diff mbox

[2/2,V4] Input: add Atmel Captouch Button driver

Message ID 1463513372-87267-1-git-send-email-grundler@chromium.org (mailing list archive)
State Superseded
Headers show

Commit Message

Grant Grundler May 17, 2016, 7:29 p.m. UTC
From: Daniel Hung-yu Wu <hywu@google.com>

Add I2C driver for Atmel Capacitive Touch Button device.

Signed-off-by: Hung-yu Wu <hywu@google.com>
Signed-off-by: Grant Grundler <grundler@chromium.org>
---
 drivers/input/misc/Kconfig          |  13 ++
 drivers/input/misc/Makefile         |   1 +
 drivers/input/misc/atmel_captouch.c | 287 ++++++++++++++++++++++++++++++++++++
 3 files changed, 299 insertions(+)
 create mode 100644 drivers/input/misc/atmel_captouch.c

V4: wordsmithing comments at top of file.
    Added missing semicolon to CONFIG_OF data struct.

V3: use dash, not underscore in nodename. Wordsmith Kconfig help text.

V2: split Documentation/devicetree/bindings from driver patch.
    rename "atmel,atmegaxx_captouch" to "atmel,captouch" since it's irrelevant
    which controller implements the register set/controller.

V1: posted https://lkml.org/lkml/2016/5/3/613

Comments

Dmitry Torokhov May 18, 2016, 9:59 p.m. UTC | #1
On Tue, May 17, 2016 at 12:29:32PM -0700, Grant Grundler wrote:
> From: Daniel Hung-yu Wu <hywu@google.com>
> 
> Add I2C driver for Atmel Capacitive Touch Button device.
> 
> Signed-off-by: Hung-yu Wu <hywu@google.com>
> Signed-off-by: Grant Grundler <grundler@chromium.org>

Applied, thank you.

