@@ -12,8 +12,54 @@
#include <linux/platform_device.h>
#include <linux/input-polldev.h>
#include <linux/gpio.h>
-#include <linux/gpio_mouse.h>
+#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00
+#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01
+
+#define GPIO_MOUSE_PIN_UP 0
+#define GPIO_MOUSE_PIN_DOWN 1
+#define GPIO_MOUSE_PIN_LEFT 2
+#define GPIO_MOUSE_PIN_RIGHT 3
+#define GPIO_MOUSE_PIN_BLEFT 4
+#define GPIO_MOUSE_PIN_BMIDDLE 5
+#define GPIO_MOUSE_PIN_BRIGHT 6
+#define GPIO_MOUSE_PIN_MAX 7
+
+/**
+ * struct gpio_mouse_platform_data
+ * @scan_ms: integer in ms specifying the scan periode.
+ * @polarity: Pin polarity, active high or low.
+ * @up: GPIO line for up value.
+ * @down: GPIO line for down value.
+ * @left: GPIO line for left value.
+ * @right: GPIO line for right value.
+ * @bleft: GPIO line for left button.
+ * @bmiddle: GPIO line for middle button.
+ * @bright: GPIO line for right button.
+ * @pins: GPIO line numbers used for the mouse.
+ *
+ * This struct must be added to the platform_device in the board code.
+ * It is used by the gpio_mouse driver to setup GPIO lines and to
+ * calculate mouse movement.
+ */
+struct gpio_mouse_platform_data {
+ int scan_ms;
+ int polarity;
+
+ union {
+ struct {
+ int up;
+ int down;
+ int left;
+ int right;
+
+ int bleft;
+ int bmiddle;
+ int bright;
+ };
+ int pins[GPIO_MOUSE_PIN_MAX];
+ };
+};
/*
* Timer function which is run every scan_ms ms when the device is opened.
@@ -47,17 +93,16 @@ static void gpio_mouse_scan(struct input_polled_dev *dev)
static int gpio_mouse_probe(struct platform_device *pdev)
{
- struct gpio_mouse_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct device *dev = &pdev->dev;
+ struct gpio_mouse_platform_data *pdata;
struct input_polled_dev *input_poll;
struct input_dev *input;
int pin, i;
int error;
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data\n");
- error = -ENXIO;
- goto out;
- }
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
if (pdata->scan_ms < 0) {
dev_err(&pdev->dev, "invalid scan time\n");
deleted file mode 100644
@@ -1,61 +0,0 @@
-/*
- * Driver for simulating a mouse on GPIO lines.
- *
- * Copyright (C) 2007 Atmel Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _GPIO_MOUSE_H
-#define _GPIO_MOUSE_H
-
-#define GPIO_MOUSE_POLARITY_ACT_HIGH 0x00
-#define GPIO_MOUSE_POLARITY_ACT_LOW 0x01
-
-#define GPIO_MOUSE_PIN_UP 0
-#define GPIO_MOUSE_PIN_DOWN 1
-#define GPIO_MOUSE_PIN_LEFT 2
-#define GPIO_MOUSE_PIN_RIGHT 3
-#define GPIO_MOUSE_PIN_BLEFT 4
-#define GPIO_MOUSE_PIN_BMIDDLE 5
-#define GPIO_MOUSE_PIN_BRIGHT 6
-#define GPIO_MOUSE_PIN_MAX 7
-
-/**
- * struct gpio_mouse_platform_data
- * @scan_ms: integer in ms specifying the scan periode.
- * @polarity: Pin polarity, active high or low.
- * @up: GPIO line for up value.
- * @down: GPIO line for down value.
- * @left: GPIO line for left value.
- * @right: GPIO line for right value.
- * @bleft: GPIO line for left button.
- * @bmiddle: GPIO line for middle button.
- * @bright: GPIO line for right button.
- *
- * This struct must be added to the platform_device in the board code.
- * It is used by the gpio_mouse driver to setup GPIO lines and to
- * calculate mouse movement.
- */
-struct gpio_mouse_platform_data {
- int scan_ms;
- int polarity;
-
- union {
- struct {
- int up;
- int down;
- int left;
- int right;
-
- int bleft;
- int bmiddle;
- int bright;
- };
- int pins[GPIO_MOUSE_PIN_MAX];
- };
-};
-
-#endif /* _GPIO_MOUSE_H */
This is not used much: git grep gpio_mouse_platform_data shows that absolutely nothing in the kernel defines this platform data. It could be argued that the driver should be deleted. But that is a bit harsh I think since it seems generally useful. So this patch starts a series which repurposes it to be used with hardware nodes from device tree or ACPI. This first patch simply localize the platform data header and allocates a dummy platform data. