@@ -181,7 +181,11 @@ static void wacom_usage_mapping(struct hid_device *hdev,
* X/Y values and some cases of invalid Digitizer X/Y
* values commonly reported.
*/
- if (!pen && !finger)
+ if (pen)
+ features->device_type = BTN_TOOL_PEN;
+ else if (finger)
+ features->device_type = BTN_TOOL_FINGER;
+ else
return;
/*
@@ -198,14 +202,11 @@ static void wacom_usage_mapping(struct hid_device *hdev,
case HID_GD_X:
features->x_max = field->logical_maximum;
if (finger) {
- features->device_type = BTN_TOOL_FINGER;
features->x_phy = field->physical_maximum;
if (features->type != BAMBOO_PT) {
features->unit = field->unit;
features->unitExpo = field->unit_exponent;
}
- } else {
- features->device_type = BTN_TOOL_PEN;
}
break;
case HID_GD_Y:
@@ -425,7 +426,6 @@ static void wacom_retrieve_hid_descriptor(struct hid_device *hdev,
struct usb_interface *intf = wacom->intf;
/* default features */
- features->device_type = BTN_TOOL_PEN;
features->x_fuzz = 4;
features->y_fuzz = 4;
features->pressure_fuzz = 0;
@@ -446,10 +446,6 @@ static void wacom_retrieve_hid_descriptor(struct hid_device *hdev,
}
}
- /* only devices that support touch need to retrieve the info */
- if (features->type < BAMBOO_PT)
- return;
-
wacom_parse_hid(hdev, features);
}
@@ -1529,8 +1525,15 @@ static int wacom_probe(struct hid_device *hdev,
/* Retrieve the physical and logical size for touch devices */
wacom_retrieve_hid_descriptor(hdev, features);
-
wacom_setup_device_quirks(wacom);
+
+ if (!features->device_type && features->type != WIRELESS) {
+ dev_warn(&hdev->dev, "Unknown device_type for '%s'. %s.",
+ hdev->name, "Assuming pen");
+
+ features->device_type = BTN_TOOL_PEN;
+ }
+
wacom_calculate_res(features);
wacom_update_name(wacom);
@@ -2186,13 +2186,15 @@ void wacom_setup_device_quirks(struct wacom *wacom)
features->x_max = 4096;
features->y_max = 4096;
- } else {
- features->device_type = BTN_TOOL_PEN;
}
}
/*
- * Same thing for Bamboo PAD
+ * Raw Wacom-mode pen and touch events both come from interface
+ * 0, whose HID descriptor has an application usage of 0xFF0D
+ * (i.e., WACOM_VENDORDEFINED_PEN). We route pen packets back
+ * out through the HID_GENERIC device created for interface 1,
+ * so rewrite this one to be of type BTN_TOOL_FINGER.
*/
if (features->type == BAMBOO_PAD)
features->device_type = BTN_TOOL_FINGER;
@@ -72,10 +72,14 @@
#define WACOM_QUIRK_MONITOR 0x0004
#define WACOM_QUIRK_BATTERY 0x0008
+#define WACOM_VENDORDEFINED_PEN 0xff0d0001
+
#define WACOM_PEN_FIELD(f) (((f)->logical == HID_DG_STYLUS) || \
((f)->physical == HID_DG_STYLUS) || \
((f)->physical == HID_DG_PEN) || \
- ((f)->application == HID_DG_PEN))
+ ((f)->application == HID_DG_PEN) || \
+ ((f)->application == HID_DG_DIGITIZER) || \
+ ((f)->application == WACOM_VENDORDEFINED_PEN))
#define WACOM_FINGER_FIELD(f) (((f)->logical == HID_DG_FINGER) || \
((f)->physical == HID_DG_FINGER) || \
((f)->application == HID_DG_TOUCHSCREEN))
Currently, we assume a device_type of BTN_TOOL_PEN before scanning the HID descriptor and then change the device_type if what we discover proves that assumption wrong. This way of doing things makes it more difficult to figure out if a device (particularly a HID_GENERIC device) actually does tablet/touch input or is something completley different. This patch leaves device_type at its initial value of 0 and then calls 'wacom_parse_hid' for every device (not just those that have touch). As we map the usages, we can set the device_type as before. After we're finished, we can then check if the value is still zero and do whatever is most appropriate. Detecting the pen can be a little tricky on most Wacom devices because the descriptors describe opaque blobs. Fortunately, older Wacom tablets have the HID_DG_DIGITIZER usage on the pen's application collection and newer tablets seem to have a similar vendor-defined usage that we can trigger on. Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com> --- drivers/hid/wacom_sys.c | 23 +++++++++++++---------- drivers/hid/wacom_wac.c | 8 +++++--- drivers/hid/wacom_wac.h | 6 +++++- 3 files changed, 23 insertions(+), 14 deletions(-)