diff mbox

[1/4] HID: hid-lg4ff: Minor code cleanup to improve readability

Message ID 1821076.VxISZdqPyn@qosmio-x300 (mailing list archive)
State New, archived
Delegated to: Jiri Kosina
Headers show

Commit Message

Michal Malý Sept. 23, 2012, 11:09 p.m. UTC 
This patch replaces all occurrences of "report->field[0]->value[n]" with just "value[n]" to get rid of the lengthy trains we have now.

Signed-off-by: Michal Malý <madcatxster@gmail.com>
---
From bad52be1762f00ed4dbe7c5a21cbfe9d9d0f4428 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Michal=20Mal=C3=BD?= <madcatxster@gmail.com>
Date: Wed, 27 Jun 2012 12:09:33 +0200
Subject: [PATCH 1/4] Replace "report->field[0]->value[n]" with "value[n]" for
 better code readability.

---
 drivers/hid/hid-lg4ff.c | 121 +++++++++++++++++++++++++-----------------------
 1 file changed, 64 insertions(+), 57 deletions(-)

Comments

Jiri Kosina Sept. 25, 2012, 1:45 p.m. UTC | #1 
On Mon, 24 Sep 2012, Michal Malý wrote:

> This patch replaces all occurrences of "report->field[0]->value[n]" with just "value[n]" to get rid of the lengthy trains we have now.
> 
> Signed-off-by: Michal Malý <madcatxster@gmail.com>
> ---
> >From bad52be1762f00ed4dbe7c5a21cbfe9d9d0f4428 Mon Sep 17 00:00:00 2001
> From: =?UTF-8?q?Michal=20Mal=C3=BD?= <madcatxster@gmail.com>
> Date: Wed, 27 Jun 2012 12:09:33 +0200
> Subject: [PATCH 1/4] Replace "report->field[0]->value[n]" with "value[n]" for
>  better code readability.
> 
> ---
>  drivers/hid/hid-lg4ff.c | 121 +++++++++++++++++++++++++-----------------------
>  1 file changed, 64 insertions(+), 57 deletions(-)

Michal,

thanks for the patches. I am applying the series, but please note the 
following comments:

- please submit your patches in a way that they can be properly applied by 
  'git-am'. The way you are sending those will cause the changelog to be 
  lost, as git-am would pick up only the part that was generated by 
  git-format-patch, which is after your changelog
- 4/4 has been line-wrapped. I have fixed that up by hand.

Thanks,
diff mbox

Patch

diff --git a/drivers/hid/hid-lg4ff.c b/drivers/hid/hid-lg4ff.c
index f3390ee..c40e957 100644
--- a/drivers/hid/hid-lg4ff.c
+++ b/drivers/hid/hid-lg4ff.c
@@ -134,6 +134,7 @@  static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *e
 	struct hid_device *hid = input_get_drvdata(dev);
 	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
 	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+	__s32 *value = report->field[0]->value;
 	int x;
 
 #define CLAMP(x) if (x < 0) x = 0; if (x > 0xff) x = 0xff
@@ -142,13 +143,13 @@  static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *e
 	case FF_CONSTANT:
 		x = effect->u.ramp.start_level + 0x80;	/* 0x80 is no force */
 		CLAMP(x);
-		report->field[0]->value[0] = 0x11;	/* Slot 1 */
-		report->field[0]->value[1] = 0x08;
-		report->field[0]->value[2] = x;
-		report->field[0]->value[3] = 0x80;
-		report->field[0]->value[4] = 0x00;
-		report->field[0]->value[5] = 0x00;
-		report->field[0]->value[6] = 0x00;
+		value[0] = 0x11;	/* Slot 1 */
+		value[1] = 0x08;
+		value[2] = x;
+		value[3] = 0x80;
+		value[4] = 0x00;
+		value[5] = 0x00;
+		value[6] = 0x00;
 
 		usbhid_submit_report(hid, report, USB_DIR_OUT);
 		break;
@@ -163,14 +164,15 @@  static void hid_lg4ff_set_autocenter_default(struct input_dev *dev, u16 magnitud
 	struct hid_device *hid = input_get_drvdata(dev);
 	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
 	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+	__s32 *value = report->field[0]->value;
 
-	report->field[0]->value[0] = 0xfe;
-	report->field[0]->value[1] = 0x0d;
-	report->field[0]->value[2] = magnitude >> 13;
-	report->field[0]->value[3] = magnitude >> 13;
-	report->field[0]->value[4] = magnitude >> 8;
-	report->field[0]->value[5] = 0x00;
-	report->field[0]->value[6] = 0x00;
+	value[0] = 0xfe;
+	value[1] = 0x0d;
+	value[2] = magnitude >> 13;
+	value[3] = magnitude >> 13;
+	value[4] = magnitude >> 8;
+	value[5] = 0x00;
+	value[6] = 0x00;
 
 	usbhid_submit_report(hid, report, USB_DIR_OUT);
 }
@@ -181,16 +183,16 @@  static void hid_lg4ff_set_autocenter_ffex(struct input_dev *dev, u16 magnitude)
 	struct hid_device *hid = input_get_drvdata(dev);
 	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
 	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+	__s32 *value = report->field[0]->value;
 	magnitude = magnitude * 90 / 65535;
-	
 
