[v3,3/9] regulator: max77693: Support different register configurations

Commit Message

Krzysztof Kozlowski July 8, 2015, 11 a.m. UTC

Add support for different configurations of charger's registers so the
same driver could be used on other devices (e.g. MAX77843).

Signed-off-by: Krzysztof Kozlowski <[e-mail]>
Acked-by: Mark Brown <[e-mail]>
---
 drivers/regulator/max77693.c | 39 +++++++++++++++++++++++++++------------
 1 file changed, 27 insertions(+), 12 deletions(-)

Patch

diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c
index 38722c8311a5..236851ab575a 100644
--- a/drivers/regulator/max77693.c
+++ b/drivers/regulator/max77693.c
@@ -33,7 +33,13 @@ 
 #include <linux/regulator/of_regulator.h>
 #include <linux/regmap.h>
 
-#define CHGIN_ILIM_STEP_20mA			20000
+/* Charger regulator differences between MAX77693 and MAX77843 */
+struct chg_reg_data {
+	unsigned int linear_reg;
+	unsigned int linear_mask;
+	unsigned int uA_step;
+	unsigned int min_sel;
+};
 
 /*
  * CHARGER regulator - Min : 20mA, Max : 2580mA, step : 20mA
@@ -42,25 +48,26 @@ 
  */
 static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
 {
+	const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
 	unsigned int chg_min_uA = rdev->constraints->min_uA;
 	unsigned int chg_max_uA = rdev->constraints->max_uA;
 	unsigned int reg, sel;
 	unsigned int val;
 	int ret;
 
-	ret = regmap_read(rdev->regmap, MAX77693_CHG_REG_CHG_CNFG_09, &reg);
+	ret = regmap_read(rdev->regmap, reg_data->linear_reg, &reg);
 	if (ret < 0)
 		return ret;
 
-	sel = reg & CHG_CNFG_09_CHGIN_ILIM_MASK;
+	sel = reg & reg_data->linear_mask;
 
 	/* the first four codes for charger current are all 60mA */
-	if (sel <= 3)
+	if (sel <= reg_data->min_sel)
 		sel = 0;
 	else
-		sel -= 3;
+		sel -= reg_data->min_sel;
 
-	val = chg_min_uA + CHGIN_ILIM_STEP_20mA * sel;
+	val = chg_min_uA + reg_data->uA_step * sel;
 	if (val > chg_max_uA)
 		return -EINVAL;
 
@@ -70,20 +77,20 @@  static int max77693_chg_get_current_limit(struct regulator_dev *rdev)
 static int max77693_chg_set_current_limit(struct regulator_dev *rdev,
 						int min_uA, int max_uA)
 {
+	const struct chg_reg_data *reg_data = rdev_get_drvdata(rdev);
 	unsigned int chg_min_uA = rdev->constraints->min_uA;
 	int sel = 0;
 
-	while (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel < min_uA)
+	while (chg_min_uA + reg_data->uA_step * sel < min_uA)
 		sel++;
 
-	if (chg_min_uA + CHGIN_ILIM_STEP_20mA * sel > max_uA)
+	if (chg_min_uA + reg_data->uA_step * sel > max_uA)
 		return -EINVAL;
 
 	/* the first four codes for charger current are all 60mA */
-	sel += 3;
+	sel += reg_data->min_sel;
 
-	return regmap_write(rdev->regmap,
-				MAX77693_CHG_REG_CHG_CNFG_09, sel);
+	return regmap_write(rdev->regmap, reg_data->linear_reg, sel);
 }
 /* end of CHARGER regulator ops */
 
@@ -145,6 +152,13 @@  static const struct regulator_desc regulators[] = {
 	},
 };
 
+static const struct chg_reg_data max77693_chg_reg_data = {
+	.linear_reg	= MAX77693_CHG_REG_CHG_CNFG_09,
+	.linear_mask	= CHG_CNFG_09_CHGIN_ILIM_MASK,
+	.uA_step	= 20000,
+	.min_sel	= 3,
+};
+
 static int max77693_pmic_probe(struct platform_device *pdev)
 {
 	struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
@@ -153,6 +167,7 @@  static int max77693_pmic_probe(struct platform_device *pdev)
 
 	config.dev = iodev->dev;
 	config.regmap = iodev->regmap;
+	config.driver_data = (void *)&max77693_chg_reg_data;
 
 	for (i = 0; i < ARRAY_SIZE(regulators); i++) {
 		struct regulator_dev *rdev;
@@ -170,7 +185,7 @@  static int max77693_pmic_probe(struct platform_device *pdev)
 }
 
 static const struct platform_device_id max77693_pmic_id[] = {
-	{"max77693-pmic", 0},
+	{ "max77693-pmic", TYPE_MAX77693 },
 	{},
 };