diff --git a/drivers/input/Kconfig b/drivers/input/Kconfig
index a35532e..6261874 100644
--- a/drivers/input/Kconfig
+++ b/drivers/input/Kconfig
@@ -201,6 +201,8 @@ source "drivers/input/touchscreen/Kconfig"
 
 source "drivers/input/misc/Kconfig"
 
+source "drivers/input/rmi4/Kconfig"
+
 endif
 
 menu "Hardware I/O ports"
diff --git a/drivers/input/Makefile b/drivers/input/Makefile
index 0c9302c..595820b 100644
--- a/drivers/input/Makefile
+++ b/drivers/input/Makefile
@@ -26,3 +26,5 @@ obj-$(CONFIG_INPUT_TOUCHSCREEN)	+= touchscreen/
 obj-$(CONFIG_INPUT_MISC)	+= misc/
 
 obj-$(CONFIG_INPUT_APMPOWER)	+= apm-power.o
+
+obj-$(CONFIG_RMI4_CORE)		+= rmi4/
diff --git a/drivers/input/rmi4/Kconfig b/drivers/input/rmi4/Kconfig
new file mode 100644
index 0000000..75ce185
--- /dev/null
+++ b/drivers/input/rmi4/Kconfig
@@ -0,0 +1,12 @@
+#
+# RMI4 configuration
+#
+config RMI4_CORE
+	tristate "Synaptics RMI4 bus support"
+	help
+	  Say Y here if you want to support the Synaptics RMI4 bus.  This is
+	  required for all RMI4 device support.
+
+	  If unsure, say Y.
+
+	  This feature is not currently available as a loadable module.
diff --git a/drivers/input/rmi4/Makefile b/drivers/input/rmi4/Makefile
new file mode 100644
index 0000000..12f2197
--- /dev/null
+++ b/drivers/input/rmi4/Makefile
@@ -0,0 +1,2 @@
+obj-$(CONFIG_RMI4_CORE) += rmi_core.o
+rmi_core-y := rmi_bus.o rmi_driver.o rmi_f01.o
diff --git a/drivers/input/rmi4/rmi_bus.c b/drivers/input/rmi4/rmi_bus.c
new file mode 100644
index 0000000..e7dcd39
--- /dev/null
+++ b/drivers/input/rmi4/rmi_bus.c
@@ -0,0 +1,378 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/kconfig.h>
+#include <linux/list.h>
+#include <linux/pm.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/of.h>
+#include "rmi_bus.h"
+#include "rmi_driver.h"
+
+int debug_flags;
+module_param(debug_flags, int, 0444);
+MODULE_PARM_DESC(debug_flags, "control debugging information");
+
+void rmi_dbg(int flags, struct device *dev, const char *fmt, ...)
+{
+	struct va_format vaf;
+	va_list args;
+
+	if (flags & debug_flags) {
+		va_start(args, fmt);
+
+		vaf.fmt = fmt;
+		vaf.va = &args;
+
+		dev_printk(KERN_DEBUG, dev, "%pV", &vaf);
+
+		va_end(args);
+	}
+}
+EXPORT_SYMBOL_GPL(rmi_dbg);
+
+/*
+ * RMI Physical devices
+ *
+ * Physical RMI device consists of several functions serving particular
+ * purpose. For example F11 is a 2D touch sensor while F01 is a generic
+ * function present in every RMI device.
+ */
+
+static void rmi_release_device(struct device *dev)
+{
+	struct rmi_device *rmi_dev = to_rmi_device(dev);
+
+	kfree(rmi_dev);
+}
+
+static struct device_type rmi_device_type = {
+	.name		= "rmi4_sensor",
+	.release	= rmi_release_device,
+};
+
+bool rmi_is_physical_device(struct device *dev)
+{
+	return dev->type == &rmi_device_type;
+}
+
+/**
+ * rmi_register_transport_device - register a transport device connection
+ * on the RMI bus.  Transport drivers provide communication from the devices
+ * on a bus (such as SPI, I2C, and so on) to the RMI4 sensor.
+ *
+ * @xport: the transport device to register
+ */
+int rmi_register_transport_device(struct rmi_transport_dev *xport)
+{
+	static atomic_t transport_device_count = ATOMIC_INIT(0);
+	struct rmi_device *rmi_dev;
+	int error;
+
+	rmi_dev = kzalloc(sizeof(struct rmi_device), GFP_KERNEL);
+	if (!rmi_dev)
+		return -ENOMEM;
+
+	device_initialize(&rmi_dev->dev);
+
+	rmi_dev->xport = xport;
+	rmi_dev->number = atomic_inc_return(&transport_device_count) - 1;
+
+	dev_set_name(&rmi_dev->dev, "rmi4-%02d", rmi_dev->number);
+
+	rmi_dev->dev.bus = &rmi_bus_type;
+	rmi_dev->dev.type = &rmi_device_type;
+
+	xport->rmi_dev = rmi_dev;
+
+	error = device_add(&rmi_dev->dev);
+	if (error)
+		goto err_put_device;
+
+	rmi_dbg(RMI_DEBUG_CORE, xport->dev,
+		"%s: Registered %s as %s.\n", __func__,
+		dev_name(rmi_dev->xport->dev), dev_name(&rmi_dev->dev));
+
+	return 0;
+
+err_put_device:
+	put_device(&rmi_dev->dev);
+	return error;
+}
+EXPORT_SYMBOL_GPL(rmi_register_transport_device);
+
+/**
+ * rmi_unregister_transport_device - unregister a transport device connection
+ * @xport: the transport driver to unregister
+ *
+ */
+void rmi_unregister_transport_device(struct rmi_transport_dev *xport)
+{
+	struct rmi_device *rmi_dev = xport->rmi_dev;
+
+	device_del(&rmi_dev->dev);
+	put_device(&rmi_dev->dev);
+}
+EXPORT_SYMBOL(rmi_unregister_transport_device);
+
+
+/* Function specific stuff */
+
+static void rmi_release_function(struct device *dev)
+{
+	struct rmi_function *fn = to_rmi_function(dev);
+
+	kfree(fn);
+}
+
+static struct device_type rmi_function_type = {
+	.name		= "rmi4_function",
+	.release	= rmi_release_function,
+};
+
+bool rmi_is_function_device(struct device *dev)
+{
+	return dev->type == &rmi_function_type;
+}
+
+static int rmi_function_match(struct device *dev, struct device_driver *drv)
+{
+	struct rmi_function_handler *handler = to_rmi_function_handler(drv);
+	struct rmi_function *fn = to_rmi_function(dev);
+
+	return fn->fd.function_number == handler->func;
+}
+
+static int rmi_function_probe(struct device *dev)
+{
+	struct rmi_function *fn = to_rmi_function(dev);
+	struct rmi_function_handler *handler =
+					to_rmi_function_handler(dev->driver);
+	int error;
+
+	if (handler->probe) {
+		error = handler->probe(fn);
+		return error;
+	}
+
+	return 0;
+}
+
+static int rmi_function_remove(struct device *dev)
+{
+	struct rmi_function *fn = to_rmi_function(dev);
+	struct rmi_function_handler *handler =
+					to_rmi_function_handler(dev->driver);
+
+	if (handler->remove)
+		handler->remove(fn);
+
+	return 0;
+}
+
+int rmi_register_function(struct rmi_function *fn)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	int error;
+
+	device_initialize(&fn->dev);
+
+	dev_set_name(&fn->dev, "%s.fn%02x",
+		     dev_name(&rmi_dev->dev), fn->fd.function_number);
+
+	fn->dev.parent = &rmi_dev->dev;
+	fn->dev.type = &rmi_function_type;
+	fn->dev.bus = &rmi_bus_type;
+
+	error = device_add(&fn->dev);
+	if (error) {
+		dev_err(&rmi_dev->dev,
+			"Failed device_register function device %s\n",
+			dev_name(&fn->dev));
+		goto err_put_device;
+	}
+
+	rmi_dbg(RMI_DEBUG_CORE, &rmi_dev->dev, "Registered F%02X.\n",
+			fn->fd.function_number);
+
+	return 0;
+
+err_put_device:
+	put_device(&fn->dev);
+	return error;
+}
+
+void rmi_unregister_function(struct rmi_function *fn)
+{
+	device_del(&fn->dev);
+
+	if (fn->dev.of_node)
+		of_node_put(fn->dev.of_node);
+
+	put_device(&fn->dev);
+}
+
+/**
+ * rmi_register_function_handler - register a handler for an RMI function
+ * @handler: RMI handler that should be registered.
+ * @module: pointer to module that implements the handler
+ * @mod_name: name of the module implementing the handler
+ *
+ * This function performs additional setup of RMI function handler and
+ * registers it with the RMI core so that it can be bound to
+ * RMI function devices.
+ */
+int __rmi_register_function_handler(struct rmi_function_handler *handler,
+				     struct module *owner,
+				     const char *mod_name)
+{
+	struct device_driver *driver = &handler->driver;
+	int error;
+
+	driver->bus = &rmi_bus_type;
+	driver->owner = owner;
+	driver->mod_name = mod_name;
+	driver->probe = rmi_function_probe;
+	driver->remove = rmi_function_remove;
+
+	error = driver_register(&handler->driver);
+	if (error) {
+		pr_err("driver_register() failed for %s, error: %d\n",
+			handler->driver.name, error);
+		return error;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(__rmi_register_function_handler);
+
+/**
+ * rmi_unregister_function_handler - unregister given RMI function handler
+ * @handler: RMI handler that should be unregistered.
+ *
+ * This function unregisters given function handler from RMI core which
+ * causes it to be unbound from the function devices.
