| Message ID | 20170822055710.26515-4-tiwai@suse.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Tue, 2017-08-22 at 07:57 +0200, Takashi Iwai wrote: > This patch adds the opregion driver for Dollar Cove TI PMIC on Intel > Cherry Trail devices. The patch is based on the original work by > Intel, found at: > https://github.com/01org/ProductionKernelQuilts > with many cleanups and rewrites. > > The driver is currently provided only as built-in to follow other > PMIC opregion drivers convention. > > The re-enumeration of devices at probe is required for fixing the > issues on HP x2 210 G2. See bug#195689. > > > +static int dc_ti_pmic_get_raw_temp(struct regmap *regmap, int reg) > +{ > + int temp_l, temp_h; > + > + if (regmap_read(regmap, reg, &temp_l) || > + regmap_read(regmap, reg - 1, &temp_h)) > + return -EIO; > + > + return temp_l | (temp_h & 0x3) << 8; > +} I'm not sure I understand this "- 1" part along with choice of l and h suffixes. Does it mean the register is big endian?
On Tue, 22 Aug 2017 11:58:35 +0200, Andy Shevchenko wrote: > > On Tue, 2017-08-22 at 07:57 +0200, Takashi Iwai wrote: > > This patch adds the opregion driver for Dollar Cove TI PMIC on Intel > > Cherry Trail devices. The patch is based on the original work by > > Intel, found at: > > https://github.com/01org/ProductionKernelQuilts > > with many cleanups and rewrites. > > > > The driver is currently provided only as built-in to follow other > > PMIC opregion drivers convention. > > > > The re-enumeration of devices at probe is required for fixing the > > issues on HP x2 210 G2. See bug#195689. > > > > > > > +static int dc_ti_pmic_get_raw_temp(struct regmap *regmap, int reg) > > +{ > > + int temp_l, temp_h; > > + > > + if (regmap_read(regmap, reg, &temp_l) || > > + regmap_read(regmap, reg - 1, &temp_h)) > > + return -EIO; > > + > > + return temp_l | (temp_h & 0x3) << 8; > > +} > > I'm not sure I understand this "- 1" part along with choice of l and h > suffixes. > > Does it mean the register is big endian? Good point, I need to check the original code and the values. This can be a typo of '+', of course. thanks, Takashi -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 22 Aug 2017 12:25:12 +0200, Takashi Iwai wrote: > > On Tue, 22 Aug 2017 11:58:35 +0200, > Andy Shevchenko wrote: > > > > On Tue, 2017-08-22 at 07:57 +0200, Takashi Iwai wrote: > > > This patch adds the opregion driver for Dollar Cove TI PMIC on Intel > > > Cherry Trail devices. The patch is based on the original work by > > > Intel, found at: > > > https://github.com/01org/ProductionKernelQuilts > > > with many cleanups and rewrites. > > > > > > The driver is currently provided only as built-in to follow other > > > PMIC opregion drivers convention. > > > > > > The re-enumeration of devices at probe is required for fixing the > > > issues on HP x2 210 G2. See bug#195689. > > > > > > > > > > > +static int dc_ti_pmic_get_raw_temp(struct regmap *regmap, int reg) > > > +{ > > > + int temp_l, temp_h; > > > + > > > + if (regmap_read(regmap, reg, &temp_l) || > > > + regmap_read(regmap, reg - 1, &temp_h)) > > > + return -EIO; > > > + > > > + return temp_l | (temp_h & 0x3) << 8; > > > +} > > > > I'm not sure I understand this "- 1" part along with choice of l and h > > suffixes. > > > > Does it mean the register is big endian? > > Good point, I need to check the original code and the values. It's really big-endian, the order is hi:lo. But, admittedly, the temperature code hasn't been tested, and it's possibly missing something. So I'm fine to drop that part in the first version, too. thanks, Takashi -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2017-08-22 at 13:01 +0200, Takashi Iwai wrote: > On Tue, 22 Aug 2017 12:25:12 +0200, > Takashi Iwai wrote: > > > > On Tue, 22 Aug 2017 11:58:35 +0200, > > Andy Shevchenko wrote: > > > > > > On Tue, 2017-08-22 at 07:57 +0200, Takashi Iwai wrote: > > > > This patch adds the opregion driver for Dollar Cove TI PMIC on > > > > Intel > > > > Cherry Trail devices. The patch is based on the original work > > > > by > > > > Intel, found at: > > > > https://github.com/01org/ProductionKernelQuilts > > > > with many cleanups and rewrites. > > > > > > > > The driver is currently provided only as built-in to follow > > > > other > > > > PMIC opregion drivers convention. > > > > > > > > The re-enumeration of devices at probe is required for fixing > > > > the > > > > issues on HP x2 210 G2. See bug#195689. > > > > > > > > > > > > +static int dc_ti_pmic_get_raw_temp(struct regmap *regmap, int > > > > reg) > > > > +{ > > > > + int temp_l, temp_h; > > > > + > > > > + if (regmap_read(regmap, reg, &temp_l) || > > > > + regmap_read(regmap, reg - 1, &temp_h)) > > > > + return -EIO; > > > > + > > > > + return temp_l | (temp_h & 0x3) << 8; > > > > +} > > > > > > I'm not sure I understand this "- 1" part along with choice of l > > > and h > > > suffixes. > > > > > > Does it mean the register is big endian? > > > > Good point, I need to check the original code and the values. > > It's really big-endian, the order is hi:lo. > > But, admittedly, the temperature code hasn't been tested, and it's > possibly missing something. So I'm fine to drop that part in the > first version, too. I don't know if regmap allows you to define registers with different sizes for same chip, perhaps it would make sense to start register from hi part (and not doing non-intuitive "- 1", or maybe "+ 1" instead) and mark it in comment that is BE16.
