@@ -1286,4 +1286,14 @@ config TOUCHSCREEN_ROHM_BU21023
To compile this driver as a module, choose M here: the
module will be called bu21023_ts.
+config TOUCHSCREEN_IQS5XX
+ tristate "Azoteq IQS550/572/525 trackpad/touchscreen controller"
+ depends on I2C
+ help
+ Say Y to enable support for the Azoteq IQS550/572/525
+ family of trackpad/touchscreen controllers.
+
+ To compile this driver as a module, choose M here: the
+ module will be called iqs5xx.
+
endif
@@ -108,3 +108,4 @@ obj-$(CONFIG_TOUCHSCREEN_ZET6223) += zet6223.o
obj-$(CONFIG_TOUCHSCREEN_ZFORCE) += zforce_ts.o
obj-$(CONFIG_TOUCHSCREEN_COLIBRI_VF50) += colibri-vf50-ts.o
obj-$(CONFIG_TOUCHSCREEN_ROHM_BU21023) += rohm_bu21023.o
+obj-$(CONFIG_TOUCHSCREEN_IQS5XX) += iqs5xx.o
new file mode 100644
@@ -0,0 +1,1079 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Azoteq IQS550/572/525 Trackpad/Touchscreen Controller
+ *
+ * Copyright (C) 2018
+ * Author: Jeff LaBundy <jeff@labundy.com>
+ *
+ * Note: these devices require firmware exported from a PC-based configuration
+ * tool made available by the manufacturer. The driver expects the firmware to
+ * be named according to the device (e.g. iqs550.hex for IQS550).
+ *
+ * Link to PC-based configuration tool and data sheet: http://www.azoteq.com/
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/firmware.h>
+#include <linux/gpio/consumer.h>
+#include <linux/i2c.h>
+#include <linux/input.h>
+#include <linux/input/mt.h>
+#include <linux/input/touchscreen.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/property.h>
+#include <linux/slab.h>
+#include <asm/unaligned.h>
+
+#define IQS5XX_NUM_RETRIES 10
+#define IQS5XX_NUM_POINTS 256
+#define IQS5XX_NUM_CONTACTS 5
+#define IQS5XX_VER_INFO_LEN 5
+#define IQS5XX_TOUCH_INFO_LEN (7 * IQS5XX_NUM_CONTACTS)
+
+#define IQS5XX_PROD_NUM 0x0000
+#define IQS5XX_PROD_NUM_IQS550 40
+#define IQS5XX_PROD_NUM_IQS572 58
+#define IQS5XX_PROD_NUM_IQS525 52
+
+#define IQS5XX_PROJ_NUM 0x0002
+#define IQS5XX_PROJ_NUM_A000 0
+#define IQS5XX_PROJ_NUM_B000 15
+
+#define IQS5XX_MAJOR_VER 0x0004
+#define IQS5XX_MAJOR_VER_SPEC 2
+
+#define IQS5XX_ABS_X 0x0016
+
+#define IQS5XX_SYS_CTRL1 0x0432
+#define IQS5XX_RESUME 0x00
+#define IQS5XX_SUSPEND 0x01
+
+#define IQS5XX_SYS_CFG0 0x058E
+#define IQS5XX_SW_INPUT_EVENT 0x10
+#define IQS5XX_SETUP_COMPLETE 0x40
+
+#define IQS5XX_SYS_CFG1 0x058F
+#define IQS5XX_EVENT_MODE 0x01
+#define IQS5XX_TP_EVENT 0x04
+
+#define IQS5XX_TOTAL_RX 0x063D
+#define IQS5XX_TOTAL_TX 0x063E
+
+#define IQS5XX_XY_CFG0 0x0669
+#define IQS5XX_FLIP_X 0x01
+#define IQS5XX_FLIP_Y 0x02
+#define IQS5XX_SWITCH_XY_AXIS 0x04
+
+#define IQS5XX_X_RES 0x066E
+#define IQS5XX_Y_RES 0x0670
+
+#define IQS5XX_EXP_VER 0x0677
+
+#define IQS5XX_CHKSM 0x83C0
+#define IQS5XX_APP 0x8400
+#define IQS5XX_CSTM 0xBE00
+#define IQS5XX_PMAP_END 0xBFFF
+
+#define IQS5XX_END_COMM 0xEEEE
+
+#define IQS5XX_CHKSM_LEN (IQS5XX_APP - IQS5XX_CHKSM)
+#define IQS5XX_APP_LEN (IQS5XX_CSTM - IQS5XX_APP)
+#define IQS5XX_CSTM_LEN (IQS5XX_PMAP_END + 1 - IQS5XX_CSTM)
+#define IQS5XX_PMAP_LEN (IQS5XX_PMAP_END + 1 - IQS5XX_CHKSM)
+
+#define IQS5XX_REC_SIZE_MAX 260
+#define IQS5XX_REC_FIELD_WIDTH 2
+#define IQS5XX_REC_LEN 0
+#define IQS5XX_REC_ADDRH 1
+#define IQS5XX_REC_ADDRL 2
+#define IQS5XX_REC_TYPE 3
+#define IQS5XX_REC_DATA 4
+#define IQS5XX_REC_ADDR_EOF 0xFFFF
+#define IQS5XX_REC_TYPE_DATA 0x00
+#define IQS5XX_REC_TYPE_EOF 0x01
+
+#define IQS5XX_BL_ADDR_MASK 0x40
+#define IQS5XX_BL_CMD_VER 0x00
+#define IQS5XX_BL_CMD_READ 0x01
+#define IQS5XX_BL_CMD_EXEC 0x02
+#define IQS5XX_BL_CMD_CRC 0x03
+#define IQS5XX_BL_BLK_LEN_MAX 64
+#define IQS5XX_BL_ID 0x0200
+#define IQS5XX_BL_CRC_PASS 0x00
+#define IQS5XX_BL_CRC_FAIL 0x01
