| Message ID | 1483430237-26823-3-git-send-email-jcsing.lee@samsung.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hello Jaechul, On 01/03/2017 04:57 AM, Jaechul Lee wrote: > This patch adds support for the TM2 touch key and led > functionlity. > s/functionlity/functionality > The driver interfaces with userspace through an input device and > reports KEY_PHONE and KEY_BACK event types. LED brightness can be > controlled by "/sys/class/leds/tm2-touchkey/brightness". > > Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com> > --- > drivers/input/keyboard/Kconfig | 11 ++ > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/tm2-touchkey.c | 326 ++++++++++++++++++++++++++++++++++ > 3 files changed, 338 insertions(+) > create mode 100644 drivers/input/keyboard/tm2-touchkey.c > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index cbd75cf..72c0ba1 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -666,6 +666,17 @@ config KEYBOARD_TC3589X > To compile this driver as a module, choose M here: the > module will be called tc3589x-keypad. > > +config KEYBOARD_TM2_TOUCHKEY > + tristate "tm2-touchkey support" > + depends on I2C > + help > + Say Y here to enable the tm2-touchkey. > + touchkey driver for tm2. This driver can enable > + the interrupt and make input events and control led brightness. > + > + To compile this driver as a module, choose M here. > + module will be called tm2-touchkey > + > config KEYBOARD_TWL4030 > tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" > depends on TWL4030_CORE > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > index d9f4cfc..7d9acff 100644 > --- a/drivers/input/keyboard/Makefile > +++ b/drivers/input/keyboard/Makefile > @@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o > obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o > obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o > obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o > +obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o > obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o > obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o > obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o > diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c > new file mode 100644 > index 0000000..d9575d8 > --- /dev/null > +++ b/drivers/input/keyboard/tm2-touchkey.c > @@ -0,0 +1,326 @@ > +/* > + * Driver for keys on GPIO lines capable of generating interrupts. > + * > + * Copyright 2005 Phil Blundell > + * Copyright 2016 Samsung Electronics Co., Ltd. > + * > + * Author: Beomho Seo <beomho.seo@samsung.com> > + * Author: Jaechul Lee <jcsing.lee@samsung.com> > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License version 2 as > + * published by the Free Software Foundation. > + */ > + > +#include <linux/bitops.h> > +#include <linux/delay.h> > +#include <linux/device.h> > +#include <linux/i2c.h> > +#include <linux/input.h> > +#include <linux/interrupt.h> > +#include <linux/irq.h> > +#include <linux/leds.h> > +#include <linux/module.h> > +#include <linux/of.h> > +#include <linux/pm.h> > +#include <linux/regulator/consumer.h> > +#include <linux/workqueue.h> > + > +#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey" > +#define TM2_TOUCHKEY_KEYCODE_REG 0x03 > +#define TM2_TOUCHKEY_BASE_REG 0x00 > +#define TM2_TOUCHKEY_CMD_LED_ON 0x10 > +#define TM2_TOUCHKEY_CMD_LED_OFF 0x20 > +#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3) > +#define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0) > +#define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000 > +#define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000 > + > +enum { > + TM2_TOUCHKEY_KEY_MENU = 0x1, > + TM2_TOUCHKEY_KEY_BACK, > +}; > + > +#define tm2_touchkey_power_enable(x) __tm2_touchkey_power_onoff(x, 1) > +#define tm2_touchkey_power_disable(x) __tm2_touchkey_power_onoff(x, 0) > + > +struct tm2_touchkey_data { > + struct i2c_client *client; > + struct input_dev *input_dev; > + struct led_classdev led_dev; > + > + u8 keycode_type; > + u8 pressed; > + struct work_struct irq_work; > + > + bool power_onoff; > + struct regulator *regulator_vcc; /* 1.8V */ > + struct regulator *regulator_vdd; /* 3.3V */ > +}; > + > +static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, > + enum led_brightness brightness) > +{ > + struct tm2_touchkey_data *samsung_touchkey = > + container_of(led_dev, struct tm2_touchkey_data, led_dev); > + u32 volt; > + u8 data; > + > + if (brightness == LED_OFF) { > + volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN; > + data = TM2_TOUCHKEY_CMD_LED_OFF; > + } else { > + volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX; > + data = TM2_TOUCHKEY_CMD_LED_ON; > + } > + > + regulator_set_voltage(samsung_touchkey->regulator_vdd, volt, volt); > + i2c_smbus_write_byte_data(samsung_touchkey->client, > + TM2_TOUCHKEY_BASE_REG, data); > +} > + > +static int __tm2_touchkey_power_onoff(struct tm2_touchkey_data > + *samsung_touchkey, bool onoff) > +{ > + int ret = 0; > + > + if (samsung_touchkey->power_onoff == onoff) > + return ret; > + > + if (onoff) { > + ret = regulator_enable(samsung_touchkey->regulator_vcc); > + if (ret) > + return ret; > + > + ret = regulator_enable(samsung_touchkey->regulator_vdd); > + if (ret) { > + regulator_disable(samsung_touchkey->regulator_vcc); > + return ret; > + } I would add a comment about the sleep here. > + msleep(150); > + } else { > + int err; > + > + err = regulator_disable(samsung_touchkey->regulator_vcc); > + if (err) > + ret = err; > + > + err = regulator_disable(samsung_touchkey->regulator_vdd); > + if (err && !ret) > + ret = err; > + } > + samsung_touchkey->power_onoff = onoff; > + > + return ret; > +} > + > +static void tm2_touchkey_irq_work(struct work_struct *irq_work) > +{ > + struct tm2_touchkey_data *samsung_touchkey = > + container_of(irq_work, struct tm2_touchkey_data, irq_work); > + > + if (!samsung_touchkey->pressed) { > + input_report_key(samsung_touchkey->input_dev, KEY_PHONE, 0); > + input_report_key(samsung_touchkey->input_dev, KEY_BACK, 0); > + } else { > + if (samsung_touchkey->keycode_type == TM2_TOUCHKEY_KEY_MENU) > + input_report_key(samsung_touchkey->input_dev, > + KEY_PHONE, 1); > + else > + input_report_key(samsung_touchkey->input_dev, > + KEY_BACK, 1); > + } > + input_sync(samsung_touchkey->input_dev); > +} > + > +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid) > +{ > + struct tm2_touchkey_data *samsung_touchkey = devid; > + u32 data; > + > + data = i2c_smbus_read_byte_data(samsung_touchkey->client, > + TM2_TOUCHKEY_KEYCODE_REG); > + > + if (data < 0) { > + dev_err(&samsung_touchkey->client->dev, "Failed to read i2c data\n"); > + return IRQ_HANDLED; > + } > + > + samsung_touchkey->keycode_type = data & TM2_TOUCHKEY_BIT_KEYCODE; > + samsung_touchkey->pressed = !(data & TM2_TOUCHKEY_BIT_PRESS_EV); > + > + if (samsung_touchkey->keycode_type != TM2_TOUCHKEY_KEY_MENU && > + samsung_touchkey->keycode_type != TM2_TOUCHKEY_KEY_BACK) Shouldn't at least a debug message be printed here so the user can know that an error occurred and a correct keycode was not received? > + return IRQ_HANDLED; > + > + schedule_work(&samsung_touchkey->irq_work); > + > + return IRQ_HANDLED; > +} > + > +static int tm2_touchkey_probe(struct i2c_client *client, > + const struct i2c_device_id *id) > +{ > + struct tm2_touchkey_data *samsung_touchkey; > + int ret; > + > + ret = i2c_check_functionality(client->adapter, > + I2C_FUNC_SMBUS_BYTE | > + I2C_FUNC_SMBUS_BYTE_DATA); > + if (!ret) { > + dev_err(&client->dev, "No I2C functionality found\n"); > + return -ENODEV; > + } > + > + samsung_touchkey = devm_kzalloc(&client->dev, > + sizeof(struct tm2_touchkey_data), GFP_KERNEL); > + > + if (!samsung_touchkey) { > + dev_err(&client->dev, "Failed to allocate memory.\n"); > + return -ENOMEM; > + } > + > + samsung_touchkey->client = client; > + i2c_set_clientdata(client, samsung_touchkey); > + INIT_WORK(&samsung_touchkey->irq_work, tm2_touchkey_irq_work); > + > + /* regulator */ > + samsung_touchkey->regulator_vcc = > + devm_regulator_get(&client->dev, "vcc"); > + if (IS_ERR(samsung_touchkey->regulator_vcc)) { > + dev_err(&client->dev, "Failed to get vcc regulator\n"); > + return PTR_ERR(samsung_touchkey->regulator_vcc); > + } > + > + samsung_touchkey->regulator_vdd = > + devm_regulator_get(&client->dev, "vdd"); > + if (IS_ERR(samsung_touchkey->regulator_vdd)) { > + dev_err(&client->dev, "Failed to get vdd regulator\n"); > + return PTR_ERR(samsung_touchkey->regulator_vcc); > + } > + > + /* power */ > + ret = tm2_touchkey_power_enable(samsung_touchkey); > + if (ret) { > + dev_err(&client->dev, "Failed to enable power\n"); > + return ret; > + } > + > + /* irq */ > + ret = devm_request_threaded_irq(&client->dev, > + client->irq, NULL, > + tm2_touchkey_irq_handler, > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, > + TM2_TOUCHKEY_DEV_NAME, > + samsung_touchkey); > + if (ret) { > + dev_err(&client->dev, "Failed to request threaded irq\n"); > + return ret; > + } > + > + /* input device */ > + samsung_touchkey->input_dev = devm_input_allocate_device(&client->dev); > + if (!samsung_touchkey->input_dev) { > + dev_err(&client->dev, "Failed to alloc input device.\n"); > + return -ENOMEM; > + } > + samsung_touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME; > + samsung_touchkey->input_dev->id.bustype = BUS_I2C; > + samsung_touchkey->input_dev->dev.parent = &client->dev; > + > + set_bit(EV_KEY, samsung_touchkey->input_dev->evbit); > + set_bit(KEY_PHONE, samsung_touchkey->input_dev->keybit); > + set_bit(KEY_BACK, samsung_touchkey->input_dev->keybit); > + input_set_drvdata(samsung_touchkey->input_dev, samsung_touchkey); > + > + ret = input_register_device(samsung_touchkey->input_dev); > + if (ret) { > + dev_err(&client->dev, "Failed to register input device.