On Tue, 22 Aug 2017 13:37:21 +0200, Andy Shevchenko wrote: > > On Tue, 2017-08-22 at 13:01 +0200, Takashi Iwai wrote: > > On Tue, 22 Aug 2017 12:25:12 +0200, > > Takashi Iwai wrote: > > > > > > On Tue, 22 Aug 2017 11:58:35 +0200, > > > Andy Shevchenko wrote: > > > > > > > > On Tue, 2017-08-22 at 07:57 +0200, Takashi Iwai wrote: > > > > > This patch adds the opregion driver for Dollar Cove TI PMIC on > > > > > Intel > > > > > Cherry Trail devices. The patch is based on the original work > > > > > by > > > > > Intel, found at: > > > > > https://github.com/01org/ProductionKernelQuilts > > > > > with many cleanups and rewrites. > > > > > > > > > > The driver is currently provided only as built-in to follow > > > > > other > > > > > PMIC opregion drivers convention. > > > > > > > > > > The re-enumeration of devices at probe is required for fixing > > > > > the > > > > > issues on HP x2 210 G2. See bug#195689. > > > > > > > > > > > > > > > +static int dc_ti_pmic_get_raw_temp(struct regmap *regmap, int > > > > > reg) > > > > > +{ > > > > > + int temp_l, temp_h; > > > > > + > > > > > + if (regmap_read(regmap, reg, &temp_l) || > > > > > + regmap_read(regmap, reg - 1, &temp_h)) > > > > > + return -EIO; > > > > > + > > > > > + return temp_l | (temp_h & 0x3) << 8; > > > > > +} > > > > > > > > I'm not sure I understand this "- 1" part along with choice of l > > > > and h > > > > suffixes. > > > > > > > > Does it mean the register is big endian? > > > > > > Good point, I need to check the original code and the values. > > > > It's really big-endian, the order is hi:lo. > > > > But, admittedly, the temperature code hasn't been tested, and it's > > possibly missing something. So I'm fine to drop that part in the > > first version, too. > > I don't know if regmap allows you to define registers with different > sizes for same chip, perhaps it would make sense to start register from > hi part (and not doing non-intuitive "- 1", or maybe "+ 1" instead) and > mark it in comment that is BE16. I don't think regmap would allow different bit size, so combining still needed. But yeah, it's better to start from the high register with the lower address and use +1. thanks, Takashi -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2017-08-22 at 14:37 +0300, Andy Shevchenko wrote: > On Tue, 2017-08-22 at 13:01 +0200, Takashi Iwai wrote: > > On Tue, 22 Aug 2017 12:25:12 +0200, > > Takashi Iwai wrote: > > > > Does it mean the register is big endian? > > > > > > Good point, I need to check the original code and the values. > > > > It's really big-endian, the order is hi:lo. > > > > But, admittedly, the temperature code hasn't been tested, and it's > > possibly missing something. So I'm fine to drop that part in the > > first version, too. > > I don't know if regmap allows you to define registers with different > sizes for same chip, perhaps it would make sense to start register > from > hi part (and not doing non-intuitive "- 1", or maybe "+ 1" instead) > and > mark it in comment that is BE16. I have just checked datasheet, so, there are 4 pairs of BE16 registers. VBAT (Hi:Lo) 0x54 DIETEMP 0x56 BPTHERM 0x58 GPADC 0x5a So, I would create a separate address mapping for them, dropping out that _LOW suffix and put a comment that they are BE16 since ADC has 10- bit resolution. Or even do a separate ADC driver under drivers/iio/adc for PMIC(s).
