@@ -436,6 +436,18 @@ config TOUCHSCREEN_TOUCHWIN
To compile this driver as a module, choose M here: the
module will be called touchwin.
+config TOUCHSCREEN_TI_TSCADC
+ tristate "TI Touchscreen Interface"
+ depends on HAVE_CLK
+ help
+ Say Y here if you have 4/5/8 wire touchscreen controller
+ to be connected to the ADC controller on your TI SoC.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ti_tscadc.
+
config TOUCHSCREEN_ATMEL_TSADCC
tristate "Atmel Touchscreen Interface"
depends on ARCH_AT91SAM9RL || ARCH_AT91SAM9G45
@@ -46,6 +46,7 @@ obj-$(CONFIG_TOUCHSCREEN_PIXCIR) += pixcir_i2c_ts.o
obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
obj-$(CONFIG_TOUCHSCREEN_ST1232) += st1232.o
obj-$(CONFIG_TOUCHSCREEN_STMPE) += stmpe-ts.o
+obj-$(CONFIG_TOUCHSCREEN_TI_TSCADC) += ti_tscadc.o
obj-$(CONFIG_TOUCHSCREEN_TNETV107X) += tnetv107x-ts.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHIT213) += touchit213.o
obj-$(CONFIG_TOUCHSCREEN_TOUCHRIGHT) += touchright.o
new file mode 100644
@@ -0,0 +1,460 @@
+/*
+ * TI Touch Screen driver.
+ *
+ * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/input.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/input/ti_tscadc.h>
+
+#define TSCADC_REG_IRQEOI 0x020
+#define TSCADC_REG_IRQSTATUS 0x028
+#define TSCADC_REG_IRQENABLE 0x02C
+#define TSCADC_REG_IRQWAKEUP 0x034
+#define TSCADC_REG_CTRL 0x040
+#define TSCADC_REG_ADCFSM 0x044
+#define TSCADC_REG_CLKDIV 0x04C
+#define TSCADC_REG_SE 0x054
+#define TSCADC_REG_IDLECONFIG 0x058
+#define TSCADC_REG_CHARGECONFIG 0x05C
+#define TSCADC_REG_STEPCONFIG1 0x064
+#define TSCADC_REG_STEPDELAY1 0x068
+#define TSCADC_REG_STEPCONFIG2 0x06C
+#define TSCADC_REG_STEPDELAY2 0x070
+#define TSCADC_REG_FIFO0 0x100
+
+/* Register Bitfields */
+#define TSCADC_IRQWKUP_ENB BIT(0)
+#define TSCADC_STPENB_STEPENB (7 << 0)
+#define TSCADC_IRQENB_IRQHWPEN BIT(10)
+#define TSCADC_IRQENB_IRQEOS BIT(1)
+#define TSCADC_IRQENB_FIFO_OVERFLOW BIT(3)
+#define TSCADC_IRQENB_PENUP BIT(9)
+#define TSCADC_STEPCONFIG_MODE_HWSYNC 0x3
+#define TSCADC_STEPCONFIG_2SAMPLES_AVG BIT(2)
+#define TSCADC_STEPCONFIG_XPP BIT(5)
+#define TSCADC_STEPCONFIG_XNN BIT(6)
+#define TSCADC_STEPCONFIG_YPP BIT(7)
+#define TSCADC_STEPCONFIG_YNN BIT(8)
+#define TSCADC_STEPCONFIG_XNP BIT(9)
+#define TSCADC_STEPCONFIG_YPN BIT(10)
+#define TSCADC_STEPCONFIG_RFP_X (1 << 12)
+#define TSCADC_STEPCONFIG_RFP_4_Y (1 << 13)
+#define TSCADC_STEPCONFIG_RFP_5_Y (1 << 12)
+#define TSCADC_STEPCONFIG_RFP_8_Y (1 << 13)
+#define TSCADC_STEPCONFIG_INM (1 << 18)
+#define TSCADC_STEPCONFIG_INP_4 (1 << 20)
+#define TSCADC_STEPCONFIG_INP_5 (1 << 21)
+#define TSCADC_STEPCONFIG_INP_8_X (3 << 20)