\n"); > + return ret; > + } > + > + /* led device */ > + samsung_touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME; > + samsung_touchkey->led_dev.brightness = LED_FULL; > + samsung_touchkey->led_dev.max_brightness = LED_FULL; > + samsung_touchkey->led_dev.brightness_set = > + tm2_touchkey_led_brightness_set; > + > + ret = devm_led_classdev_register(&client->dev, > + &samsung_touchkey->led_dev); > + if (ret < 0) { > + dev_err(&client->dev, "Failed to register touchkey led\n"); > + return ret; > + } > + > + return 0; > +} > + > +static void tm2_touchkey_shutdown(struct i2c_client *client) > +{ > + struct tm2_touchkey_data *samsung_touchkey = > + i2c_get_clientdata(client); > + int ret; > + > + disable_irq(client->irq); > + ret = tm2_touchkey_power_disable(samsung_touchkey); > + if (ret) > + dev_err(&client->dev, "Failed to disable power\n"); > +} > + > +static int tm2_touchkey_suspend(struct device *dev) > +{ > + struct tm2_touchkey_data *samsung_touchkey = dev_get_drvdata(dev); > + int ret; > + > + disable_irq(samsung_touchkey->client->irq); > + ret = tm2_touchkey_power_disable(samsung_touchkey); > + if (ret) > + dev_err(dev, "Failed to disable power\n"); > + > + return ret; > +} These two functions are basically the same, can you factor it out? > + > +static int tm2_touchkey_resume(struct device *dev) > +{ > + struct tm2_touchkey_data *samsung_touchkey = dev_get_drvdata(dev); > + int ret; > + > + enable_irq(samsung_touchkey->client->irq); > + ret = tm2_touchkey_power_enable(samsung_touchkey); > + if (ret) > + dev_err(dev, "Failed to enable power\n"); > + > + return ret; > +} > + > +static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops, tm2_touchkey_suspend, > + tm2_touchkey_resume); > + > +static const struct i2c_device_id tm2_touchkey_id_table[] = { > + {TM2_TOUCHKEY_DEV_NAME, 0}, > + {}, > +}; > + You need a MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table) here so the module can be autoloaded when the device is registered. > +static const struct of_device_id tm2_touchkey_of_match[] = { > + {.compatible = "samsung,tm2-touchkey",}, > + {}, > +}; > + Here a MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match) is not strictly needed since the I2C core always reports MODALIAS of the form i2c:<dev> but still is good to have so the I2C core can be fixed at some point. > +static struct i2c_driver tm2_touchkey_driver = { > + .driver = { > + .name = TM2_TOUCHKEY_DEV_NAME, > + .pm = &tm2_touchkey_pm_ops, > + .of_match_table = of_match_ptr(tm2_touchkey_of_match), > + }, > + .probe = tm2_touchkey_probe, > + .shutdown = tm2_touchkey_shutdown, > + .id_table = tm2_touchkey_id_table, > +}; > + > +module_i2c_driver(tm2_touchkey_driver); > + > +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); > +MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>"); > +MODULE_DESCRIPTION("Samsung touchkey driver"); > +MODULE_LICENSE("GPL v2"); > The rest looks good to me, so after the changes I suggested: Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com> Best regards,
On Tue, Jan 03, 2017 at 04:57:15PM +0900, Jaechul Lee wrote: > This patch adds support for the TM2 touch key and led > functionlity. > > The driver interfaces with userspace through an input device and > reports KEY_PHONE and KEY_BACK event types. LED brightness can be > controlled by "/sys/class/leds/tm2-touchkey/brightness". > > Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> > Signed-off-by: Beomho Seo <beomho.seo@samsung.com> > --- > drivers/input/keyboard/Kconfig | 11 ++ > drivers/input/keyboard/Makefile | 1 + > drivers/input/keyboard/tm2-touchkey.c | 326 ++++++++++++++++++++++++++++++++++ > 3 files changed, 338 insertions(+) > create mode 100644 drivers/input/keyboard/tm2-touchkey.c > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > index cbd75cf..72c0ba1 100644 > --- a/drivers/input/keyboard/Kconfig > +++ b/drivers/input/keyboard/Kconfig > @@ -666,6 +666,17 @@ config KEYBOARD_TC3589X > To compile this driver as a module, choose M here: the > module will be called tc3589x-keypad. > > +config KEYBOARD_TM2_TOUCHKEY > + tristate "tm2-touchkey support" > + depends on I2C > + help > + Say Y here to enable the tm2-touchkey. The ending full stop is not needed. > + touchkey driver for tm2. This driver can enable > + the interrupt and make input events and control led brightness. This sentence needs improvements. How about just: "Beside input device, this driver provides also brightness control for LEDs on touch keys." Best regards, Krzysztof -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, Jan 03, 2017 at 10:11:39AM -0300, Javier Martinez Canillas wrote: > Hello Jaechul, > > On 01/03/2017 04:57 AM, Jaechul Lee wrote: > > This patch adds support for the TM2 touch key and led > > functionlity. > > > > s/functionlity/functionality > > > The driver interfaces with userspace through an input device and > > reports