@@ -3,6 +3,7 @@
#
config RMI4_CORE
tristate "Synaptics RMI4 bus support"
+ select IRQ_DOMAIN
help
Say Y here if you want to support the Synaptics RMI4 bus. This is
required for all RMI4 device support.
@@ -9,6 +9,8 @@
#include <linux/kernel.h>
#include <linux/device.h>
+#include <linux/irq.h>
+#include <linux/irqdomain.h>
#include <linux/list.h>
#include <linux/pm.h>
#include <linux/rmi.h>
@@ -167,6 +169,37 @@ static inline void rmi_function_of_probe(struct rmi_function *fn)
{}
#endif
+static struct irq_chip rmi_irq_chip = {
+ .name = "rmi4",
+};
+
+static int rmi_create_function_irq(struct rmi_function *fn,
+ struct rmi_function_handler *handler) {
+ struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
+ int i, irq, error;
+
+ for (i = 0; i < fn->num_of_irqs; i++) {
+ set_bit(fn->irq_pos + i, fn->irq_mask);
+
+ irq = irq_create_mapping(drvdata->irqdomain,
+ fn->irq_pos + i);
+
+ irq_set_chip_data(irq, fn);
+ irq_set_chip_and_handler(irq, &rmi_irq_chip, handle_simple_irq);
+ irq_set_nested_thread(irq, 1);
+
+ error = devm_request_threaded_irq(&fn->dev, irq, NULL,
+ handler->attention, IRQF_ONESHOT,
+ dev_name(&fn->dev), fn);
+ if (error) {
+ dev_err(&fn->dev, "Failed registering IRQ %d\n", error);
+ return error;
+ }
+ }
+
+ return 0;
+}
+
static int rmi_function_probe(struct device *dev)
{
struct rmi_function *fn = to_rmi_function(dev);
@@ -178,7 +211,14 @@ static int rmi_function_probe(struct device *dev)
if (handler->probe) {
error = handler->probe(fn);
- return error;
+ if (error)
+ return error;
+ }
+
+ if (fn->num_of_irqs && handler->attention) {
+ error = rmi_create_function_irq(fn, handler);
+ if (error)
+ return error;
}
return 0;
@@ -76,7 +76,7 @@ struct rmi_function_handler {
void (*remove)(struct rmi_function *fn);
int (*config)(struct rmi_function *fn);
int (*reset)(struct rmi_function *fn);
- int (*attention)(struct rmi_function *fn, unsigned long *irq_bits);
+ irqreturn_t (*attention)(int irq, void *ctx);
int (*suspend)(struct rmi_function *fn);
int (*resume)(struct rmi_function *fn);
};
@@ -21,6 +21,7 @@
#include <linux/pm.h>
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/irqdomain.h>
#include <uapi/linux/input.h>
#include <linux/rmi.h>
#include "rmi_bus.h"
@@ -127,28 +128,11 @@ static int rmi_driver_process_config_requests(struct rmi_device *rmi_dev)
return 0;
}
-static void process_one_interrupt(struct rmi_driver_data *data,
- struct rmi_function *fn)
-{
- struct rmi_function_handler *fh;
-
- if (!fn || !fn->dev.driver)
- return;
-
- fh = to_rmi_function_handler(fn->dev.driver);
- if (fh->attention) {
- bitmap_and(data->fn_irq_bits, data->irq_status, fn->irq_mask,
- data->irq_count);
- if (!bitmap_empty(data->fn_irq_bits, data->irq_count))
- fh->attention(fn, data->fn_irq_bits);
- }
-}
-
static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
{
struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
struct device *dev = &rmi_dev->dev;
- struct rmi_function *entry;
+ int i;
int error;
if (!data)
@@ -173,16 +157,8 @@ static int rmi_process_interrupt_requests(struct rmi_device *rmi_dev)
*/
mutex_unlock(&data->irq_mutex);
- /*
- * It would be nice to be able to use irq_chip to handle these
- * nested IRQs. Unfortunately, most of the current customers for
- * this driver are using older kernels (3.0.x) that don't support
- * the features required for that. Once they've shifted to more
- * recent kernels (say, 3.3 and higher), this should be switched to
- * use irq_chip.