On Tue, 22 Aug 2017 14:08:27 +0200, Andy Shevchenko wrote: > > On Tue, 2017-08-22 at 14:37 +0300, Andy Shevchenko wrote: > > On Tue, 2017-08-22 at 13:01 +0200, Takashi Iwai wrote: > > > On Tue, 22 Aug 2017 12:25:12 +0200, > > > Takashi Iwai wrote: > > > > > > Does it mean the register is big endian? > > > > > > > > Good point, I need to check the original code and the values. > > > > > > It's really big-endian, the order is hi:lo. > > > > > > But, admittedly, the temperature code hasn't been tested, and it's > > > possibly missing something. So I'm fine to drop that part in the > > > first version, too. > > > > I don't know if regmap allows you to define registers with different > > sizes for same chip, perhaps it would make sense to start register > > from > > hi part (and not doing non-intuitive "- 1", or maybe "+ 1" instead) > > and > > mark it in comment that is BE16. > > I have just checked datasheet, so, there are 4 pairs of BE16 registers. > > VBAT (Hi:Lo) 0x54 > DIETEMP 0x56 > BPTHERM 0x58 > GPADC 0x5a > > So, I would create a separate address mapping for them, dropping out > that _LOW suffix and put a comment that they are BE16 since ADC has 10- > bit resolution. Yep, done in that way now. Also I changed the register names to follow your reference. > Or even do a separate ADC driver under drivers/iio/adc for PMIC(s). That's another option, but I took an easier path as the first step. thanks, Takashi -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Tue, 2017-08-22 at 14:26 +0200, Takashi Iwai wrote: > On Tue, 22 Aug 2017 14:08:27 +0200, > Andy Shevchenko wrote: > > > > > Or even do a separate ADC driver under drivers/iio/adc for PMIC(s). > > That's another option, but I took an easier path as the first step. Looking to the current pattern we have ADC being referred from ACPI PMIC OpRegion drivers, so, I have to withdraw my proposal.
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 1ce52f84dc23..9da8dcefde7b 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -521,6 +521,12 @@ config CHT_WC_PMIC_OPREGION help This config adds ACPI operation region support for CHT Whiskey Cove PMIC. +config DC_TI_PMIC_OPREGION + bool "ACPI operation region support for Dollar Cove TI PMIC" + depends on INTEL_SOC_PMIC_DC_TI + help + This config adds ACPI operation region support for Dollar Cove TI PMIC. + endif config ACPI_CONFIGFS diff --git a/drivers/acpi/Makefile b/drivers/acpi/Makefile index b1aacfc62b1f..0a9008b971af 100644 --- a/drivers/acpi/Makefile +++ b/drivers/acpi/Makefile @@ -103,6 +103,7 @@ obj-$(CONFIG_CRC_PMIC_OPREGION) += pmic/intel_pmic_crc.o obj-$(CONFIG_XPOWER_PMIC_OPREGION) += pmic/intel_pmic_xpower.o obj-$(CONFIG_BXT_WC_PMIC_OPREGION) += pmic/intel_pmic_bxtwc.o obj-$(CONFIG_CHT_WC_PMIC_OPREGION) += pmic/intel_pmic_chtwc.o +obj-$(CONFIG_DC_TI_PMIC_OPREGION) += pmic/intel_pmic_dc_ti.o obj-$(CONFIG_ACPI_CONFIGFS) += acpi_configfs.o diff --git a/drivers/acpi/pmic/intel_pmic_dc_ti.c b/drivers/acpi/pmic/intel_pmic_dc_ti.c new file mode 100644 index 000000000000..236ff31c5a79 --- /dev/null +++ b/drivers/acpi/pmic/intel_pmic_dc_ti.c @@ -0,0 +1,135 @@ +/* + * intel_pmic_dc_ti.c - TI Dollar Cove PMIC operation region driver + * Copyright (C) 2014 Intel Corporation. All rights reserved. + * + * Rewritten and cleaned up + * Copyright (C) 2017 Takashi Iwai <tiwai@suse.de> + */ + +#include <linux/init.h> +#include <linux/acpi.h> +#include <linux/platform_device.h> +#include <linux/mfd/intel_soc_pmic.h> +#include "intel_pmic.h" + +#define TI_DC_PMICTEMP_LOW 0x57 +#define TI_DC_BATTEMP_LOW 0x59 +#define TI_DC_GPADC_LOW 0x5b + +static struct pmic_table