+
+struct iqs5xx_private {
+ struct i2c_client *client;
+ struct input_dev *input;
+ struct gpio_desc *reset_gpio;
+ u16 exp_ver_spec;
+ u8 touch_info[IQS5XX_TOUCH_INFO_LEN];
+ bool disabled;
+};
+
+static const char * const iqs5xx_fw_names[] = {
+ "iqs550.hex",
+ "iqs572.hex",
+ "iqs525.hex",
+};
+
+static int iqs5xx_read_bytes(struct i2c_client *client,
+ u16 reg, u8 *val8, u16 len)
+{
+ __be16 reg_buf = cpu_to_be16(reg);
+ int ret, i;
+ struct i2c_msg msg[] = {
+ {
+ .addr = client->addr,
+ .flags = 0,
+ .len = sizeof(reg_buf),
+ .buf = (u8 *)®_buf,
+ },
+ {
+ .addr = client->addr,
+ .flags = I2C_M_RD,
+ .len = len,
+ .buf = val8,
+ },
+ };
+
+ /*
+ * The first addressing attempt outside of a communication window fails
+ * and must be retried, after which the device clock stretches until it
+ * is available.
+ */
+ for (i = 0; i < IQS5XX_NUM_RETRIES; i++) {
+ ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+ if (ret == ARRAY_SIZE(msg))
+ return 0;
+
+ usleep_range(200, 300);
+ }
+
+ if (ret >= 0)
+ ret = -EIO;
+
+ dev_err(&client->dev, "Failed to read from address %04X: %d\n",
+ reg, ret);
+
+ return ret;
+}
+
+static int iqs5xx_read_word(struct i2c_client *client, u16 reg, u16 *val)
+{
+ u8 val8[sizeof(*val)];
+ int ret;
+
+ ret = iqs5xx_read_bytes(client, reg, val8, sizeof(*val));
+ if (ret)
+ return ret;
+
+ *val = get_unaligned_be16(val8);
+
+ return 0;
+}
+
+static int iqs5xx_write_bytes(struct i2c_client *client,
+ u16 reg, u8 *val8, u16 len)
+{
+ int ret, i;
+ int mlen = sizeof(reg) + len;
+ u8 *mbuf = kzalloc(mlen, GFP_KERNEL);
+
+ if (!mbuf)
+ return -ENOMEM;
+
+ put_unaligned_be16(reg, mbuf);
+ memcpy(mbuf + sizeof(reg), val8, len);
+
+ /*
+ * The first addressing attempt outside of a communication window fails
+ * and must be retried, after which the device clock stretches until it
+ * is available.
+ */
+ for (i = 0; i < IQS5XX_NUM_RETRIES; i++) {
+ ret = i2c_master_send(client, (char *)mbuf, mlen);
+ if (ret == mlen) {
+ ret = 0;
+ goto msg_sent;
+ }
+
+ usleep_range(200, 300);
+ }
+
+ if (ret >= 0)
+ ret = -EIO;
+
+ dev_err(&client->dev, "Failed to write to address %04X: %d\n",
+ reg, ret);
+
+msg_sent:
+ kfree(mbuf);
+
+ return ret;
+}
+
+static int iqs5xx_write_word(struct i2c_client *client, u16 reg, u16 val)
+{
+ u8 val8[sizeof(val)];
+
+ put_unaligned_be16(val, val8);
+
+ return iqs5xx_write_bytes(client, reg, val8, sizeof(val));
+}
+
+static void iqs5xx_reset(struct i2c_client *client)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+
+ gpiod_set_value_cansleep(iqs5xx->reset_gpio, 0);
+ usleep_range(200, 300);
+
+ gpiod_set_value_cansleep(iqs5xx->reset_gpio, 1);
+}
+
+static int iqs5xx_bl_cmd(struct i2c_client *client, u8 bl_cmd, u16 bl_addr)
+{
+ struct i2c_msg msg;
+ int ret;
+ u8 mbuf[sizeof(bl_cmd) + sizeof(bl_addr)];
+
+ *mbuf = bl_cmd;
+ put_unaligned_be16(bl_addr, mbuf + sizeof(bl_cmd));
+
+ msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK;
+ msg.flags = 0;
+ msg.len = sizeof(bl_cmd);
+ msg.buf = mbuf;
+
+ switch (bl_cmd) {
+ case IQS5XX_BL_CMD_VER:
+ case IQS5XX_BL_CMD_EXEC:
+ case IQS5XX_BL_CMD_CRC:
+ break;
+ case IQS5XX_BL_CMD_READ:
+ msg.len += sizeof(bl_addr);
+ break;
+ default:
+ dev_err(&client->dev,
+ "Unrecognized bootloader command: 0x%02X\n",
+ bl_cmd);
+ return -EINVAL;
+ }
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret < 1)
+ goto msg_fail;
+
+ switch (bl_cmd) {
+ case IQS5XX_BL_CMD_VER:
+ msg.len = sizeof(u16);
+ break;
+ case IQS5XX_BL_CMD_CRC:
+ msg.len = sizeof(u8);
+ /*
+ * This delay saves the bus controller the trouble of having to
+ * tolerate a relatively long clock-stretching period while the
+ * CRC is calculated.