KEY_PHONE and KEY_BACK event types. LED brightness can be > > controlled by "/sys/class/leds/tm2-touchkey/brightness". > > > > Signed-off-by: Jaechul Lee <jcsing.lee@samsung.com> > > Signed-off-by: Beomho Seo <beomho.seo@samsung.com> > > --- > > drivers/input/keyboard/Kconfig | 11 ++ > > drivers/input/keyboard/Makefile | 1 + > > drivers/input/keyboard/tm2-touchkey.c | 326 ++++++++++++++++++++++++++++++++++ > > 3 files changed, 338 insertions(+) > > create mode 100644 drivers/input/keyboard/tm2-touchkey.c > > > > diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig > > index cbd75cf..72c0ba1 100644 > > --- a/drivers/input/keyboard/Kconfig > > +++ b/drivers/input/keyboard/Kconfig > > @@ -666,6 +666,17 @@ config KEYBOARD_TC3589X > > To compile this driver as a module, choose M here: the > > module will be called tc3589x-keypad. > > > > +config KEYBOARD_TM2_TOUCHKEY > > + tristate "tm2-touchkey support" > > + depends on I2C There should be LED dependency as well. > > + help > > + Say Y here to enable the tm2-touchkey. > > + touchkey driver for tm2. This driver can enable > > + the interrupt and make input events and control led brightness. > > + > > + To compile this driver as a module, choose M here. > > + module will be called tm2-touchkey > > + > > config KEYBOARD_TWL4030 > > tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" > > depends on TWL4030_CORE > > diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile > > index d9f4cfc..7d9acff 100644 > > --- a/drivers/input/keyboard/Makefile > > +++ b/drivers/input/keyboard/Makefile > > @@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o > > obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o > > obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o > > obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o > > +obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o > > obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o > > obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o > > obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o > > diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c > > new file mode 100644 > > index 0000000..d9575d8 > > --- /dev/null > > +++ b/drivers/input/keyboard/tm2-touchkey.c > > @@ -0,0 +1,326 @@ > > +/* > > + * Driver for keys on GPIO lines capable of generating interrupts. This does not match what the driver does. > > + * > > + * Copyright 2005 Phil Blundell > > + * Copyright 2016 Samsung Electronics Co., Ltd. > > + * > > + * Author: Beomho Seo <beomho.seo@samsung.com> > > + * Author: Jaechul Lee <jcsing.lee@samsung.com> > > + * > > + * This program is free software; you can redistribute it and/or modify > > + * it under the terms of the GNU General Public License version 2 as > > + * published by the Free Software Foundation. > > + */ > > + > > +#include <linux/bitops.h> > > +#include <linux/delay.h> > > +#include <linux/device.h> > > +#include <linux/i2c.h> > > +#include <linux/input.h> > > +#include <linux/interrupt.h> > > +#include <linux/irq.h> > > +#include <linux/leds.h> > > +#include <linux/module.h> > > +#include <linux/of.h> > > +#include <linux/pm.h> > > +#include <linux/regulator/consumer.h> > > +#include <linux/workqueue.h> > > + > > +#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey" > > +#define TM2_TOUCHKEY_KEYCODE_REG 0x03 > > +#define TM2_TOUCHKEY_BASE_REG 0x00 > > +#define TM2_TOUCHKEY_CMD_LED_ON 0x10 > > +#define TM2_TOUCHKEY_CMD_LED_OFF 0x20 > > +#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3) > > +#define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0) > > +#define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000 > > +#define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000 > > + > > +enum { > > + TM2_TOUCHKEY_KEY_MENU = 0x1, > > + TM2_TOUCHKEY_KEY_BACK, > > +}; > > + > > +#define tm2_touchkey_power_enable(x) __tm2_touchkey_power_onoff(x, 1) > > +#define tm2_touchkey_power_disable(x) __tm2_touchkey_power_onoff(x, 0) > > + > > +struct tm2_touchkey_data { > > + struct i2c_client *client; > > + struct input_dev *input_dev; > > + struct led_classdev led_dev; > > + > > + u8 keycode_type; > > + u8 pressed; > > + struct work_struct irq_work; > > + > > + bool power_onoff; > > + struct regulator *regulator_vcc; /* 1.8V */ > > + struct regulator *regulator_vdd; /* 3.3V */ > > +}; > > + > > +static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, > > + enum led_brightness brightness) > > +{ > > + struct tm2_touchkey_data *samsung_touchkey = Just call it "touchkey", "samsung_touchkey" is too long for a local variable. > > + container_of(led_dev, struct tm2_touchkey_data, led_dev); > > + u32 volt; > > + u8 data; > > + > > + if (brightness == LED_OFF) { > > + volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN; > > + data = TM2_TOUCHKEY_CMD_LED_OFF; > > + } else { > > + volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX; > > + data = TM2_TOUCHKEY_CMD_LED_ON; > > + } > > + > > + regulator_set_voltage(samsung_touchkey->regulator_vdd, volt, volt); > > + i2c_smbus_write_byte_data(samsung_touchkey->client, > > + TM2_TOUCHKEY_BASE_REG, data); > > +} > > + > > +static int __tm2_touchkey_power_onoff(struct tm2_touchkey_data > > + *samsung_touchkey, bool onoff) > > +{ > > + int ret = 0; > > + > > + if (samsung_touchkey->power_onoff == onoff) > > + return ret; > > + > > + if (onoff) { > > + ret = regulator_enable(samsung_touchkey->regulator_vcc); > > + if (ret) > > + return ret; > > + > > + ret = regulator_enable(samsung_touchkey->regulator_vdd); > > + if (ret) { > > + regulator_disable(samsung_touchkey->regulator_vcc); > > + return ret; > > + } > > I would add a comment about the sleep here. Also "bulk" regulator API can be useful here. > > > + msleep(150); > > + } else { > > + int err; > > + > > + err = regulator_disable(samsung_touchkey->regulator_vcc); > > + if (err) > > + ret = err; > > + > > + err = regulator_disable(samsung_touchkey->regulator_vdd); > > + if (err && !ret) > > + ret = err; > > + } > > + samsung_touchkey->power_onoff = onoff; > > + > > + return ret; > > +} > > + > > +static void tm2_touchkey_irq_work(struct work_struct *irq_work) > > +{ > > + struct tm2_touchkey_data *samsung_touchkey = > > + container_of(irq_work, struct tm2_touchkey_data, irq_work); > > + > > + if (!samsung_touchkey->pressed) { > > + input_report_key(samsung_touchkey->input_dev, KEY_PHONE, 0); > > + input_report_key(samsung_touchkey->input_dev, KEY_BACK, 0); > > + } else { > > + if (samsung_touchkey->keycode_type == TM2_TOUCHKEY_KEY_MENU) > > + input_report_key(samsung_touchkey->input_dev, > > + KEY_PHONE, 1); > > + else > > + input_report_key(samsung_touchkey->input_dev, > > + KEY_BACK, 1); > > + } > > + input_sync(samsung_touchkey->input_dev); > > +} There is absolutely no reason for doing this in a work. Just call input_report_key/input_sync from your threaded IRQ routine. > > + > > +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid) > > +{ > > + struct tm2_touchkey_data *samsung_touchkey = devid; > > + u32 data; > > + > > + data = i2c_smbus_read_byte_data(samsung_touchkey->client, > > + TM2_TOUCHKEY_KEYCODE_REG); > > + > > + if (data < 0) { > > + dev_err(&samsung_touchkey->client->dev, "Failed to read i2c data\n"); > > + return IRQ_HANDLED; > > + } > > + > > + samsung_touchkey->keycode_type = data & TM2_TOUCHKEY_BIT_KEYCODE; > > + samsung_touchkey->pressed = !(data & TM2_TOUCHKEY_BIT_PRESS_EV); > > + > > + if (samsung_touchkey->keycode_type != TM2_TOUCHKEY_KEY_MENU && > > + samsung_touchkey->keycode_type != TM2_TOUCHKEY_KEY_BACK) > > Shouldn't at least a debug message be printed here so the user can > know that an error occurred and a correct keycode was not received? > > > + return IRQ_HANDLED; > > + > > + schedule_work(&samsung_touchkey->irq_work); > > + > > + return IRQ_HANDLED; > > +} > > + > > +static int tm2_touchkey_probe(struct i2c_client *client, > > + const struct i2c_device_id *id) > > +{ > > + struct tm2_touchkey_data *samsung_touchkey; > > + int ret; > > + > > + ret = i2c_check_functionality(client->adapter, > > + I2C_FUNC_SMBUS_BYTE | > > + I2C_FUNC_SMBUS_BYTE_DATA); > > + if (!ret) { > > + dev_err(&client->dev, "No I2C functionality found\n"); > > + return -ENODEV; > > + } > > + > > + samsung_touchkey = devm_kzalloc(&client->dev, > > + sizeof(struct tm2_touchkey_data), GFP_KERNEL); sizeof(*touchkey) > > + > > + if (!samsung_touchkey) { > > + dev_err(&client->dev, "Failed to allocate memory.\n"); > > + return -ENOMEM; > > + } > > + > > + samsung_touchkey->client = client; > > + i2c_set_clientdata(client, samsung_touchkey); > > + INIT_WORK(&samsung_touchkey->irq_work, tm2_touchkey_irq_work); Work is not needed. > > + > > + /* regulator */ > > + samsung_touchkey->regulator_vcc = > > + devm_regulator_get(&client->dev, "vcc"); > > + if (IS_ERR(samsung_touchkey->regulator_vcc)) { > > + dev_err(&client->dev, "Failed to get vcc regulator\n"); > > + return PTR_ERR(samsung_touchkey->regulator_vcc); > > + } > > + > > + samsung_touchkey->regulator_vdd = > > + devm_regulator_get(&client->dev, "vdd"); > > + if (IS_ERR(samsung_touchkey->regulator_vdd)) { > > + dev_err(&client->dev, "Failed to get vdd regulator\n"); > > + return PTR_ERR(samsung_touchkey->regulator_vcc); > > + } devm_regulator_bulk_get > > + > > + /* power */ > > + ret = tm2_touchkey_power_enable(samsung_touchkey); > > + if (ret) { > > + dev_err(&client->dev, "Failed to enable power\n"); > > + return ret; > > + } You need to install devm action (devm_add_action_or_reset) to disable power when unloading driver (or if initialization fails). > > + > > + /* irq */ > > + ret = devm_request_threaded_irq(&client->dev, > > + client->irq, NULL, > > + tm2_touchkey_irq_handler, > > + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, I'd rather we rely on IRQ trigger from DT, so just use IRQF_PNESHOT here. I'd rather you allocated input device before requesting IRQ. The registering input device is fine to do after getting IRQ. > > + TM2_TOUCHKEY_DEV_NAME, > > + samsung_touchkey); > > + if (ret) { > > + dev_err(&client->dev, "Failed to request threaded irq\n"); > > + return ret; > > + } > > + > > + /* input device */ > > + samsung_touchkey->input_dev = devm_input_allocate_device(&client->dev); > > + if (!samsung_touchkey->input_dev) { > > + dev_err(&client->dev, "Failed to alloc input device.