| Message ID | 1423227190-10943-1-git-send-email-rogerq@ti.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Roger, On Fri, Feb 06, 2015 at 02:53:10PM +0200, Roger Quadros wrote: > The controller has a RESET pin which is usually controlled over > a GPIO line. If such a GPIO is provided, perform a RESET > during probe. > > Signed-off-by: Roger Quadros <rogerq@ti.com> > --- > .../bindings/input/touchscreen/pixcir_i2c_ts.txt | 3 ++ > drivers/input/touchscreen/pixcir_i2c_ts.c | 37 ++++++++++++++++++++-- > include/linux/input/pixcir_ts.h | 1 + > 3 files changed, 38 insertions(+), 3 deletions(-) > > diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt > index 6e55109..8eb240a 100644 > --- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt > +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt > @@ -8,6 +8,9 @@ Required properties: > - touchscreen-size-x: horizontal resolution of touchscreen (in pixels) > - touchscreen-size-y: vertical resolution of touchscreen (in pixels) > > +Optional properties: > +- reset-gpio: GPIO connected to the RESET line of the chip > + > Example: > > i2c@00000000 { > diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c > index 4fb5537..610ce0b 100644 > --- a/drivers/input/touchscreen/pixcir_i2c_ts.c > +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c > @@ -51,6 +51,19 @@ struct pixcir_report_data { > struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; > }; > > +static void pixcir_reset(struct pixcir_i2c_ts_data *tsdata) > +{ > + const struct pixcir_ts_platform_data *pdata = tsdata->pdata; > + > + if (gpio_is_valid(pdata->gpio_reset)) { > + gpio_set_value(pdata->gpio_reset, 1); > + ndelay(80); > + gpio_set_value(pdata->gpio_reset, 0); > + /* wait as controller might not immediately respond */ > + msleep(100); > + } > +} > + > static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, > struct pixcir_report_data *report) > { > @@ -428,7 +441,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) > pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data; > > pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0); > - /* gpio_attb validity is checked in probe */ > + pdata->gpio_reset = of_get_named_gpio(np, "reset-gpio", 0); > + /* gpio validity is checked in probe */ > > if (of_property_read_u32(np, "touchscreen-size-x", &pdata->x_max)) { > dev_err(dev, "Failed to get touchscreen-size-x property\n"); > @@ -442,8 +456,9 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) > } > pdata->y_max -= 1; > > - dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, > - pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); > + dev_dbg(dev, "%s: x %d, y %d, ATTB gpio %d, RESET gpio %d\n", __func__, > + pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb, > + pdata->gpio_reset); > > return pdata; > } > @@ -481,6 +496,10 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, > return -EINVAL; > } > > + /* RESET gpio is optional */ > + if (!gpio_is_valid(pdata->gpio_reset)) > + dev_info(dev, "Invalid gpio_reset in pdata\n"); > + > if (!pdata->chip.max_fingers) { > dev_err(dev, "Invalid max_fingers in pdata\n"); > return -EINVAL; > @@ -530,6 +549,16 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, > > input_set_drvdata(input, tsdata); > > + if (gpio_is_valid(pdata->gpio_reset)) { > + error = devm_gpio_request_one(dev, pdata->gpio_reset, > + GPIOF_OUT_INIT_LOW, > + "pixcir_i2c_reset"); > + if (error) { > + dev_err(dev, "Failed to request RESET gpio\n"); > + return error; > + } > + } > + > error = devm_gpio_request_one(dev, pdata->gpio_attb, > GPIOF_DIR_IN, "pixcir_i2c_attb"); > if (error) { > @@ -545,6 +574,8 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, > return error; > } > > + pixcir_reset(tsdata); > + > /* Always be in IDLE mode to save power, device supports auto wake */ > error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE); > if (error) { > diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h > index 7bae83b..9e91fd3 100644 > --- a/include/linux/input/pixcir_ts.h > +++ b/include/linux/input/pixcir_ts.h > @@ -58,6 +58,7 @@ struct pixcir_ts_platform_data { > int x_max; > int y_max; > int gpio_attb; /* GPIO connected to ATTB line */ > + int gpio_reset; /* GPIO connected to RESET line */ > struct pixcir_i2c_chip_data chip; Declaring gpio_reset like this means that non-OF platforms will have it as 0, which is usually a valid gpio number, which means they'll get a nasty surprise when they update the driver. Maybe we should add a flag, or at least document that it should be set to -1 if not available (since I do not see non-OF users in the tree)? Thanks.