- */
- list_for_each_entry(entry, &data->function_list, node)
- process_one_interrupt(data, entry);
+ for_each_set_bit(i, data->irq_status, data->irq_count)
+ handle_nested_irq(irq_find_mapping(data->irqdomain, i));
if (data->input)
input_sync(data->input);
@@ -1000,9 +976,12 @@ EXPORT_SYMBOL_GPL(rmi_driver_resume);
static int rmi_driver_remove(struct device *dev)
{
struct rmi_device *rmi_dev = to_rmi_device(dev);
+ struct rmi_driver_data *data = dev_get_drvdata(&rmi_dev->dev);
rmi_disable_irq(rmi_dev, false);
+ irq_domain_remove(data->irqdomain);
+
rmi_f34_remove_sysfs(rmi_dev);
rmi_free_function_list(rmi_dev);
@@ -1034,7 +1013,8 @@ int rmi_probe_interrupts(struct rmi_driver_data *data)
{
struct rmi_device *rmi_dev = data->rmi_dev;
struct device *dev = &rmi_dev->dev;
- int irq_count;
+ struct device_node *rmi_of_node = rmi_dev->xport->dev->of_node;
+ int irq_count = 0;
size_t size;
int retval;
@@ -1045,7 +1025,6 @@ int rmi_probe_interrupts(struct rmi_driver_data *data)
* being accessed.
*/
rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Counting IRQs.\n", __func__);
- irq_count = 0;
data->bootloader_mode = false;
retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_count_irqs);
@@ -1057,6 +1036,14 @@ int rmi_probe_interrupts(struct rmi_driver_data *data)
if (data->bootloader_mode)
dev_warn(dev, "Device in bootloader mode.\n");
+ /* Allocate and register a linear revmap irq_domain */
+ data->irqdomain = irq_domain_add_linear(rmi_of_node, irq_count,
+ &irq_domain_simple_ops, data);
+ if (!data->irqdomain) {
+ dev_err(&rmi_dev->dev, "Failed to create IRQ domain\n");
+ return PTR_ERR(data->irqdomain);
+ }
+
data->irq_count = irq_count;
data->num_of_irq_regs = (data->irq_count + 7) / 8;
@@ -1079,10 +1066,9 @@ int rmi_init_functions(struct rmi_driver_data *data)
{
struct rmi_device *rmi_dev = data->rmi_dev;
struct device *dev = &rmi_dev->dev;
- int irq_count;
+ int irq_count = 0;
int retval;
- irq_count = 0;
rmi_dbg(RMI_DEBUG_CORE, dev, "%s: Creating functions.\n", __func__);
retval = rmi_scan_pdt(rmi_dev, &irq_count, rmi_create_function);
if (retval < 0) {
@@ -681,9 +681,9 @@ static int rmi_f01_resume(struct rmi_function *fn)
return 0;
}
-static int rmi_f01_attention(struct rmi_function *fn,
- unsigned long *irq_bits)
+static irqreturn_t rmi_f01_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct rmi_device *rmi_dev = fn->rmi_dev;
int error;
u8 device_status;
@@ -692,7 +692,7 @@ static int rmi_f01_attention(struct rmi_function *fn,
if (error) {
dev_err(&fn->dev,
"Failed to read device status: %d.\n", error);
- return error;
+ return IRQ_RETVAL(error);
}
if (RMI_F01_STATUS_BOOTLOADER(device_status))
@@ -704,11 +704,11 @@ static int rmi_f01_attention(struct rmi_function *fn,
error = rmi_dev->driver->reset_handler(rmi_dev);
if (error) {
dev_err(&fn->dev, "Device reset failed: %d\n", error);
- return error;
+ return IRQ_RETVAL(error);
}
}
- return 0;
+ return IRQ_HANDLED;
}
struct rmi_function_handler rmi_f01_handler = {
@@ -199,8 +199,9 @@ static int rmi_f03_config(struct rmi_function *fn)
return 0;
}
-static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f03_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct rmi_device *rmi_dev = fn->rmi_dev;
struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
struct f03_data *f03 = dev_get_drvdata(&fn->dev);
@@ -217,7 +218,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