\n"); > > + return -ENOMEM; > > + } > > + samsung_touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME; > > + samsung_touchkey->input_dev->id.bustype = BUS_I2C; > > + samsung_touchkey->input_dev->dev.parent = &client->dev; No need to set parent when using devm_input_allocate_device(), it is done automatically. > > + > > + set_bit(EV_KEY, samsung_touchkey->input_dev->evbit); > > + set_bit(KEY_PHONE, samsung_touchkey->input_dev->keybit); > > + set_bit(KEY_BACK, samsung_touchkey->input_dev->keybit); Just do input_set_capability(touchkey->input_dev, EV_KEY, KEY_PHONE); input_set_capability(touchkey->input_dev, EV_KEY, KEY_BACK); > > + input_set_drvdata(samsung_touchkey->input_dev, samsung_touchkey); > > + > > + ret = input_register_device(samsung_touchkey->input_dev); > > + if (ret) { > > + dev_err(&client->dev, "Failed to register input device.\n"); > > + return ret; > > + } > > + > > + /* led device */ > > + samsung_touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME; > > + samsung_touchkey->led_dev.brightness = LED_FULL; > > + samsung_touchkey->led_dev.max_brightness = LED_FULL; > > + samsung_touchkey->led_dev.brightness_set = > > + tm2_touchkey_led_brightness_set; > > + > > + ret = devm_led_classdev_register(&client->dev, > > + &samsung_touchkey->led_dev); > > + if (ret < 0) { > > + dev_err(&client->dev, "Failed to register touchkey led\n"); > > + return ret; > > + } > > + > > + return 0; > > +} > > + > > +static void tm2_touchkey_shutdown(struct i2c_client *client) > > +{ This is something not normally done. Does your platform really keep rails on when AP is off? > > + struct tm2_touchkey_data *samsung_touchkey = > > + i2c_get_clientdata(client); > > + int ret; > > + > > + disable_irq(client->irq); > > + ret = tm2_touchkey_power_disable(samsung_touchkey); > > + if (ret) > > + dev_err(&client->dev, "Failed to disable power\n"); > > +} > > + > > +static int tm2_touchkey_suspend(struct device *dev) __maybe_unused > > +{ > > + struct tm2_touchkey_data *samsung_touchkey = dev_get_drvdata(dev); > > + int ret; > > + > > + disable_irq(samsung_touchkey->client->irq); > > + ret = tm2_touchkey_power_disable(samsung_touchkey); > > + if (ret) > > + dev_err(dev, "Failed to disable power\n"); > > + > > + return ret; > > +} > > These two functions are basically the same, can you factor it out? > > > + > > +static int tm2_touchkey_resume(struct device *dev) __maybe_unused > > +{ > > + struct tm2_touchkey_data *samsung_touchkey = dev_get_drvdata(dev); > > + int ret; > > + > > + enable_irq(samsung_touchkey->client->irq); > > + ret = tm2_touchkey_power_enable(samsung_touchkey); > > + if (ret) > > + dev_err(dev, "Failed to enable power\n"); > > + > > + return ret; > > +} > > + > > +static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops, tm2_touchkey_suspend, > > + tm2_touchkey_resume); > > + > > +static const struct i2c_device_id tm2_touchkey_id_table[] = { > > + {TM2_TOUCHKEY_DEV_NAME, 0}, > > + {}, > > +}; > > + > > You need a MODULE_DEVICE_TABLE(i2c, tm2_touchkey_id_table) here so the > module can be autoloaded when the device is registered. > > > +static const struct of_device_id tm2_touchkey_of_match[] = { > > + {.compatible = "samsung,tm2-touchkey",}, > > + {}, > > +}; > > + > > Here a MODULE_DEVICE_TABLE(of, tm2_touchkey_of_match) is not strictly > needed since the I2C core always reports MODALIAS of the form i2c:<dev> > but still is good to have so the I2C core can be fixed at some point. Yes, please add MODULE_DEVICE_TABLE(of, ...). > > > +static struct i2c_driver tm2_touchkey_driver = { > > + .driver = { > > + .name = TM2_TOUCHKEY_DEV_NAME, > > + .pm = &tm2_touchkey_pm_ops, > > + .of_match_table = of_match_ptr(tm2_touchkey_of_match), > > + }, > > + .probe = tm2_touchkey_probe, > > + .shutdown = tm2_touchkey_shutdown, > > + .id_table = tm2_touchkey_id_table, > > +}; > > + > > +module_i2c_driver(tm2_touchkey_driver); > > + > > +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); > > +MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>"); > > +MODULE_DESCRIPTION("Samsung touchkey driver"); > > +MODULE_LICENSE("GPL v2"); > > Thanks.
