diff --git a/drivers/input/mouse/synaptics.c b/drivers/input/mouse/synaptics.c
index e8573c6..fd23181 100644
--- a/drivers/input/mouse/synaptics.c
+++ b/drivers/input/mouse/synaptics.c
@@ -629,10 +629,61 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 			 ((buf[0] & 0x04) >> 1) |
 			 ((buf[3] & 0x04) >> 2));
 
+		if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
+			SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
+		    hw->w == 2) {
+			synaptics_parse_agm(buf, priv, hw);
+			return 1;
+		}
+
+		hw->x = (((buf[3] & 0x10) << 8) |
+			 ((buf[1] & 0x0f) << 8) |
+			 buf[4]);
+		hw->y = (((buf[3] & 0x20) << 7) |
+			 ((buf[1] & 0xf0) << 4) |
+			 buf[5]);
+		hw->z = buf[2];
+
 		hw->left  = (buf[0] & 0x01) ? 1 : 0;
 		hw->right = (buf[0] & 0x02) ? 1 : 0;
 
-		if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
+		if (SYN_CAP_FORCEPAD(priv->ext_cap_0c)) {
+			/*
+			 * ForcePads, like Clickpads, use middle button
+			 * bits to report primary button clicks.
+			 * Unfortunately they report primary button not
+			 * only when user presses on the pad above certain
+			 * threshold, but also when there are more than one
+			 * finger on the touchpad, which interferes with
+			 * out multi-finger gestures.
+			 */
+			if (hw->z == 0) {
+				/* No contacts */
+				priv->press = priv->report_press = false;
+			} else if (hw->w >= 4 && ((buf[0] ^ buf[3]) & 0x01)) {
+				/*
+				 * Single-finger touch with pressure above
+				 * the threshold. If pressure stays long
+				 * enough, we'll start reporting primary
+				 * button. We rely on the device continuing
+				 * sending data even if finger does not
+				 * move.
+				 */
+				if  (!priv->press) {
+					priv->press_start = jiffies;
+					priv->press = true;
+				} else if (time_after(jiffies,
+						priv->press_start +
+							msecs_to_jiffies(50))) {
+					priv->report_press = true;
+				}
+			} else {
+				priv->press = false;
+			}
+
+			hw->left = priv->report_press;
+
+		} else if (SYN_CAP_CLICKPAD(priv->ext_cap_0c)) {
 			/*
 			 * Clickpad's button is transmitted as middle button,
 			 * however, since it is primary button, we will report
@@ -651,21 +702,6 @@ static int synaptics_parse_hw_state(const unsigned char buf[],
 			hw->down = ((buf[0] ^ buf[3]) & 0x02) ? 1 : 0;
 		}
 
-		if ((SYN_CAP_ADV_GESTURE(priv->ext_cap_0c) ||
-			SYN_CAP_IMAGE_SENSOR(priv->ext_cap_0c)) &&
-		    hw->w == 2) {
-			synaptics_parse_agm(buf, priv, hw);
-			return 1;
-		}
-
-		hw->x = (((buf[3] & 0x10) << 8) |
-			 ((buf[1] & 0x0f) << 8) |
-			 buf[4]);
-		hw->y = (((buf[3] & 0x20) << 7) |
-			 ((buf[1] & 0xf0) << 4) |
-			 buf[5]);
-		hw->z = buf[2];
-
 		if (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) &&
 		    ((buf[0] ^ buf[3]) & 0x02)) {
 			switch (SYN_CAP_MULTI_BUTTON_NO(priv->ext_cap) & ~0x01) {
diff --git a/drivers/input/mouse/synaptics.h b/drivers/input/mouse/synaptics.h
index e594af0..fb2e076 100644
--- a/drivers/input/mouse/synaptics.h
+++ b/drivers/input/mouse/synaptics.h
@@ -78,6 +78,11 @@
  * 2	0x08	image sensor		image sensor tracks 5 fingers, but only
  *					reports 2.
  * 2	0x20	report min		query 0x0f gives min coord reported
+ * 2	0x80	forcepad		forcepad is a variant of clickpad that
+ *					does not have physical buttons but rather
+ *					uses pressure above certain threshold to
+ *					report primary clicks. Forcepads also have
+ *					clickpad bit set.
  */
 #define SYN_CAP_CLICKPAD(ex0c)		((ex0c) & 0x100000) /* 1-button ClickPad */
 #define SYN_CAP_CLICKPAD2BTN(ex0c)	((ex0c) & 0x000100) /* 2-button ClickPad */
@@ -86,6 +91,7 @@
 #define SYN_CAP_ADV_GESTURE(ex0c)	((ex0c) & 0x080000)
 #define SYN_CAP_REDUCED_FILTERING(ex0c)	((ex0c) & 0x000400)
 #define SYN_CAP_IMAGE_SENSOR(ex0c)	((ex0c) & 0x000800)
+#define SYN_CAP_FORCEPAD(ex0c)		((ex0c) & 0x008000)
 
 /* synaptics modes query bits */
 #define SYN_MODE_ABSOLUTE(m)		((m) & (1 << 7))
@@ -177,6 +183,11 @@ struct synaptics_data {
 	 */
 	struct synaptics_hw_state agm;
 	bool agm_pending;			/* new AGM packet received */
+
+	/* ForcePad handling */
+	unsigned long				press_start;
+	bool					press;
+	bool					report_press;
 };
 
 void synaptics_module_init(void);