+ */
+void rmi_unregister_function_handler(struct rmi_function_handler *handler)
+{
+	driver_unregister(&handler->driver);
+}
+EXPORT_SYMBOL_GPL(rmi_unregister_function_handler);
+
+/* Bus specific stuff */
+
+static int rmi_bus_match(struct device *dev, struct device_driver *drv)
+{
+	bool physical = rmi_is_physical_device(dev);
+
+	/* First see if types are not compatible */
+	if (physical != rmi_is_physical_driver(drv))
+		return 0;
+
+	return physical || rmi_function_match(dev, drv);
+}
+
+struct bus_type rmi_bus_type = {
+	.match		= rmi_bus_match,
+	.name		= "rmi4",
+};
+
+static struct rmi_function_handler *fn_handlers[] = {
+	&rmi_f01_handler,
+};
+
+#define RMI_FN_HANDLER_ARRAY_SIZE \
+	(sizeof(fn_handlers) / sizeof(struct rmi_function_handler *))
+
+static void __rmi_unregister_function_handlers(int start_idx)
+{
+	int i;
+
+	for (i = start_idx; i >= 0; i--)
+		rmi_unregister_function_handler(fn_handlers[i]);
+}
+
+static void rmi_unregister_function_handlers(void)
+{
+	__rmi_unregister_function_handlers(RMI_FN_HANDLER_ARRAY_SIZE - 1);
+}
+
+static int rmi_register_function_handlers(void)
+{
+	int ret;
+	int i;
+
+	for (i = 0; i < RMI_FN_HANDLER_ARRAY_SIZE; i++)	{
+		ret = rmi_register_function_handler(fn_handlers[i]);
+		if (ret) {
+			pr_err("%s: error registering the RMI F%02x handler: %d\n",
+				__func__, fn_handlers[i]->func, ret);
+			goto err_unregister_function_handlers;
+		}
+	}
+
+	return 0;
+
+err_unregister_function_handlers:
+	__rmi_unregister_function_handlers(i - 1);
+	return ret;
+}
+
+static int __init rmi_bus_init(void)
+{
+	int error;
+
+	error = bus_register(&rmi_bus_type);
+	if (error) {
+		pr_err("%s: error registering the RMI bus: %d\n",
+			__func__, error);
+		return error;
+	}
+
+	error = rmi_register_function_handlers();
+	if (error)
+		goto err_unregister_bus;
+
+	error = rmi_register_physical_driver();
+	if (error) {
+		pr_err("%s: error registering the RMI physical driver: %d\n",
+			__func__, error);
+		goto err_unregister_bus;
+	}
+
+	return 0;
+
+err_unregister_bus:
+	bus_unregister(&rmi_bus_type);
+	return error;
+}
+module_init(rmi_bus_init);
+
+static void __exit rmi_bus_exit(void)
+{
+	/*
+	 * We should only ever get here if all drivers are unloaded, so
+	 * all we have to do at this point is unregister ourselves.
+	 */
+
+	rmi_unregister_physical_driver();
+	rmi_unregister_function_handlers();
+	bus_unregister(&rmi_bus_type);
+}
+module_exit(rmi_bus_exit);
+
+MODULE_AUTHOR("Christopher Heiny <cheiny@synaptics.com");
+MODULE_AUTHOR("Andrew Duggan <aduggan@synaptics.com");
+MODULE_DESCRIPTION("RMI bus");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(RMI_DRIVER_VERSION);
diff --git a/drivers/input/rmi4/rmi_bus.h b/drivers/input/rmi4/rmi_bus.h
new file mode 100644
index 0000000..64bb5d4
--- /dev/null
+++ b/drivers/input/rmi4/rmi_bus.h
@@ -0,0 +1,189 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _RMI_BUS_H
+#define _RMI_BUS_H
+
+#include <linux/rmi.h>
+
+struct rmi_device;
+
+/**
+ * struct rmi_function - represents the implementation of an RMI4
+ * function for a particular device (basically, a driver for that RMI4 function)
+ *
+ * @fd: The function descriptor of the RMI function
+ * @rmi_dev: Pointer to the RMI device associated with this function container
+ * @dev: The device associated with this particular function.
+ *
+ * @num_of_irqs: The number of irqs needed by this function
+ * @irq_pos: The position in the irq bitfield this function holds
+ * @irq_mask: For convience, can be used to mask IRQ bits off during ATTN
+ * interrupt handling.
+ * @data: Private data pointer
+ *
+ * @node: entry in device's list of functions
+ */
+struct rmi_function {
+	struct rmi_function_descriptor fd;
+	struct rmi_device *rmi_dev;
+	struct device dev;
+	struct list_head node;
+
+	unsigned int num_of_irqs;
+	unsigned int irq_pos;
+	unsigned long irq_mask[];
+};
+
+#define to_rmi_function(d)	container_of(d, struct rmi_function, dev)
+
+bool rmi_is_function_device(struct device *dev);
+
+int __must_check rmi_register_function(struct rmi_function *);
+void rmi_unregister_function(struct rmi_function *);
+
+/**
+ * struct rmi_function_handler - driver routines for a particular RMI function.
+ *
+ * @func: The RMI function number
+ * @reset: Called when a reset of the touch sensor is detected.  The routine
+ * should perform any out-of-the-ordinary reset handling that might be
+ * necessary.  Restoring of touch sensor configuration registers should be
+ * handled in the config() callback, below.
+ * @config: Called when the function container is first initialized, and
+ * after a reset is detected.  This routine should write any necessary
+ * configuration settings to the device.
+ * @attention: Called when the IRQ(s) for the function are set by the touch
+ * sensor.
+ * @suspend: Should perform any required operations to suspend the particular
+ * function.
+ * @resume: Should perform any required operations to resume the particular
+ * function.
+ *
+ * All callbacks are expected to return 0 on success, error code on failure.
+ */
+struct rmi_function_handler {
+	struct device_driver driver;
+
+	u8 func;
+
+	int (*probe)(struct rmi_function *fn);
+	void (*remove)(struct rmi_function *fn);
+	int (*config)(struct rmi_function *fn);
+	int (*reset)(struct rmi_function *fn);
+	int (*attention)(struct rmi_function *fn, unsigned long *irq_bits);
+	int (*suspend)(struct rmi_function *fn);
+	int (*resume)(struct rmi_function *fn);
+};
+
+#define to_rmi_function_handler(d) \
+		container_of(d, struct rmi_function_handler, driver)
+
+int __must_check __rmi_register_function_handler(struct rmi_function_handler *,
+						 struct module *, const char *);
+#define rmi_register_function_handler(handler) \
+	__rmi_register_function_handler(handler, THIS_MODULE, KBUILD_MODNAME)
+
+void rmi_unregister_function_handler(struct rmi_function_handler *);
+
+
+
+#define to_rmi_driver(d) \
+	container_of(d, struct rmi_driver, driver)
+
+#define to_rmi_device(d) container_of(d, struct rmi_device, dev)
+
+static inline struct rmi_device_platform_data *
+rmi_get_platform_data(struct rmi_device *d)
+{
+	return &d->xport->pdata;
+}
+
+bool rmi_is_physical_device(struct device *dev);
+
+/**
+ * rmi_read - read a single byte
+ * @d: Pointer to an RMI device
+ * @addr: The address to read from
+ * @buf: The read buffer
+ *
+ * Reads a single byte of data using the underlying transport protocol
+ * into memory pointed by @buf. It returns 0 on success or a negative
+ * error code.
+ */
+static inline int rmi_read(struct rmi_device *d, u16 addr, u8 *buf)
+{
+	return d->xport->ops->read_block(d->xport, addr, buf, 1);
+}
+
+/**
+ * rmi_read_block - read a block of bytes
+ * @d: Pointer to an RMI device
+ * @addr: The start address to read from
+ * @buf: The read buffer
+ * @len: Length of the read buffer
+ *
+ * Reads a block of byte data using the underlying transport protocol
+ * into memory pointed by @buf. It returns 0 on success or a negative
+ * error code.
+ */
+static inline int rmi_read_block(struct rmi_device *d, u16 addr,
+				 void *buf, size_t len)
+{
+	return d->xport->ops->read_block(d->xport, addr, buf, len);
+}
+
+/**
+ * rmi_write - write a single byte
+ * @d: Pointer to an RMI device
+ * @addr: The address to write to
+ * @data: The data to write
+ *
+ * Writes a single byte using the underlying transport protocol. It
+ * returns zero on success or a negative error code.
+ */
+static inline int rmi_write(struct rmi_device *d, u16 addr, u8 data)
+{
+	return d->xport->ops->write_block(d->xport, addr, &data, 1);
+}
+
+/**
+ * rmi_write_block - write a block of bytes
+ * @d: Pointer to an RMI device
+ * @addr: The start address to write to
+ * @buf: The write buffer
+ * @len: Length of the write buffer
+ *
+ * Writes a block of byte data from buf using the underlaying transport
+ * protocol.  It returns the amount of bytes written or a negative error code.
+ */
+static inline int rmi_write_block(struct rmi_device *d, u16 addr,
+				  const void *buf, size_t len)
+{
+	return d->xport->ops->write_block(d->xport, addr, buf, len);
+}
+
+int rmi_for_each_dev(void *data, int (*func)(struct device *dev, void *data));
+
+extern struct bus_type rmi_bus_type;
+
+int rmi_of_property_read_u32(struct device *dev, u32 *result,
+				const char *prop, bool optional);
+int rmi_of_property_read_u16(struct device *dev, u16 *result,
+				const char *prop, bool optional);
+int rmi_of_property_read_u8(struct device *dev, u8 *result,
+				const char *prop, bool optional);
+
+#define RMI_DEBUG_CORE			BIT(0)
+#define RMI_DEBUG_XPORT			BIT(1)
+#define RMI_DEBUG_FN			BIT(2)
+#define RMI_DEBUG_2D_SENSOR		BIT(3)
+
+void rmi_dbg(int flags, struct device *dev, const char *fmt, ...);
+#endif
diff --git a/drivers/input/rmi4/rmi_driver.c b/drivers/input/rmi4/rmi_driver.c
new file mode 100644
index 0000000..f8bb7e0
--- /dev/null
+++ b/drivers/input/rmi4/rmi_driver.c
@@ -0,0 +1,1024 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This driver provides the core support for a single RMI4-based device.