Hi Dmitry, On 06/02/15 18:54, Dmitry Torokhov wrote: > Hi Roger, > > On Fri, Feb 06, 2015 at 02:53:10PM +0200, Roger Quadros wrote: >> The controller has a RESET pin which is usually controlled over >> a GPIO line. If such a GPIO is provided, perform a RESET >> during probe. >> >> Signed-off-by: Roger Quadros <rogerq@ti.com> >> --- >> .../bindings/input/touchscreen/pixcir_i2c_ts.txt | 3 ++ >> drivers/input/touchscreen/pixcir_i2c_ts.c | 37 ++++++++++++++++++++-- >> include/linux/input/pixcir_ts.h | 1 + >> 3 files changed, 38 insertions(+), 3 deletions(-) >> >> diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt >> index 6e55109..8eb240a 100644 >> --- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt >> +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt >> @@ -8,6 +8,9 @@ Required properties: >> - touchscreen-size-x: horizontal resolution of touchscreen (in pixels) >> - touchscreen-size-y: vertical resolution of touchscreen (in pixels) >> >> +Optional properties: >> +- reset-gpio: GPIO connected to the RESET line of the chip >> + >> Example: >> >> i2c@00000000 { >> diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c >> index 4fb5537..610ce0b 100644 >> --- a/drivers/input/touchscreen/pixcir_i2c_ts.c >> +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c >> @@ -51,6 +51,19 @@ struct pixcir_report_data { >> struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; >> }; >> >> +static void pixcir_reset(struct pixcir_i2c_ts_data *tsdata) >> +{ >> + const struct pixcir_ts_platform_data *pdata = tsdata->pdata; >> + >> + if (gpio_is_valid(pdata->gpio_reset)) { >> + gpio_set_value(pdata->gpio_reset, 1); >> + ndelay(80); >> + gpio_set_value(pdata->gpio_reset, 0); >> + /* wait as controller might not immediately respond */ >> + msleep(100); >> + } >> +} >> + >> static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, >> struct pixcir_report_data *report) >> { >> @@ -428,7 +441,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) >> pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data; >> >> pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0); >> - /* gpio_attb validity is checked in probe */ >> + pdata->gpio_reset = of_get_named_gpio(np, "reset-gpio", 0); >> + /* gpio validity is checked in probe */ >> >> if (of_property_read_u32(np, "touchscreen-size-x", &pdata->x_max)) { >> dev_err(dev, "Failed to get touchscreen-size-x property\n"); >> @@ -442,8 +456,9 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) >> } >> pdata->y_max -= 1; >> >> - dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, >> - pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); >> + dev_dbg(dev, "%s: x %d, y %d, ATTB gpio %d, RESET gpio %d\n", __func__, >> + pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb, >> + pdata->gpio_reset); >> >> return pdata; >> } >> @@ -481,6 +496,10 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, >> return -EINVAL; >> } >> >> + /* RESET gpio is optional */ >> + if (!gpio_is_valid(pdata->gpio_reset)) >> + dev_info(dev, "Invalid gpio_reset in pdata\n"); >> + >> if (!pdata->chip.max_fingers) { >> dev_err(dev, "Invalid max_fingers in pdata\n"); >> return -EINVAL; >> @@ -530,6 +549,16 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, >> >> input_set_drvdata(input, tsdata); >> >> + if (gpio_is_valid(pdata->gpio_reset)) { >> + error = devm_gpio_request_one(dev, pdata->gpio_reset, >> + GPIOF_OUT_INIT_LOW, >> + "pixcir_i2c_reset"); >> + if (error) { >> + dev_err(dev, "Failed to request RESET gpio\n"); >> + return error; >> + } >> + } >> + >> error = devm_gpio_request_one(dev, pdata->gpio_attb, >> GPIOF_DIR_IN, "pixcir_i2c_attb"); >> if (error) { >> @@ -545,6 +574,8 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, >> return error; >> } >> >> + pixcir_reset(tsdata); >> + >> /* Always be in IDLE mode to save power, device supports auto wake */ >> error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE); >> if (error) { >> diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h >> index 7bae83b..9e91fd3 100644 >> --- a/include/linux/input/pixcir_ts.h >> +++ b/include/linux/input/pixcir_ts.h >> @@ -58,6 +58,7 @@ struct pixcir_ts_platform_data { >> int x_max; >> int y_max; >> int gpio_attb; /* GPIO connected to ATTB line */ >> + int gpio_reset; /* GPIO connected to RESET line */ >> struct pixcir_i2c_chip_data