| Message ID | 1477445172-2682-1-git-send-email-simon@mungewell.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi all, maybe instead of stalling the entire init() function it'd be better to put a request to disable autocentering on a workqueue and start a delayed work once the init() function is done setting the wheel up? There'd be a bit more code to write though... Michal On Tuesday, October 25, 2016 7:26:12 PM CEST Simon Wood wrote: > A number of wheels (G27/etc) do a little full right/full left 'dance' > when first plugged in. This patch inserts a delay so that this 'dance' > is completed before we disable (set to zero) the autocenter spring. > > A side benefit is that the DFGT was confused without the delay, and is > now correctly being set to 900' rotation mode. > > Side Effect - and the reason I am sending as RFC. This 8s delay seems > to have an effect on other wheels connected at the same time. > > With 3 wheels on a hub, and then the hub connected to PC. The wheel > on the right in video below waits for G27 to complete this 8s, before > it will do it's 'dance' and register with the system. > > https://www.youtube.com/watch?v=xCVpCw_yGgA > > I don't know if this is a problem, or if someone here has suggestions > on a better way to implement the delay... > --- > drivers/hid/hid-lg4ff.c | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c > index af3a8ec..3eee920 100644 > --- a/drivers/hid/hid-lg4ff.c > +++ b/drivers/hid/hid-lg4ff.c > @@ -1248,6 +1248,8 @@ int lg4ff_init(struct hid_device *hid) > /* Check if autocentering is available and > * set the centering force to zero by default */ > if (test_bit(FF_AUTOCENTER, dev->ffbit)) { > + wait_queue_head_t wait; > + > /* Formula Force EX expects different autocentering command */ > if ((bcdDevice >> 8) == LG4FF_FFEX_REV_MAJ && > (bcdDevice & 0xff) == LG4FF_FFEX_REV_MIN) > @@ -1255,6 +1257,14 @@ int lg4ff_init(struct hid_device *hid) > else > dev->ff->set_autocenter = lg4ff_set_autocenter_default; > > + /* insert a 8s delay to allow DFGT/G25/G27/G29 wheels to return to center > position*/ + if (lg4ff_devices[i].product_id == > USB_DEVICE_ID_LOGITECH_DFGT_WHEEL || + lg4ff_devices[i].product_id == > USB_DEVICE_ID_LOGITECH_G25_WHEEL || + lg4ff_devices[i].product_id == > USB_DEVICE_ID_LOGITECH_G27_WHEEL || + lg4ff_devices[i].product_id == > USB_DEVICE_ID_LOGITECH_G29_WHEEL) { + init_waitqueue_head (&wait); > + wait_event_interruptible_timeout(wait, 0, msecs_to_jiffies(8000)); > + } > dev->ff->set_autocenter(dev, 0); > } -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Oct 26, 2016 at 12:36 AM, Michal Malý <madcatxster@gmail.com> wrote: > Hi all, > > maybe instead of stalling the entire init() function it'd be better to put a > request to disable autocentering on a workqueue and start a delayed work once > the init() function is done setting the wheel up? There'd be a bit more code > to write though... > Yeah, if device happens to be plugged at boot time it will wait that long before even getting to mount rootfs if driver is built into the kernel. This is also interesting way to say "msleep(8000)". > Michal > > On Tuesday, October 25, 2016 7:26:12 PM CEST Simon Wood wrote: >> A number of wheels (G27/etc) do a little full right/full left 'dance' >> when first plugged in. This patch inserts a delay so that this 'dance' >> is completed before we disable (set to zero) the autocenter spring. >> >> A side benefit is that the DFGT was confused without the delay, and is >> now correctly being set to 900' rotation