+ */
+ msleep(50);
+ break;
+ default:
+ return 0;
+ }
+
+ msg.flags = I2C_M_RD;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret < 1)
+ goto msg_fail;
+
+ if (bl_cmd == IQS5XX_BL_CMD_VER
+ && get_unaligned_be16(mbuf) != IQS5XX_BL_ID) {
+ dev_err(&client->dev, "Unexpected bootloader ID: 0x%04X\n",
+ get_unaligned_be16(mbuf));
+ return -EINVAL;
+ }
+
+ if (bl_cmd == IQS5XX_BL_CMD_CRC && *mbuf != IQS5XX_BL_CRC_PASS) {
+ dev_err(&client->dev, "Bootloader CRC failed\n");
+ return -EIO;
+ }
+
+ return 0;
+
+msg_fail:
+ if (ret >= 0)
+ ret = -EIO;
+
+ if (bl_cmd != IQS5XX_BL_CMD_VER)
+ dev_err(&client->dev,
+ "Unsuccessful bootloader command 0x%02X: %d\n",
+ bl_cmd, ret);
+
+ return ret;
+}
+
+static int iqs5xx_bl_write_blk(struct i2c_client *client,
+ u16 bl_addr, u8 *bl_data)
+{
+ struct i2c_msg msg;
+ int ret;
+ int mlen = sizeof(bl_addr) + IQS5XX_BL_BLK_LEN_MAX;
+ u8 *mbuf = kzalloc(mlen, GFP_KERNEL);
+
+ if (!mbuf)
+ return -ENOMEM;
+
+ put_unaligned_be16(bl_addr, mbuf);
+ memcpy(mbuf + sizeof(bl_addr), bl_data, IQS5XX_BL_BLK_LEN_MAX);
+
+ msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK;
+ msg.flags = 0;
+ msg.len = mlen;
+ msg.buf = mbuf;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret == 1) {
+ ret = 0;
+ goto msg_sent;
+ }
+
+ if (ret >= 0)
+ ret = -EIO;
+
+ dev_err(&client->dev, "Failed to write block at address %04X: %d\n",
+ bl_addr, ret);
+
+msg_sent:
+ kfree(mbuf);
+
+ return ret;
+}
+
+static int iqs5xx_bl_read_blk(struct i2c_client *client, u8 *bl_data)
+{
+ struct i2c_msg msg;
+ int ret;
+
+ msg.addr = client->addr ^ IQS5XX_BL_ADDR_MASK;
+ msg.flags = I2C_M_RD;
+ msg.len = IQS5XX_BL_BLK_LEN_MAX;
+ msg.buf = bl_data;
+
+ ret = i2c_transfer(client->adapter, &msg, 1);
+ if (ret == 1)
+ return 0;
+
+ if (ret >= 0)
+ ret = -EIO;
+
+ dev_err(&client->dev, "Failed to perform block read: %d\n", ret);
+
+ return ret;
+}
+
+static int iqs5xx_bl_verify(struct i2c_client *client, u16 bl_addr,
+ u8 *pmap_data, u16 pmap_len, bool *cmp)
+{
+ int ret, i;
+ u8 *bl_data = kzalloc(IQS5XX_BL_BLK_LEN_MAX, GFP_KERNEL);
+
+ if (!bl_data)
+ return -ENOMEM;
+
+ if (pmap_len % IQS5XX_BL_BLK_LEN_MAX) {
+ dev_err(&client->dev, "Invalid block length: %d\n", pmap_len);
+ ret = -EINVAL;
+ goto err_kfree;
+ }
+
+ for (i = 0; i < pmap_len; i += IQS5XX_BL_BLK_LEN_MAX) {
+ ret = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_READ, bl_addr + i);
+ if (ret)
+ goto err_kfree;
+
+ ret = iqs5xx_bl_read_blk(client, bl_data);
+ if (ret)
+ goto err_kfree;
+
+ if (memcmp(bl_data, pmap_data + i, IQS5XX_BL_BLK_LEN_MAX)) {
+ *cmp = true;
+ goto err_kfree;
+ }
+ }
+
+ *cmp = false;
+
+err_kfree:
+ kfree(bl_data);
+
+ return ret;
+}
+
+static u8 iqs5xx_rec_field(const u8 *rec_src)
+{
+ int i;
+ u8 rec_raw, rec_bin;
+ u8 rec_acc = 0;
+
+ for (i = 0; i < IQS5XX_REC_FIELD_WIDTH; i++) {
+ rec_raw = *(rec_src + i);
+
+ switch (rec_raw) {
+ case '0' ... '9':
+ rec_bin = rec_raw - '0';
+ break;
+ case 'a' ... 'f':
+ rec_bin = rec_raw - 'a' + 10;
+ break;
+ case 'A' ... 'F':