+#define TSCADC_STEPCONFIG_INP_8_Y (1 << 21)
+#define TSCADC_STEPCONFIG_RFM_4_X (1 << 23)
+#define TSCADC_STEPCONFIG_RFM_5_X (1 << 24)
+#define TSCADC_STEPCONFIG_RFM_8_X (1 << 23)
+#define TSCADC_STEPCONFIG_RFM_Y (1 << 24)
+#define TSCADC_STEPCONFIG_OPENDLY (0xf << 0)
+#define TSCADC_STEPCONFIG_SAMPLEDLY BIT(25)
+#define TSCADC_STEPCHARGE_INM BIT(18)
+#define TSCADC_STEPCHARGE_RFM (3 << 23)
+#define TSCADC_CNTRLREG_TSCSSENB BIT(0)
+#define TSCADC_CNTRLREG_STEPID BIT(1)
+#define TSCADC_CNTRLREG_STEPCONFIGWRT BIT(2)
+#define TSCADC_CNTRLREG_TSCENB BIT(7)
+#define TSCADC_CNTRLREG_4WIRE (0x1 << 5)
+#define TSCADC_CNTRLREG_5WIRE (0x1 << 6)
+#define TSCADC_CNTRLREG_8WIRE (0x3 << 5)
+#define TSCADC_ADCFSM_STEPID 0x10
+#define TSCADC_ADCFSM_FSM BIT(5)
+
+#define ADC_CLK 3000000
+
+#define MAX_12BIT ((1 << 12) - 1)
+
+struct tscadc {
+ struct input_dev *input;
+ struct clk *clk;
+ void __iomem *tsc_base;
+ unsigned int wires;
+ int irq;
+};
+
+static unsigned int tscadc_readl(struct tscadc *ts, unsigned int reg)
+{
+ return readl(ts->tsc_base + reg);
+}
+
+static void tscadc_writel(struct tscadc *tsc,
+ unsigned int reg, unsigned int val)
+{
+ writel(val, tsc->tsc_base + reg);
+}
+
+static void tsc_step_config(struct tscadc *ts_dev)
+{
+ int stepconfig1, stepconfig2, delay;
+
+ /* Configure the Step registers */
+ stepconfig1 = TSCADC_STEPCONFIG_MODE_HWSYNC |
+ TSCADC_STEPCONFIG_2SAMPLES_AVG | TSCADC_STEPCONFIG_XPP |
+ TSCADC_STEPCONFIG_XNN | TSCADC_STEPCONFIG_INM |
+ TSCADC_STEPCONFIG_RFP_X;
+
+ stepconfig2 = TSCADC_STEPCONFIG_MODE_HWSYNC |
+ TSCADC_STEPCONFIG_2SAMPLES_AVG | TSCADC_STEPCONFIG_YNN |
+ TSCADC_STEPCONFIG_INM | TSCADC_STEPCONFIG_RFM_Y;
+
+ switch (ts_dev->wires) {
+ case 4:
+ stepconfig1 |= TSCADC_STEPCONFIG_INP_4 |
+ TSCADC_STEPCONFIG_RFM_4_X;
+
+ stepconfig2 |= TSCADC_STEPCONFIG_YPP |
+ TSCADC_STEPCONFIG_RFP_4_Y;
+ break;
+
+ case 5:
+ stepconfig1 |= TSCADC_STEPCONFIG_YPP |
+ TSCADC_STEPCONFIG_YNN |
+ TSCADC_STEPCONFIG_INP_5 |
+ TSCADC_STEPCONFIG_RFM_5_X;
+
+ stepconfig2 |= TSCADC_STEPCONFIG_XPP |
+ TSCADC_STEPCONFIG_XNP |
+ TSCADC_STEPCONFIG_YPN |
+ TSCADC_STEPCONFIG_RFP_5_Y |
+ TSCADC_STEPCONFIG_INP_5;
+ break;
+
+ case 8:
+ stepconfig1 |= TSCADC_STEPCONFIG_INP_8_X |
+ TSCADC_STEPCONFIG_RFM_8_X;
+
+ stepconfig2 |= TSCADC_STEPCONFIG_YPP |
+ TSCADC_STEPCONFIG_RFP_8_Y |
+ TSCADC_STEPCONFIG_INP_8_Y;
+ break;
+ }
+
+ delay = TSCADC_STEPCONFIG_OPENDLY | TSCADC_STEPCONFIG_SAMPLEDLY;
+
+ tscadc_writel(ts_dev, TSCADC_REG_STEPCONFIG1, stepconfig1);
+ tscadc_writel(ts_dev, TSCADC_REG_STEPDELAY1, delay);
+ tscadc_writel(ts_dev, TSCADC_REG_STEPCONFIG2, stepconfig2);
+ tscadc_writel(ts_dev, TSCADC_REG_STEPDELAY2, delay);
