diff mbox

[1/2] input: keyboard: DT bindings for the D-Link DIR-685 touchpad

Message ID 20170430205500.28799-1-linus.walleij@linaro.org (mailing list archive)
State New, archived
Headers show

Commit Message

Linus Walleij April 30, 2017, 8:55 p.m. UTC
This adds device tree bindings for the D-Link DIR-685 touchpad.
It's a simple homebrewn touchpad on I2C.

Cc: devicetree@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
---
 .../bindings/input/dlink,dir685-touchpad.txt        | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/dlink,dir685-touchpad.txt

Comments

Rob Herring (Arm) May 5, 2017, 8:09 p.m. UTC | #1
On Sun, Apr 30, 2017 at 10:55:00PM +0200, Linus Walleij wrote:
> This adds device tree bindings for the D-Link DIR-685 touchpad.
> It's a simple homebrewn touchpad on I2C.
> 
> Cc: devicetree@vger.kernel.org
> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
> ---
>  .../bindings/input/dlink,dir685-touchpad.txt        | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/input/dlink,dir685-touchpad.txt

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/input/dlink,dir685-touchpad.txt b/Documentation/devicetree/bindings/input/dlink,dir685-touchpad.txt
new file mode 100644
index 000000000000..25bc538a6e39
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/dlink,dir685-touchpad.txt
@@ -0,0 +1,21 @@ 
+* D-Link DIR-685 Touchpad
+
+This is a I2C one-off touchpad controller based on the Cypress Semiconductor
+CY8C214 MCU with some firmware in its internal 8KB flash. The circuit
+board inside the router is named E119921.
+
+The touchpad device node should be placed inside an I2C bus node.
+
+Required properties:
+- compatible: must be "dlink,dir685-touchpad"
+- reg: the I2C address of the touchpad
+- interrupts: reference to the interrupt number
+
+Example:
+
+touchpad@26 {
+	compatible = "dlink,dir685-touchpad";
+	reg = <0x26>;
+	interrupt-parent = <&gpio0>;
+	interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+};