+ rec_bin = rec_raw - 'A' + 10;
+ break;
+ default:
+ rec_bin = 0;
+ }
+
+ rec_acc += rec_bin << (IQS5XX_REC_FIELD_WIDTH - i - 1) * 4;
+ }
+
+ return rec_acc;
+}
+
+static int iqs5xx_update_firmware(struct i2c_client *client, u8 fw_name_index)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+ const struct firmware *fw;
+ const char *fw_name;
+ bool cmp_cstm;
+ int ret, i, j;
+ u8 *pmap = kzalloc(IQS5XX_PMAP_LEN, GFP_KERNEL);
+ u8 rec[IQS5XX_REC_SIZE_MAX];
+ u8 rec_end, rec_chksm;
+ u8 val8;
+ u16 val;
+ u16 rec_addr = 0;
+ u32 pos = 0;
+
+ if (!pmap)
+ return -ENOMEM;
+
+ if (fw_name_index > ARRAY_SIZE(iqs5xx_fw_names)) {
+ ret = -EINVAL;
+ goto err_kfree;
+ }
+
+ fw_name = iqs5xx_fw_names[fw_name_index];
+ dev_info(&client->dev, "Updating device from firmware %s...\n",
+ fw_name);
+
+ ret = request_firmware(&fw, fw_name, &client->dev);
+ if (ret) {
+ dev_err(&client->dev, "Failed to request firmware %s: %d\n",
+ fw_name, ret);
+ goto err_kfree;
+ }
+
+ while (pos < fw->size) {
+ if (rec_addr == IQS5XX_REC_ADDR_EOF) {
+ dev_err(&client->dev, "Unexpected record past EOF\n");
+ ret = -EINVAL;
+ goto err_rls_fw;
+ }
+
+ if (fw->data[pos++] != ':') {
+ dev_err(&client->dev, "Invalid record placement\n");
+ ret = -EINVAL;
+ goto err_rls_fw;
+ }
+
+ rec[IQS5XX_REC_LEN] = iqs5xx_rec_field(fw->data + pos);
+ pos += IQS5XX_REC_FIELD_WIDTH;
+
+ rec_end = IQS5XX_REC_DATA + rec[IQS5XX_REC_LEN];
+ for (i = IQS5XX_REC_ADDRH; i <= rec_end; i++) {
+ rec[i] = iqs5xx_rec_field(fw->data + pos);
+ pos += IQS5XX_REC_FIELD_WIDTH;
+ }
+
+ rec_addr = get_unaligned_be16(rec + IQS5XX_REC_ADDRH);
+
+ rec_chksm = 0;
+ for (i = IQS5XX_REC_LEN; i < rec_end; i++)
+ rec_chksm += rec[i];
+ rec_chksm = ~rec_chksm + 1;
+
+ /*
+ * The checksum field for records corresponding to user-exported
+ * settings does not appear to be recalculated when the firmware
+ * is exported, so skip checksum verification for that region.
+ */
+ if (rec_chksm != rec[rec_end] && rec_addr < IQS5XX_CSTM) {
+ dev_err(&client->dev,
+ "Invalid record checksum: 0x%02X\n",
+ rec[rec_end]);
+ ret = -EINVAL;
+ goto err_rls_fw;
+ }
+
+ switch (rec[IQS5XX_REC_TYPE]) {
+ case IQS5XX_REC_TYPE_DATA:
+ if (rec_addr < IQS5XX_CHKSM
+ || rec_addr > IQS5XX_PMAP_END) {
+ dev_err(&client->dev,
+ "Invalid record address: 0x%04X\n",
+ rec_addr);
+ ret = -EINVAL;
+ goto err_rls_fw;
+ }
+ memcpy(pmap + rec_addr - IQS5XX_CHKSM,
+ rec + IQS5XX_REC_DATA,
+ rec[IQS5XX_REC_LEN]);
+ break;
+ case IQS5XX_REC_TYPE_EOF:
+ if (rec_addr != IQS5XX_REC_ADDR_EOF) {
+ dev_err(&client->dev,
+ "Unexpected record address: 0x%04X\n",
+ rec_addr);
+ ret = -EINVAL;
+ goto err_rls_fw;
+ }
+ break;
+ default:
+ dev_err(&client->dev,
+ "Unexpected record type: 0x%02X\n",
+ rec_addr);
+ ret = -EINVAL;
+ goto err_rls_fw;
+ }
+
+ pos += IQS5XX_REC_FIELD_WIDTH;
+ }
+
+ /*
+ * The device opens a bootloader polling window for 2 ms following the
+ * release of reset. If the host cannot establish communication during
+ * this time frame, it must cycle reset again.
