.h > @@ -46,6 +46,7 @@ > > /* wacom data packet report IDs */ > #define WACOM_REPORT_PENABLED 2 > +#define WACOM_REPORT_PENABLED_BT 3 > #define WACOM_REPORT_INTUOSREAD 5 > #define WACOM_REPORT_INTUOSWRITE 6 > #define WACOM_REPORT_INTUOSPAD 12 > @@ -73,6 +74,7 @@ > enum { > PENPARTNER = 0, > GRAPHIRE, > + GRAPHIRE_BT, > WACOM_G4, > PTU, > PL, > -- > 2.0.1 >
On Jul 24 2014 or thereabouts, Dmitry Torokhov wrote: > Hi Benjamin, > > On Thu, Jul 24, 2014 at 02:14:02PM -0400, Benjamin Tissoires wrote: > > First, merge the Graphire BT tablet. > > > > Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> > > --- > > > > changes in v2: > > - simplified because part of it has been splitted out in the previous commit. > > > > drivers/hid/hid-core.c | 1 - > > drivers/hid/hid-wacom.c | 1 - > > drivers/hid/wacom_sys.c | 42 +++++++++++++++++++++ > > drivers/hid/wacom_wac.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++- > > drivers/hid/wacom_wac.h | 2 + > > 5 files changed, 140 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c > > index 7cff1c2..4db6804 100644 > > --- a/drivers/hid/hid-core.c > > +++ b/drivers/hid/hid-core.c > > @@ -1920,7 +1920,6 @@ static const struct hid_device_id hid_have_special_driver[] = { > > { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, > > { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) }, > > { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO) }, > > - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, > > { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, > > { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, > > { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, > > diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c > > index 4874f4e..967c457 100644 > > --- a/drivers/hid/hid-wacom.c > > +++ b/drivers/hid/hid-wacom.c > > @@ -952,7 +952,6 @@ static void wacom_remove(struct hid_device *hdev) > > } > > > > static const struct hid_device_id wacom_devices[] = { > > - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, > > { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, > > > > { } > > diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c > > index add76ec..8492177 100644 > > --- a/drivers/hid/wacom_sys.c > > +++ b/drivers/hid/wacom_sys.c > > @@ -265,6 +265,48 @@ static int wacom_set_device_mode(struct hid_device *hdev, int report_id, > > static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed, > > struct wacom_features *features) > > { > > + struct wacom *wacom = hid_get_drvdata(hdev); > > + int limit, ret; > > + __u8 rep_data[2]; > > I think just u8 in kerneli proper. OK, I will adjust. > > > + > > + switch (features->type) { > > + case GRAPHIRE_BT: > > + rep_data[0] = 0x03 ; rep_data[1] = 0x00; > > + limit = 3; > > + do { > > + ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2, > > + HID_FEATURE_REPORT, HID_REQ_SET_REPORT); > > + } while (ret < 0 && limit-- > 0); > > + > > + if (ret >= 0) { > > + if (speed == 0) > > + rep_data[0] = 0x05; > > + else > > + rep_data[0] = 0x06; > > I am a fan of > > rep_data[0] = speed == 0 ? 0x05 : 0x06; > > as it takes 1 line vs 3. > hehe BTW, actually, I just copied/pasted the chunks from hid-wacom. But you are right, a little cleanup is definitively better. > > + > > + rep_data[1] = 0x00; > > + limit = 3; > > + do { > > + ret = hid_hw_raw_request(hdev, rep_data[0], > > + rep_data, 2, HID_FEATURE_REPORT, > > + HID_REQ_SET_REPORT); > > + } while (ret < 0 && limit-- > 0); > > + > > + if (ret >= 0) { > > + wacom->wacom_wac.bt_high_speed = speed; > > + return 0; > > + } > > + } > > + > > + /* > > + * Note that if the raw queries fail, it's not a hard failure > > + * and it is safe to continue > > + */ > > + hid_warn(hdev, "failed