+ *
+ * The RMI4 specification can be found here (URL split for line length):
+ *
+ * http://www.synaptics.com/sites/default/files/
+ *      511-000136-01-Rev-E-RMI4-Interfacing-Guide.pdf
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/bitmap.h>
+#include <linux/delay.h>
+#include <linux/fs.h>
+#include <linux/kconfig.h>
+#include <linux/pm.h>
+#include <linux/slab.h>
+#include <uapi/linux/input.h>
+#include <linux/rmi.h>
+#include "rmi_bus.h"
+#include "rmi_driver.h"
+
+#define HAS_NONSTANDARD_PDT_MASK 0x40
+#define RMI4_MAX_PAGE 0xff
+#define RMI4_PAGE_SIZE 0x100
+#define RMI4_PAGE_MASK 0xFF00
+
+#define RMI_DEVICE_RESET_CMD	0x01
+#define DEFAULT_RESET_DELAY_MS	100
+
+static void rmi_free_function_list(struct rmi_device *rmi_dev)
+{
+	struct rmi_function *fn, *tmp;
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+
+	data->f01_container = NULL;
+
+	/* Doing it in the reverse order so F01 will be removed last */
+	list_for_each_entry_safe_reverse(fn, tmp,
+					 &data->function_list, node) {
+		list_del(&fn->node);
+		rmi_unregister_function(fn);
+	}
+}
+
+static int reset_one_function(struct rmi_function *fn)
+{
+	struct rmi_function_handler *fh;
+	int retval = 0;
+
+	if (!fn || !fn->dev.driver)
+		return 0;
+
+	fh = to_rmi_function_handler(fn->dev.driver);
+	if (fh->reset) {
+		retval = fh->reset(fn);
+		if (retval < 0)
+			dev_err(&fn->dev, "Reset failed with code %d.\n",
+				retval);
+	}
+
+	return retval;
+}
+
+static int configure_one_function(struct rmi_function *fn)
+{
+	struct rmi_function_handler *fh;
+	int retval = 0;
+
+	if (!fn || !fn->dev.driver)
+		return 0;
+
+	fh = to_rmi_function_handler(fn->dev.driver);
+	if (fh->config) {
+		retval = fh->config(fn);
+		if (retval < 0)
+			dev_err(&fn->dev, "Config failed with code %d.\n",
+				retval);
+	}
+
+	return retval;
+}
+
+static int rmi_driver_process_reset_requests(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_function *entry;
+	int retval;
+
+	list_for_each_entry(entry, &data->function_list, node) {
+		retval = reset_one_function(entry);
+		if (retval < 0)
+			return retval;
+	}
+
+	return 0;
+}
+
+static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_function *entry;
+	int retval;
+
+	list_for_each_entry(entry, &data->function_list, node) {
+		retval = configure_one_function(entry);
+		if (retval < 0)
+			return retval;
+	}
+
+	return 0;
+}
+
+static void process_one_interrupt(struct rmi_driver_data *data,
+				  struct rmi_function *fn)
+{
+	struct rmi_function_handler *fh;
+
+	if (!fn || !fn->dev.driver)
+		return;
+
+	fh = to_rmi_function_handler(fn->dev.driver);
+	if (fn->irq_mask && fh->attention) {
+		bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask,
+				data->irq_count);
+		if (!bitmap_empty(data->fn_irq_bits, data->irq_count))
+			fh->attention(fn, data->fn_irq_bits);
+	}
+}
+
+int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct device *dev = &rmi_dev->dev;
+	struct rmi_function *entry;
+	int error;
+
+	if (!rmi_dev->xport->attn_data) {
+		error = rmi_read_block(rmi_dev,
+				data->f01_container->fd.data_base_addr + 1,
+				data->irq_status, data->num_of_irq_regs);
+		if (error < 0) {
+			dev_err(dev, "Failed to read irqs, code=%d\n", error);
+			return error;
+		}
+	}
+
+	mutex_lock(&data->irq_mutex);
+	bitmap_and(data->irq_status, data->irq_status, data->current_irq_mask,
+	       data->irq_count);
+	/*
+	 * At this point, irq_status has all bits that are set in the
+	 * interrupt status register and are enabled.
+	 */
+	mutex_unlock(&data->irq_mutex);
+
+	/*
+	 * It would be nice to be able to use irq_chip to handle these
+	 * nested IRQs.  Unfortunately, most of the current customers for
+	 * this driver are using older kernels (3.0.x) that don't support
+	 * the features required for that.  Once they've shifted to more
+	 * recent kernels (say, 3.3 and higher), this should be switched to
+	 * use irq_chip.
+	 */
+	list_for_each_entry(entry, &data->function_list, node)
+		if (entry->irq_mask)
+			process_one_interrupt(data, entry);
+
+	if (data->input)
+		input_sync(data->input);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rmi_process_interrupt_requests);
+
+static int suspend_one_function(struct rmi_function *fn)
+{
+	struct rmi_function_handler *fh;
+	int retval = 0;
+
+	if (!fn || !fn->dev.driver)
+		return 0;
+
+	fh = to_rmi_function_handler(fn->dev.driver);
+	if (fh->suspend) {
+		retval = fh->suspend(fn);
+		if (retval < 0)
+			dev_err(&fn->dev, "Suspend failed with code %d.\n",
+				retval);
+	}
+
+	return retval;
+}
+
+static int rmi_suspend_functions(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_function *entry;
+	int retval;
+
+	list_for_each_entry(entry, &data->function_list, node) {
+		retval = suspend_one_function(entry);
+		if (retval < 0)
+			return retval;
+	}
+
+	return 0;
+}
+
+static int resume_one_function(struct rmi_function *fn)
+{
+	struct rmi_function_handler *fh;
+	int retval = 0;
+
+	if (!fn || !fn->dev.driver)
+		return 0;
+
+	fh = to_rmi_function_handler(fn->dev.driver);
+	if (fh->resume) {
+		retval = fh->resume(fn);
+		if (retval < 0)
+			dev_err(&fn->dev, "Resume failed with code %d.\n",
+				retval);
+	}
+
+	return retval;
+}
+
+static int rmi_resume_functions(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_function *entry;
+	int retval;
+
+	list_for_each_entry(entry, &data->function_list, node) {
+		retval = resume_one_function(entry);
+		if (retval < 0)
+			return retval;
+	}
+
+	return 0;
+}
+
+static int enable_sensor(struct rmi_device *rmi_dev)
+{
+	int retval = 0;
+
+	retval = rmi_driver_process_config_requests(rmi_dev);
+	if (retval < 0)
+		return retval;
+
+	return rmi_process_interrupt_requests(rmi_dev);
+}
+
+/**
+ * rmi_driver_set_input_params - set input device id and other data.
+ *
+ * @rmi_dev: Pointer to an RMI device
+ * @input: Pointer to input device
+ *
+ */
+static int rmi_driver_set_input_params(struct rmi_device *rmi_dev,
+				struct input_dev *input)
+{
+	input->name = SYNAPTICS_INPUT_DEVICE_NAME;
+	input->id.vendor  = SYNAPTICS_VENDOR_ID;
+	input->id.bustype = BUS_RMI;
+	return 0;
+}
+
+static void rmi_driver_set_input_name(struct rmi_device *rmi_dev,
+				struct input_dev *input)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	char *device_name = rmi_f01_get_product_ID(data->f01_container);
+	char *name;
+
+	name = devm_kasprintf(&rmi_dev->dev, GFP_KERNEL,
+			      "Synaptics %s", device_name);
+	if (!name)
+		return;
+
+	input->name = name;
+}
+
+static int rmi_driver_set_irq_bits(struct rmi_device *rmi_dev,
+				   unsigned long *mask)
+{
+	int error = 0;
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct device *dev = &rmi_dev->dev;
+
+	mutex_lock(&data->irq_mutex);
+	bitmap_or(data->new_irq_mask,
+		  data->current_irq_mask, mask, data->irq_count);
+
+	error = rmi_write_block(rmi_dev,
+			data->f01_container->fd.control_base_addr + 1,
+			data->new_irq_mask, data->num_of_irq_regs);
+	if (error < 0) {
+		dev_err(dev, "%s: Failed to change enabled interrupts!",
+							__func__);
+		goto error_unlock;
+	}
+	bitmap_copy(data->current_irq_mask, data->new_irq_mask,
+		    data->num_of_irq_regs);
+
+error_unlock:
+	mutex_unlock(&data->irq_mutex);
+	return error;
+}
+
+static int rmi_driver_clear_irq_bits(struct rmi_device *rmi_dev,
+				     unsigned long *mask)
+{
+	int error = 0;
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct device *dev = &rmi_dev->dev;
+
+	mutex_lock(&data->irq_mutex);
+	bitmap_andnot(data->new_irq_mask,
+		  data->current_irq_mask, mask, data->irq_count);
+
+	error = rmi_write_block(rmi_dev,
+			data->f01_container->fd.control_base_addr + 1,
+			data->new_irq_mask, data->num_of_irq_regs);
+	if (error < 0) {
+		dev_err(dev, "%s: Failed to change enabled interrupts!",
+							__func__);
+		goto error_unlock;
+	}
+	bitmap_copy(data->current_irq_mask, data->new_irq_mask,
+		    data->num_of_irq_regs);
+
+error_unlock:
+	mutex_unlock(&data->irq_mutex);
+	return error;
+}
+
+static int rmi_driver_reset_handler(struct rmi_device *rmi_dev)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int error;
+
+	/*
+	 * Can get called before the driver is fully ready to deal with
+	 * this situation.
+	 */
+	if (!data || !data->f01_container) {
+		dev_warn(&rmi_dev->dev,
+			 "Not ready to handle reset yet!\n");
+		return 0;
+	}
+
+	error = rmi_read_block(rmi_dev,
+			       data->f01_container->fd.control_base_addr + 1,
+			       data->current_irq_mask, data->num_of_irq_regs);
+	if (error < 0) {
+		dev_err(&rmi_dev->dev, "%s: Failed to read current IRQ mask.\n",
+			__func__);
+		return error;
+	}
+
+	error = rmi_driver_process_reset_requests(rmi_dev);
+	if (error < 0)
+		return error;
+
+	error = rmi_driver_process_config_requests(rmi_dev);
+	if (error < 0)
+		return error;
+
+	return 0;
+}
+
+int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
+			u16 pdt_address)
+{
+	u8 buf[RMI_PDT_ENTRY_SIZE];
+	int error;
+
+	error = rmi_read_block(rmi_dev, pdt_address, buf, RMI_PDT_ENTRY_SIZE);
+	if (error) {
+		dev_err(&rmi_dev->dev, "Read PDT entry at %#06x failed, code: %d.\n",
+				pdt_address, error);
+		return error;
+	}
+
+	entry->page_start = pdt_address & RMI4_PAGE_MASK;
+	entry->query_base_addr = buf[0];
+	entry->command_base_addr = buf[1];
+	entry->control_base_addr = buf[2];
+	entry->data_base_addr = buf[3];
+	entry->interrupt_source_count = buf[4] & RMI_PDT_INT_SOURCE_COUNT_MASK;
+	entry->function_version = (buf[4] & RMI_PDT_FUNCTION_VERSION_MASK) >> 5;
+	entry->function_number = buf[5];
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rmi_read_pdt_entry);
+
+static void rmi_driver_copy_pdt_to_fd(const struct pdt_entry *pdt,
+				      struct rmi_function_descriptor *fd)
+{
+	fd->query_base_addr = pdt->query_base_addr + pdt->page_start;
+	fd->command_base_addr = pdt->command_base_addr + pdt->page_start;
+	fd->control_base_addr = pdt->control_base_addr + pdt->page_start;
+	fd->data_base_addr = pdt->data_base_addr + pdt->page_start;
+	fd->function_number = pdt->function_number;
+	fd->interrupt_source_count = pdt->interrupt_source_count;
+	fd->function_version = pdt->function_version;
+}
+
+#define RMI_SCAN_CONTINUE	0
+#define RMI_SCAN_DONE		1
+
+static int rmi_scan_pdt_page(struct rmi_device *rmi_dev,
+			     int page,
+			     void *ctx,
+			     int (*callback)(struct rmi_device *rmi_dev,
+					     void *ctx,
+					     const struct pdt_entry *entry))
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	struct pdt_entry pdt_entry;
+	u16 page_start = RMI4_PAGE_SIZE * page;
+	u16 pdt_start = page_start + PDT_START_SCAN_LOCATION;
+	u16 pdt_end = page_start + PDT_END_SCAN_LOCATION;
+	u16 addr;
+	int error;
+	int retval;
+
+	for (addr = pdt_start; addr >= pdt_end; addr -= RMI_PDT_ENTRY_SIZE) {
+		error = rmi_read_pdt_entry(rmi_dev, &pdt_entry, addr);
+		if (error)
+			return error;
+
+		if (RMI4_END_OF_PDT(pdt_entry.function_number))
+			break;
+
+		retval = callback(rmi_dev, ctx, &pdt_entry);
+		if (retval != RMI_SCAN_CONTINUE)
+			return retval;
+	}
+
+	return (data->f01_bootloader_mode || addr == pdt_start) ?