+ */
+ for (i = 0; i < IQS5XX_NUM_RETRIES; i++) {
+ iqs5xx_reset(client);
+
+ for (j = 0; j < IQS5XX_NUM_RETRIES; j++) {
+ ret = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_VER, 0);
+ if (!ret)
+ break;
+ }
+
+ if (!ret)
+ break;
+ }
+
+ if (i == IQS5XX_NUM_RETRIES) {
+ dev_err(&client->dev, "Failed to enter bootloader: %d\n", ret);
+ goto err_rls_fw;
+ }
+
+ for (i = 0; i < IQS5XX_PMAP_LEN; i += IQS5XX_BL_BLK_LEN_MAX) {
+ ret = iqs5xx_bl_write_blk(client, IQS5XX_CHKSM + i, pmap + i);
+ if (ret)
+ goto err_rls_fw;
+
+ usleep_range(10000, 10100);
+ }
+
+ ret = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_CRC, 0);
+ if (ret)
+ goto err_rls_fw;
+
+ ret = iqs5xx_bl_verify(client, IQS5XX_CSTM,
+ pmap + IQS5XX_CHKSM_LEN + IQS5XX_APP_LEN,
+ IQS5XX_CSTM_LEN, &cmp_cstm);
+ if (ret)
+ goto err_rls_fw;
+
+ if (cmp_cstm) {
+ dev_err(&client->dev, "Failed to verify custom settings\n");
+ ret = -EIO;
+ goto err_rls_fw;
+ }
+
+ ret = iqs5xx_bl_cmd(client, IQS5XX_BL_CMD_EXEC, 0);
+ if (ret)
+ goto err_rls_fw;
+
+ usleep_range(10000, 10100);
+
+ ret = iqs5xx_read_word(client, IQS5XX_PROJ_NUM, &val);
+ if (ret)
+ goto err_rls_fw;
+
+ if (val != IQS5XX_PROJ_NUM_B000) {
+ dev_err(&client->dev, "Unexpected project number: %d\n", val);
+ ret = -ENODEV;
+ goto err_rls_fw;
+ }
+
+ ret = iqs5xx_read_bytes(client, IQS5XX_MAJOR_VER, &val8, sizeof(val8));
+ if (ret)
+ goto err_rls_fw;
+
+ if (val8 != IQS5XX_MAJOR_VER_SPEC) {
+ dev_err(&client->dev, "Unexpected major version: %d\n", val8);
+ ret = -ENODEV;
+ goto err_rls_fw;
+ }
+
+ if (iqs5xx->exp_ver_spec) {
+ ret = iqs5xx_read_word(client, IQS5XX_EXP_VER, &val);
+ if (ret)
+ goto err_rls_fw;
+
+ if (val != iqs5xx->exp_ver_spec) {
+ dev_err(&client->dev,
+ "Unexpected export version: %d.%d\n",
+ (val & 0xFF00) >> 8, val & 0x00FF);
+ ret = -ENODEV;
+ }
+ }
+
+err_rls_fw:
+ release_firmware(fw);
+
+err_kfree:
+ kfree(pmap);
+
+ return ret;
+}
+
+static int iqs5xx_dev_id(struct i2c_client *client)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+ int ret;
+ u16 val;
+ u8 ver_info[IQS5XX_VER_INFO_LEN];
+ u8 exp_ver_major = 0;
+ u8 exp_ver_minor = 0;
+ u8 fw_name_index;
+
+ device_property_read_u8(&client->dev,
+ "azoteq,exp-ver-major", &exp_ver_major);
+ device_property_read_u8(&client->dev,
+ "azoteq,exp-ver-minor", &exp_ver_minor);
+ iqs5xx->exp_ver_spec = (exp_ver_major << 8) | exp_ver_minor;
+
+ iqs5xx_reset(client);
+ usleep_range(10000, 10100);
+
+ ret = iqs5xx_read_bytes(client,
+ IQS5XX_PROD_NUM, ver_info, IQS5XX_VER_INFO_LEN);
+ if (ret)
+ return ret;
+
+ /*
+ * A000 and B000 devices use 8-bit and 16-bit addressing, respectively.
+ * Querying an A000 device's version information with 16-bit addressing
+ * gives the appearance that the data is shifted by one byte; a nonzero
+ * leading array element suggests this could be the case.