> ---
>  drivers/input/misc/Kconfig          |  13 ++
>  drivers/input/misc/Makefile         |   1 +
>  drivers/input/misc/atmel_captouch.c | 287 ++++++++++++++++++++++++++++++++++++
>  3 files changed, 299 insertions(+)
>  create mode 100644 drivers/input/misc/atmel_captouch.c
> 
> V4: wordsmithing comments at top of file.
>     Added missing semicolon to CONFIG_OF data struct.
> 
> V3: use dash, not underscore in nodename. Wordsmith Kconfig help text.
> 
> V2: split Documentation/devicetree/bindings from driver patch.
>     rename "atmel,atmegaxx_captouch" to "atmel,captouch" since it's irrelevant
>     which controller implements the register set/controller.
> 
> V1: posted https://lkml.org/lkml/2016/5/3/613
> 
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index 838824b..d8b6620 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -82,6 +82,19 @@ config INPUT_ARIZONA_HAPTICS
>  	  To compile this driver as a module, choose M here: the
>  	  module will be called arizona-haptics.
>  
> +config INPUT_ATMEL_CAPTOUCH
> +	tristate "Atmel Capacitive Touch Button Driver"
> +	depends on OF || COMPILE_TEST
> +	help
> +	  Say Y here if an Atmel Capacitive Touch Button device which
> +	  implements "captouch" protocol is connected to I2C bus. Typically
> +	  this device consists of Atmel Touch sensor controlled by AtMegaXX
> +	  MCU running firmware based on Qtouch library.
> +	  One should find "atmel,captouch" node in the board specific DTS.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called atmel_captouch.
> +
>  config INPUT_BMA150
>  	tristate "BMA150/SMB380 acceleration sensor support"
>  	depends on I2C
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index f77268e..b5ec626 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -17,6 +17,7 @@ obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
>  obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)	+= arizona-haptics.o
>  obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
>  obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
> +obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH)	+= atmel_captouch.o
>  obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
>  obj-$(CONFIG_INPUT_BMA150)		+= bma150.o
>  obj-$(CONFIG_INPUT_CM109)		+= cm109.o
> diff --git a/drivers/input/misc/atmel_captouch.c b/drivers/input/misc/atmel_captouch.c
> new file mode 100644
> index 0000000..91bfc73
> --- /dev/null
> +++ b/drivers/input/misc/atmel_captouch.c
> @@ -0,0 +1,287 @@
> +/*
> + * Atmel Capacitive Touch Button Driver
> + *
> + * Copyright (C) 2016 Google, inc.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +/*
> + * It's irrelevant the HW used to develop captouch driver is based
> + * on Atmega88PA part and uses QtouchADC parts for sensing touch.
> + * Calling this driver "captouch" is an arbitrary way to distinguish
> + * the protocol this driver supports from other atmel/qtouch drivers.
> + *
> + * captouch driver supports a newer/different version of the I2C
> + * registers/commands than the qt1070.c driver.
> + * Don't let the similarity of the general driver structure fool you. :)
> + *
> + * For raw i2c access from userspace, use i2cset/i2cget
> + * to poke at /dev/i2c-N devices.
> + */
> +
> +#include <linux/device.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/slab.h>
> +
> +/* Maximum number of buttons supported */
> +#define MAX_NUM_OF_BUTTONS		8
> +
> +/* Registers */
> +#define REG_KEY1_THRESHOLD		0x02
> +#define REG_KEY2_THRESHOLD		0x03
> +#define REG_KEY3_THRESHOLD		0x04
> +#define REG_KEY4_THRESHOLD		0x05
> +
> +#define REG_KEY1_REF_H			0x20
> +#define REG_KEY1_REF_L			0x21
> +#define REG_KEY2_REF_H			0x22
> +#define REG_KEY2_REF_L			0x23
> +#define REG_KEY3_REF_H			0x24
> +#define REG_KEY3_REF_L			0x25
> +#define REG_KEY4_REF_H			0x26
> +#define REG_KEY4_REF_L			0x27
> +
> +#define REG_KEY1_DLT_H			0x30
> +#define REG_KEY1_DLT_L			0x31
> +#define REG_KEY2_DLT_H			0x32
> +#define REG_KEY2_DLT_L			0x33
> +#define REG_KEY3_DLT_H			0x34
> +#define REG_KEY3_DLT_L			0x35
> +#define REG_KEY4_DLT_H			0x36
> +#define REG_KEY4_DLT_L			0x37
> +
> +#define REG_KEY_STATE			0x3C
> +
> +/*
> + * @i2c_client: I2C slave device client pointer
> + * @input: Input device pointer
> + * @num_btn: Number of buttons
> + * @keycodes: map of button# to KeyCode
> + * @prev_btn: Previous key state to detect button "press" or "release"
> + * @xfer_buf: I2C transfer buffer
> + */
> +struct atmel_captouch_device {
> +	struct i2c_client *client;
> +	struct input_dev *input;
> +	u32 num_btn;
> +	u32 keycodes[MAX_NUM_OF_BUTTONS];
> +	u8 prev_btn;
> +	u8 xfer_buf[8] ____cacheline_aligned;
> +};
> +
> +/*
> + * Read from I2C slave device
> + * The protocol is that the client has to provide both the register address
> + * and the length, and while reading back the device would prepend the data
> + * with address and length for verification.
> + */
> +static int atmel_read(struct atmel_captouch_device *capdev,
> +			 u8 reg, u8 *data, size_t len)
> +{
> +	struct i2c_client *client = capdev->client;
> +	struct device *dev = &client->dev;
> +	struct i2c_msg msg[2];
> +	int err;
> +
> +	if (len > sizeof(capdev->xfer_buf) - 2)
> +		return -EINVAL;
> +
> +	capdev->xfer_buf[0] = reg;
> +	capdev->xfer_buf[1] = len;
> +
> +	msg[0].addr = client->addr;
> +	msg[0].flags = 0;
> +	msg[0].buf = capdev->xfer_buf;
> +	msg[0].len = 2;
> +
> +	msg[1].addr = client->addr;
