Message ID | 1468936286-2710-3-git-send-email-narmstrong@baylibre.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
On 07/19/2016 06:51 AM, Neil Armstrong wrote: > diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c > index 795fcbd..976f5f6 100644 > --- a/drivers/rtc/rtc-pm8xxx.c > +++ b/drivers/rtc/rtc-pm8xxx.c > @@ -393,6 +393,16 @@ static int pm8xxx_rtc_enable(struct pm8xxx_rtc *rtc_dd) > return 0; > } > > +static const struct pm8xxx_rtc_regs pm8018_regs = { > + .ctrl = 0x11d, > + .write = 0x11f, > + .read = 0x123, > + .alarm_rw = 0x127, > + .alarm_ctrl = 0x11d, > + .alarm_ctrl2 = 0x11e, > + .alarm_en = BIT(1), > +}; This is the same as pm8921_regs, so why do we need to duplicate it? Can't we point the new compatible at the same data?
diff --git a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt index f24f334..37a088f 100644 --- a/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt +++ b/Documentation/devicetree/bindings/mfd/qcom-pm8xxx.txt @@ -62,6 +62,7 @@ The below bindings specify the set of valid subnodes. "qcom,pm8058-rtc" "qcom,pm8921-rtc" "qcom,pm8941-rtc" + "qcom,pm8018-rtc" - reg: Usage: required diff --git a/drivers/rtc/rtc-pm8xxx.c b/drivers/rtc/rtc-pm8xxx.c index 795fcbd..976f5f6 100644 --- a/drivers/rtc/rtc-pm8xxx.c +++ b/drivers/rtc/rtc-pm8xxx.c @@ -393,6 +393,16 @@ static int pm8xxx_rtc_enable(struct pm8xxx_rtc *rtc_dd) return 0; } +static const struct pm8xxx_rtc_regs pm8018_regs = { + .ctrl = 0x11d, + .write = 0x11f, + .read = 0x123, + .alarm_rw = 0x127, + .alarm_ctrl = 0x11d, + .alarm_ctrl2 = 0x11e, + .alarm_en = BIT(1), +}; + static const struct pm8xxx_rtc_regs pm8921_regs = { .ctrl = 0x11d, .write = 0x11f, @@ -428,6 +438,7 @@ static const struct pm8xxx_rtc_regs pm8941_regs = { */ static const struct of_device_id pm8xxx_id_table[] = { { .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs }, + { .compatible = "qcom,pm8018-rtc", .data = &pm8018_regs }, { .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs }, { .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs }, { },