+ */
+ if (*ver_info) {
+ memmove(ver_info + sizeof(u8), ver_info,
+ IQS5XX_VER_INFO_LEN - sizeof(u8));
+ *ver_info = 0;
+ }
+
+ val = get_unaligned_be16(ver_info + IQS5XX_PROD_NUM);
+ switch (val) {
+ case IQS5XX_PROD_NUM_IQS550:
+ fw_name_index = 0;
+ break;
+ case IQS5XX_PROD_NUM_IQS572:
+ fw_name_index = 1;
+ break;
+ case IQS5XX_PROD_NUM_IQS525:
+ fw_name_index = 2;
+ break;
+ default:
+ dev_err(&client->dev, "Unrecognized product number: %d\n", val);
+ return -ENODEV;
+ }
+
+ val = get_unaligned_be16(ver_info + IQS5XX_PROJ_NUM);
+ switch (val) {
+ case IQS5XX_PROJ_NUM_A000:
+ dev_info(&client->dev, "Unexpected project number: %d\n", val);
+ return iqs5xx_update_firmware(client, fw_name_index);
+ case IQS5XX_PROJ_NUM_B000:
+ break;
+ default:
+ dev_err(&client->dev, "Unrecognized project number: %d\n", val);
+ return -ENODEV;
+ }
+
+ val = *(ver_info + IQS5XX_MAJOR_VER);
+ if (val != IQS5XX_MAJOR_VER_SPEC) {
+ dev_info(&client->dev, "Unexpected major version: %d\n", val);
+ return iqs5xx_update_firmware(client, fw_name_index);
+ }
+
+ if (iqs5xx->exp_ver_spec) {
+ ret = iqs5xx_read_word(client, IQS5XX_EXP_VER, &val);
+ if (ret)
+ return ret;
+
+ if (val != iqs5xx->exp_ver_spec) {
+ dev_info(&client->dev,
+ "Unexpected export version: %d.%d\n",
+ (val & 0xFF00) >> 8, val & 0x00FF);
+ return iqs5xx_update_firmware(client, fw_name_index);
+ }
+ }
+
+ return 0;
+}
+
+static int iqs5xx_dev_init(struct i2c_client *client)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+ struct touchscreen_properties prop;
+ int ret;
+ u16 max_x, max_x_hw;
+ u16 max_y, max_y_hw;
+ u8 val8;
+
+ ret = iqs5xx_read_bytes(client, IQS5XX_TOTAL_RX, &val8, sizeof(val8));
+ if (ret)
+ return ret;
+ max_x_hw = (val8 - 1) * IQS5XX_NUM_POINTS;
+
+ ret = iqs5xx_read_bytes(client, IQS5XX_TOTAL_TX, &val8, sizeof(val8));
+ if (ret)
+ return ret;
+ max_y_hw = (val8 - 1) * IQS5XX_NUM_POINTS;
+
+ ret = iqs5xx_read_bytes(client, IQS5XX_XY_CFG0, &val8, sizeof(val8));
+ if (ret)
+ return ret;
+
+ if (val8 & IQS5XX_SWITCH_XY_AXIS)
+ swap(max_x_hw, max_y_hw);
+
+ touchscreen_parse_properties(iqs5xx->input, true, &prop);
+
+ if (prop.swap_x_y)
+ val8 ^= IQS5XX_SWITCH_XY_AXIS;
+
+ if (prop.invert_x)
+ val8 ^= prop.swap_x_y ? IQS5XX_FLIP_Y : IQS5XX_FLIP_X;
+
+ if (prop.invert_y)
+ val8 ^= prop.swap_x_y ? IQS5XX_FLIP_X : IQS5XX_FLIP_Y;
+
+ ret = iqs5xx_write_bytes(client, IQS5XX_XY_CFG0, &val8, sizeof(val8));
+ if (ret)
+ return ret;
+
+ if (prop.max_x > max_x_hw) {
+ dev_err(&client->dev, "Invalid maximum x-coordinate: %d > %d\n",
+ prop.max_x, max_x_hw);
+ return -EINVAL;
+ } else if (prop.max_x == 0) {
+ ret = iqs5xx_read_word(client, IQS5XX_X_RES, &max_x);
+ if (ret)
+ return ret;
+
+ input_abs_set_max(iqs5xx->input, prop.swap_x_y ?
+ ABS_MT_POSITION_Y : ABS_MT_POSITION_X, max_x);
+ } else {
+ max_x = (u16)prop.max_x;
+ }
+
+ if (prop.max_y > max_y_hw) {
+ dev_err(&client->dev, "Invalid maximum y-coordinate: %d > %d\n",
+ prop.max_y, max_y_hw);
+ return -EINVAL;
+ } else if (prop.max_y == 0) {
+ ret = iqs5xx_read_word(client, IQS5XX_Y_RES, &max_y);
+ if (ret)
+ return ret;
+
+ input_abs_set_max(iqs5xx->input, prop.swap_x_y ?
+ ABS_MT_POSITION_X : ABS_MT_POSITION_Y, max_y);
+ } else {
+ max_y = (u16)prop.max_y;
+ }
+
+ /*
+ * Write horizontal and vertical resolution to the device in case its
+ * original defaults were overridden or swapped as per the properties
+ * specified in the device tree.