> +	msg[1].flags = I2C_M_RD;
> +	msg[1].buf = capdev->xfer_buf;
> +	msg[1].len = len + 2;
> +
> +	err = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
> +	if (err != ARRAY_SIZE(msg))
> +		return err < 0 ? err : -EIO;
> +
> +	if (capdev->xfer_buf[0] != reg) {
> +		dev_err(dev, "I2C read error: register address does not match\n");
> +		return -ECOMM;
> +	}
> +
> +	memcpy(data, &capdev->xfer_buf[2], len);
> +
> +	return 0;
> +}
> +
> +/*
> + * Handle interrupt and report the key changes to the input system.
> + * Multi-touch can be supported; however, it really depends on whether
> + * the device can multi-touch.
> + */
> +static irqreturn_t atmel_captouch_isr(int irq, void *data)
> +{
> +	struct atmel_captouch_device *capdev = data;
> +	struct device *dev = &capdev->client->dev;
> +	int error;
> +	int i;
> +	u8 new_btn;
> +	u8 changed_btn;
> +
> +	error = atmel_read(capdev, REG_KEY_STATE, &new_btn, 1);
> +	if (error) {
> +		dev_err(dev, "failed to read button state: %d\n", error);
> +		goto out;
> +	}
> +
> +	dev_dbg(dev, "%s: button state %#02x\n", __func__, new_btn);
> +
> +	changed_btn = new_btn ^ capdev->prev_btn;
> +	capdev->prev_btn = new_btn;
> +
> +	for (i = 0; i < capdev->num_btn; i++) {
> +		if (changed_btn & BIT(i))
> +			input_report_key(capdev->input,
> +					 capdev->keycodes[i],
> +					 new_btn & BIT(i));
> +	}
> +
> +	input_sync(capdev->input);
> +
> +out:
> +	return IRQ_HANDLED;
> +}
> +
> +/*
> + * Probe function to setup the device, input system and interrupt
> + */
> +static int atmel_captouch_probe(struct i2c_client *client,
> +		const struct i2c_device_id *id)
> +{
> +	struct atmel_captouch_device *capdev;
> +	struct device *dev = &client->dev;
> +	struct device_node *node;
> +	int i;
> +	int err;
> +
> +	if (!i2c_check_functionality(client->adapter,
> +				     I2C_FUNC_SMBUS_BYTE_DATA |
> +					I2C_FUNC_SMBUS_WORD_DATA |
> +					I2C_FUNC_SMBUS_I2C_BLOCK)) {
> +		dev_err(dev, "needed i2c functionality is not supported\n");
> +		return -EINVAL;
> +	}
> +
> +	capdev = devm_kzalloc(dev, sizeof(*capdev), GFP_KERNEL);
> +	if (!capdev)
> +		return -ENOMEM;
> +
> +	capdev->client = client;
> +	i2c_set_clientdata(client, capdev);
> +
> +	err = atmel_read(capdev, REG_KEY_STATE,
> +			    &capdev->prev_btn, sizeof(capdev->prev_btn));
> +	if (err) {
> +		dev_err(dev, "failed to read initial button state: %d\n", err);
> +		return err;
> +	}
> +
> +	capdev->input = devm_input_allocate_device(dev);
> +	if (!capdev->input) {
> +		dev_err(dev, "failed to allocate input device\n");
> +		return -ENOMEM;
> +	}
> +
> +	capdev->input->id.bustype = BUS_I2C;
> +	capdev->input->id.product = 0x880A;
> +	capdev->input->id.version = 0;
> +	capdev->input->name = "ATMegaXX Capacitive Button Controller";
> +	__set_bit(EV_KEY, capdev->input->evbit);
> +
> +	node = dev->of_node;
> +	if (!node) {
> +		dev_err(dev, "failed to find matching node in device tree\n");
> +		return -EINVAL;
> +	}
> +
> +	if (of_property_read_bool(node, "autorepeat"))
> +		__set_bit(EV_REP, capdev->input->evbit);
> +
> +	capdev->num_btn = of_property_count_u32_elems(node, "linux,keymap");
> +	if (capdev->num_btn > MAX_NUM_OF_BUTTONS)
> +		capdev->num_btn = MAX_NUM_OF_BUTTONS;
> +
> +	err = of_property_read_u32_array(node, "linux,keycodes",
> +					 capdev->keycodes,
> +					 capdev->num_btn);
> +	if (err) {
> +		dev_err(dev,
> +			"failed to read linux,keycode property: %d\n", err);
> +		return err;
> +	}
> +
> +	for (i = 0; i < capdev->num_btn; i++)
> +		__set_bit(capdev->keycodes[i], capdev->input->keybit);
> +
> +	capdev->input->keycode = capdev->keycodes;
> +	capdev->input->keycodesize = sizeof(capdev->keycodes[0]);
> +	capdev->input->keycodemax = capdev->num_btn;
> +
> +	err = input_register_device(capdev->input);
> +	if (err)
> +		return err;
> +
> +	err = devm_request_threaded_irq(dev, client->irq, NULL,
> +				atmel_captouch_isr, IRQF_ONESHOT,
> +				"atmel_captouch", capdev);
> +	if (err) {
> +		dev_err(dev, "failed to request irq %d: %d\n",
> +			client->irq, err);
> +		return err;
> +	}
> +
> +	return 0;
> +}
> +
> +#ifdef CONFIG_OF
> +static const struct of_device_id atmel_captouch_of_id[] = {
> +	{
> +		.compatible = "atmel,captouch",
> +	},
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(of, atmel_captouch_of_id);
> +#endif
> +
> +static const struct i2c_device_id atmel_captouch_id[] = {
> +	{ "atmel_captouch", 0 },
> +	{ }
> +};
> +MODULE_DEVICE_TABLE(i2c, atmel_captouch_id);
> +
> +static struct i2c_driver atmel_captouch_driver = {
> +	.probe		= atmel_captouch_probe,
> +	.id_table	= atmel_captouch_id,
> +	.driver		= {
> +		.name	= "atmel_captouch",
> +		.of_match_table = of_match_ptr(atmel_captouch_of_id),
> +	},
> +};
> +module_i2c_driver(atmel_captouch_driver);
> +
> +/* Module information */
> +MODULE_AUTHOR("Hung-yu Wu <hywu@google.com>");
> +MODULE_DESCRIPTION("Atmel ATmegaXX Capacitance Touch Sensor I2C Driver");
> +MODULE_LICENSE("GPL v2");
> -- 
> 2.1.2
>
Grant Grundler May 18, 2016, 10:17 p.m. UTC | #2
On Wed, May 18, 2016 at 2:59 PM, Dmitry Torokhov
<dmitry.torokhov@gmail.com> wrote:
> On Tue, May 17, 2016 at 12:29:32PM -0700, Grant Grundler wrote:
>> From: Daniel Hung-yu Wu <hywu@google.com>
>>
>> Add I2C driver for Atmel Capacitive Touch Button device.
>>
>> Signed-off-by: Hung-yu Wu <hywu@google.com>
>> Signed-off-by: Grant Grundler <grundler@chromium.org>
>
> Applied, thank you.

