@@ -1887,6 +1887,9 @@ static const struct hid_device_id hid_have_special_driver[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, 0x0011) },
#if IS_ENABLED(CONFIG_HID_MAYFLASH)
{ HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE2) },
#endif
{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_WN) },
{ HID_USB_DEVICE(USB_VENDOR_ID_DREAM_CHEEKY, USB_DEVICE_ID_DREAM_CHEEKY_FA) },
@@ -6,12 +6,14 @@
*
* Tested with:
* 0079:1801 "DragonRise Inc. Mayflash PS3 Game Controller Adapter"
+ * 0079:1803 "DragonRise Inc. Mayflash Wireless Sensor DolphinBar"
+ * 0079:1843 "DragonRise Inc. Mayflash GameCube Game Controller Adapter"
+ * 0079:1844 "DragonRise Inc. Mayflash GameCube Game Controller Adapter (v04)"
*
* The following adapters probably work too, but need to be tested:
* 0079:1800 "DragonRise Inc. Mayflash WIIU Game Controller Adapter"
- * 0079:1843 "DragonRise Inc. Mayflash GameCube Game Controller Adapter"
*
- * Copyright (c) 2016 Marcel Hasler <mahasler@gmail.com>
+ * Copyright (c) 2016-2017 Marcel Hasler <mahasler@gmail.com>
*/
/*
@@ -125,8 +127,8 @@ static int mf_probe(struct hid_device *hid, const struct hid_device_id *id)
dev_dbg(&hid->dev, "Mayflash HID hardware probe...\n");
- /* Split device into four inputs */
- hid->quirks |= HID_QUIRK_MULTI_INPUT;
+ /* Apply quirks as needed */
+ hid->quirks |= id->driver_data;
error = hid_parse(hid);
if (error) {
@@ -151,7 +153,14 @@ static int mf_probe(struct hid_device *hid, const struct hid_device_id *id)
}
static const struct hid_device_id mf_devices[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3), },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_PS3),
+ .driver_data = HID_QUIRK_MULTI_INPUT },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_DOLPHINBAR),
+ .driver_data = HID_QUIRK_MULTI_INPUT },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE1),
+ .driver_data = HID_QUIRK_MULTI_INPUT },
+ { HID_USB_DEVICE(USB_VENDOR_ID_DRAGONRISE, USB_DEVICE_ID_DRAGONRISE_GAMECUBE2),
+ .driver_data = 0 }, /* No quirk required */
{ }
};
MODULE_DEVICE_TABLE(hid, mf_devices);
The Mayflash DolphinBar and GameCube adapters have been tested and confirmed to work using the hid-mf driver. Signed-off-by: Marcel Hasler <mahasler@gmail.com> --- drivers/hid/hid-core.c | 3 +++ drivers/hid/hid-mf.c | 19 ++++++++++++++----- 2 files changed, 17 insertions(+), 5 deletions(-)