+					RMI_SCAN_DONE : RMI_SCAN_CONTINUE;
+}
+
+static int rmi_scan_pdt(struct rmi_device *rmi_dev, void *ctx,
+			int (*callback)(struct rmi_device *rmi_dev,
+					void *ctx,
+					const struct pdt_entry *entry))
+{
+	int page;
+	int retval = RMI_SCAN_DONE;
+
+	for (page = 0; page <= RMI4_MAX_PAGE; page++) {
+		retval = rmi_scan_pdt_page(rmi_dev, page, ctx, callback);
+		if (retval != RMI_SCAN_CONTINUE)
+			break;
+	}
+
+	return retval < 0 ? retval : 0;
+}
+
+int rmi_read_register_desc(struct rmi_device *d, u16 addr,
+				struct rmi_register_descriptor *rdesc)
+{
+	int ret;
+	u8 size_presence_reg;
+	u8 buf[35];
+	int presense_offset = 1;
+	u8 *struct_buf;
+	int reg;
+	int offset = 0;
+	int map_offset = 0;
+	int i;
+	int b;
+
+	/*
+	 * The first register of the register descriptor is the size of
+	 * the register descriptor's presense register.
+	 */
+	ret = rmi_read(d, addr, &size_presence_reg);
+	if (ret)
+		return ret;
+	++addr;
+
+	if (size_presence_reg < 0 || size_presence_reg > 35)
+		return -EIO;
+
+	memset(buf, 0, sizeof(buf));
+
+	/*
+	 * The presence register contains the size of the register structure
+	 * and a bitmap which identified which packet registers are present
+	 * for this particular register type (ie query, control, or data).
+	 */
+	ret = rmi_read_block(d, addr, buf, size_presence_reg);
+	if (ret)
+		return ret;
+	++addr;
+
+	if (buf[0] == 0) {
+		presense_offset = 3;
+		rdesc->struct_size = buf[1] | (buf[2] << 8);
+	} else {
+		rdesc->struct_size = buf[0];
+	}
+
+	for (i = presense_offset; i < size_presence_reg; i++) {
+		for (b = 0; b < 8; b++) {
+			if (buf[i] & (0x1 << b))
+				bitmap_set(rdesc->presense_map, map_offset, 1);
+			++map_offset;
+		}
+	}
+
+	rdesc->num_registers = bitmap_weight(rdesc->presense_map,
+						RMI_REG_DESC_PRESENSE_BITS);
+
+	rdesc->registers = devm_kzalloc(&d->dev, rdesc->num_registers *
+				sizeof(struct rmi_register_desc_item),
+				GFP_KERNEL);
+	if (!rdesc->registers)
+		return -ENOMEM;
+
+	/*
+	 * Allocate a temporary buffer to hold the register structure.
+	 * I'm not using devm_kzalloc here since it will not be retained
+	 * after exiting this function
+	 */
+	struct_buf = kzalloc(rdesc->struct_size, GFP_KERNEL);
+	if (!struct_buf)
+		return -ENOMEM;
+
+	/*
+	 * The register structure contains information about every packet
+	 * register of this type. This includes the size of the packet
+	 * register and a bitmap of all subpackets contained in the packet
+	 * register.
+	 */
+	ret = rmi_read_block(d, addr, struct_buf, rdesc->struct_size);
+	if (ret)
+		goto free_struct_buff;
+
+	reg = find_first_bit(rdesc->presense_map, RMI_REG_DESC_PRESENSE_BITS);
+	map_offset = 0;
+	for (i = 0; i < rdesc->num_registers; i++) {
+		struct rmi_register_desc_item *item = &rdesc->registers[i];
+		int reg_size = struct_buf[offset];
+
+		++offset;
+		if (reg_size == 0) {
+			reg_size = struct_buf[offset] |
+					(struct_buf[offset + 1] << 8);
+			offset += 2;
+		}
+
+		if (reg_size == 0) {
+			reg_size = struct_buf[offset] |
+					(struct_buf[offset + 1] << 8) |
+					(struct_buf[offset + 2] << 16) |
+					(struct_buf[offset + 3] << 24);
+			offset += 4;
+		}
+
+		item->reg = reg;
+		item->reg_size = reg_size;
+
+		do {
+			for (b = 0; b < 7; b++) {
+				if (struct_buf[offset] & (0x1 << b))
+					bitmap_set(item->subpacket_map,
+						map_offset, 1);
+				++map_offset;
+			}
+		} while (struct_buf[offset++] & 0x80);
+
+		item->num_subpackets = bitmap_weight(item->subpacket_map,
+						RMI_REG_DESC_SUBPACKET_BITS);
+
+		rmi_dbg(RMI_DEBUG_CORE, &d->dev,
+			"%s: reg: %d reg size: %ld subpackets: %d\n", __func__,
+			item->reg, item->reg_size, item->num_subpackets);
+
+		reg = find_next_bit(rdesc->presense_map,
+				RMI_REG_DESC_PRESENSE_BITS, reg + 1);
+	}
+
+free_struct_buff:
+	kfree(struct_buf);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(rmi_read_register_desc);
+
+const struct rmi_register_desc_item *rmi_get_register_desc_item(
+				struct rmi_register_descriptor *rdesc, u16 reg)
+{
+	const struct rmi_register_desc_item *item;
+	int i;
+
+	for (i = 0; i < rdesc->num_registers; i++) {
+		item = &rdesc->registers[i];
+		if (item->reg == reg)
+			return item;
+	}
+
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(rmi_get_register_desc_item);
+
+size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc)
+{
+	const struct rmi_register_desc_item *item;
+	int i;
+	size_t size = 0;
+
+	for (i = 0; i < rdesc->num_registers; i++) {
+		item = &rdesc->registers[i];
+		size += item->reg_size;
+	}
+	return size;
+}
+EXPORT_SYMBOL_GPL(rmi_register_desc_calc_size);
+
+/* Compute the register offset relative to the base address */
+int rmi_register_desc_calc_reg_offset(
+		struct rmi_register_descriptor *rdesc, u16 reg)
+{
+	const struct rmi_register_desc_item *item;
+	int offset = 0;
+	int i;
+
+	for (i = 0; i < rdesc->num_registers; i++) {
+		item = &rdesc->registers[i];
+		if (item->reg == reg)
+			return offset;
+		++offset;
+	}
+	return -1;
+}
+EXPORT_SYMBOL_GPL(rmi_register_desc_calc_reg_offset);
+
+bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
+	u8 subpacket)
+{
+	return find_next_bit(item->subpacket_map, RMI_REG_DESC_PRESENSE_BITS,
+				subpacket) == subpacket;
+}
+
+/* Indicates that flash programming is enabled (bootloader mode). */
+#define RMI_F01_STATUS_BOOTLOADER(status)	(!!((status) & 0x40))
+
+/*
+ * Given the PDT entry for F01, read the device status register to determine
+ * if we're stuck in bootloader mode or not.