Awesome! Thanks for your help Dmitry! :)

grant

>
>> ---
>>  drivers/input/misc/Kconfig          |  13 ++
>>  drivers/input/misc/Makefile         |   1 +
>>  drivers/input/misc/atmel_captouch.c | 287 ++++++++++++++++++++++++++++++++++++
>>  3 files changed, 299 insertions(+)
>>  create mode 100644 drivers/input/misc/atmel_captouch.c
>>
>> V4: wordsmithing comments at top of file.
>>     Added missing semicolon to CONFIG_OF data struct.
>>
>> V3: use dash, not underscore in nodename. Wordsmith Kconfig help text.
>>
>> V2: split Documentation/devicetree/bindings from driver patch.
>>     rename "atmel,atmegaxx_captouch" to "atmel,captouch" since it's irrelevant
>>     which controller implements the register set/controller.
>>
>> V1: posted https://lkml.org/lkml/2016/5/3/613
>>
>> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
>> index 838824b..d8b6620 100644
>> --- a/drivers/input/misc/Kconfig
>> +++ b/drivers/input/misc/Kconfig
>> @@ -82,6 +82,19 @@ config INPUT_ARIZONA_HAPTICS
>>         To compile this driver as a module, choose M here: the
>>         module will be called arizona-haptics.
>>
>> +config INPUT_ATMEL_CAPTOUCH
>> +     tristate "Atmel Capacitive Touch Button Driver"
>> +     depends on OF || COMPILE_TEST
>> +     help
>> +       Say Y here if an Atmel Capacitive Touch Button device which
>> +       implements "captouch" protocol is connected to I2C bus. Typically
>> +       this device consists of Atmel Touch sensor controlled by AtMegaXX
>> +       MCU running firmware based on Qtouch library.
>> +       One should find "atmel,captouch" node in the board specific DTS.
>> +
>> +       To compile this driver as a module, choose M here: the
>> +       module will be called atmel_captouch.
>> +
>>  config INPUT_BMA150
>>       tristate "BMA150/SMB380 acceleration sensor support"
>>       depends on I2C
>> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
>> index f77268e..b5ec626 100644
>> --- a/drivers/input/misc/Makefile
>> +++ b/drivers/input/misc/Makefile
>> @@ -17,6 +17,7 @@ obj-$(CONFIG_INPUT_APANEL)          += apanel.o
>>  obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)  += arizona-haptics.o
>>  obj-$(CONFIG_INPUT_ATI_REMOTE2)              += ati_remote2.o
>>  obj-$(CONFIG_INPUT_ATLAS_BTNS)               += atlas_btns.o
>> +obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH)   += atmel_captouch.o
>>  obj-$(CONFIG_INPUT_BFIN_ROTARY)              += bfin_rotary.o
>>  obj-$(CONFIG_INPUT_BMA150)           += bma150.o
>>  obj-$(CONFIG_INPUT_CM109)            += cm109.o
>> diff --git a/drivers/input/misc/atmel_captouch.c b/drivers/input/misc/atmel_captouch.c
>> new file mode 100644
>> index 0000000..91bfc73
>> --- /dev/null
>> +++ b/drivers/input/misc/atmel_captouch.c
>> @@ -0,0 +1,287 @@
>> +/*
>> + * Atmel Capacitive Touch Button Driver
>> + *
>> + * Copyright (C) 2016 Google, inc.
>> + *
>> + * This software is licensed under the terms of the GNU General Public
>> + * License version 2, as published by the Free Software Foundation, and
>> + * may be copied, distributed, and modified under those terms.
>> + *
>> + * This program is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
>> + * GNU General Public License for more details.
>> + */
>> +
>> +/*
>> + * It's irrelevant the HW used to develop captouch driver is based
>> + * on Atmega88PA part and uses QtouchADC parts for sensing touch.
>> + * Calling this driver "captouch" is an arbitrary way to distinguish
>> + * the protocol this driver supports from other atmel/qtouch drivers.
>> + *
>> + * captouch driver supports a newer/different version of the I2C
>> + * registers/commands than the qt1070.c driver.
>> + * Don't let the similarity of the general driver structure fool you. :)
>> + *
>> + * For raw i2c access from userspace, use i2cset/i2cget
>> + * to poke at /dev/i2c-N devices.
>> + */
>> +
>> +#include <linux/device.h>
>> +#include <linux/kernel.h>
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/i2c.h>
>> +#include <linux/input.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/slab.h>
>> +
>> +/* Maximum number of buttons supported */
>> +#define MAX_NUM_OF_BUTTONS           8
>> +
>> +/* Registers */
>> +#define REG_KEY1_THRESHOLD           0x02
>> +#define REG_KEY2_THRESHOLD           0x03
>> +#define REG_KEY3_THRESHOLD           0x04
>> +#define REG_KEY4_THRESHOLD           0x05