to poke device, command %d, err %d\n", > > + rep_data[0], ret); > > + break; > > + } > > + > > return 0; > > } > > > > diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c > > index 2c69326..06bc600 100644 > > --- a/drivers/hid/wacom_wac.c > > +++ b/drivers/hid/wacom_wac.c > > @@ -30,6 +30,10 @@ > > */ > > #define WACOM_CONTACT_AREA_SCALE 2607 > > > > +/*percent of battery capacity for Graphire > > + 8th value means AC online and show 100% capacity */ > > +static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 }; > > + > > static int wacom_penpartner_irq(struct wacom_wac *wacom) > > { > > unsigned char *data = wacom->data; > > @@ -263,11 +267,19 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) > > unsigned char *data = wacom->data; > > struct input_dev *input = wacom->input; > > struct input_dev *pad_input = wacom->pad_input; > > + int battery_capacity, ps_connected; > > int prox; > > int rw = 0; > > int retval = 0; > > > > - if (data[0] != WACOM_REPORT_PENABLED) { > > + if (features->type == GRAPHIRE_BT) { > > + if (data[0] != WACOM_REPORT_PENABLED_BT) { > > + dev_dbg(input->dev.parent, > > + "%s: received unknown report #%d\n", __func__, > > + data[0]); > > + goto exit; > > + } > > + } else if (data[0] != WACOM_REPORT_PENABLED) { > > dev_dbg(input->dev.parent, > > "%s: received unknown report #%d\n", __func__, data[0]); > > goto exit; > > @@ -301,7 +313,12 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) > > input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); > > input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); > > if (wacom->tool[0] != BTN_TOOL_MOUSE) { > > - input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8)); > > + if (features->type == GRAPHIRE_BT) > > + input_report_abs(input, ABS_PRESSURE, data[6] | > > + (((__u16) (data[1] & 0x08)) << 5)); > > + else > > + input_report_abs(input, ABS_PRESSURE, data[6] | > > + ((data[7] & 0x03) << 8)); > > input_report_key(input, BTN_TOUCH, data[1] & 0x01); > > input_report_key(input, BTN_STYLUS, data[1] & 0x02); > > input_report_key(input, BTN_STYLUS2, data[1] & 0x04); > > @@ -312,6 +329,23 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) > > features->type == WACOM_MO) { > > input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f); > > rw = (data[7] & 0x04) - (data[7] & 0x03); > > + } else if (features->type == GRAPHIRE_BT) { > > + /* Compute distance between mouse and tablet */ > > + rw = 44 - (data[6] >> 2); > > + if (rw < 0) > > + rw = 0; > > + else if (rw > 31) > > + rw = 31; > > rw = clamp_val(rw, 0, 31); > > ? could be... I'll do the tests and resubmit later the v3. I'll wait a little in case you have other comments on the other patches :) Cheers, Benjamin > > > + input_report_abs(input, ABS_DISTANCE, rw); > > + if (((data[1] >> 5) & 3) == 2) { > > + /* Mouse with wheel */ > > + input_report_key(input, BTN_MIDDLE, > > + data[1] & 0x04); > > + rw = (data[6] & 0x01) ? -1 : > > + (data[6] & 0x02) ? 1 : 0; > > + } else { > > + rw = 0; > > + } > > } else { > > input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f); > > rw = -(signed char)data[6]; > > @@ -358,6 +392,31 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) > > retval = 1; > > } > > break; > > + case GRAPHIRE_BT: > > + prox = data[7] & 0x03; > > + if (prox || wacom->id[1]) { > > + wacom->id[1] = PAD_DEVICE_ID; > > + input_report_key(pad_input, BTN_0, (data[7] & 0x02)); > > + input_report_key(pad_input, BTN_1, (data[7] & 0x01)); > > + if (!prox) > > + wacom->id[1] = 0; > > + input_report_abs(pad_input, ABS_MISC, wacom->id[1]); > > + retval = 1; > > + } > > + break; > > + } > > + > > + /* Store current battery capacity and power supply state */ > > + if (features->type == GRAPHIRE_BT) { > > + rw = (data[7] >> 2 & 0x07); > > + battery_capacity = batcap_gr[rw]; > > + ps_connected = rw == 7; > > + if ((wacom->battery_capacity != battery_capacity) || > > + (wacom->ps_connected != ps_connected)) { > > + wacom->battery_capacity = battery_capacity; > > + wacom->ps_connected = ps_connected; > > + wacom_notify_battery(wacom); > > + } > > } > > exit: > > return retval; > > @@ -1418,6 +1477,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) > > > > case WACOM_G4: > > case GRAPHIRE: > > + case GRAPHIRE_BT: > > case WACOM_MO: > > sync = wacom_graphire_irq(wacom_wac); > > break; > > @@ -1654,6 +1714,27 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, > > __set_bit(INPUT_PROP_POINTER, input_dev->propbit); > > break; > > > > + case GRAPHIRE_BT: > > + __clear_bit(ABS_MISC, input_dev->absbit); > > + input_set_abs_params(input_dev, ABS_DISTANCE, 0, > > + features->distance_max, > > + 0, 0); > > + > > + input_set_capability(input_dev, EV_REL, REL_WHEEL); > > + > > + __set_bit(BTN_LEFT, input_dev->keybit); > > + __set_bit(BTN_RIGHT, input_dev->keybit); > > + __set_bit(BTN_MIDDLE, input_dev->keybit); > > + > > + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); > > + __set_bit(BTN_TOOL_PEN, input_dev->keybit); > > + __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); > > + __set_bit(BTN_STYLUS, input_dev->keybit); > > + __set_bit(BTN_STYLUS2, input_dev->keybit); > > + > > + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); > > + break; > > + > > case WACOM_24HD: > > input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); > > input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); > > @@ -1848,6 +1929,11 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, > > input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); > > > > switch (features->type) { > > + case GRAPHIRE_BT: > > + __set_bit(BTN_0, input_dev->keybit); > > + __set_bit(BTN_1, input_dev->keybit); > > + break; > > + > > case WACOM_MO: > > __set_bit(BTN_BACK, input_dev->keybit); > > __set_bit(BTN_LEFT, input_dev->keybit); > > @@ -2017,6 +2103,9 @@ static const struct wacom_features wacom_features_0x00 = > > static const struct wacom_features wacom_features_0x10 = > > { "Wacom Graphire", 10206, 7422, 511, 63, > > GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; > > +static const struct wacom_features wacom_features_0x81 = > > + { "Wacom Graphire BT", 16704, 12064, 511, 32, > > + GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; > > static const struct wacom_features wacom_features_0x11 = > > { "Wacom Graphire2 4x5", 10206, 7422, 511, 63, > > GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; > > @@ -2412,6 +2501,10 @@ static const struct wacom_features wacom_features_0x309 = > > HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ > > .driver_data = (kernel_ulong_t)&wacom_features_##prod > > > > +#define BT_DEVICE_WACOM(prod) \ > > + HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ > > + .driver_data = (kernel_ulong_t)&wacom_features_##prod > > + > > #define USB_DEVICE_LENOVO(prod) \ > > HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ > > .driver_data = (kernel_ulong_t)&wacom_features_##prod > > @@ -2469,6 +2562,7 @@ const struct hid_device_id wacom_ids[] = { > > { USB_DEVICE_WACOM(0x69) }, > > { USB_DEVICE_WACOM(0x6A) }, > > { USB_DEVICE_WACOM(0x6B) }, > > + { BT_DEVICE_WACOM(0x81) }, > > { USB_DEVICE_WACOM(0x84) }, > > { USB_DEVICE_WACOM(0x90) }, > > { USB_DEVICE_WACOM(0x93) }, > > diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h > > index 3aa55d9..0f3df34 100644 > > --- a/drivers/hid/wacom_wac.h > > +++ b/drivers/hid/wacom_wac.h > > @@ -46,6 +46,7 @@ > > > > /* wacom data packet report IDs */ > > #define WACOM_REPORT_PENABLED 2 > > +#define WACOM_REPORT_PENABLED_BT 3 > > #define WACOM_REPORT_INTUOSREAD 5 > > #define WACOM_REPORT_INTUOSWRITE 6 > > #define WACOM_REPORT_INTUOSPAD 12 > > @@ -73,6 +74,7 @@ > > enum { > > PENPARTNER = 0, > > GRAPHIRE, > > + GRAPHIRE_BT, > > WACOM_G4, > > PTU, > > PL, > > -- > > 2.0.1 > > > > -- > Dmitry -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Jul 24, 2014 at 03:43:52PM -0400, Benjamin Tissoires wrote: > On Jul 24 2014 or thereabouts, Dmitry Torokhov wrote: > > Hi Benjamin, > > > > On Thu, Jul 24, 2014 at 02:14:02PM -0400, Benjamin Tissoires wrote: > > > + } else if (features->type == GRAPHIRE_BT) { > > > + /* Compute distance between mouse and tablet */ > > > + rw = 44 - (data[6] >> 2); > > > + if (rw < 0) > > > + rw = 0; > > > + else if (rw > 31) > > > + rw = 31; > > > > rw = clamp_val(rw, 0, 31); > > > > ? > > could be... > > I'll do the tests and resubmit later the v3. I'll wait a little in case > you have other comments on the other patches :) How about doing it incrementally - the patch is still sound as far as I am concerned. I will wait a bit for other to chime in with comments or acks before applying this series.
On Jul 24 2014 or thereabouts, Dmitry Torokhov wrote: > On Thu, Jul 24, 2014 at 03:43:52PM -0400, Benjamin Tissoires wrote: > > On Jul 24 2014 or thereabouts, Dmitry Torokhov wrote: > > > Hi Benjamin, > > > > > > On Thu, Jul 24, 2014 at 02:14:02PM -0400, Benjamin Tissoires wrote: > > > > + } else if (features->type == GRAPHIRE_BT) { > > > > + /* Compute distance between mouse and tablet */ > > > > + rw = 44 - (data[6] >> 2); > > > > + if (rw < 0) > > > > + rw = 0; > > > > + else if (rw > 31) > > > > + rw = 31; > > > > > > rw = clamp_val(rw, 0, 31); > > > > > > ? > > > > could be... > > > > I'll do the tests and resubmit later the v3. I'll wait a little in case > > you have other comments on the other patches :) > > How about doing it incrementally - the patch is still sound as far as I > am concerned. I will wait a bit for other to chime in with comments or > acks before applying this series. > As you want. Just making the exact changes you mentioned still makes the Graphire working (what a surprise, isn't it?). So I am fine either way. Cheers, Benjamin -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index 7cff1c2..4db6804 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -1920,7 +1920,6 @@ static const struct hid_device_id hid_have_special_driver[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_3_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_DUAL_BOX_PRO) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP_LTD, USB_DEVICE_ID_SUPER_JOY_BOX_5_PRO) }, - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_5_8_INCH) }, { HID_USB_DEVICE(USB_VENDOR_ID_WALTOP, USB_DEVICE_ID_WALTOP_SLIM_TABLET_12_1_INCH) }, diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index 4874f4e..967c457 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -952,7 +952,6 @@ static void wacom_remove(struct hid_device *hdev) } static const struct hid_device_id wacom_devices[] = { - { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_GRAPHIRE_BLUETOOTH) }, { HID_BLUETOOTH_DEVICE(USB_VENDOR_ID_WACOM, USB_DEVICE_ID_WACOM_INTUOS4_BLUETOOTH) }, { } diff --git a/drivers/hid/wacom_sys.c b/drivers/hid/wacom_sys.c index add76ec..8492177 100644 --- a/drivers/hid/wacom_sys.c +++ b/drivers/hid/wacom_sys.c @@ -265,6 +265,48 @@ static int wacom_set_device_mode(struct hid_device *hdev, int report_id, static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed, struct wacom_features *features) { + struct wacom *wacom = hid_get_drvdata(hdev); + int limit, ret; + __u8 rep_data[2]; + + switch (features->type) { + case GRAPHIRE_BT: + rep_data[0] = 0x03 ; rep_data[1] = 0x00; + limit = 3; + do { + ret = hid_hw_raw_request(hdev, rep_data[0], rep_data, 2, + HID_FEATURE_REPORT, HID_REQ_SET_REPORT); + } while (ret < 0 && limit-- > 0); + + if (ret >= 0) { + if (speed == 0) + rep_data[0] = 0x05; + else + rep_data[0] = 0x06; + + rep_data[1] = 0x00; + limit = 3; + do { + ret = hid_hw_raw_request(hdev, rep_data[0], + rep_data, 2, HID_FEATURE_REPORT, + HID_REQ_SET_REPORT); + } while (ret < 0 && limit-- > 0); + + if (ret >= 0) { + wacom->wacom_wac.bt_high_speed = speed; + return 0; + } + } + + /* + * Note that if the raw queries fail, it's not a hard failure + * and it is safe to continue + */ + hid_warn(hdev, "failed to poke device, command %d, err %d\n", + rep_data[0], ret); + break; + } + return 0; } diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 2c69326..06bc600 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -30,6 +30,10 @@ */ #define WACOM_CONTACT_AREA_SCALE 2607 +/*percent of battery capacity for Graphire + 8th value means AC online and show 100% capacity */ +static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 }; + static int wacom_penpartner_irq(struct wacom_wac *wacom) { unsigned char *data = wacom->data; @@ -263,11 +267,19 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) unsigned char *data = wacom->data; struct input_dev *input = wacom->input; struct input_dev *pad_input = wacom->pad_input; + int battery_capacity, ps_connected; int prox; int rw = 0; int retval = 0; - if (data[0] != WACOM_REPORT_PENABLED) { + if (features->type == GRAPHIRE_BT) { + if (data[0] != WACOM_REPORT_PENABLED_BT) { + dev_dbg(input->dev.parent, + "%s: received unknown report #%d\n", __func__, + data[0]); + goto exit; + } + } else if (data[0] != WACOM_REPORT_PENABLED) { dev_dbg(input->dev.parent, "%s: received unknown report #%d\n", __func__, data[0]); goto exit; @@ -301,7 +313,12 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2])); input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4])); if (wacom->tool[0] != BTN_TOOL_MOUSE) { - input_report_abs(input, ABS_PRESSURE, data[6] | ((data[7] & 0x03) << 8)); + if (features->type == GRAPHIRE_BT) + input_report_abs(input, ABS_PRESSURE, data[6] | + (((__u16) (data[1] & 0x08)) << 5)); + else + input_report_abs(input, ABS_PRESSURE, data[6] | + ((data[7] & 0x03) << 8)); input_report_key(input, BTN_TOUCH, data[1] & 0x01); input_report_key(input, BTN_STYLUS, data[1] & 0x02); input_report_key(input, BTN_STYLUS2, data[1] & 0x04); @@ -312,6 +329,23 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) features->type == WACOM_MO) { input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f); rw = (data[7] & 0x04) - (data[7] & 0x03); + } else if (features->type == GRAPHIRE_BT) { + /* Compute distance between mouse and tablet */ + rw = 44 - (data[6] >> 2); + if (rw < 0) + rw = 0; + else if (rw > 31) + rw = 31; + input_report_abs(input, ABS_DISTANCE, rw); + if (((data[1] >> 5) & 3) == 2) { + /* Mouse with wheel */ + input_report_key(input, BTN_MIDDLE, + data[1] & 0x04); + rw = (data[6] & 0x01) ? -1 : + (data[6] & 0x02) ? 1 : 0; + } else { + rw = 0; + } } else { input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f); rw = -(signed char)data[6]; @@ -358,6 +392,31 @@ static int wacom_graphire_irq(struct wacom_wac *wacom) retval = 1; } break; + case GRAPHIRE_BT: + prox = data[7] & 0x03; + if (prox || wacom->id[1]) { + wacom->id[1] = PAD_DEVICE_ID; + input_report_key(pad_input, BTN_0, (data[7] & 0x02)); + input_report_key(pad_input, BTN_1, (data[7] & 0x01)); + if (!prox) + wacom->id[1] = 0; + input_report_abs(pad_input, ABS_MISC, wacom->id[1]); + retval = 1; + } + break; + } + + /* Store current