+ *
+ */
+static int rmi_check_bootloader_mode(struct rmi_device *rmi_dev,
+				     const struct pdt_entry *pdt)
+{
+	int error;
+	u8 device_status;
+
+	error = rmi_read(rmi_dev, pdt->data_base_addr + pdt->page_start,
+			 &device_status);
+	if (error) {
+		dev_err(&rmi_dev->dev,
+			"Failed to read device status: %d.\n", error);
+		return error;
+	}
+
+	return RMI_F01_STATUS_BOOTLOADER(device_status);
+}
+
+static int rmi_count_irqs(struct rmi_device *rmi_dev,
+			 void *ctx, const struct pdt_entry *pdt)
+{
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int *irq_count = ctx;
+
+	*irq_count += pdt->interrupt_source_count;
+	if (pdt->function_number == 0x01) {
+		data->f01_bootloader_mode =
+			rmi_check_bootloader_mode(rmi_dev, pdt);
+		if (data->f01_bootloader_mode)
+			dev_warn(&rmi_dev->dev,
+				"WARNING: RMI4 device is in bootloader mode!\n");
+	}
+
+	return RMI_SCAN_CONTINUE;
+}
+
+static int rmi_initial_reset(struct rmi_device *rmi_dev,
+			     void *ctx, const struct pdt_entry *pdt)
+{
+	int error;
+
+	if (pdt->function_number == 0x01) {
+		u16 cmd_addr = pdt->page_start + pdt->command_base_addr;
+		u8 cmd_buf = RMI_DEVICE_RESET_CMD;
+		const struct rmi_device_platform_data *pdata =
+				rmi_get_platform_data(rmi_dev);
+
+		if (rmi_dev->xport->ops->reset) {
+			error = rmi_dev->xport->ops->reset(rmi_dev->xport,
+								cmd_addr);
+			if (error)
+				return error;
+
+			return RMI_SCAN_DONE;
+		}
+
+		error = rmi_write_block(rmi_dev, cmd_addr, &cmd_buf, 1);
+		if (error) {
+			dev_err(&rmi_dev->dev,
+				"Initial reset failed. Code = %d.\n", error);
+			return error;
+		}
+
+		mdelay(pdata->reset_delay_ms ?: DEFAULT_RESET_DELAY_MS);
+
+		return RMI_SCAN_DONE;
+	}
+
+	/* F01 should always be on page 0. If we don't find it there, fail. */
+	return pdt->page_start == 0 ? RMI_SCAN_CONTINUE : -ENODEV;
+}
+
+static int rmi_create_function(struct rmi_device *rmi_dev,
+			       void *ctx, const struct pdt_entry *pdt)
+{
+	struct device *dev = &rmi_dev->dev;
+	struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
+	int *current_irq_count = ctx;
+	struct rmi_function *fn;
+	int i;
+	int error;
+
+	rmi_dbg(RMI_DEBUG_CORE, dev, "Initializing F%02X.\n",
+			pdt->function_number);
+
+	fn = kzalloc(sizeof(struct rmi_function) +
+			BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long),
+		     GFP_KERNEL);
+	if (!fn) {
+		dev_err(dev, "Failed to allocate memory for F%02X\n",
+			pdt->function_number);
+		return -ENOMEM;
+	}
+
+	INIT_LIST_HEAD(&fn->node);
+	rmi_driver_copy_pdt_to_fd(pdt, &fn->fd);
+
+	fn->rmi_dev = rmi_dev;
+
+	fn->num_of_irqs = pdt->interrupt_source_count;
+	fn->irq_pos = *current_irq_count;
+	*current_irq_count += fn->num_of_irqs;
+
+	for (i = 0; i < fn->num_of_irqs; i++)
+		set_bit(fn->irq_pos + i, fn->irq_mask);
+
+	error = rmi_register_function(fn);
+	if (error)
+		goto err_put_fn;
+
+	if (pdt->function_number == 0x01)
+		data->f01_container = fn;
+
+	list_add_tail(&fn->node, &data->function_list);
+
+	return RMI_SCAN_CONTINUE;
+
+err_put_fn:
+	put_device(&fn->dev);
+	return error;
+}
+
+int rmi_driver_suspend(struct rmi_device *rmi_dev)
+{
+	int retval = 0;
+
+	retval = rmi_suspend_functions(rmi_dev);
+	if (retval)
+		dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
+			retval);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(rmi_driver_suspend);
+
+int rmi_driver_resume(struct rmi_device *rmi_dev)
+{
+	int retval;
+
+	retval = rmi_resume_functions(rmi_dev);
+	if (retval)
+		dev_warn(&rmi_dev->dev, "Failed to suspend functions: %d\n",
+			retval);
+
+	return retval;
+}
+EXPORT_SYMBOL_GPL(rmi_driver_resume);
+
+static int rmi_driver_remove(struct device *dev)
+{
+	struct rmi_device *rmi_dev = to_rmi_device(dev);
+
+	rmi_free_function_list(rmi_dev);
+
+	return 0;
+}
+
+static int rmi_driver_probe(struct device *dev)
+{
+	struct rmi_driver *rmi_driver;
+	struct rmi_driver_data *data;
+	struct rmi_device_platform_data *pdata;
+	struct rmi_device *rmi_dev;
+	size_t size;
+	void *irq_memory;
+	int irq_count;
+	int retval;
+
+	rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Starting probe.\n",
+			__func__);
+
+	if (!rmi_is_physical_device(dev)) {
+		rmi_dbg(RMI_DEBUG_CORE, dev, "Not a physical device.\n");
+		return -ENODEV;
+	}
+
+	rmi_dev = to_rmi_device(dev);
+	rmi_driver = to_rmi_driver(dev->driver);
+	rmi_dev->driver = rmi_driver;
+
+	pdata = rmi_get_platform_data(rmi_dev);
+
+	data = devm_kzalloc(dev, sizeof(struct rmi_driver_data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	INIT_LIST_HEAD(&data->function_list);
+	data->rmi_dev = rmi_dev;
+	dev_set_drvdata(&rmi_dev->dev, data);
+
+	/*
+	 * Right before a warm boot, the sensor might be in some unusual state,
+	 * such as F54 diagnostics, or F34 bootloader mode after a firmware
+	 * or configuration update.  In order to clear the sensor to a known
+	 * state and/or apply any updates, we issue a initial reset to clear any
+	 * previous settings and force it into normal operation.
+	 *
+	 * We have to do this before actually building the PDT because
+	 * the reflash updates (if any) might cause various registers to move
+	 * around.
+	 *
+	 * For a number of reasons, this initial reset may fail to return
+	 * within the specified time, but we'll still be able to bring up the
+	 * driver normally after that failure.  This occurs most commonly in
+	 * a cold boot situation (where then firmware takes longer to come up
+	 * than from a warm boot) and the reset_delay_ms in the platform data
+	 * has been set too short to accommodate that.  Since the sensor will
+	 * eventually come up and be usable, we don't want to just fail here
+	 * and leave the customer's device unusable.  So we warn them, and
+	 * continue processing.
+	 */
+	retval = rmi_scan_pdt(rmi_dev, NULL, rmi_initial_reset);
+	if (retval < 0)
+		dev_warn(dev, "RMI initial reset failed! Continuing in spite of this.\n");
+
+	retval = rmi_read(rmi_dev, PDT_PROPERTIES_LOCATION, &data->pdt_props);
+	if (retval < 0) {
+		/*
+		 * we'll print out a warning and continue since
+		 * failure to get the PDT properties is not a cause to fail
+		 */
+		dev_warn(dev, "Could not read PDT properties from %#06x (code %d). Assuming 0x00.\n",
+			 PDT_PROPERTIES_LOCATION, retval);
+	}
+
+	/*
+	 * We need to count the IRQs and allocate their storage before scanning
+	 * the PDT and creating the function entries, because adding a new
+	 * function can trigger events that result in the IRQ related storage
+	 * being accessed.
+	 */
+	rmi_dbg(RMI_DEBUG_CORE, dev, "Counting IRQs.\n");
+	irq_count = 0;
+	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
+	if (retval < 0) {
+		dev_err(dev, "IRQ counting failed with code %d.\n", retval);
+		goto err;
+	}
+	data->irq_count = irq_count;
+	data->num_of_irq_regs = (data->irq_count + 7) / 8;
+
+	mutex_init(&data->irq_mutex);
+
+	size = BITS_TO_LONGS(data->irq_count) * sizeof(unsigned long);
+	irq_memory = devm_kzalloc(dev, size * 4, GFP_KERNEL);
+	if (!irq_memory) {
+		dev_err(dev, "Failed to allocate memory for irq masks.\n");
+		goto err;
+	}
+
+	data->irq_status	= irq_memory + size * 0;
+	data->fn_irq_bits	= irq_memory + size * 1;
+	data->current_irq_mask	= irq_memory + size * 2;
+	data->new_irq_mask	= irq_memory + size * 3;
+
+	if (rmi_dev->xport->input) {
+		/*
+		 * The transport driver already has an input device.
+		 * In some cases it is preferable to reuse the transport
+		 * devices input device instead of creating a new one here.
+		 * One example is some HID touchpads report "pass-through"
+		 * button events are not reported by rmi registers.
+		 */
+		data->input = rmi_dev->xport->input;
+	} else {
+		data->input = devm_input_allocate_device(dev);
+		if (!data->input) {
+			dev_err(dev, "%s: Failed to allocate input device.\n",
+				__func__);
+			retval = -ENOMEM;
+			goto err_destroy_functions;
+		}
+		rmi_driver_set_input_params(rmi_dev, data->input);
+		data->input->phys = devm_kasprintf(dev, GFP_KERNEL,
+						"%s/input0", dev_name(dev));
+	}
+
+	irq_count = 0;
+	rmi_dbg(RMI_DEBUG_CORE, dev, "Creating functions.");
+	retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
+	if (retval < 0) {
+		dev_err(dev, "Function creation failed with code %d.\n",
+			retval);
+		goto err_destroy_functions;
+	}
+
+	if (!data->f01_container) {
+		dev_err(dev, "Missing F01 container!\n");
+		retval = -EINVAL;
+		goto err_destroy_functions;
+	}
+
+	retval = rmi_read_block(rmi_dev,
+				data->f01_container->fd.control_base_addr + 1,
+				data->current_irq_mask, data->num_of_irq_regs);
+	if (retval < 0) {
+		dev_err(dev, "%s: Failed to read current IRQ mask.\n",
+			__func__);
+		goto err_destroy_functions;
+	}
+
+	if (data->input) {
+		rmi_driver_set_input_name(rmi_dev, data->input);
+		if (!rmi_dev->xport->input) {
+			if (input_register_device(data->input)) {
+				dev_err(dev, "%s: Failed to register input device.\n",
+					__func__);
+				goto err_destroy_functions;
+			}
+		}
+	}
+
+	if (data->f01_container->dev.driver)
+		/* Driver already bound, so enable ATTN now. */
+		return enable_sensor(rmi_dev);
+
+	return 0;
+
+err_destroy_functions:
+	rmi_free_function_list(rmi_dev);
+err:
+	return retval < 0 ? retval : 0;
+}
+
+static struct rmi_driver rmi_physical_driver = {
+	.driver = {
+		.owner	= THIS_MODULE,
+		.name	= "rmi4_physical",
+		.bus	= &rmi_bus_type,
+		.probe = rmi_driver_probe,
+		.remove = rmi_driver_remove,
+	},
+	.reset_handler = rmi_driver_reset_handler,
+	.clear_irq_bits = rmi_driver_clear_irq_bits,
+	.set_irq_bits = rmi_driver_set_irq_bits,
+	.set_input_params = rmi_driver_set_input_params,
+};
+
+bool rmi_is_physical_driver(struct device_driver *drv)
+{
+	return drv == &rmi_physical_driver.driver;
+}
+
+int __init rmi_register_physical_driver(void)
+{
+	int error;
+
+	error = driver_register(&rmi_physical_driver.driver);
+	if (error) {
+		pr_err("%s: driver register failed, code=%d.\n", __func__,
+		       error);
+		return error;
+	}
+
+	return 0;
+}
+
+void __exit rmi_unregister_physical_driver(void)
+{
+	driver_unregister(&rmi_physical_driver.driver);
+}
diff --git a/drivers/input/rmi4/rmi_driver.h b/drivers/input/rmi4/rmi_driver.h
new file mode 100644
index 0000000..bc87c09
--- /dev/null
+++ b/drivers/input/rmi4/rmi_driver.h
@@ -0,0 +1,103 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _RMI_DRIVER_H
+#define _RMI_DRIVER_H
+
+#include <linux/ctype.h>
+#include <linux/hrtimer.h>
+#include <linux/ktime.h>
+#include <linux/input.h>
+#include "rmi_bus.h"
+
+#define RMI_DRIVER_VERSION "2.0"
+
+#define SYNAPTICS_INPUT_DEVICE_NAME "Synaptics RMI4 Touch Sensor"
+#define SYNAPTICS_VENDOR_ID 0x06cb
+
+#define GROUP(_attrs) { \
+	.attrs = _attrs,  \
+}
+
+#define PDT_PROPERTIES_LOCATION 0x00EF
+#define BSR_LOCATION 0x00FE
+
+#define RMI_PDT_PROPS_HAS_BSR 0x02
+
+#define NAME_BUFFER_SIZE 256
+
+#define RMI_PDT_ENTRY_SIZE 6
+#define RMI_PDT_FUNCTION_VERSION_MASK   0x60
+#define RMI_PDT_INT_SOURCE_COUNT_MASK   0x07
+
+#define PDT_START_SCAN_LOCATION 0x00e9
+#define PDT_END_SCAN_LOCATION	0x0005
+#define RMI4_END_OF_PDT(id) ((id) == 0x00 || (id) == 0xff)
+
+struct pdt_entry {
+	u16 page_start;
+	u8 query_base_addr;
+	u8 command_base_addr;
+	u8 control_base_addr;
+	u8 data_base_addr;
+	u8 interrupt_source_count;
+	u8 function_version;
+	u8 function_number;
+};
+
+int rmi_read_pdt_entry(struct rmi_device *rmi_dev, struct pdt_entry *entry,
+			u16 pdt_address);
+
+#define RMI_REG_DESC_PRESENSE_BITS	(32 * BITS_PER_BYTE)
+#define RMI_REG_DESC_SUBPACKET_BITS	(37 * BITS_PER_BYTE)
+
+/* describes a single packet register */
+struct rmi_register_desc_item {
+	u16 reg;
+	unsigned long reg_size;
+	u8 num_subpackets;
+	unsigned long subpacket_map[BITS_TO_LONGS(
+				RMI_REG_DESC_SUBPACKET_BITS)];
+};
+
+/*
+ * describes the packet registers for a particular type
+ * (ie query, control, data)
+ */
+struct rmi_register_descriptor {
+	unsigned long struct_size;
+	unsigned long presense_map[BITS_TO_LONGS(RMI_REG_DESC_PRESENSE_BITS)];
+	u8 num_registers;
+	struct rmi_register_desc_item *registers;
+};
+
+int rmi_read_register_desc(struct rmi_device *d, u16 addr,
+				struct rmi_register_descriptor *rdesc);
+const struct rmi_register_desc_item *rmi_get_register_desc_item(
+				struct rmi_register_descriptor *rdesc, u16 reg);
+
+/*
+ * Calculate the total size of all of the registers described in the
+ * descriptor.