>> +
>> +#define REG_KEY1_REF_H                       0x20
>> +#define REG_KEY1_REF_L                       0x21
>> +#define REG_KEY2_REF_H                       0x22
>> +#define REG_KEY2_REF_L                       0x23
>> +#define REG_KEY3_REF_H                       0x24
>> +#define REG_KEY3_REF_L                       0x25
>> +#define REG_KEY4_REF_H                       0x26
>> +#define REG_KEY4_REF_L                       0x27
>> +
>> +#define REG_KEY1_DLT_H                       0x30
>> +#define REG_KEY1_DLT_L                       0x31
>> +#define REG_KEY2_DLT_H                       0x32
>> +#define REG_KEY2_DLT_L                       0x33
>> +#define REG_KEY3_DLT_H                       0x34
>> +#define REG_KEY3_DLT_L                       0x35
>> +#define REG_KEY4_DLT_H                       0x36
>> +#define REG_KEY4_DLT_L                       0x37
>> +
>> +#define REG_KEY_STATE                        0x3C
>> +
>> +/*
>> + * @i2c_client: I2C slave device client pointer
>> + * @input: Input device pointer
>> + * @num_btn: Number of buttons
>> + * @keycodes: map of button# to KeyCode
>> + * @prev_btn: Previous key state to detect button "press" or "release"
>> + * @xfer_buf: I2C transfer buffer
>> + */
>> +struct atmel_captouch_device {
>> +     struct i2c_client *client;
>> +     struct input_dev *input;
>> +     u32 num_btn;
>> +     u32 keycodes[MAX_NUM_OF_BUTTONS];
>> +     u8 prev_btn;
>> +     u8 xfer_buf[8] ____cacheline_aligned;
>> +};
>> +
>> +/*
>> + * Read from I2C slave device
>> + * The protocol is that the client has to provide both the register address
>> + * and the length, and while reading back the device would prepend the data
>> + * with address and length for verification.
>> + */
>> +static int atmel_read(struct atmel_captouch_device *capdev,
>> +                      u8 reg, u8 *data, size_t len)
>> +{
>> +     struct i2c_client *client = capdev->client;
>> +     struct device *dev = &client->dev;
>> +     struct i2c_msg msg[2];
>> +     int err;
>> +
>> +     if (len > sizeof(capdev->xfer_buf) - 2)
>> +             return -EINVAL;
>> +
>> +     capdev->xfer_buf[0] = reg;
>> +     capdev->xfer_buf[1] = len;
>> +
>> +     msg[0].addr = client->addr;
>> +     msg[0].flags = 0;
>> +     msg[0].buf = capdev->xfer_buf;
>> +     msg[0].len = 2;
>> +
>> +     msg[1].addr = client->addr;
>> +     msg[1].flags = I2C_M_RD;
>> +     msg[1].buf = capdev->xfer_buf;
>> +     msg[1].len = len + 2;
>> +
>> +     err = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
>> +     if (err != ARRAY_SIZE(msg))
>> +             return err < 0 ? err : -EIO;
>> +
>> +     if (capdev->xfer_buf[0] != reg) {
>> +             dev_err(dev, "I2C read error: register address does not match\n");
>> +             return -ECOMM;
>> +     }
>> +
>> +     memcpy(data, &capdev->xfer_buf[2], len);
>> +
>> +     return 0;
>> +}
>> +
>> +/*
>> + * Handle interrupt and report the key changes to the input system.
>> + * Multi-touch can be supported; however, it really depends on whether
>> + * the device can multi-touch.
>> + */
>> +static irqreturn_t atmel_captouch_isr(int irq, void *data)
>> +{
>> +     struct atmel_captouch_device *capdev = data;
>> +     struct device *dev = &capdev->client->dev;
>> +     int error;
>> +     int i;
>> +     u8 new_btn;
>> +     u8 changed_btn;
>> +
>> +     error = atmel_read(capdev, REG_KEY_STATE, &new_btn, 1);
>> +     if (error) {
>> +             dev_err(dev, "failed to read button state: %d\n", error);
>> +             goto out;
>> +     }
>> +
>> +     dev_dbg(dev, "%s: button state %#02x\n", __func__, new_btn);
>> +
>> +     changed_btn = new_btn ^ capdev->prev_btn;
>> +     capdev->prev_btn = new_btn;
>> +
>> +     for (i = 0; i < capdev->num_btn; i++) {
>> +             if (changed_btn & BIT(i))
>> +                     input_report_key(capdev->input,
>> +                                      capdev->keycodes[i],
>> +                                      new_btn & BIT(i));
>> +     }
>> +
>> +     input_sync(capdev->input);
>> +
>> +out:
>> +     return IRQ_HANDLED;
>> +}
>> +
>> +/*
>> + * Probe function to setup the device, input system and interrupt
>> + */
>> +static int atmel_captouch_probe(struct i2c_client *client,
>> +             const struct i2c_device_id *id)
>> +{
>> +     struct atmel_captouch_device *capdev;
