| Message ID | 1427124541-27509-1-git-send-email-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Mon, Mar 23, 2015 at 04:29:01PM +0100, Linus Walleij wrote: > This strips the STMPE touchscreen input driver to only probe > and acquire its configuration from the device tree. No in-kernel > platforms use the static platform data so there is no point in > keeping it around. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > Dmitry if you can ACK this I think it is best of it's going in > through Lee's MFD tree with some other cleanups. Sure, no problem. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> > --- > drivers/input/touchscreen/stmpe-ts.c | 86 +++++++++++++++++++++--------------- > include/linux/mfd/stmpe.h | 43 ------------------ > 2 files changed, 51 insertions(+), 78 deletions(-) > > diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c > index 2d5ff86b343f..88a4bc0787c9 100644 > --- a/drivers/input/touchscreen/stmpe-ts.c > +++ b/drivers/input/touchscreen/stmpe-ts.c > @@ -63,6 +63,38 @@ > #define STMPE_TS_NAME "stmpe-ts" > #define XY_MASK 0xfff > > +/** > + * struct stmpe_touch - stmpe811 touch screen controller state > + * @stmpe: pointer back to STMPE MFD container > + * @idev: registered input device > + * @work: a work item used to scan the device > + * @dev: a pointer back to the MFD cell struct device* > + * @sample_time: ADC converstion time in number of clock. > + * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, > + * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), > + * recommended is 4. > + * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) > + * @ref_sel: ADC reference source > + * (0 -> internal reference, 1 -> external reference) > + * @adc_freq: ADC Clock speed > + * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) > + * @ave_ctrl: Sample average control > + * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) > + * @touch_det_delay: Touch detect interrupt delay > + * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, > + * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) > + * recommended is 3 > + * @settling: Panel driver settling time > + * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, > + * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) > + * recommended is 2 > + * @fraction_z: Length of the fractional part in z > + * (fraction_z ([0..7]) = Count of the fractional part) > + * recommended is 7 > + * @i_drive: current limit value of the touchscreen drivers > + * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) > + * > + */ > struct stmpe_touch { > struct stmpe *stmpe; > struct input_dev *idev; > @@ -269,44 +301,28 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev, > { > struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); > struct device_node *np = pdev->dev.of_node; > - struct stmpe_ts_platform_data *ts_pdata = NULL; > + u32 val; > > ts->stmpe = stmpe; > > - if (stmpe->pdata && stmpe->pdata->ts) { > - ts_pdata = stmpe->pdata->ts; > - > - ts->sample_time = ts_pdata->sample_time; > - ts->mod_12b = ts_pdata->mod_12b; > - ts->ref_sel = ts_pdata->ref_sel; > - ts->adc_freq = ts_pdata->adc_freq; > - ts->ave_ctrl = ts_pdata->ave_ctrl; > - ts->touch_det_delay = ts_pdata->touch_det_delay; > - ts->settling = ts_pdata->settling; > - ts->fraction_z = ts_pdata->fraction_z; > - ts->i_drive = ts_pdata->i_drive; > - } else if (np) { > - u32 val; > - > - if (!of_property_read_u32(np, "st,sample-time", &val)) > - ts->sample_time = val; > - if (!of_property_read_u32(np, "st,mod-12b", &val)) > - ts->mod_12b = val; > - if (!of_property_read_u32(np, "st,ref-sel", &val)) > - ts->ref_sel = val; > - if (!of_property_read_u32(np, "st,adc-freq", &val)) > - ts->adc_freq = val; > - if (!of_property_read_u32(np, "st,ave-ctrl", &val)) > - ts->ave_ctrl = val; > - if (!of_property_read_u32(np, "st,touch-det-delay", &val)) > - ts->touch_det_delay = val; > - if (!of_property_read_u32(np, "st,settling", &val)) > - ts->settling = val; > - if (!of_property_read_u32(np, "st,fraction-z", &val)) > - ts->fraction_z = val; > - if (!of_property_read_u32(np, "st,i-drive", &val)) > - ts->i_drive = val; > - } > + if (!of_property_read_u32(np, "st,sample-time", &val)) > + ts->sample_time = val; > + if (!of_property_read_u32(np, "st,mod-12b", &val)) > + ts->mod_12b = val; > + if (!of_property_read_u32(np, "st,ref-sel", &val)) > + ts->ref_sel = val; > + if (!of_property_read_u32(np, "st,adc-freq", &val)) > + ts->adc_freq = val; > + if (!of_property_read_u32(np, "st,ave-ctrl", &val)) > + ts->ave_ctrl = val; > + if (!of_property_read_u32(np, "st,touch-det-delay", &val)) > + ts->touch_det_delay = val; > + if (!of_property_read_u32(np, "st,settling", &val)) > + ts->settling = val; > + if (!of_property_read_u32(np, "st,fraction-z", &val)) > + ts->fraction_z = val; > + if (!of_property_read_u32(np, "st,i-drive", &val)) > + ts->i_drive = val; > } > > static int stmpe_input_probe(struct platform_device *pdev) > diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h > index c9d869027300..93e62ae32906 100644 > --- a/include/linux/mfd/stmpe.h > +++ b/include/linux/mfd/stmpe.h > @@ -117,46 +117,6 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); > > #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0) > > -/** > - * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform > - * data > - * @sample_time: ADC converstion time in number of clock. > - * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, > - * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), > - * recommended is 4. > - * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) > - * @ref_sel: ADC reference source > - * (0 -> internal reference, 1 -> external reference) > - * @adc_freq: ADC Clock speed > - * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) > - * @ave_ctrl: Sample average control > - * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) > - * @touch_det_delay: Touch detect interrupt delay > - * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, > - * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) > - * recommended is 3 > - * @settling: Panel driver settling time > - * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, > - * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) > - * recommended is 2 > - * @fraction_z: Length of the fractional part in z > - * (fraction_z ([0..7]) = Count of the fractional part) > - * recommended is 7 > - * @i_drive: current limit value of the touchscreen drivers > - * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) > - * > - * */ > -struct stmpe_ts_platform_data { > - u8 sample_time; > - u8 mod_12b; > - u8 ref_sel; > - u8 adc_freq; > - u8 ave_ctrl; > - u8 touch_det_delay; > - u8 settling; > - u8 fraction_z; > - u8 i_drive; > -}; > > /** > * struct stmpe_platform_data - STMPE platform data > @@ -168,7 +128,6 @@ struct stmpe_ts_platform_data { > * @irq_over_gpio: true if gpio is used to get irq > * @irq_gpio: gpio number over which irq will be requested (significant only if > * irq_over_gpio is true) > - * @ts: touchscreen-specific platform data > */ > struct stmpe_platform_data { > int id; > @@ -178,8 +137,6 @@ struct stmpe_platform_data { > bool irq_over_gpio; > int irq_gpio; > int autosleep_timeout; > - > - struct stmpe_ts_platform_data *ts; > }; > > #endif > -- > 1.9.3 >
On Mon, 23 Mar 2015, Linus Walleij wrote: > This strips the STMPE touchscreen input driver to only probe > and acquire its configuration from the device tree. No in-kernel > platforms use the static platform data so there is no point in > keeping it around. > > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > Dmitry if you can ACK this I think it is best of it's going in > through Lee's MFD tree with some other cleanups. That's find by me. For my own reference (so I don't have to re-review): Acked-by: Lee Jones <lee.jones@linaro.org> > --- > drivers/input/touchscreen/stmpe-ts.c | 86 +++++++++++++++++++++--------------- > include/linux/mfd/stmpe.h | 43 ------------------ > 2 files changed, 51 insertions(+), 78 deletions(-) > > diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c > index 2d5ff86b343f..88a4bc0787c9 100644 > --- a/drivers/input/touchscreen/stmpe-ts.c > +++ b/drivers/input/touchscreen/stmpe-ts.c > @@ -63,6 +63,38 @@ > #define STMPE_TS_NAME "stmpe-ts" > #define XY_MASK 0xfff > > +/** > + * struct stmpe_touch - stmpe811 touch screen controller state > + * @stmpe: pointer back to STMPE MFD container > + * @idev: registered input device > + * @work: a work item used to scan