battery capacity and power supply state */ + if (features->type == GRAPHIRE_BT) { + rw = (data[7] >> 2 & 0x07); + battery_capacity = batcap_gr[rw]; + ps_connected = rw == 7; + if ((wacom->battery_capacity != battery_capacity) || + (wacom->ps_connected != ps_connected)) { + wacom->battery_capacity = battery_capacity; + wacom->ps_connected = ps_connected; + wacom_notify_battery(wacom); + } } exit: return retval; @@ -1418,6 +1477,7 @@ void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len) case WACOM_G4: case GRAPHIRE: + case GRAPHIRE_BT: case WACOM_MO: sync = wacom_graphire_irq(wacom_wac); break; @@ -1654,6 +1714,27 @@ int wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; + case GRAPHIRE_BT: + __clear_bit(ABS_MISC, input_dev->absbit); + input_set_abs_params(input_dev, ABS_DISTANCE, 0, + features->distance_max, + 0, 0); + + input_set_capability(input_dev, EV_REL, REL_WHEEL); + + __set_bit(BTN_LEFT, input_dev->keybit); + __set_bit(BTN_RIGHT, input_dev->keybit); + __set_bit(BTN_MIDDLE, input_dev->keybit); + + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + break; + case WACOM_24HD: input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0); @@ -1848,6 +1929,11 @@ int wacom_setup_pad_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0); switch (features->type) { + case GRAPHIRE_BT: + __set_bit(BTN_0, input_dev->keybit); + __set_bit(BTN_1, input_dev->keybit); + break; + case WACOM_MO: __set_bit(BTN_BACK, input_dev->keybit); __set_bit(BTN_LEFT, input_dev->keybit); @@ -2017,6 +2103,9 @@ static const struct wacom_features wacom_features_0x00 = static const struct wacom_features wacom_features_0x10 = { "Wacom Graphire", 10206, 7422, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; +static const struct wacom_features wacom_features_0x81 = + { "Wacom Graphire BT", 16704, 12064, 511, 32, + GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; static const struct wacom_features wacom_features_0x11 = { "Wacom Graphire2 4x5", 10206, 7422, 511, 63, GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES }; @@ -2412,6 +2501,10 @@ static const struct wacom_features wacom_features_0x309 = HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ .driver_data = (kernel_ulong_t)&wacom_features_##prod +#define BT_DEVICE_WACOM(prod) \ + HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\ + .driver_data = (kernel_ulong_t)&wacom_features_##prod + #define USB_DEVICE_LENOVO(prod) \ HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \ .driver_data = (kernel_ulong_t)&wacom_features_##prod @@ -2469,6 +2562,7 @@ const struct hid_device_id wacom_ids[] = { { USB_DEVICE_WACOM(0x69) }, { USB_DEVICE_WACOM(0x6A) }, { USB_DEVICE_WACOM(0x6B) }, + { BT_DEVICE_WACOM(0x81) }, { USB_DEVICE_WACOM(0x84) }, { USB_DEVICE_WACOM(0x90) }, { USB_DEVICE_WACOM(0x93) }, diff --git a/drivers/hid/wacom_wac.h b/drivers/hid/wacom_wac.h index 3aa55d9..0f3df34 100644 --- a/drivers/hid/wacom_wac.h +++ b/drivers/hid/wacom_wac.h @@ -46,6 +46,7 @@ /* wacom data packet report IDs */ #define WACOM_REPORT_PENABLED 2 +#define WACOM_REPORT_PENABLED_BT 3 #define WACOM_REPORT_INTUOSREAD 5 #define WACOM_REPORT_INTUOSWRITE 6 #define WACOM_REPORT_INTUOSPAD 12 @@ -73,6 +74,7 @@ enum { PENPARTNER = 0, GRAPHIRE, + GRAPHIRE_BT, WACOM_G4, PTU, PL,
First, merge the Graphire BT tablet. Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> --- changes in v2: - simplified because part of it has been splitted out in the previous commit. drivers/hid/hid-core.c | 1 - drivers/hid/hid-wacom.c | 1 - drivers/hid/wacom_sys.c | 42 +++++++++++++++++++++ drivers/hid/wacom_wac.c | 98 ++++++++++++++++++++++++++++++++++++++++++++++++- drivers/hid/wacom_wac.h | 2 + 5 files changed, 140 insertions(+), 4 deletions(-)