mode. >> >> Side Effect - and the reason I am sending as RFC. This 8s delay seems >> to have an effect on other wheels connected at the same time. >> >> With 3 wheels on a hub, and then the hub connected to PC. The wheel >> on the right in video below waits for G27 to complete this 8s, before >> it will do it's 'dance' and register with the system. >> >> https://www.youtube.com/watch?v=xCVpCw_yGgA >> >> I don't know if this is a problem, or if someone here has suggestions >> on a better way to implement the delay... >> --- >> drivers/hid/hid-lg4ff.c | 10 ++++++++++ >> 1 file changed, 10 insertions(+) >> >> diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c >> index af3a8ec..3eee920 100644 >> --- a/drivers/hid/hid-lg4ff.c >> +++ b/drivers/hid/hid-lg4ff.c >> @@ -1248,6 +1248,8 @@ int lg4ff_init(struct hid_device *hid) >> /* Check if autocentering is available and >> * set the centering force to zero by default */ >> if (test_bit(FF_AUTOCENTER, dev->ffbit)) { >> + wait_queue_head_t wait; >> + >> /* Formula Force EX expects different autocentering command */ >> if ((bcdDevice >> 8) == LG4FF_FFEX_REV_MAJ && >> (bcdDevice & 0xff) == LG4FF_FFEX_REV_MIN) >> @@ -1255,6 +1257,14 @@ int lg4ff_init(struct hid_device *hid) >> else >> dev->ff->set_autocenter = lg4ff_set_autocenter_default; >> >> + /* insert a 8s delay to allow DFGT/G25/G27/G29 wheels to return to > center >> position*/ + if (lg4ff_devices[i].product_id == >> USB_DEVICE_ID_LOGITECH_DFGT_WHEEL || + > lg4ff_devices[i].product_id == >> USB_DEVICE_ID_LOGITECH_G25_WHEEL || + lg4ff_devices[i].product_id > == >> USB_DEVICE_ID_LOGITECH_G27_WHEEL || + lg4ff_devices[i].product_id > == >> USB_DEVICE_ID_LOGITECH_G29_WHEEL) { + init_waitqueue_head (&wait); >> + wait_event_interruptible_timeout(wait, 0, msecs_to_jiffies(8000)); >> + } >> dev->ff->set_autocenter(dev, 0); >> } > Thanks.
On Wed, October 26, 2016 11:00 am, Dmitry Torokhov wrote: > > Yeah, if device happens to be plugged at boot time it will wait that > long before even getting to mount rootfs if driver is built into the > kernel. Not a case I had considered... that would probably be bad. I'll look at coding up a work queue as Elias had suggested. > > This is also interesting way to say "msleep(8000)". I'm a copy/paste guy, this was from the delay we have in hid-lg.c probe, if one way or another is better I'll use that, Simon -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c index af3a8ec..3eee920 100644 --- a/drivers/hid/hid-lg4ff.c +++ b/drivers/hid/hid-lg4ff.c @@ -1248,6 +1248,8 @@ int lg4ff_init(struct hid_device *hid) /* Check if autocentering is available and * set the centering force to zero by default */ if (test_bit(FF_AUTOCENTER, dev->ffbit)) { + wait_queue_head_t wait; + /* Formula Force EX expects different autocentering command */ if ((bcdDevice >> 8) == LG4FF_FFEX_REV_MAJ && (bcdDevice & 0xff) == LG4FF_FFEX_REV_MIN) @@ -1255,6 +1257,14 @@ int lg4ff_init(struct hid_device *hid) else dev->ff->set_autocenter = lg4ff_set_autocenter_default; + /* insert a 8s delay to allow DFGT/G25/G27/G29 wheels to return to center position*/ + if (lg4ff_devices[i].product_id == USB_DEVICE_ID_LOGITECH_DFGT_WHEEL || + lg4ff_devices[i].product_id == USB_DEVICE_ID_LOGITECH_G25_WHEEL || + lg4ff_devices[i].product_id == USB_DEVICE_ID_LOGITECH_G27_WHEEL || + lg4ff_devices[i].product_id == USB_DEVICE_ID_LOGITECH_G29_WHEEL) { + init_waitqueue_head (&wait); + wait_event_interruptible_timeout(wait, 0, msecs_to_jiffies(8000)); + } dev->ff->set_autocenter(dev, 0); }