the device > + * @dev: a pointer back to the MFD cell struct device* > + * @sample_time: ADC converstion time in number of clock. > + * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, > + * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), > + * recommended is 4. > + * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) > + * @ref_sel: ADC reference source > + * (0 -> internal reference, 1 -> external reference) > + * @adc_freq: ADC Clock speed > + * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) > + * @ave_ctrl: Sample average control > + * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) > + * @touch_det_delay: Touch detect interrupt delay > + * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, > + * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) > + * recommended is 3 > + * @settling: Panel driver settling time > + * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, > + * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) > + * recommended is 2 > + * @fraction_z: Length of the fractional part in z > + * (fraction_z ([0..7]) = Count of the fractional part) > + * recommended is 7 > + * @i_drive: current limit value of the touchscreen drivers > + * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) > + * > + */ > struct stmpe_touch { > struct stmpe *stmpe; > struct input_dev *idev; > @@ -269,44 +301,28 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev, > { > struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); > struct device_node *np = pdev->dev.of_node; > - struct stmpe_ts_platform_data *ts_pdata = NULL; > + u32 val; > > ts->stmpe = stmpe; > > - if (stmpe->pdata && stmpe->pdata->ts) { > - ts_pdata = stmpe->pdata->ts; > - > - ts->sample_time = ts_pdata->sample_time; > - ts->mod_12b = ts_pdata->mod_12b; > - ts->ref_sel = ts_pdata->ref_sel; > - ts->adc_freq = ts_pdata->adc_freq; > - ts->ave_ctrl = ts_pdata->ave_ctrl; > - ts->touch_det_delay = ts_pdata->touch_det_delay; > - ts->settling = ts_pdata->settling; > - ts->fraction_z = ts_pdata->fraction_z; > - ts->i_drive = ts_pdata->i_drive; > - } else if (np) { > - u32 val; > - > - if (!of_property_read_u32(np, "st,sample-time", &val)) > - ts->sample_time = val; > - if (!of_property_read_u32(np, "st,mod-12b", &val)) > - ts->mod_12b = val; > - if (!of_property_read_u32(np, "st,ref-sel", &val)) > - ts->ref_sel = val; > - if (!of_property_read_u32(np, "st,adc-freq", &val)) > - ts->adc_freq = val; > - if (!of_property_read_u32(np, "st,ave-ctrl", &val)) > - ts->ave_ctrl = val; > - if (!of_property_read_u32(np, "st,touch-det-delay", &val)) > - ts->touch_det_delay = val; > - if (!of_property_read_u32(np, "st,settling", &val)) > - ts->settling = val; > - if (!of_property_read_u32(np, "st,fraction-z", &val)) > - ts->fraction_z = val; > - if (!of_property_read_u32(np, "st,i-drive", &val)) > - ts->i_drive = val; > - } > + if (!of_property_read_u32(np, "st,sample-time", &val)) > + ts->sample_time = val; > + if (!of_property_read_u32(np, "st,mod-12b", &val)) > + ts->mod_12b = val; > + if (!of_property_read_u32(np, "st,ref-sel", &val)) > + ts->ref_sel = val; > + if (!of_property_read_u32(np, "st,adc-freq", &val)) > + ts->adc_freq = val; > + if (!of_property_read_u32(np, "st,ave-ctrl", &val)) > + ts->ave_ctrl = val; > + if (!of_property_read_u32(np, "st,touch-det-delay", &val)) > + ts->touch_det_delay = val; > + if (!of_property_read_u32(np, "st,settling", &val)) > + ts->settling = val; > + if (!of_property_read_u32(np, "st,fraction-z", &val)) > + ts->fraction_z = val; > + if (!of_property_read_u32(np, "st,i-drive", &val)) > + ts->i_drive = val; > } > > static int stmpe_input_probe(struct platform_device *pdev) > diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h > index c9d869027300..93e62ae32906 100644 > --- a/include/linux/mfd/stmpe.h > +++ b/include/linux/mfd/stmpe.h > @@ -117,46 +117,6 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); > > #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0) > > -/** > - * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform > - * data > - * @sample_time: ADC converstion time in number of clock. > - * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, > - * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), > - * recommended is 4. > - * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) > - * @ref_sel: ADC reference source > - * (0 -> internal reference, 1 -> external reference) > - * @adc_freq: ADC Clock speed > - * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) > - * @ave_ctrl: Sample average control > - * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) > - * @touch_det_delay: Touch detect interrupt delay > - * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, > - * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) > - * recommended is 3 > - * @settling: Panel driver settling time > - * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, > - * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) > - * recommended is 2 > - * @fraction_z: Length of the fractional part in z > - * (fraction_z ([0..7]) = Count of the fractional part) > - * recommended is 7 > - * @i_drive: current limit value of the touchscreen drivers > - * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) > - * > - * */ > -struct stmpe_ts_platform_data { > - u8 sample_time; > - u8 mod_12b; > - u8 ref_sel; > - u8 adc_freq; > - u8 ave_ctrl; > - u8 touch_det_delay; > - u8 settling; > - u8 fraction_z; > - u8 i_drive; > -}; > > /** > * struct stmpe_platform_data - STMPE platform data > @@ -168,7 +128,6 @@ struct stmpe_ts_platform_data { > * @irq_over_gpio: true if gpio is used to get irq > * @irq_gpio: gpio number over which irq will be requested (significant only if > * irq_over_gpio is true) > - * @ts: touchscreen-specific platform data > */ > struct stmpe_platform_data { > int id; > @@ -178,8 +137,6 @@ struct stmpe_platform_data { > bool irq_over_gpio; > int irq_gpio; > int autosleep_timeout; > - > - struct stmpe_ts_platform_data *ts; > }; > > #endif
diff --git a/drivers/input/touchscreen/stmpe-ts.c b/drivers/input/touchscreen/stmpe-ts.c index 2d5ff86b343f..88a4bc0787c9 100644 --- a/drivers/input/touchscreen/stmpe-ts.c +++ b/drivers/input/touchscreen/stmpe-ts.c @@ -63,6 +63,38 @@ #define STMPE_TS_NAME "stmpe-ts" #define XY_MASK 0xfff +/** + * struct stmpe_touch - stmpe811 touch screen controller state + * @stmpe: pointer back to STMPE MFD container + * @idev: registered input device + * @work: a work item used to scan the device + * @dev: a pointer back to the MFD cell struct device* + * @sample_time: ADC converstion time in number of clock. + * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, + * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), + * recommended is 4. + * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) + * @ref_sel: ADC reference source + * (0 -> internal reference, 1 -> external reference) + * @adc_freq: ADC Clock speed + * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) + * @ave_ctrl: Sample average control + * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) + * @touch_det_delay: Touch detect interrupt delay + * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, + * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) + * recommended is 3 + * @settling: Panel driver settling time + * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, + * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) + * recommended is 2 + * @fraction_z: Length of the fractional part in z + * (fraction_z ([0..7]) = Count of the fractional part) + * recommended is 7 + * @i_drive: current limit value of the touchscreen drivers + * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) + * + */ struct stmpe_touch { struct stmpe *stmpe; struct input_dev *idev; @@ -269,44 +301,28 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev, { struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); struct device_node *np = pdev->dev.of_node; - struct stmpe_ts_platform_data *ts_pdata = NULL; + u32 val; ts->stmpe = stmpe; - if (stmpe->pdata && stmpe->pdata->ts) { - ts_pdata = stmpe->pdata->ts; - - ts->sample_time = ts_pdata->sample_time; - ts->mod_12b = ts_pdata->mod_12b; - ts->ref_sel = ts_pdata->ref_sel; - ts->adc_freq = ts_pdata->adc_freq; - ts->ave_ctrl = ts_pdata->ave_ctrl; - ts->touch_det_delay = ts_pdata->touch_det_delay; - ts->settling = ts_pdata->settling; - ts->fraction_z = ts_pdata->fraction_z; - ts->i_drive = ts_pdata->i_drive; - } else if (np) { - u32 val; - - if (!of_property_read_u32(np, "st,sample-time", &val)) - ts->sample_time = val; - if (!of_property_read_u32(np, "st,mod-12b", &val)) - ts->mod_12b = val; - if (!of_property_read_u32(np, "st,ref-sel", &val)) - ts->ref_sel = val; - if (!of_property_read_u32(np, "st,adc-freq", &val)) - ts->adc_freq = val; - if (!of_property_read_u32(np, "st,ave-ctrl", &val)) - ts->ave_ctrl = val; - if (!of_property_read_u32(np, "st,touch-det-delay", &val)) - ts->touch_det_delay = val; - if (!of_property_read_u32(np, "st,settling", &val)) - ts->settling = val; - if (!of_property_read_u32(np, "st,fraction-z", &val)) - ts->fraction_z = val; - if (!of_property_read_u32(np, "st,i-drive", &val)) - ts->i_drive = val; - } + if (!of_property_read_u32(np, "st,sample-time", &val)) + ts->sample_time = val; + if (!of_property_read_u32(np, "st,mod-12b", &val)) + ts->mod_12b = val; + if (!of_property_read_u32(np, "st,ref-sel", &val)) + ts->ref_sel = val; + if (!of_property_read_u32(np, "st,adc-freq", &val)) + ts->adc_freq = val; + if (!of_property_read_u32(np, "st,ave-ctrl", &val)) + ts->ave_ctrl = val; + if (!of_property_read_u32(np, "st,touch-det-delay", &val)) + ts->touch_det_delay = val; + if (!of_property_read_u32(np, "st,settling", &val)) + ts->settling = val; + if (!of_property_read_u32(np, "st,fraction-z", &val)) + ts->fraction_z = val; + if (!of_property_read_u32(np, "st,i-drive", &val)) + ts->i_drive = val; } static int stmpe_input_probe(struct platform_device *pdev) diff --git a/include/linux/mfd/stmpe.h b/include/linux/mfd/stmpe.h index c9d869027300..93e62ae32906 100644 --- a/include/linux/mfd/stmpe.h +++ b/include/linux/mfd/stmpe.h @@ -117,46 +117,6 @@ extern int stmpe_disable(struct stmpe *stmpe, unsigned int blocks); #define STMPE_GPIO_NOREQ_811_TOUCH (0xf0) -/** - * struct stmpe_ts_platform_data - stmpe811 touch screen controller platform - * data - * @sample_time: ADC converstion time in number of clock. - * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, - * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks), - * recommended is 4. - * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC) - * @ref_sel: ADC reference source - * (0 -> internal reference, 1 -> external reference) - * @adc_freq: ADC Clock speed - * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz) - * @ave_ctrl: Sample average control - * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples) - * @touch_det_delay: Touch detect interrupt delay - * (0 -> 10 us, 1 -> 50 us, 2 -> 100 us, 3 -> 500 us, - * 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) - * recommended is 3 - * @settling: Panel driver settling time - * (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3 -> 1 ms, - * 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) - * recommended is 2 - * @fraction_z: Length of the fractional part in z - * (fraction_z ([0..7]) = Count of the fractional part) - * recommended is 7 - * @i_drive: current limit value of the touchscreen drivers - * (0 -> 20 mA typical 35 mA max, 1 -> 50 mA typical 80 mA max) - * - * */ -struct stmpe_ts_platform_data { - u8 sample_time; - u8 mod_12b; - u8 ref_sel; - u8 adc_freq; - u8 ave_ctrl; - u8 touch_det_delay; - u8 settling; - u8 fraction_z; - u8 i_drive; -}; /** * struct stmpe_platform_data - STMPE platform data @@ -168,7 +128,6 @@ struct stmpe_ts_platform_data { * @irq_over_gpio: true if gpio is used to get irq * @irq_gpio: gpio number over which irq will be requested (significant only if * irq_over_gpio is true) - * @ts: touchscreen-specific platform data */ struct stmpe_platform_data { int id; @@ -178,8 +137,6 @@ struct stmpe_platform_data { bool irq_over_gpio; int irq_gpio; int autosleep_timeout; - - struct stmpe_ts_platform_data *ts; }; #endif
This strips the STMPE touchscreen input driver to only probe and acquire its configuration from the device tree. No in-kernel platforms use the static platform data so there is no point in keeping it around. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- Dmitry if you can ACK this I think it is best of it's going in through Lee's MFD tree with some other cleanups. --- drivers/input/touchscreen/stmpe-ts.c | 86 +++++++++++++++++++++--------------- include/linux/mfd/stmpe.h | 43 ------------------ 2 files changed, 51 insertions(+), 78 deletions(-)