+ */
+size_t rmi_register_desc_calc_size(struct rmi_register_descriptor *rdesc);
+int rmi_register_desc_calc_reg_offset(
+			struct rmi_register_descriptor *rdesc, u16 reg);
+bool rmi_register_desc_has_subpacket(const struct rmi_register_desc_item *item,
+			u8 subpacket);
+
+bool rmi_is_physical_driver(struct device_driver *);
+int rmi_register_physical_driver(void);
+void rmi_unregister_physical_driver(void);
+
+char *rmi_f01_get_product_ID(struct rmi_function *fn);
+
+extern struct rmi_function_handler rmi_f01_handler;
+
+#endif
diff --git a/drivers/input/rmi4/rmi_f01.c b/drivers/input/rmi4/rmi_f01.c
new file mode 100644
index 0000000..09fb20b
--- /dev/null
+++ b/drivers/input/rmi4/rmi_f01.c
@@ -0,0 +1,575 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/kconfig.h>
+#include <linux/rmi.h>
+#include <linux/slab.h>
+#include <linux/uaccess.h>
+#include <linux/of.h>
+#include "rmi_driver.h"
+
+#define RMI_PRODUCT_ID_LENGTH    10
+#define RMI_PRODUCT_INFO_LENGTH   2
+
+#define RMI_DATE_CODE_LENGTH      3
+
+#define PRODUCT_ID_OFFSET 0x10
+#define PRODUCT_INFO_OFFSET 0x1E
+
+
+/* Force a firmware reset of the sensor */
+#define RMI_F01_CMD_DEVICE_RESET	1
+
+/* Various F01_RMI_QueryX bits */
+
+#define RMI_F01_QRY1_CUSTOM_MAP		BIT(0)
+#define RMI_F01_QRY1_NON_COMPLIANT	BIT(1)
+#define RMI_F01_QRY1_HAS_LTS		BIT(2)
+#define RMI_F01_QRY1_HAS_SENSOR_ID	BIT(3)
+#define RMI_F01_QRY1_HAS_CHARGER_INP	BIT(4)
+#define RMI_F01_QRY1_HAS_ADJ_DOZE	BIT(5)
+#define RMI_F01_QRY1_HAS_ADJ_DOZE_HOFF	BIT(6)
+#define RMI_F01_QRY1_HAS_QUERY42	BIT(7)
+
+#define RMI_F01_QRY5_YEAR_MASK		0x1f
+#define RMI_F01_QRY6_MONTH_MASK		0x0f
+#define RMI_F01_QRY7_DAY_MASK		0x1f
+
+#define RMI_F01_QRY2_PRODINFO_MASK	0x7f
+
+#define RMI_F01_BASIC_QUERY_LEN		21 /* From Query 00 through 20 */
+
+struct f01_basic_properties {
+	u8 manufacturer_id;
+	bool has_lts;
+	bool has_adjustable_doze;
+	bool has_adjustable_doze_holdoff;
+	char dom[11]; /* YYYY/MM/DD + '\0' */
+	u8 product_id[RMI_PRODUCT_ID_LENGTH + 1];
+	u16 productinfo;
+	u32 firmware_id;
+};
+
+/* F01 device status bits */
+
+/* Most recent device status event */
+#define RMI_F01_STATUS_CODE(status)		((status) & 0x0f)
+/* The device has lost its configuration for some reason. */
+#define RMI_F01_STATUS_UNCONFIGURED(status)	(!!((status) & 0x80))
+
+/* Control register bits */
+
+/*
+ * Sleep mode controls power management on the device and affects all
+ * functions of the device.
+ */
+#define RMI_F01_CTRL0_SLEEP_MODE_MASK	0x03
+
+#define RMI_SLEEP_MODE_NORMAL		0x00
+#define RMI_SLEEP_MODE_SENSOR_SLEEP	0x01
+#define RMI_SLEEP_MODE_RESERVED0	0x02
+#define RMI_SLEEP_MODE_RESERVED1	0x03
+
+/*
+ * This bit disables whatever sleep mode may be selected by the sleep_mode
+ * field and forces the device to run at full power without sleeping.
+ */
+#define RMI_F01_CRTL0_NOSLEEP_BIT	BIT(2)
+
+/*
+ * When this bit is set, the touch controller employs a noise-filtering
+ * algorithm designed for use with a connected battery charger.
+ */
+#define RMI_F01_CRTL0_CHARGER_BIT	BIT(5)
+
+/*
+ * Sets the report rate for the device. The effect of this setting is
+ * highly product dependent. Check the spec sheet for your particular
+ * touch sensor.
+ */
+#define RMI_F01_CRTL0_REPORTRATE_BIT	BIT(6)
+
+/*
+ * Written by the host as an indicator that the device has been
+ * successfully configured.
+ */
+#define RMI_F01_CRTL0_CONFIGURED_BIT	BIT(7)
+
+/**
+ * @ctrl0 - see the bit definitions above.
+ * @doze_interval - controls the interval between checks for finger presence
+ * when the touch sensor is in doze mode, in units of 10ms.
+ * @wakeup_threshold - controls the capacitance threshold at which the touch
+ * sensor will decide to wake up from that low power state.
+ * @doze_holdoff - controls how long the touch sensor waits after the last
+ * finger lifts before entering the doze state, in units of 100ms.