+
+ tscadc_writel(ts_dev, TSCADC_REG_SE, TSCADC_STPENB_STEPENB);
+}
+
+static void tsc_idle_config(struct tscadc *ts_config)
+{
+ /* Idle mode touch screen config */
+ unsigned int idleconfig;
+
+ idleconfig = TSCADC_STEPCONFIG_YNN |
+ TSCADC_STEPCONFIG_RFP_X |
+ TSCADC_STEPCONFIG_INM ;
+
+ switch (ts_config->wires) {
+ case 4:
+ idleconfig |= TSCADC_STEPCONFIG_INP_4 |
+ TSCADC_STEPCONFIG_RFM_4_X;
+ break;
+
+ case 5:
+ idleconfig |= TSCADC_STEPCONFIG_INP_5 |
+ TSCADC_STEPCONFIG_RFM_5_X;
+ break;
+
+ case 8:
+ idleconfig |= TSCADC_STEPCONFIG_INP_4 |
+ TSCADC_STEPCONFIG_RFM_8_X;
+ break;
+ }
+
+ tscadc_writel(ts_config, TSCADC_REG_IDLECONFIG, idleconfig);
+}
+
+static irqreturn_t tscadc_interrupt(int irq, void *dev)
+{
+ struct tscadc *ts_dev = dev;
+ struct input_dev *input_dev = ts_dev->input;
+ unsigned int irqclr = 0;
+ unsigned int status, store, cntrlreg;
+ int absx, absy;
+ int charge, fsm;
+
+ status = tscadc_readl(ts_dev, TSCADC_REG_IRQSTATUS);
+ tscadc_writel(ts_dev, TSCADC_REG_SE, 0x0);
+
+ /* Pen touch event */
+ if (status & TSCADC_IRQENB_IRQHWPEN)
+ irqclr = TSCADC_IRQENB_IRQHWPEN;
+
+ if (status & TSCADC_IRQENB_PENUP) {
+ /* Pen up event */
+ charge = TSCADC_STEPCHARGE_INM | TSCADC_STEPCHARGE_RFM;
+ tscadc_writel(ts_dev, TSCADC_REG_CHARGECONFIG, charge);
+
+ input_report_key(input_dev, BTN_TOUCH, 0);
+ input_sync(input_dev);
+
+ tsc_idle_config(ts_dev);
+ irqclr |= TSCADC_IRQENB_PENUP;
+ }
+
+ if (status & TSCADC_IRQENB_IRQEOS) {
+ /* ADC is done with sampling, ready to read the data */
+ absx = tscadc_readl(ts_dev, TSCADC_REG_FIFO0);
+ absy = tscadc_readl(ts_dev, TSCADC_REG_FIFO0);
+
+ input_report_abs(input_dev, ABS_X, absx);
+ input_report_abs(input_dev, ABS_Y, absy);
+ input_report_key(input_dev, BTN_TOUCH, 1);
+ input_sync(input_dev);
+
+ irqclr |= TSCADC_IRQENB_IRQEOS;
+ }
+
+ if (status & TSCADC_IRQENB_FIFO_OVERFLOW) {
+ /* FIFO overflow condition */
+ cntrlreg = tscadc_readl(ts_dev, TSCADC_REG_CTRL);
+ cntrlreg &= ~TSCADC_CNTRLREG_TSCSSENB;
+ tscadc_writel(ts_dev, TSCADC_REG_CTRL, cntrlreg);
+
+ irqclr |= TSCADC_IRQENB_FIFO_OVERFLOW;
+ }
+
+ tscadc_writel(ts_dev, TSCADC_REG_IRQSTATUS, irqclr);
+ fsm = tscadc_readl(ts_dev, TSCADC_REG_ADCFSM);
+ if ((fsm & TSCADC_ADCFSM_FSM) &&
+ (fsm & TSCADC_ADCFSM_STEPID)) {
+ store = tscadc_readl(ts_dev, TSCADC_REG_CTRL);
+ store |= TSCADC_CNTRLREG_TSCSSENB;
+ tscadc_writel(ts_dev, TSCADC_REG_CTRL, store);
+ }
+
+ /* check pending interrupts */
+ tscadc_writel(ts_dev, TSCADC_REG_IRQEOI, 0x0);
+
+ tscadc_writel(ts_dev, TSCADC_REG_SE, TSCADC_STPENB_STEPENB);
+ return IRQ_HANDLED;
+}
+
+/*
+* The functions for inserting/removing driver as a module.