-	report->field[0]->value[0] = 0xfe;
-	report->field[0]->value[1] = 0x03;
-	report->field[0]->value[2] = magnitude >> 14;
-	report->field[0]->value[3] = magnitude >> 14;
-	report->field[0]->value[4] = magnitude;
-	report->field[0]->value[5] = 0x00;
-	report->field[0]->value[6] = 0x00;
+	value[0] = 0xfe;
+	value[1] = 0x03;
+	value[2] = magnitude >> 14;
+	value[3] = magnitude >> 14;
+	value[4] = magnitude;
+	value[5] = 0x00;
+	value[6] = 0x00;
 
 	usbhid_submit_report(hid, report, USB_DIR_OUT);
 }
@@ -200,15 +202,17 @@  static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range)
 {
 	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
 	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
+	__s32 *value = report->field[0]->value;
+
 	dbg_hid("G25/G27/DFGT: setting range to %u\n", range);
 
-	report->field[0]->value[0] = 0xf8;
-	report->field[0]->value[1] = 0x81;
-	report->field[0]->value[2] = range & 0x00ff;
-	report->field[0]->value[3] = (range & 0xff00) >> 8;
-	report->field[0]->value[4] = 0x00;
-	report->field[0]->value[5] = 0x00;
-	report->field[0]->value[6] = 0x00;
+	value[0] = 0xf8;
+	value[1] = 0x81;
+	value[2] = range & 0x00ff;
+	value[3] = (range & 0xff00) >> 8;
+	value[4] = 0x00;
+	value[5] = 0x00;
+	value[6] = 0x00;
 
 	usbhid_submit_report(hid, report, USB_DIR_OUT);
 }
@@ -219,16 +223,18 @@  static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range)
 	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
 	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
 	int start_left, start_right, full_range;
+	__s32 *value = report->field[0]->value;
+
 	dbg_hid("Driving Force Pro: setting range to %u\n", range);
 
 	/* Prepare "coarse" limit command */
-	report->field[0]->value[0] = 0xf8;
-	report->field[0]->value[1] = 0x00; 	/* Set later */
-	report->field[0]->value[2] = 0x00;
-	report->field[0]->value[3] = 0x00;
-	report->field[0]->value[4] = 0x00;
-	report->field[0]->value[5] = 0x00;
-	report->field[0]->value[6] = 0x00;
+	value[0] = 0xf8;
+	value[1] = 0x00; 	/* Set later */
+	value[2] = 0x00;
+	value[3] = 0x00;
+	value[4] = 0x00;
+	value[5] = 0x00;
+	value[6] = 0x00;
 
 	if (range > 200) {
 		report->field[0]->value[1] = 0x03;
@@ -240,13 +246,13 @@  static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range)
 	usbhid_submit_report(hid, report, USB_DIR_OUT);
 
 	/* Prepare "fine" limit command */
-	report->field[0]->value[0] = 0x81;
-	report->field[0]->value[1] = 0x0b;
-	report->field[0]->value[2] = 0x00;
-	report->field[0]->value[3] = 0x00;
-	report->field[0]->value[4] = 0x00;
-	report->field[0]->value[5] = 0x00;
-	report->field[0]->value[6] = 0x00;
+	value[0] = 0x81;
+	value[1] = 0x0b;
+	value[2] = 0x00;
+	value[3] = 0x00;
+	value[4] = 0x00;
+	value[5] = 0x00;
+	value[6] = 0x00;
 
 	if (range == 200 || range == 900) {	/* Do not apply any fine limit */
 		usbhid_submit_report(hid, report, USB_DIR_OUT);
@@ -257,11 +263,11 @@  static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range)
 	start_left = (((full_range - range + 1) * 2047) / full_range);
 	start_right = 0xfff - start_left;
 
-	report->field[0]->value[2] = start_left >> 4;
-	report->field[0]->value[3] = start_right >> 4;
-	report->field[0]->value[4] = 0xff;
-	report->field[0]->value[5] = (start_right & 0xe) << 4 | (start_left & 0xe);
-	report->field[0]->value[6] = 0xff;
+	value[2] = start_left >> 4;
+	value[3] = start_right >> 4;
+	value[4] = 0xff;
+	value[5] = (start_right & 0xe) << 4 | (start_left & 0xe);
+	value[6] = 0xff;
 
 	usbhid_submit_report(hid, report, USB_DIR_OUT);
 }
@@ -344,14 +350,15 @@  static void lg4ff_set_leds(struct hid_device *hid, __u8 leds)
 {
 	struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
 	struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
-
-	report->field[0]->value[0] = 0xf8;
-	report->field[0]->value[1] = 0x12;
-	report->field[0]->value[2] = leds;
-	report->field[0]->value[3] = 0x00;
-	report->field[0]->value[4] = 0x00;
-	report->field[0]->value[5] = 0x00;
-	report->field[0]->value[6] = 0x00;
+	__s32 *value = report->field[0]->value;
+
+	value[0] = 0xf8;
+	value[1] = 0x12;
+	value[2] = leds;
+	value[3] = 0x00;
+	value[4] = 0x00;
+	value[5] = 0x00;
+	value[6] = 0x00;
 	usbhid_submit_report(hid, report, USB_DIR_OUT);
 }
 
@@ -501,7 +508,7 @@  int lg4ff_init(struct hid_device *hid)
 	/* Check if autocentering is available and
 	 * set the centering force to zero by default */
 	if (test_bit(FF_AUTOCENTER, dev->ffbit)) {
-		if(rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN)	/* Formula Force EX expects different autocentering command */
+		if (rev_maj == FFEX_REV_MAJ && rev_min == FFEX_REV_MIN)	/* Formula Force EX expects different autocentering command */
 			dev->ff->set_autocenter = hid_lg4ff_set_autocenter_ffex;
 		else
 			dev->ff->set_autocenter = hid_lg4ff_set_autocenter_default;