dc_ti_power_table[] = { + { .address = 0x00, .reg = 0x41 }, + { .address = 0x04, .reg = 0x42 }, + { .address = 0x08, .reg = 0x43 }, + { .address = 0x0c, .reg = 0x45 }, + { .address = 0x10, .reg = 0x46 }, + { .address = 0x14, .reg = 0x47 }, + { .address = 0x18, .reg = 0x48 }, + { .address = 0x1c, .reg = 0x49 }, + { .address = 0x20, .reg = 0x4a }, + { .address = 0x24, .reg = 0x4b }, + { .address = 0x28, .reg = 0x4c }, + { .address = 0x2c, .reg = 0x4d }, + { .address = 0x30, .reg = 0x4e }, +}; + +static struct pmic_table dc_ti_thermal_table[] = { + { + .address = 0x00, + .reg = TI_DC_GPADC_LOW + }, + { + .address = 0x0c, + .reg = TI_DC_GPADC_LOW + }, + /* TMP2 -> SYSTEMP */ + { + .address = 0x18, + .reg = TI_DC_GPADC_LOW + }, + /* TMP3 -> BATTEMP */ + { + .address = 0x24, + .reg = TI_DC_BATTEMP_LOW + }, + { + .address = 0x30, + .reg = TI_DC_GPADC_LOW + }, + /* TMP5 -> PMICTEMP */ + { + .address = 0x3c, + .reg = TI_DC_PMICTEMP_LOW + }, +}; + +static int dc_ti_pmic_get_power(struct regmap *regmap, int reg, int bit, + u64 *value) +{ + int data; + + if (regmap_read(regmap, reg, &data)) + return -EIO; + + *value = data & 1; + return 0; +} + +static int dc_ti_pmic_update_power(struct regmap *regmap, int reg, int bit, + bool on) +{ + return regmap_update_bits(regmap, reg, 1, on); +} + +static int dc_ti_pmic_get_raw_temp(struct regmap *regmap, int reg) +{ + int temp_l, temp_h; + + if (regmap_read(regmap, reg, &temp_l) || + regmap_read(regmap, reg - 1, &temp_h)) + return -EIO; + + return temp_l | (temp_h & 0x3) << 8; +} + +static struct intel_pmic_opregion_data dc_ti_pmic_opregion_data = { + .get_power = dc_ti_pmic_get_power, + .update_power = dc_ti_pmic_update_power, + .get_raw_temp = dc_ti_pmic_get_raw_temp, + .power_table = dc_ti_power_table, + .power_table_count = ARRAY_SIZE(dc_ti_power_table), + .thermal_table = dc_ti_thermal_table, + .thermal_table_count = ARRAY_SIZE(dc_ti_thermal_table), +}; + +static int dc_ti_pmic_opregion_probe(struct platform_device *pdev) +{ + struct intel_soc_pmic *pmic = dev_get_drvdata(pdev->dev.parent); + int err; + + err = intel_pmic_install_opregion_handler(&pdev->dev, + ACPI_HANDLE(pdev->dev.parent), pmic->regmap, + &dc_ti_pmic_opregion_data); + if (err < 0) + return err; + + /* Re-enumerate devices depending on PMIC */ + acpi_walk_dep_device_list(ACPI_HANDLE(pdev->dev.parent)); + return 0; +} + +static struct platform_device_id dc_ti_pmic_opregion_id_table[] = { + { .name = "dc_ti_region" }, + {}, +}; + +static struct platform_driver dc_ti_pmic_opregion_driver = { + .probe = dc_ti_pmic_opregion_probe, + .driver = { + .name = "dollar_cove_ti_pmic", + }, + .id_table = dc_ti_pmic_opregion_id_table, +}; +module_platform_driver(dc_ti_pmic_opregion_driver); + +MODULE_DESCRIPTION("Dollar Cove TI PMIC opregion driver"); +MODULE_LICENSE("GPLv2");
This patch adds the opregion driver for Dollar Cove TI PMIC on Intel Cherry Trail devices. The patch is based on the original work by Intel, found at: https://github.com/01org/ProductionKernelQuilts with many cleanups and rewrites. The driver is currently provided only as built-in to follow other PMIC opregion drivers convention. The re-enumeration of devices at probe is required for fixing the issues on HP x2 210 G2. See bug#195689. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=193891 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195689 Signed-off-by: Takashi Iwai <tiwai@suse.de> --- drivers/acpi/Kconfig | 6 ++ drivers/acpi/Makefile | 1 + drivers/acpi/pmic/intel_pmic_dc_ti.c | 135 +++++++++++++++++++++++++++++++++++ 3 files changed, 142 insertions(+) create mode 100644 drivers/acpi/pmic/intel_pmic_dc_ti.c