+*/
+
+static int __devinit tscadc_probe(struct platform_device *pdev)
+{
+ const struct tsc_data *pdata = pdev->dev.platform_data;
+ struct resource *res;
+ struct tscadc *ts_dev;
+ struct input_dev *input_dev;
+ int err;
+ int irq;
+ int clk_value;
+ int clock_rate, irqenable, ctrl;
+
+ if (!pdata) {
+ dev_err(&pdev->dev, "missing platform data.\n");
+ return -EINVAL;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev, "no memory resource defined.\n");
+ return -EINVAL;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "no IRQ is specified.\n");
+ return -EINVAL;
+ }
+
+ ts_dev = kzalloc(sizeof(struct tscadc), GFP_KERNEL);
+ input_dev = input_allocate_device();
+ if (!ts_dev || !input_dev) {
+ dev_err(&pdev->dev, "failed to allocate memory.\n");
+ err = -ENOMEM;
+ goto err_free_mem;
+ }
+
+ ts_dev->input = input_dev;
+ ts_dev->irq = irq;
+ ts_dev->wires = pdata->wires;
+
+ res = request_mem_region(res->start, resource_size(res), pdev->name);
+ if (!res) {
+ dev_err(&pdev->dev, "failed to reserve registers.\n");
+ err = -EBUSY;
+ goto err_free_mem;
+ }
+
+ ts_dev->tsc_base = ioremap(res->start, resource_size(res));
+ if (!ts_dev->tsc_base) {
+ dev_err(&pdev->dev, "failed to map registers.\n");
+ err = -ENOMEM;
+ goto err_release_mem_region;
+ }
+
+ err = request_irq(ts_dev->irq, tscadc_interrupt, IRQF_DISABLED,
+ pdev->dev.driver->name, ts_dev);
+ if (err) {
+ dev_err(&pdev->dev, "failed to allocate irq.\n");
+ goto err_unmap_regs;
+ }
+
+ ts_dev->clk = clk_get(&pdev->dev, "tsc_clk");
+ if (IS_ERR(ts_dev->clk)) {
+ dev_err(&pdev->dev, "failed to get ts_clk\n");
+ err = PTR_ERR(ts_dev->clk);
+ goto err_free_irq;
+ }
+ clk_enable(ts_dev->clk);
+
+ clock_rate = clk_get_rate(ts_dev->clk);
+ clk_value = clock_rate / ADC_CLK;
+ if (clk_value < 7) {
+ dev_err(&pdev->dev, "clock input less than min clock requirement\n");
+ goto err_disable_clk;
+ }
+
+ /* TSCADC_CLKDIV needs to be configured to the value minus 1 */
+ clk_value = clk_value - 1;
+ tscadc_writel(ts_dev, TSCADC_REG_CLKDIV, clk_value);
+
+ /* Enable wake-up of the SoC using touchscreen */
+ tscadc_writel(ts_dev, TSCADC_REG_IRQWAKEUP, TSCADC_IRQWKUP_ENB);
+
+ /* Set the control register bits */
+ ctrl = TSCADC_CNTRLREG_STEPCONFIGWRT |
+ TSCADC_CNTRLREG_TSCENB |
+ TSCADC_CNTRLREG_STEPID;
+
+ switch (ts_dev->wires) {
+ case 4:
+ ctrl |= TSCADC_CNTRLREG_4WIRE;
+ break;
+
+ case 5:
+ ctrl |= TSCADC_CNTRLREG_5WIRE;
+ break;
+
+ case 8:
+ ctrl |= TSCADC_CNTRLREG_8WIRE;
+ break;
+ }
+
+ tscadc_writel(ts_dev, TSCADC_REG_CTRL, ctrl);
+
+ /* Set register bits for Idel Config Mode */