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index cbd75cf..72c0ba1 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -666,6 +666,17 @@ config KEYBOARD_TC3589X To compile this driver as a module, choose M here: the module will be called tc3589x-keypad. +config KEYBOARD_TM2_TOUCHKEY + tristate "tm2-touchkey support" + depends on I2C + help + Say Y here to enable the tm2-touchkey. + touchkey driver for tm2. This driver can enable + the interrupt and make input events and control led brightness. + + To compile this driver as a module, choose M here. + module will be called tm2-touchkey + config KEYBOARD_TWL4030 tristate "TI TWL4030/TWL5030/TPS659x0 keypad support" depends on TWL4030_CORE diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index d9f4cfc..7d9acff 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -61,6 +61,7 @@ obj-$(CONFIG_KEYBOARD_SUN4I_LRADC) += sun4i-lradc-keys.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TC3589X) += tc3589x-keypad.o obj-$(CONFIG_KEYBOARD_TEGRA) += tegra-kbc.o +obj-$(CONFIG_KEYBOARD_TM2_TOUCHKEY) += tm2-touchkey.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o obj-$(CONFIG_KEYBOARD_XTKBD) += xtkbd.o obj-$(CONFIG_KEYBOARD_W90P910) += w90p910_keypad.o diff --git a/drivers/input/keyboard/tm2-touchkey.c b/drivers/input/keyboard/tm2-touchkey.c new file mode 100644 index 0000000..d9575d8 --- /dev/null +++ b/drivers/input/keyboard/tm2-touchkey.c @@ -0,0 +1,326 @@ +/* + * Driver for keys on GPIO lines capable of generating interrupts. + * + * Copyright 2005 Phil Blundell + * Copyright 2016 Samsung Electronics Co., Ltd. + * + * Author: Beomho Seo <beomho.seo@samsung.com> + * Author: Jaechul Lee <jcsing.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bitops.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/leds.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/pm.h> +#include <linux/regulator/consumer.h> +#include <linux/workqueue.h> + +#define TM2_TOUCHKEY_DEV_NAME "tm2-touchkey" +#define TM2_TOUCHKEY_KEYCODE_REG 0x03 +#define TM2_TOUCHKEY_BASE_REG 0x00 +#define TM2_TOUCHKEY_CMD_LED_ON 0x10 +#define TM2_TOUCHKEY_CMD_LED_OFF 0x20 +#define TM2_TOUCHKEY_BIT_PRESS_EV BIT(3) +#define TM2_TOUCHKEY_BIT_KEYCODE GENMASK(2, 0) +#define TM2_TOUCHKEY_LED_VOLTAGE_MIN 2500000 +#define TM2_TOUCHKEY_LED_VOLTAGE_MAX 3300000 + +enum { + TM2_TOUCHKEY_KEY_MENU = 0x1, + TM2_TOUCHKEY_KEY_BACK, +}; + +#define tm2_touchkey_power_enable(x) __tm2_touchkey_power_onoff(x, 1) +#define tm2_touchkey_power_disable(x) __tm2_touchkey_power_onoff(x, 0) + +struct tm2_touchkey_data { + struct i2c_client *client; + struct input_dev *input_dev; + struct led_classdev led_dev; + + u8 keycode_type; + u8 pressed; + struct work_struct irq_work; + + bool power_onoff; + struct regulator *regulator_vcc; /* 1.8V */ + struct regulator *regulator_vdd; /* 3.3V */ +}; + +static void tm2_touchkey_led_brightness_set(struct led_classdev *led_dev, + enum led_brightness brightness) +{ + struct tm2_touchkey_data *samsung_touchkey = + container_of(led_dev, struct tm2_touchkey_data, led_dev); + u32 volt; + u8 data; + + if (brightness == LED_OFF) { + volt = TM2_TOUCHKEY_LED_VOLTAGE_MIN; + data = TM2_TOUCHKEY_CMD_LED_OFF; + } else { + volt = TM2_TOUCHKEY_LED_VOLTAGE_MAX; + data = TM2_TOUCHKEY_CMD_LED_ON; + } + + regulator_set_voltage(samsung_touchkey->regulator_vdd, volt, volt); + i2c_smbus_write_byte_data(samsung_touchkey->client, + TM2_TOUCHKEY_BASE_REG, data); +} + +static int __tm2_touchkey_power_onoff(struct tm2_touchkey_data + *samsung_touchkey, bool onoff) +{ + int ret = 0; + + if (samsung_touchkey->power_onoff == onoff) + return ret; + + if (onoff) { + ret = regulator_enable(samsung_touchkey->regulator_vcc); + if (ret) + return ret; + + ret = regulator_enable(samsung_touchkey->regulator_vdd); + if (ret) { + regulator_disable(samsung_touchkey->regulator_vcc); + return ret; + } + msleep(150); + } else { + int err; + + err = regulator_disable(samsung_touchkey->regulator_vcc); + if (err) + ret = err; + + err = regulator_disable(samsung_touchkey->regulator_vdd); + if (err && !ret) + ret = err; + } + samsung_touchkey->power_onoff = onoff; + + return ret; +} + +static void tm2_touchkey_irq_work(struct work_struct *irq_work) +{ + struct tm2_touchkey_data *samsung_touchkey = + container_of(irq_work, struct tm2_touchkey_data, irq_work); + + if (!samsung_touchkey->pressed) { + input_report_key(samsung_touchkey->input_dev, KEY_PHONE, 0); + input_report_key(samsung_touchkey->input_dev, KEY_BACK, 0); + } else { + if (samsung_touchkey->keycode_type == TM2_TOUCHKEY_KEY_MENU) + input_report_key(samsung_touchkey->input_dev, + KEY_PHONE, 1); + else + input_report_key(samsung_touchkey->input_dev, + KEY_BACK, 1); + } + input_sync(samsung_touchkey->input_dev); +} + +static irqreturn_t tm2_touchkey_irq_handler(int irq, void *devid) +{ + struct tm2_touchkey_data *samsung_touchkey = devid; + u32 data; + + data = i2c_smbus_read_byte_data(samsung_touchkey->client, + TM2_TOUCHKEY_KEYCODE_REG); + + if (data < 0) { + dev_err(&samsung_touchkey->client->dev, "Failed to read i2c data\n"); + return IRQ_HANDLED; + } + + samsung_touchkey->keycode_type = data & TM2_TOUCHKEY_BIT_KEYCODE; + samsung_touchkey->pressed = !