>> +     struct device *dev = &client->dev;
>> +     struct device_node *node;
>> +     int i;
>> +     int err;
>> +
>> +     if (!i2c_check_functionality(client->adapter,
>> +                                  I2C_FUNC_SMBUS_BYTE_DATA |
>> +                                     I2C_FUNC_SMBUS_WORD_DATA |
>> +                                     I2C_FUNC_SMBUS_I2C_BLOCK)) {
>> +             dev_err(dev, "needed i2c functionality is not supported\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     capdev = devm_kzalloc(dev, sizeof(*capdev), GFP_KERNEL);
>> +     if (!capdev)
>> +             return -ENOMEM;
>> +
>> +     capdev->client = client;
>> +     i2c_set_clientdata(client, capdev);
>> +
>> +     err = atmel_read(capdev, REG_KEY_STATE,
>> +                         &capdev->prev_btn, sizeof(capdev->prev_btn));
>> +     if (err) {
>> +             dev_err(dev, "failed to read initial button state: %d\n", err);
>> +             return err;
>> +     }
>> +
>> +     capdev->input = devm_input_allocate_device(dev);
>> +     if (!capdev->input) {
>> +             dev_err(dev, "failed to allocate input device\n");
>> +             return -ENOMEM;
>> +     }
>> +
>> +     capdev->input->id.bustype = BUS_I2C;
>> +     capdev->input->id.product = 0x880A;
>> +     capdev->input->id.version = 0;
>> +     capdev->input->name = "ATMegaXX Capacitive Button Controller";
>> +     __set_bit(EV_KEY, capdev->input->evbit);
>> +
>> +     node = dev->of_node;
>> +     if (!node) {
>> +             dev_err(dev, "failed to find matching node in device tree\n");
>> +             return -EINVAL;
>> +     }
>> +
>> +     if (of_property_read_bool(node, "autorepeat"))
>> +             __set_bit(EV_REP, capdev->input->evbit);
>> +
>> +     capdev->num_btn = of_property_count_u32_elems(node, "linux,keymap");
>> +     if (capdev->num_btn > MAX_NUM_OF_BUTTONS)
>> +             capdev->num_btn = MAX_NUM_OF_BUTTONS;
>> +
>> +     err = of_property_read_u32_array(node, "linux,keycodes",
>> +                                      capdev->keycodes,
>> +                                      capdev->num_btn);
>> +     if (err) {
>> +             dev_err(dev,
>> +                     "failed to read linux,keycode property: %d\n", err);
>> +             return err;
>> +     }
>> +
>> +     for (i = 0; i < capdev->num_btn; i++)
>> +             __set_bit(capdev->keycodes[i], capdev->input->keybit);
>> +
>> +     capdev->input->keycode = capdev->keycodes;
>> +     capdev->input->keycodesize = sizeof(capdev->keycodes[0]);
>> +     capdev->input->keycodemax = capdev->num_btn;
>> +
>> +     err = input_register_device(capdev->input);
>> +     if (err)
>> +             return err;
>> +
>> +     err = devm_request_threaded_irq(dev, client->irq, NULL,
>> +                             atmel_captouch_isr, IRQF_ONESHOT,
>> +                             "atmel_captouch", capdev);
>> +     if (err) {
>> +             dev_err(dev, "failed to request irq %d: %d\n",
>> +                     client->irq, err);
>> +             return err;
>> +     }
>> +
>> +     return 0;
>> +}
>> +
>> +#ifdef CONFIG_OF
>> +static const struct of_device_id atmel_captouch_of_id[] = {
>> +     {
>> +             .compatible = "atmel,captouch",
>> +     },
>> +     { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, atmel_captouch_of_id);
>> +#endif
>> +
>> +static const struct i2c_device_id atmel_captouch_id[] = {
>> +     { "atmel_captouch", 0 },
>> +     { }
>> +};
>> +MODULE_DEVICE_TABLE(i2c, atmel_captouch_id);
>> +
>> +static struct i2c_driver atmel_captouch_driver = {
>> +     .probe          = atmel_captouch_probe,
>> +     .id_table       = atmel_captouch_id,
>> +     .driver         = {
>> +             .name   = "atmel_captouch",
>> +             .of_match_table = of_match_ptr(atmel_captouch_of_id),
>> +     },
>> +};
>> +module_i2c_driver(atmel_captouch_driver);
>> +
>> +/* Module information */
>> +MODULE_AUTHOR("Hung-yu Wu <hywu@google.com>");
>> +MODULE_DESCRIPTION("Atmel ATmegaXX Capacitance Touch Sensor I2C Driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 2.1.2
>>
>
> --
> Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 838824b..d8b6620 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -82,6 +82,19 @@  config INPUT_ARIZONA_HAPTICS
 	  To compile this driver as a module, choose M here: the
 	  module will be called arizona-haptics.
 