+ */
+struct f01_device_control {
+	u8 ctrl0;
+	u8 doze_interval;
+	u8 wakeup_threshold;
+	u8 doze_holdoff;
+};
+
+struct f01_data {
+	struct f01_basic_properties properties;
+	struct f01_device_control device_control;
+
+	u16 doze_interval_addr;
+	u16 wakeup_threshold_addr;
+	u16 doze_holdoff_addr;
+
+	bool suspended;
+	bool old_nosleep;
+
+	unsigned int num_of_irq_regs;
+};
+
+static int rmi_f01_read_properties(struct rmi_device *rmi_dev,
+				   u16 query_base_addr,
+				   struct f01_basic_properties *props)
+{
+	u8 queries[RMI_F01_BASIC_QUERY_LEN];
+	int ret;
+	int query_offset = query_base_addr;
+	bool has_ds4_queries = false;
+	bool has_query42 = false;
+	bool has_sensor_id = false;
+	bool has_package_id_query = false;
+	bool has_build_id_query = false;
+	u16 prod_info_addr;
+	u8 ds4_query_len;
+
+	ret = rmi_read_block(rmi_dev, query_offset,
+			       queries, RMI_F01_BASIC_QUERY_LEN);
+	if (ret) {
+		dev_err(&rmi_dev->dev,
+			"Failed to read device query registers: %d\n", ret);
+		return ret;
+	}
+
+	prod_info_addr = query_offset + 17;
+	query_offset += RMI_F01_BASIC_QUERY_LEN;
+
+	/* Now parse what we got */
+	props->manufacturer_id = queries[0];
+
+	props->has_lts = queries[1] & RMI_F01_QRY1_HAS_LTS;
+	props->has_adjustable_doze =
+			queries[1] & RMI_F01_QRY1_HAS_ADJ_DOZE;
+	props->has_adjustable_doze_holdoff =
+			queries[1] & RMI_F01_QRY1_HAS_ADJ_DOZE_HOFF;
+	has_query42 = queries[1] & RMI_F01_QRY1_HAS_QUERY42;
+	has_sensor_id = queries[1] & RMI_F01_QRY1_HAS_SENSOR_ID;
+
+	snprintf(props->dom, sizeof(props->dom), "20%02d/%02d/%02d",
+		 queries[5] & RMI_F01_QRY5_YEAR_MASK,
+		 queries[6] & RMI_F01_QRY6_MONTH_MASK,
+		 queries[7] & RMI_F01_QRY7_DAY_MASK);
+
+	memcpy(props->product_id, &queries[11],
+		RMI_PRODUCT_ID_LENGTH);
+	props->product_id[RMI_PRODUCT_ID_LENGTH] = '\0';
+
+	props->productinfo =
+			((queries[2] & RMI_F01_QRY2_PRODINFO_MASK) << 7) |
+			(queries[3] & RMI_F01_QRY2_PRODINFO_MASK);
+
+	if (has_sensor_id)
+		query_offset++;
+
+	if (has_query42) {
+		ret = rmi_read(rmi_dev, query_offset, queries);
+		if (ret) {
+			dev_err(&rmi_dev->dev,
+				"Failed to read query 42 register: %d\n", ret);
+			return ret;
+		}
+
+		has_ds4_queries = !!(queries[0] & BIT(0));
+		query_offset++;
+	}
+
+	if (has_ds4_queries) {
+		ret = rmi_read(rmi_dev, query_offset, &ds4_query_len);
+		if (ret) {
+			dev_err(&rmi_dev->dev,
+				"Failed to read DS4 queries length: %d\n", ret);
+			return ret;
+		}
+		query_offset++;
+
+		if (ds4_query_len > 0) {
+			ret = rmi_read(rmi_dev, query_offset, queries);
+			if (ret) {
+				dev_err(&rmi_dev->dev,
+					"Failed to read DS4 queries: %d\n",
+					ret);
+				return ret;
+			}
+
+			has_package_id_query = !!(queries[0] & BIT(0));
+			has_build_id_query = !!(queries[0] & BIT(1));
+		}
+
+		if (has_package_id_query)
+			prod_info_addr++;
+
+		if (has_build_id_query) {
+			ret = rmi_read_block(rmi_dev, prod_info_addr, queries,
+					    3);
+			if (ret) {
+				dev_err(&rmi_dev->dev,
+					"Failed to read product info: %d\n",
+					ret);
+				return ret;
+			}
+
+			props->firmware_id = queries[1] << 8 | queries[0];
+			props->firmware_id += queries[2] * 65536;
+		}
+	}
+
+	return 0;
+}
+
+char *rmi_f01_get_product_ID(struct rmi_function *fn)
+{
+	struct f01_data *f01 = dev_get_drvdata(&fn->dev);
+
+	return f01->properties.product_id;
+}
+
+static int rmi_f01_probe(struct rmi_function *fn)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	struct rmi_driver_data *driver_data = dev_get_drvdata(&rmi_dev->dev);
+	struct rmi_device_platform_data *pdata = rmi_get_platform_data(rmi_dev);
+	struct f01_data *f01;
+	int error;
+	u16 ctrl_base_addr = fn->fd.control_base_addr;
+	u8 device_status;
+	u8 temp;
+
+	f01 = devm_kzalloc(&fn->dev, sizeof(struct f01_data), GFP_KERNEL);
+	if (!f01)
+		return -ENOMEM;
+
+	f01->num_of_irq_regs = driver_data->num_of_irq_regs;
+
+	/*
+	 * Set the configured bit and (optionally) other important stuff
+	 * in the device control register.
+	 */
+
+	error = rmi_read(rmi_dev, fn->fd.control_base_addr,
+			 &f01->device_control.ctrl0);
+	if (error) {
+		dev_err(&fn->dev, "Failed to read F01 control: %d\n", error);
+		return error;
+	}
+
+	switch (pdata->power_management.nosleep) {
+	case RMI_F01_NOSLEEP_DEFAULT:
+		break;
+	case RMI_F01_NOSLEEP_OFF:
+		f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT;
+		break;
+	case RMI_F01_NOSLEEP_ON:
+		f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT;
+		break;
+	}
+
+	/*
+	 * Sleep mode might be set as a hangover from a system crash or
+	 * reboot without power cycle.  If so, clear it so the sensor
+	 * is certain to function.
+	 */
+	if ((f01->device_control.ctrl0 & RMI_F01_CTRL0_SLEEP_MODE_MASK) !=
+			RMI_SLEEP_MODE_NORMAL) {
+		dev_warn(&fn->dev,
+			 "WARNING: Non-zero sleep mode found. Clearing...\n");
+		f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
+	}
+
+	f01->device_control.ctrl0 |= RMI_F01_CRTL0_CONFIGURED_BIT;
+
+	error = rmi_write(rmi_dev, fn->fd.control_base_addr,
+			  f01->device_control.ctrl0);
+	if (error) {
+		dev_err(&fn->dev, "Failed to write F01 control: %d\n", error);
+		return error;
+	}
+
+	/* Dummy read in order to clear irqs */
+	error = rmi_read(rmi_dev, fn->fd.data_base_addr + 1, &temp);
+	if (error < 0) {
+		dev_err(&fn->dev, "Failed to read Interrupt Status.\n");
+		return error;
+	}
+
+	error = rmi_f01_read_properties(rmi_dev, fn->fd.query_base_addr,
+					&f01->properties);
+	if (error < 0) {
+		dev_err(&fn->dev, "Failed to read F01 properties.\n");
+		return error;
+	}
+
+	dev_info(&fn->dev, "found RMI device, manufacturer: %s, product: %s, fw id: %d\n",
+		 f01->properties.manufacturer_id == 1 ? "Synaptics" : "unknown",
+		 f01->properties.product_id, f01->properties.firmware_id);
+
+	/* Advance to interrupt control registers, then skip over them. */
+	ctrl_base_addr++;
+	ctrl_base_addr += f01->num_of_irq_regs;
+
+	/* read control register */
+	if (f01->properties.has_adjustable_doze) {
+		f01->doze_interval_addr = ctrl_base_addr;
+		ctrl_base_addr++;
+
+
+		if (pdata->power_management.doze_interval) {
+			f01->device_control.doze_interval =
+				pdata->power_management.doze_interval;
+			error = rmi_write(rmi_dev, f01->doze_interval_addr,
+					  f01->device_control.doze_interval);
+			if (error) {
+				dev_err(&fn->dev,
+					"Failed to configure F01 doze interval register: %d\n",
+					error);
+				return error;
+			}
+		} else {
+			error = rmi_read(rmi_dev, f01->doze_interval_addr,
+					 &f01->device_control.doze_interval);
+			if (error) {
+				dev_err(&fn->dev,
+					"Failed to read F01 doze interval register: %d\n",
+					error);
+				return error;
+			}
+		}
+
+		f01->wakeup_threshold_addr = ctrl_base_addr;
+		ctrl_base_addr++;
+
+		if (pdata->power_management.wakeup_threshold) {
+			f01->device_control.wakeup_threshold =
+				pdata->power_management.wakeup_threshold;
+			error = rmi_write(rmi_dev, f01->wakeup_threshold_addr,
+					  f01->device_control.wakeup_threshold);
+			if (error) {
+				dev_err(&fn->dev,
+					"Failed to configure F01 wakeup threshold register: %d\n",
+					error);
+				return error;
+			}
+		} else {
+			error = rmi_read(rmi_dev, f01->wakeup_threshold_addr,
+					 &f01->device_control.wakeup_threshold);
+			if (error < 0) {
+				dev_err(&fn->dev,
+					"Failed to read F01 wakeup threshold register: %d\n",
+					error);
+				return error;
+			}
+		}
+	}
+
+	if (f01->properties.has_lts)
+		ctrl_base_addr++;
+
+	if (f01->properties.has_adjustable_doze_holdoff) {
+		f01->doze_holdoff_addr = ctrl_base_addr;
+		ctrl_base_addr++;
+
+		if (pdata->power_management.doze_holdoff) {
+			f01->device_control.doze_holdoff =
+				pdata->power_management.doze_holdoff;
+			error = rmi_write(rmi_dev, f01->doze_holdoff_addr,
+					  f01->device_control.doze_holdoff);
+			if (error) {
+				dev_err(&fn->dev,
+					"Failed to configure F01 doze holdoff register: %d\n",
+					error);
+				return error;
+			}
+		} else {
+			error = rmi_read(rmi_dev, f01->doze_holdoff_addr,
+					 &f01->device_control.doze_holdoff);
+			if (error) {
+				dev_err(&fn->dev,
+					"Failed to read F01 doze holdoff register: %d\n",
+					error);
+				return error;
+			}
+		}
+	}
+
+	error = rmi_read(rmi_dev, fn->fd.data_base_addr, &device_status);
+	if (error < 0) {
+		dev_err(&fn->dev,
+			"Failed to read device status: %d\n", error);
+		return error;
+	}
+
+	if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
+		dev_err(&fn->dev,
+			"Device was reset during configuration process, status: %#02x!\n",
+			RMI_F01_STATUS_CODE(device_status));
+		return -EINVAL;
+	}
+
+	dev_set_drvdata(&fn->dev, f01);
+
+	return 0;
+}
+
+static int rmi_f01_config(struct rmi_function *fn)
+{
+	struct f01_data *f01 = dev_get_drvdata(&fn->dev);
+	int error;
+
+	error = rmi_write(fn->rmi_dev, fn->fd.control_base_addr,
+			  f01->device_control.ctrl0);
+	if (error) {
+		dev_err(&fn->dev,
+			"Failed to write device_control register: %d\n", error);
+		return error;
+	}
+
+	if (f01->properties.has_adjustable_doze) {
+		error = rmi_write(fn->rmi_dev, f01->doze_interval_addr,
+				  f01->device_control.doze_interval);
+		if (error) {
+			dev_err(&fn->dev,
+				"Failed to write doze interval: %d\n", error);
+			return error;
+		}
+
+		error = rmi_write_block(fn->rmi_dev,
+					 f01->wakeup_threshold_addr,
+					 &f01->device_control.wakeup_threshold,
+					 sizeof(u8));
+		if (error) {
+			dev_err(&fn->dev,
+				"Failed to write wakeup threshold: %d\n",
+				error);
+			return error;
+		}
+	}
+
+	if (f01->properties.has_adjustable_doze_holdoff) {
+		error = rmi_write(fn->rmi_dev, f01->doze_holdoff_addr,
+				  f01->device_control.doze_holdoff);
+		if (error) {
+			dev_err(&fn->dev,
+				"Failed to write doze holdoff: %d\n", error);
+			return error;
+		}
+	}
+
+	return 0;
+}
+
+static int rmi_f01_suspend(struct rmi_function *fn)
+{
+	struct f01_data *f01 = dev_get_drvdata(&fn->dev);
+	int error;
+
+	f01->old_nosleep =
+		f01->device_control.ctrl0 & RMI_F01_CRTL0_NOSLEEP_BIT;
+	f01->device_control.ctrl0 &= ~RMI_F01_CRTL0_NOSLEEP_BIT;
+
+	f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
+	if (device_may_wakeup(fn->rmi_dev->xport->dev))
+		f01->device_control.ctrl0 |= RMI_SLEEP_MODE_RESERVED1;
+	else
+		f01->device_control.ctrl0 |= RMI_SLEEP_MODE_SENSOR_SLEEP;
+
+	error = rmi_write(fn->rmi_dev, fn->fd.control_base_addr,
+			  f01->device_control.ctrl0);
+	if (error) {
+		dev_err(&fn->dev, "Failed to write sleep mode: %d.\n", error);
+		if (f01->old_nosleep)
+			f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT;
+		f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
+		f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL;
+		return error;
+	}
+
+	return 0;
+}
+
+static int rmi_f01_resume(struct rmi_function *fn)
+{
+	struct f01_data *f01 = dev_get_drvdata(&fn->dev);
+	int error;
+
+	if (f01->old_nosleep)
+		f01->device_control.ctrl0 |= RMI_F01_CRTL0_NOSLEEP_BIT;
+
+	f01->device_control.ctrl0 &= ~RMI_F01_CTRL0_SLEEP_MODE_MASK;
+	f01->device_control.ctrl0 |= RMI_SLEEP_MODE_NORMAL;
+
+	error = rmi_write(fn->rmi_dev, fn->fd.control_base_addr,
+			  f01->device_control.ctrl0);
+	if (error) {
+		dev_err(&fn->dev,
+			"Failed to restore normal operation: %d.\n", error);
+		return error;
+	}
+
+	return 0;
+}
+
+static int rmi_f01_attention(struct rmi_function *fn,
+			     unsigned long *irq_bits)
+{
+	struct rmi_device *rmi_dev = fn->rmi_dev;
+	int error;
+	u8 device_status;
+
+	error = rmi_read(rmi_dev, fn->fd.data_base_addr, &device_status);
+	if (error) {
+		dev_err(&fn->dev,
+			"Failed to read device status: %d.\n", error);
+		return error;
+	}
+
+	if (RMI_F01_STATUS_UNCONFIGURED(device_status)) {
+		dev_warn(&fn->dev, "Device reset detected.\n");
+		error = rmi_dev->driver->reset_handler(rmi_dev);
+		if (error) {
+			dev_err(&fn->dev, "Device reset failed: %d\n", error);
+			return error;
+		}
+	}
+
+	return 0;
+}
+
+struct rmi_function_handler rmi_f01_handler = {
+	.driver = {
+		.name	= "rmi4_f01",
+		/*
+		 * Do not allow user unbinding F01 as it is critical
+		 * function.