(data & TM2_TOUCHKEY_BIT_PRESS_EV); + + if (samsung_touchkey->keycode_type != TM2_TOUCHKEY_KEY_MENU && + samsung_touchkey->keycode_type != TM2_TOUCHKEY_KEY_BACK) + return IRQ_HANDLED; + + schedule_work(&samsung_touchkey->irq_work); + + return IRQ_HANDLED; +} + +static int tm2_touchkey_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct tm2_touchkey_data *samsung_touchkey; + int ret; + + ret = i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA); + if (!ret) { + dev_err(&client->dev, "No I2C functionality found\n"); + return -ENODEV; + } + + samsung_touchkey = devm_kzalloc(&client->dev, + sizeof(struct tm2_touchkey_data), GFP_KERNEL); + + if (!samsung_touchkey) { + dev_err(&client->dev, "Failed to allocate memory.\n"); + return -ENOMEM; + } + + samsung_touchkey->client = client; + i2c_set_clientdata(client, samsung_touchkey); + INIT_WORK(&samsung_touchkey->irq_work, tm2_touchkey_irq_work); + + /* regulator */ + samsung_touchkey->regulator_vcc = + devm_regulator_get(&client->dev, "vcc"); + if (IS_ERR(samsung_touchkey->regulator_vcc)) { + dev_err(&client->dev, "Failed to get vcc regulator\n"); + return PTR_ERR(samsung_touchkey->regulator_vcc); + } + + samsung_touchkey->regulator_vdd = + devm_regulator_get(&client->dev, "vdd"); + if (IS_ERR(samsung_touchkey->regulator_vdd)) { + dev_err(&client->dev, "Failed to get vdd regulator\n"); + return PTR_ERR(samsung_touchkey->regulator_vcc); + } + + /* power */ + ret = tm2_touchkey_power_enable(samsung_touchkey); + if (ret) { + dev_err(&client->dev, "Failed to enable power\n"); + return ret; + } + + /* irq */ + ret = devm_request_threaded_irq(&client->dev, + client->irq, NULL, + tm2_touchkey_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + TM2_TOUCHKEY_DEV_NAME, + samsung_touchkey); + if (ret) { + dev_err(&client->dev, "Failed to request threaded irq\n"); + return ret; + } + + /* input device */ + samsung_touchkey->input_dev = devm_input_allocate_device(&client->dev); + if (!samsung_touchkey->input_dev) { + dev_err(&client->dev, "Failed to alloc input device.\n"); + return -ENOMEM; + } + samsung_touchkey->input_dev->name = TM2_TOUCHKEY_DEV_NAME; + samsung_touchkey->input_dev->id.bustype = BUS_I2C; + samsung_touchkey->input_dev->dev.parent = &client->dev; + + set_bit(EV_KEY, samsung_touchkey->input_dev->evbit); + set_bit(KEY_PHONE, samsung_touchkey->input_dev->keybit); + set_bit(KEY_BACK, samsung_touchkey->input_dev->keybit); + input_set_drvdata(samsung_touchkey->input_dev, samsung_touchkey); + + ret = input_register_device(samsung_touchkey->input_dev); + if (ret) { + dev_err(&client->dev, "Failed to register input device.\n"); + return ret; + } + + /* led device */ + samsung_touchkey->led_dev.name = TM2_TOUCHKEY_DEV_NAME; + samsung_touchkey->led_dev.brightness = LED_FULL; + samsung_touchkey->led_dev.max_brightness = LED_FULL; + samsung_touchkey->led_dev.brightness_set = + tm2_touchkey_led_brightness_set; + + ret = devm_led_classdev_register(&client->dev, + &samsung_touchkey->led_dev); + if (ret < 0) { + dev_err(&client->dev, "Failed to register touchkey led\n"); + return ret; + } + + return 0; +} + +static void tm2_touchkey_shutdown(struct i2c_client *client) +{ + struct tm2_touchkey_data *samsung_touchkey = + i2c_get_clientdata(client); + int ret; + + disable_irq(client->irq); + ret = tm2_touchkey_power_disable(samsung_touchkey); + if (ret) + dev_err(&client->dev, "Failed to disable power\n"); +} + +static int tm2_touchkey_suspend(struct device *dev) +{ + struct tm2_touchkey_data *samsung_touchkey = dev_get_drvdata(dev); + int ret; + + disable_irq(samsung_touchkey->client->irq); + ret = tm2_touchkey_power_disable(samsung_touchkey); + if (ret) + dev_err(dev, "Failed to disable power\n"); + + return ret; +} + +static int tm2_touchkey_resume(struct device *dev) +{ + struct tm2_touchkey_data *samsung_touchkey = dev_get_drvdata(dev); + int ret; + + enable_irq(samsung_touchkey->client->irq); + ret = tm2_touchkey_power_enable(samsung_touchkey); + if (ret) + dev_err(dev, "Failed to enable power\n"); + + return ret; +} + +static SIMPLE_DEV_PM_OPS(tm2_touchkey_pm_ops, tm2_touchkey_suspend, + tm2_touchkey_resume); + +static const struct i2c_device_id tm2_touchkey_id_table[] = { + {TM2_TOUCHKEY_DEV_NAME, 0}, + {}, +}; + +static const struct of_device_id tm2_touchkey_of_match[] = { + {.compatible = "samsung,tm2-touchkey",}, + {}, +}; + +static struct i2c_driver tm2_touchkey_driver = { + .driver = { + .name = TM2_TOUCHKEY_DEV_NAME, + .pm = &tm2_touchkey_pm_ops, + .of_match_table = of_match_ptr(tm2_touchkey_of_match), + }, + .probe = tm2_touchkey_probe, + .shutdown = tm2_touchkey_shutdown, + .id_table = tm2_touchkey_id_table, +}; + +module_i2c_driver(tm2_touchkey_driver); + +MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>"); +MODULE_AUTHOR("Jaechul Lee <jcsing.lee@samsung.com>"); +MODULE_DESCRIPTION("Samsung touchkey driver"); +MODULE_LICENSE("GPL v2");