+ tsc_idle_config(ts_dev);
+
+ /* IRQ Enable */
+ irqenable = TSCADC_IRQENB_IRQHWPEN |
+ TSCADC_IRQENB_IRQEOS |
+ TSCADC_IRQENB_PENUP | TSCADC_IRQENB_FIFO_OVERFLOW;
+ tscadc_writel(ts_dev, TSCADC_REG_IRQENABLE, irqenable);
+
+ tsc_step_config(ts_dev);
+
+ ctrl |= TSCADC_CNTRLREG_TSCSSENB;
+ tscadc_writel(ts_dev, TSCADC_REG_CTRL, ctrl);
+
+ input_dev->name = "ti-tsc-adcc";
+ input_dev->dev.parent = &pdev->dev;
+
+ input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
+ input_dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+
+ input_set_abs_params(input_dev, ABS_X, 0, MAX_12BIT, 0, 0);
+ input_set_abs_params(input_dev, ABS_Y, 0, MAX_12BIT, 0, 0);
+
+ /* register to the input system */
+ err = input_register_device(input_dev);
+ if (err)
+ goto err_disable_clk;
+
+ platform_set_drvdata(pdev, ts_dev);
+ return 0;
+
+err_disable_clk:
+ clk_disable(ts_dev->clk);
+ clk_put(ts_dev->clk);
+err_free_irq:
+ free_irq(ts_dev->irq, ts_dev);
+err_unmap_regs:
+ iounmap(ts_dev->tsc_base);
+err_release_mem_region:
+ release_mem_region(res->start, resource_size(res));
+err_free_mem:
+ input_free_device(input_dev);
+ kfree(ts_dev);
+ return err;
+}
+
+static int __devexit tscadc_remove(struct platform_device *pdev)
+{
+ struct tscadc *ts_dev = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ free_irq(ts_dev->irq, ts_dev);
+
+ input_unregister_device(ts_dev->input);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ iounmap(ts_dev->tsc_base);
+ release_mem_region(res->start, resource_size(res));
+
+ clk_disable(ts_dev->clk);
+ clk_put(ts_dev->clk);
+
+ kfree(ts_dev);
+
+ platform_set_drvdata(pdev, NULL);
+ return 0;
+}
+
+static struct platform_driver ti_tsc_driver = {
+ .probe = tscadc_probe,
+ .remove = __devexit_p(tscadc_remove),
+ .driver = {
+ .name = "tsc",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init ti_tsc_init(void)
+{
+ return platform_driver_register(&ti_tsc_driver);
+}
+module_init(ti_tsc_init);
+
+static void __exit ti_tsc_exit(void)
+{
+ platform_driver_unregister(&ti_tsc_driver);
+}
+module_exit(ti_tsc_exit);
+
+MODULE_DESCRIPTION("TI touchscreen controller driver");
+MODULE_AUTHOR("Rachna Patil <rachna@ti.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tsc");
new file mode 100644
@@ -0,0 +1,15 @@
+#ifndef __LINUX_TI_TSCADC_H
+#define __LINUX_TI_TSCADC_H
+
+/**
+ * struct tsc_data Touchscreen wire configuration
+ * @wires: Wires refer to application modes
+ * i.e. 4/5/8 wire touchscreen support
+ * on the platform
+ */
+
+struct tsc_data {
+ unsigned int wires;
+};
+
+#endif