+		 */
+		.suppress_bind_attrs = true,
+	},
+	.func		= 0x01,
+	.probe		= rmi_f01_probe,
+	.config		= rmi_f01_config,
+	.attention	= rmi_f01_attention,
+	.suspend	= rmi_f01_suspend,
+	.resume		= rmi_f01_resume,
+};
diff --git a/include/linux/rmi.h b/include/linux/rmi.h
new file mode 100644
index 0000000..c559c48
--- /dev/null
+++ b/include/linux/rmi.h
@@ -0,0 +1,213 @@
+/*
+ * Copyright (c) 2011-2015 Synaptics Incorporated
+ * Copyright (c) 2011 Unixphere
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#ifndef _RMI_H
+#define _RMI_H
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/types.h>
+
+#define NAME_BUFFER_SIZE 256
+
+/**
+ * struct rmi_f01_power - override default power management settings.
+ *
+ */
+enum rmi_f01_nosleep {
+	RMI_F01_NOSLEEP_DEFAULT = 0,
+	RMI_F01_NOSLEEP_OFF = 1,
+	RMI_F01_NOSLEEP_ON = 2
+};
+
+/**
+ * struct rmi_f01_power_management -When non-zero, these values will be written
+ * to the touch sensor to override the default firmware settigns.  For a
+ * detailed explanation of what each field does, see the corresponding
+ * documention in the RMI4 specification.
+ *
+ * @nosleep - specifies whether the device is permitted to sleep or doze (that
+ * is, enter a temporary low power state) when no fingers are touching the
+ * sensor.
+ * @wakeup_threshold - controls the capacitance threshold at which the touch
+ * sensor will decide to wake up from that low power state.
+ * @doze_holdoff - controls how long the touch sensor waits after the last
+ * finger lifts before entering the doze state, in units of 100ms.
+ * @doze_interval - controls the interval between checks for finger presence
+ * when the touch sensor is in doze mode, in units of 10ms.
+ */
+struct rmi_f01_power_management {
+	enum rmi_f01_nosleep nosleep;
+	u8 wakeup_threshold;
+	u8 doze_holdoff;
+	u8 doze_interval;
+};
+
+/**
+ * struct rmi_device_platform_data - system specific configuration info.
+ *
+ * @irq_flags - this is used to specify intrerrupt type flags.
+ *
+ * @reset_delay_ms - after issuing a reset command to the touch sensor, the
+ * driver waits a few milliseconds to give the firmware a chance to
+ * to re-initialize.  You can override the default wait period here.
+ */
+struct rmi_device_platform_data {
+	int irq_flags;
+
+	int reset_delay_ms;
+
+	/* function handler pdata */
+	struct rmi_f01_power_management power_management;
+};
+
+/**
+ * struct rmi_function_descriptor - RMI function base addresses
+ *
+ * @query_base_addr: The RMI Query base address
+ * @command_base_addr: The RMI Command base address
+ * @control_base_addr: The RMI Control base address
+ * @data_base_addr: The RMI Data base address
+ * @interrupt_source_count: The number of irqs this RMI function needs
+ * @function_number: The RMI function number
+ *
+ * This struct is used when iterating the Page Description Table. The addresses
+ * are 16-bit values to include the current page address.
+ *
+ */
+struct rmi_function_descriptor {
+	u16 query_base_addr;
+	u16 command_base_addr;
+	u16 control_base_addr;
+	u16 data_base_addr;
+	u8 interrupt_source_count;
+	u8 function_number;
+	u8 function_version;
+};
+
+struct rmi_device;
+
+/**
+ * struct rmi_transport_dev - represent an RMI transport device
+ *
+ * @dev: Pointer to the communication device, e.g. i2c or spi
+ * @rmi_dev: Pointer to the RMI device
+ * @proto_name: name of the transport protocol (SPI, i2c, etc)
+ * @ops: pointer to transport operations implementation
+ *
+ * The RMI transport device implements the glue between different communication
+ * buses such as I2C and SPI.
+ *
+ */
+struct rmi_transport_dev {
+	struct device *dev;
+	struct rmi_device *rmi_dev;
+
+	const char *proto_name;
+	const struct rmi_transport_ops *ops;
+
+	struct rmi_device_platform_data pdata;
+
+	struct input_dev *input;
+
+	void *attn_data;
+	int attn_size;
+};
+
+/**
+ * struct rmi_transport_ops - defines transport protocol operations.
+ *
+ * @write_block: Writing a block of data to the specified address
+ * @read_block: Read a block of data from the specified address.
+ */
+struct rmi_transport_ops {
+	int (*write_block)(struct rmi_transport_dev *xport, u16 addr,
+			   const void *buf, size_t len);
+	int (*read_block)(struct rmi_transport_dev *xport, u16 addr,
+			  void *buf, size_t len);
+	int (*reset)(struct rmi_transport_dev *xport, u16 reset_addr);
+};
+
+/**
+ * struct rmi_driver - driver for an RMI4 sensor on the RMI bus.
+ *
+ * @driver: Device driver model driver
+ * @reset_handler: Called when a reset is detected.
+ * @clear_irq_bits: Clear the specified bits in the current interrupt mask.
+ * @set_irq_bist: Set the specified bits in the current interrupt mask.
+ * @store_productid: Callback for cache product id from function 01
+ * @data: Private data pointer
+ *
+ */
+struct rmi_driver {
+	struct device_driver driver;
+
+	int (*reset_handler)(struct rmi_device *rmi_dev);
+	int (*clear_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask);
+	int (*set_irq_bits)(struct rmi_device *rmi_dev, unsigned long *mask);
+	int (*store_productid)(struct rmi_device *rmi_dev);
+	int (*set_input_params)(struct rmi_device *rmi_dev,
+			struct input_dev *input);
+	void *data;
+};
+
+/**
+ * struct rmi_device - represents an RMI4 sensor device on the RMI bus.
+ *
+ * @dev: The device created for the RMI bus
+ * @number: Unique number for the device on the bus.
+ * @driver: Pointer to associated driver
+ * @xport: Pointer to the transport interface
+ *
+ */
+struct rmi_device {
+	struct device dev;
+	int number;
+
+	struct rmi_driver *driver;
+	struct rmi_transport_dev *xport;
+
+};
+
+struct rmi_driver_data {
+	struct list_head function_list;
+
+	struct rmi_device *rmi_dev;
+
+	struct rmi_function *f01_container;
+	bool f01_bootloader_mode;
+
+	u32 attn_count;
+	int num_of_irq_regs;
+	int irq_count;
+	unsigned long *irq_status;
+	unsigned long *fn_irq_bits;
+	unsigned long *current_irq_mask;
+	unsigned long *new_irq_mask;
+	struct mutex irq_mutex;
+	struct input_dev *input;
+
+	u8 pdt_props;
+	u8 bsr;
+
+	bool enabled;
+
+	void *data;
+};
+
+int rmi_register_transport_device(struct rmi_transport_dev *xport);
+void rmi_unregister_transport_device(struct rmi_transport_dev *xport);
+int rmi_process_interrupt_requests(struct rmi_device *rmi_dev);
+
+int rmi_driver_suspend(struct rmi_device *rmi_dev);
+int rmi_driver_resume(struct rmi_device *rmi_dev);
+#endif
diff --git a/include/uapi/linux/input.h b/include/uapi/linux/input.h
index 2758687..0111384 100644
--- a/include/uapi/linux/input.h
+++ b/include/uapi/linux/input.h
@@ -246,6 +246,7 @@ struct input_mask {
 #define BUS_GSC			0x1A
 #define BUS_ATARI		0x1B
 #define BUS_SPI			0x1C
+#define BUS_RMI			0x1D
 
 /*
  * MT_TOOL types