/* First grab the data passed by the transport device */
if (drvdata->attn_data.size < ob_len) {
dev_warn(&fn->dev, "F03 interrupted, but data is missing!\n");
- return 0;
+ return IRQ_HANDLED;
}
memcpy(obs, drvdata->attn_data.data, ob_len);
@@ -233,7 +234,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
"%s: Failed to read F03 output buffers: %d\n",
__func__, error);
serio_interrupt(f03->serio, 0, SERIO_TIMEOUT);
- return error;
+ return IRQ_RETVAL(error);
}
}
@@ -259,7 +260,7 @@ static int rmi_f03_attention(struct rmi_function *fn, unsigned long *irq_bits)
serio_interrupt(f03->serio, ob_data, serio_flags);
}
- return 0;
+ return IRQ_HANDLED;
}
static void rmi_f03_remove(struct rmi_function *fn)
@@ -571,8 +571,7 @@ static inline u8 rmi_f11_parse_finger_state(const u8 *f_state, u8 n_finger)
static void rmi_f11_finger_handler(struct f11_data *f11,
struct rmi_2d_sensor *sensor,
- unsigned long *irq_bits, int num_irq_regs,
- int size)
+ int num_irq_regs, int size)
{
const u8 *f_state = f11->data.f_state;
u8 finger_state;
@@ -581,12 +580,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11,
int rel_fingers;
int abs_size = sensor->nbr_fingers * RMI_F11_ABS_BYTES;
- int abs_bits = bitmap_and(f11->result_bits, irq_bits, f11->abs_mask,
- num_irq_regs * 8);
- int rel_bits = bitmap_and(f11->result_bits, irq_bits, f11->rel_mask,
- num_irq_regs * 8);
-
- if (abs_bits) {
+ if (sensor->report_abs) {
if (abs_size > size)
abs_fingers = size / RMI_F11_ABS_BYTES;
else
@@ -606,7 +600,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11,
}
}
- if (rel_bits) {
+ if (sensor->report_rel) {
if ((abs_size + sensor->nbr_fingers * RMI_F11_REL_BYTES) > size)
rel_fingers = (size - abs_size) / RMI_F11_REL_BYTES;
else
@@ -616,7 +610,7 @@ static void rmi_f11_finger_handler(struct f11_data *f11,
rmi_f11_rel_pos_report(f11, i);
}
- if (abs_bits) {
+ if (sensor->report_abs) {
/*
* the absolute part is made in 2 parts to allow the kernel
* tracking to take place.
@@ -1275,8 +1269,9 @@ static int rmi_f11_config(struct rmi_function *fn)
return 0;
}
-static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f11_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct rmi_device *rmi_dev = fn->rmi_dev;
struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
struct f11_data *f11 = dev_get_drvdata(&fn->dev);
@@ -1302,13 +1297,13 @@ static int rmi_f11_attention(struct rmi_function *fn, unsigned long *irq_bits)
data_base_addr, f11->sensor.data_pkt,
f11->sensor.pkt_size);
if (error < 0)
- return error;
+ return IRQ_RETVAL(error);
}
- rmi_f11_finger_handler(f11, &f11->sensor, irq_bits,
- drvdata->num_of_irq_regs, valid_bytes);
+ rmi_f11_finger_handler(f11, &f11->sensor,
+ drvdata->num_of_irq_regs, valid_bytes);
- return 0;
+ return IRQ_HANDLED;
}
static int rmi_f11_resume(struct rmi_function *fn)
@@ -197,10 +197,10 @@ static void rmi_f12_process_objects(struct f12_data *f12, u8 *data1, int size)
rmi_2d_sensor_abs_report(sensor, &sensor->objs[i], i);
}
-static int rmi_f12_attention(struct rmi_function *fn,
- unsigned long *irq_nr_regs)
+static irqreturn_t rmi_f12_attention(int irq, void *ctx)
{
int retval;
+ struct rmi_function *fn = ctx;
struct rmi_device *rmi_dev = fn->rmi_dev;
struct rmi_driver_data *drvdata = dev_get_drvdata(&rmi_dev->dev);
struct f12_data *f12 = dev_get_drvdata(&fn->dev);
@@ -222,7 +222,7 @@ static int rmi_f12_attention(struct rmi_function *fn,
if (retval < 0) {