+config INPUT_ATMEL_CAPTOUCH
+	tristate "Atmel Capacitive Touch Button Driver"
+	depends on OF || COMPILE_TEST
+	help
+	  Say Y here if an Atmel Capacitive Touch Button device which
+	  implements "captouch" protocol is connected to I2C bus. Typically
+	  this device consists of Atmel Touch sensor controlled by AtMegaXX
+	  MCU running firmware based on Qtouch library.
+	  One should find "atmel,captouch" node in the board specific DTS.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called atmel_captouch.
+
 config INPUT_BMA150
 	tristate "BMA150/SMB380 acceleration sensor support"
 	depends on I2C
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index f77268e..b5ec626 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -17,6 +17,7 @@  obj-$(CONFIG_INPUT_APANEL)		+= apanel.o
 obj-$(CONFIG_INPUT_ARIZONA_HAPTICS)	+= arizona-haptics.o
 obj-$(CONFIG_INPUT_ATI_REMOTE2)		+= ati_remote2.o
 obj-$(CONFIG_INPUT_ATLAS_BTNS)		+= atlas_btns.o
+obj-$(CONFIG_INPUT_ATMEL_CAPTOUCH)	+= atmel_captouch.o
 obj-$(CONFIG_INPUT_BFIN_ROTARY)		+= bfin_rotary.o
 obj-$(CONFIG_INPUT_BMA150)		+= bma150.o
 obj-$(CONFIG_INPUT_CM109)		+= cm109.o
diff --git a/drivers/input/misc/atmel_captouch.c b/drivers/input/misc/atmel_captouch.c
new file mode 100644
index 0000000..91bfc73
--- /dev/null
+++ b/drivers/input/misc/atmel_captouch.c
@@ -0,0 +1,287 @@ 
+/*
+ * Atmel Capacitive Touch Button Driver
+ *
+ * Copyright (C) 2016 Google, inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * It's irrelevant the HW used to develop captouch driver is based
+ * on Atmega88PA part and uses QtouchADC parts for sensing touch.
+ * Calling this driver "captouch" is an arbitrary way to distinguish
+ * the protocol this driver supports from other atmel/qtouch drivers.
+ *
+ * captouch driver supports a newer/different version of the I2C
+ * registers/commands than the qt1070.c driver.
+ * Don't let the similarity of the general driver structure fool you. :)
+ *
+ * For raw i2c access from userspace, use i2cset/i2cget
+ * to poke at /dev/i2c-N devices.
+ */
+
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/slab.h>
+
+/* Maximum number of buttons supported */
+#define MAX_NUM_OF_BUTTONS		8
+
+/* Registers */
+#define REG_KEY1_THRESHOLD		0x02
+#define REG_KEY2_THRESHOLD		0x03
+#define REG_KEY3_THRESHOLD		0x04
+#define REG_KEY4_THRESHOLD		0x05
+
+#define REG_KEY1_REF_H			0x20
+#define REG_KEY1_REF_L			0x21
+#define REG_KEY2_REF_H			0x22
+#define REG_KEY2_REF_L			0x23
+#define REG_KEY3_REF_H			0x24
+#define REG_KEY3_REF_L			0x25
+#define REG_KEY4_REF_H			0x26
+#define REG_KEY4_REF_L			0x27
+
+#define REG_KEY1_DLT_H			0x30
+#define REG_KEY1_DLT_L			0x31
+#define REG_KEY2_DLT_H			0x32
+#define REG_KEY2_DLT_L			0x33
+#define REG_KEY3_DLT_H			0x34
+#define REG_KEY3_DLT_L			0x35
+#define REG_KEY4_DLT_H			0x36
+#define REG_KEY4_DLT_L			0x37
+
+#define REG_KEY_STATE			0x3C
+
+/*
+ * @i2c_client: I2C slave device client pointer
+ * @input: Input device pointer
+ * @num_btn: Number of buttons
+ * @keycodes: map of button# to KeyCode
+ * @prev_btn: Previous key state to detect button "press" or "release"
+ * @xfer_buf: I2C transfer buffer
+ */
+struct atmel_captouch_device {
+	struct i2c_client *client;
+	struct input_dev *input;
+	u32 num_btn;
+	u32 keycodes[MAX_NUM_OF_BUTTONS];
+	u8 prev_btn;
+	u8 xfer_buf[8] ____cacheline_aligned;
+};
+
+/*
+ * Read from I2C slave device
+ * The protocol is that the client has to provide both the register address
+ * and the length, and while reading back the device would prepend the data
+ * with address and length for verification.
+ */
+static int atmel_read(struct atmel_captouch_device *capdev,
+			 u8 reg, u8 *data, size_t len)
+{
+	struct i2c_client *client = capdev->client;
+	struct device *dev = &client->dev;
+	struct i2c_msg msg[2];
+	int err;
+
+	if (len > sizeof(capdev->xfer_buf) - 2)
+		return -EINVAL;
+
+	capdev->xfer_buf[0] = reg;
+	capdev->xfer_buf[1] = len;
+
+	msg[0].addr = client->addr;
+	msg[0].flags = 0;
+	msg[0].buf = capdev->xfer_buf;
+	msg[0].len = 2;
+
+	msg[1].addr = client->addr;
+	msg[1].flags = I2C_M_RD;
+	msg[1].buf = capdev->xfer_buf;
+	msg[1].len = len + 2;
+
+	err = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	if (err != ARRAY_SIZE(msg))
+		return err < 0 ? err : -EIO;
+
+	if (capdev->xfer_buf[0] != reg) {
