@@ -307,6 +307,9 @@ static void wacom_feature_mapping(struct hid_device *hdev,
wacom_hid_usage_quirk(hdev, field, usage);
switch (equivalent_usage) {
+ case WACOM_HID_WD_TOUCH_RING_SETTING:
+ wacom->generic_has_leds = true;
+ break;
case HID_DG_CONTACTMAX:
/* leave touch_max as is if predefined */
if (!features->touch_max) {
@@ -1930,8 +1930,6 @@ static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_BUTTONCENTER:
- wacom->generic_has_leds = true;
- /* fall through */
case WACOM_HID_WD_BUTTONHOME:
case WACOM_HID_WD_BUTTONUP:
case WACOM_HID_WD_BUTTONDOWN:
@@ -145,6 +145,7 @@
#define WACOM_HID_WD_OFFSETBOTTOM (WACOM_HID_UP_WACOMDIGITIZER | 0x0d33)
#define WACOM_HID_WD_DATAMODE (WACOM_HID_UP_WACOMDIGITIZER | 0x1002)
#define WACOM_HID_WD_DIGITIZERINFO (WACOM_HID_UP_WACOMDIGITIZER | 0x1013)
+#define WACOM_HID_WD_TOUCH_RING_SETTING (WACOM_HID_UP_WACOMDIGITIZER | 0x1032)
#define WACOM_HID_UP_G9 0xff090000
#define WACOM_HID_G9_PEN (WACOM_HID_UP_G9 | 0x02)
#define WACOM_HID_G9_TOUCHSCREEN (WACOM_HID_UP_G9 | 0x11)
Currently, the driver will attempt to set the mode on all devices with a center button, but some devices with a center button lack LEDs, and attempting to set the LEDs on devices without LEDs results in the kernel error message of the form: "leds input8::wacom-0.1: Setting an LED's brightness failed (-32)" This is because the generic codepath erroneously assumes that the BUTTON_CENTER usage indicates that the device has LEDs, the previously ignored TOUCH_RING_SETTING usage is a more accurate indication of the existence of LEDs on the device. Fixes: 10c55cacb8b2 ("HID: wacom: generic: support LEDs") Cc: <stable@vger.kernel.org> # v4.11+ Signed-off-by: Aaron Armstrong Skomra <aaron.skomra@wacom.com> Reviewed-by: Jason Gerecke <jason.gerecke@wacom.com> --- drivers/hid/wacom_sys.c | 3 +++ drivers/hid/wacom_wac.c | 2 -- drivers/hid/wacom_wac.h | 1 + 3 files changed, 4 insertions(+), 2 deletions(-)