chip; > > Declaring gpio_reset like this means that non-OF platforms will have it > as 0, which is usually a valid gpio number, which means they'll get a > nasty surprise when they update the driver. > > Maybe we should add a flag, or at least document that it should be set > to -1 if not available (since I do not see non-OF users in the tree)? > Yes, I'll add a note to set this to -1 for non-OF users. cheers, -roger -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt index 6e55109..8eb240a 100644 --- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt +++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt @@ -8,6 +8,9 @@ Required properties: - touchscreen-size-x: horizontal resolution of touchscreen (in pixels) - touchscreen-size-y: vertical resolution of touchscreen (in pixels) +Optional properties: +- reset-gpio: GPIO connected to the RESET line of the chip + Example: i2c@00000000 { diff --git a/drivers/input/touchscreen/pixcir_i2c_ts.c b/drivers/input/touchscreen/pixcir_i2c_ts.c index 4fb5537..610ce0b 100644 --- a/drivers/input/touchscreen/pixcir_i2c_ts.c +++ b/drivers/input/touchscreen/pixcir_i2c_ts.c @@ -51,6 +51,19 @@ struct pixcir_report_data { struct pixcir_touch touches[PIXCIR_MAX_SLOTS]; }; +static void pixcir_reset(struct pixcir_i2c_ts_data *tsdata) +{ + const struct pixcir_ts_platform_data *pdata = tsdata->pdata; + + if (gpio_is_valid(pdata->gpio_reset)) { + gpio_set_value(pdata->gpio_reset, 1); + ndelay(80); + gpio_set_value(pdata->gpio_reset, 0); + /* wait as controller might not immediately respond */ + msleep(100); + } +} + static void pixcir_ts_parse(struct pixcir_i2c_ts_data *tsdata, struct pixcir_report_data *report) { @@ -428,7 +441,8 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) pdata->chip = *(const struct pixcir_i2c_chip_data *)match->data; pdata->gpio_attb = of_get_named_gpio(np, "attb-gpio", 0); - /* gpio_attb validity is checked in probe */ + pdata->gpio_reset = of_get_named_gpio(np, "reset-gpio", 0); + /* gpio validity is checked in probe */ if (of_property_read_u32(np, "touchscreen-size-x", &pdata->x_max)) { dev_err(dev, "Failed to get touchscreen-size-x property\n"); @@ -442,8 +456,9 @@ static struct pixcir_ts_platform_data *pixcir_parse_dt(struct device *dev) } pdata->y_max -= 1; - dev_dbg(dev, "%s: x %d, y %d, gpio %d\n", __func__, - pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb); + dev_dbg(dev, "%s: x %d, y %d, ATTB gpio %d, RESET gpio %d\n", __func__, + pdata->x_max + 1, pdata->y_max + 1, pdata->gpio_attb, + pdata->gpio_reset); return pdata; } @@ -481,6 +496,10 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, return -EINVAL; } + /* RESET gpio is optional */ + if (!gpio_is_valid(pdata->gpio_reset)) + dev_info(dev, "Invalid gpio_reset in pdata\n"); + if (!pdata->chip.max_fingers) { dev_err(dev, "Invalid max_fingers in pdata\n"); return -EINVAL; @@ -530,6 +549,16 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, input_set_drvdata(input, tsdata); + if (gpio_is_valid(pdata->gpio_reset)) { + error = devm_gpio_request_one(dev, pdata->gpio_reset, + GPIOF_OUT_INIT_LOW, + "pixcir_i2c_reset"); + if (error) { + dev_err(dev, "Failed to request RESET gpio\n"); + return error; + } + } + error = devm_gpio_request_one(dev, pdata->gpio_attb, GPIOF_DIR_IN, "pixcir_i2c_attb"); if (error) { @@ -545,6 +574,8 @@ static int pixcir_i2c_ts_probe(struct i2c_client *client, return error; } + pixcir_reset(tsdata); + /* Always be in IDLE mode to save power, device supports auto wake */ error = pixcir_set_power_mode(tsdata, PIXCIR_POWER_IDLE); if (error) { diff --git a/include/linux/input/pixcir_ts.h b/include/linux/input/pixcir_ts.h index 7bae83b..9e91fd3 100644 --- a/include/linux/input/pixcir_ts.h +++ b/include/linux/input/pixcir_ts.h @@ -58,6 +58,7 @@ struct pixcir_ts_platform_data { int x_max; int y_max; int gpio_attb; /* GPIO connected to ATTB line */ + int gpio_reset; /* GPIO connected to RESET line */ struct pixcir_i2c_chip_data chip; };
The controller has a RESET pin which is usually controlled over a GPIO line. If such a GPIO is provided, perform a RESET during probe. Signed-off-by: Roger Quadros <rogerq@ti.com> --- .../bindings/input/touchscreen/pixcir_i2c_ts.txt | 3 ++ drivers/input/touchscreen/pixcir_i2c_ts.c | 37 ++++++++++++++++++++-- include/linux/input/pixcir_ts.h | 1 + 3 files changed, 38 insertions(+), 3 deletions(-)