dev_err(&fn->dev, "Failed to read object data. Code: %d.\n",
retval);
- return retval;
+ return IRQ_RETVAL(retval);
}
}
@@ -232,7 +232,7 @@ static int rmi_f12_attention(struct rmi_function *fn,
input_mt_sync_frame(sensor->input);
- return 0;
+ return IRQ_HANDLED;
}
static int rmi_f12_write_control_regs(struct rmi_function *fn)
@@ -122,8 +122,9 @@ static void rmi_f30_report_button(struct rmi_function *fn,
}
}
-static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f30_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct f30_data *f30 = dev_get_drvdata(&fn->dev);
struct rmi_driver_data *drvdata = dev_get_drvdata(&fn->rmi_dev->dev);
int error;
@@ -134,7 +135,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
if (drvdata->attn_data.size < f30->register_count) {
dev_warn(&fn->dev,
"F30 interrupted, but data is missing\n");
- return 0;
+ return IRQ_HANDLED;
}
memcpy(f30->data_regs, drvdata->attn_data.data,
f30->register_count);
@@ -147,7 +148,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
dev_err(&fn->dev,
"%s: Failed to read F30 data registers: %d\n",
__func__, error);
- return error;
+ return IRQ_RETVAL(error);
}
}
@@ -159,7 +160,7 @@ static int rmi_f30_attention(struct rmi_function *fn, unsigned long *irq_bits)
rmi_f03_commit_buttons(f30->f03);
}
- return 0;
+ return IRQ_HANDLED;
}
static int rmi_f30_config(struct rmi_function *fn)
@@ -101,8 +101,9 @@ static int rmi_f34_command(struct f34_data *f34, u8 command,
return 0;
}
-static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits)
+static irqreturn_t rmi_f34_attention(int irq, void *ctx)
{
+ struct rmi_function *fn = ctx;
struct f34_data *f34 = dev_get_drvdata(&fn->dev);
int ret;
u8 status;
@@ -127,7 +128,7 @@ static int rmi_f34_attention(struct rmi_function *fn, unsigned long *irq_bits)
complete(&f34->v7.cmd_done);
}
- return 0;
+ return IRQ_HANDLED;
}
static int rmi_f34_write_blocks(struct f34_data *f34, const void *data,
@@ -610,11 +610,6 @@ static void rmi_f54_work(struct work_struct *work)
mutex_unlock(&f54->data_mutex);
}
-static int rmi_f54_attention(struct rmi_function *fn, unsigned long *irqbits)
-{
- return 0;
-}
-
static int rmi_f54_config(struct rmi_function *fn)
{
struct rmi_driver *drv = fn->rmi_dev->driver;
@@ -756,6 +751,5 @@ struct rmi_function_handler rmi_f54_handler = {
.func = 0x54,
.probe = rmi_f54_probe,
.config = rmi_f54_config,
- .attention = rmi_f54_attention,
.remove = rmi_f54_remove,
};
@@ -354,6 +354,8 @@ struct rmi_driver_data {
struct mutex irq_mutex;
struct input_dev *input;
+ struct irq_domain *irqdomain;
+
u8 pdt_props;
u8 num_rx_electrodes;
Convert the RMI driver to use the standard mechanism for distributing IRQs to the various functions. Tested on: * S7300 (F11, F34, F54) * S7817 (F12, F34, F54) Signed-off-by: Nick Dyer <nick@shmanahar.org> --- drivers/input/rmi4/Kconfig | 1 + drivers/input/rmi4/rmi_bus.c | 42 +++++++++++++++++++++++++++++++++- drivers/input/rmi4/rmi_bus.h | 2 +- drivers/input/rmi4/rmi_driver.c | 50 +++++++++++++++-------------------------- drivers/input/rmi4/rmi_f01.c | 10 ++++----- drivers/input/rmi4/rmi_f03.c | 9 ++++---- drivers/input/rmi4/rmi_f11.c | 25 +++++++++------------ drivers/input/rmi4/rmi_f12.c | 8 +++---- drivers/input/rmi4/rmi_f30.c | 9 ++++---- drivers/input/rmi4/rmi_f34.c | 5 +++-- drivers/input/rmi4/rmi_f54.c | 6 ----- include/linux/rmi.h | 2 ++ 12 files changed, 95 insertions(+), 74 deletions(-)