+		dev_err(dev, "I2C read error: register address does not match\n");
+		return -ECOMM;
+	}
+
+	memcpy(data, &capdev->xfer_buf[2], len);
+
+	return 0;
+}
+
+/*
+ * Handle interrupt and report the key changes to the input system.
+ * Multi-touch can be supported; however, it really depends on whether
+ * the device can multi-touch.
+ */
+static irqreturn_t atmel_captouch_isr(int irq, void *data)
+{
+	struct atmel_captouch_device *capdev = data;
+	struct device *dev = &capdev->client->dev;
+	int error;
+	int i;
+	u8 new_btn;
+	u8 changed_btn;
+
+	error = atmel_read(capdev, REG_KEY_STATE, &new_btn, 1);
+	if (error) {
+		dev_err(dev, "failed to read button state: %d\n", error);
+		goto out;
+	}
+
+	dev_dbg(dev, "%s: button state %#02x\n", __func__, new_btn);
+
+	changed_btn = new_btn ^ capdev->prev_btn;
+	capdev->prev_btn = new_btn;
+
+	for (i = 0; i < capdev->num_btn; i++) {
+		if (changed_btn & BIT(i))
+			input_report_key(capdev->input,
+					 capdev->keycodes[i],
+					 new_btn & BIT(i));
+	}
+
+	input_sync(capdev->input);
+
+out:
+	return IRQ_HANDLED;
+}
+
+/*
+ * Probe function to setup the device, input system and interrupt
+ */
+static int atmel_captouch_probe(struct i2c_client *client,
+		const struct i2c_device_id *id)
+{
+	struct atmel_captouch_device *capdev;
+	struct device *dev = &client->dev;
+	struct device_node *node;
+	int i;
+	int err;
+
+	if (!i2c_check_functionality(client->adapter,
+				     I2C_FUNC_SMBUS_BYTE_DATA |
+					I2C_FUNC_SMBUS_WORD_DATA |
+					I2C_FUNC_SMBUS_I2C_BLOCK)) {
+		dev_err(dev, "needed i2c functionality is not supported\n");
+		return -EINVAL;
+	}
+
+	capdev = devm_kzalloc(dev, sizeof(*capdev), GFP_KERNEL);
+	if (!capdev)
+		return -ENOMEM;
+
+	capdev->client = client;
+	i2c_set_clientdata(client, capdev);
+
+	err = atmel_read(capdev, REG_KEY_STATE,
+			    &capdev->prev_btn, sizeof(capdev->prev_btn));
+	if (err) {
+		dev_err(dev, "failed to read initial button state: %d\n", err);
+		return err;
+	}
+
+	capdev->input = devm_input_allocate_device(dev);
+	if (!capdev->input) {
+		dev_err(dev, "failed to allocate input device\n");
+		return -ENOMEM;
+	}
+
+	capdev->input->id.bustype = BUS_I2C;
+	capdev->input->id.product = 0x880A;
+	capdev->input->id.version = 0;
+	capdev->input->name = "ATMegaXX Capacitive Button Controller";
+	__set_bit(EV_KEY, capdev->input->evbit);
+
+	node = dev->of_node;
+	if (!node) {
+		dev_err(dev, "failed to find matching node in device tree\n");
+		return -EINVAL;
+	}
+
+	if (of_property_read_bool(node, "autorepeat"))
+		__set_bit(EV_REP, capdev->input->evbit);
+
+	capdev->num_btn = of_property_count_u32_elems(node, "linux,keymap");
+	if (capdev->num_btn > MAX_NUM_OF_BUTTONS)
+		capdev->num_btn = MAX_NUM_OF_BUTTONS;
+
+	err = of_property_read_u32_array(node, "linux,keycodes",
+					 capdev->keycodes,
+					 capdev->num_btn);
+	if (err) {
+		dev_err(dev,
+			"failed to read linux,keycode property: %d\n", err);
+		return err;
+	}
+
+	for (i = 0; i < capdev->num_btn; i++)
+		__set_bit(capdev->keycodes[i], capdev->input->keybit);
+
+	capdev->input->keycode = capdev->keycodes;
+	capdev->input->keycodesize = sizeof(capdev->keycodes[0]);
+	capdev->input->keycodemax = capdev->num_btn;
+
+	err = input_register_device(capdev->input);
+	if (err)
+		return err;
+
+	err = devm_request_threaded_irq(dev, client->irq, NULL,
+				atmel_captouch_isr, IRQF_ONESHOT,
+				"atmel_captouch", capdev);
+	if (err) {
+		dev_err(dev, "failed to request irq %d: %d\n",
+			client->irq, err);
+		return err;
+	}
+
+	return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id atmel_captouch_of_id[] = {
+	{
+		.compatible = "atmel,captouch",
+	},
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, atmel_captouch_of_id);
+#endif
+
+static const struct i2c_device_id atmel_captouch_id[] = {
+	{ "atmel_captouch", 0 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, atmel_captouch_id);
+
+static struct i2c_driver atmel_captouch_driver = {
+	.probe		= atmel_captouch_probe,
+	.id_table	= atmel_captouch_id,
+	.driver		= {
+		.name	= "atmel_captouch",
+		.of_match_table = of_match_ptr(atmel_captouch_of_id),
+	},
+};
+module_i2c_driver(atmel_captouch_driver);
+
+/* Module information */
+MODULE_AUTHOR("Hung-yu Wu <hywu@google.com>");
+MODULE_DESCRIPTION("Atmel ATmegaXX Capacitance Touch Sensor I2C Driver");
+MODULE_LICENSE("GPL v2");