+ */
+ ret = iqs5xx_write_word(client,
+ prop.swap_x_y ? IQS5XX_Y_RES : IQS5XX_X_RES, max_x);
+ if (ret)
+ return ret;
+
+ ret = iqs5xx_write_word(client,
+ prop.swap_x_y ? IQS5XX_X_RES : IQS5XX_Y_RES, max_y);
+ if (ret)
+ return ret;
+
+ ret = iqs5xx_read_bytes(client, IQS5XX_SYS_CFG0, &val8, sizeof(val8));
+ if (ret)
+ return ret;
+
+ val8 |= IQS5XX_SETUP_COMPLETE;
+ val8 &= ~IQS5XX_SW_INPUT_EVENT;
+ ret = iqs5xx_write_bytes(client, IQS5XX_SYS_CFG0, &val8, sizeof(val8));
+ if (ret)
+ return ret;
+
+ val8 = IQS5XX_TP_EVENT | IQS5XX_EVENT_MODE;
+ ret = iqs5xx_write_bytes(client, IQS5XX_SYS_CFG1, &val8, sizeof(val8));
+ if (ret)
+ return ret;
+
+ ret = iqs5xx_write_bytes(client, IQS5XX_END_COMM, &val8, sizeof(val8));
+ if (ret)
+ return ret;
+
+ /*
+ * The return from this function is delayed so as to avoid a relatively
+ * long clock-stretching period that occurs during open and close call-
+ * backs made when the input device is subsequently registered.
+ */
+ msleep(100);
+
+ return 0;
+}
+
+static irqreturn_t iqs5xx_irq(int irq, void *data)
+{
+ struct iqs5xx_private *iqs5xx = (struct iqs5xx_private *)data;
+ struct i2c_client *client = iqs5xx->client;
+ struct input_dev *input = iqs5xx->input;
+ int ret, i;
+ u16 abs_x, abs_y, pressure;
+ u8 pos = 0;
+
+ ret = iqs5xx_read_bytes(client, IQS5XX_ABS_X,
+ iqs5xx->touch_info, IQS5XX_TOUCH_INFO_LEN);
+ if (ret)
+ return IRQ_NONE;
+
+ for (i = 0; i < IQS5XX_NUM_CONTACTS; i++) {
+ abs_x = get_unaligned_be16(iqs5xx->touch_info + pos);
+ pos += sizeof(abs_x);
+
+ abs_y = get_unaligned_be16(iqs5xx->touch_info + pos);
+ pos += sizeof(abs_y);
+
+ pressure = get_unaligned_be16(iqs5xx->touch_info + pos);
+ pos += (sizeof(pressure) + sizeof(u8));
+
+ input_mt_slot(input, i);
+ input_mt_report_slot_state(input, MT_TOOL_FINGER, pressure > 0);
+
+ if (pressure > 0) {
+ input_report_abs(input, ABS_MT_POSITION_X, abs_x);
+ input_report_abs(input, ABS_MT_POSITION_Y, abs_y);
+ input_report_abs(input, ABS_MT_PRESSURE, pressure);
+ }
+ }
+
+ input_mt_sync_frame(input);
+ input_sync(input);
+
+ ret = iqs5xx_write_bytes(client, IQS5XX_END_COMM, &pos, sizeof(pos));
+ if (ret)
+ return IRQ_NONE;
+
+ return IRQ_HANDLED;
+}
+
+static int iqs5xx_set_state(struct i2c_client *client, u8 state)
+{
+ struct iqs5xx_private *iqs5xx = i2c_get_clientdata(client);
+ int ret;
+
+ if ((iqs5xx->disabled && state == IQS5XX_SUSPEND)
+ || (!iqs5xx->disabled && state == IQS5XX_RESUME))
+ return 0;
+
+ /*
+ * Addressing the device outside of a communication window prompts it
+ * to assert the RDY output, so disable the interrupt line to prevent
+ * the handler from servicing a false interrupt.
+ */
+ disable_irq(client->irq);
+
+ ret = iqs5xx_write_bytes(client,
+ IQS5XX_SYS_CTRL1, &state, sizeof(state));
+ if (ret)
+ return ret;
+
+ ret = iqs5xx_write_bytes(client,
+ IQS5XX_END_COMM, &state, sizeof(state));
+ if (ret)
+ return ret;
+
+ enable_irq(client->irq);
+
+ iqs5xx->disabled = (state == IQS5XX_SUSPEND);
+
+ return 0;
+}
+
+static int iqs5xx_open(struct input_dev *input)
+{
+ struct iqs5xx_private *iqs5xx = input_get_drvdata(input);
+
+ return iqs5xx_set_state(iqs5xx->client, IQS5XX_RESUME);
+}
+
+static void iqs5xx_close(struct input_dev *input)
+{
+ struct iqs5xx_private *iqs5xx = input_get_drvdata(input);
+
+ iqs5xx_set_state(iqs5xx->client, IQS5XX_SUSPEND);
+}
+
+static int __maybe_unused iqs5xx_suspend(struct device *dev)
+{
+ struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
+ int ret = 0;
+
+ mutex_lock(&iqs5xx->input->mutex);
+
+ if (iqs5xx->input->users)
+ ret = iqs5xx_set_state(iqs5xx->client, IQS5XX_SUSPEND);
+
+ mutex_unlock(&iqs5xx->input->mutex);
+
+ return ret;
+}
+
+static int __maybe_unused iqs5xx_resume(struct device *dev)
+{
+ struct iqs5xx_private *iqs5xx = dev_get_drvdata(dev);
+ int ret = 0;
+
+ mutex_lock(&iqs5xx->input->mutex);
+
+ if (iqs5xx->input->users)
+ ret = iqs5xx_set_state(iqs5xx->client, IQS5XX_RESUME);
+
+ mutex_unlock(&iqs5xx->input->mutex);
+
+ return ret;
+}
+
+static SIMPLE_DEV_PM_OPS(iqs5xx_pm, iqs5xx_suspend, iqs5xx_resume);
+
+static int iqs5xx_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct iqs5xx_private *iqs5xx;
+ struct input_dev *input;
+ int ret;
+
+ iqs5xx = devm_kzalloc(&client->dev,
+ sizeof(struct iqs5xx_private), GFP_KERNEL);
+ if (!iqs5xx)
+ return -ENOMEM;
+
+ dev_set_drvdata(&client->dev, iqs5xx);
+
+ i2c_set_clientdata(client, iqs5xx);
+ iqs5xx->client = client;
+
+ iqs5xx->reset_gpio = devm_gpiod_get(&client->dev,
+ "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(iqs5xx->reset_gpio)) {
+ ret = PTR_ERR(iqs5xx->reset_gpio);
+ dev_err(&client->dev, "Failed to request GPIO: %d\n", ret);
+ return ret;
+ }
+
+ ret = iqs5xx_dev_id(client);
+ if (ret)
+ return ret;
+
+ input = devm_input_allocate_device(&client->dev);
+ if (!input)
+ return -ENOMEM;
+
+ input_set_drvdata(input, iqs5xx);
+ iqs5xx->input = input;
+
+ input->name = client->name;
+ input->id.bustype = BUS_I2C;
+ input->open = iqs5xx_open;
+ input->close = iqs5xx_close;
+
+ input_set_capability(input, EV_ABS, ABS_MT_POSITION_X);
+ input_set_capability(input, EV_ABS, ABS_MT_POSITION_Y);
+ input_set_capability(input, EV_ABS, ABS_MT_PRESSURE);
+
+ ret = iqs5xx_dev_init(client);
+ if (ret)
+ return ret;
+
+ ret = input_mt_init_slots(input, IQS5XX_NUM_CONTACTS, INPUT_MT_DIRECT);
+ if (ret) {
+ dev_err(&client->dev, "Failed to initialize slots: %d\n", ret);
+ return ret;
+ }
+
+ ret = devm_request_threaded_irq(&client->dev, client->irq,
+ NULL, iqs5xx_irq,
+ IRQF_ONESHOT | IRQF_TRIGGER_RISING,
+ client->name, iqs5xx);
+ if (ret) {
+ dev_err(&client->dev, "Failed to request IRQ: %d\n", ret);
+ return ret;
+ }
+
+ ret = input_register_device(input);
+ if (ret) {
+ dev_err(&client->dev, "Failed to register device: %d\n", ret);
+ return ret;
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id iqs5xx_id[] = {
+ { "iqs550", 0 },
+ { "iqs572", 1 },
+ { "iqs525", 2 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, iqs5xx_id);
+
+static const struct of_device_id iqs5xx_of_match[] = {
+ { .compatible = "azoteq,iqs550" },
+ { .compatible = "azoteq,iqs572" },
+ { .compatible = "azoteq,iqs525" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, iqs5xx_of_match);
+
+static struct i2c_driver iqs5xx_i2c_driver = {
+ .driver = {
+ .name = "iqs5xx",
+ .of_match_table = iqs5xx_of_match,
+ .pm = &iqs5xx_pm,
+ },
+ .id_table = iqs5xx_id,
+ .probe = iqs5xx_probe,
+};
+module_i2c_driver(iqs5xx_i2c_driver);
+
+MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
+MODULE_DESCRIPTION("Azoteq IQS550/572/525 Trackpad/Touchscreen Controller");
+MODULE_LICENSE("GPL");
This patch adds support for the Azoteq IQS550/572/525 family of trackpad/touchscreen controllers. Signed-off-by: Jeff LaBundy <jeff@labundy.com> --- Changes in v2: - Rebased on top of updated iqs5xx.txt - Refactored the axis configuration logic in iqs5xx_dev_init to adhere to the behavior defined in touchscreen.txt drivers/input/touchscreen/Kconfig | 10 + drivers/input/touchscreen/Makefile | 1 + drivers/input/touchscreen/iqs5xx.c | 1079 ++++++++++++++++++++++++++++++++++++ 3 files changed, 1090 insertions(+) create mode 100644 drivers/input/touchscreen/iqs5xx.c -- 2.7.4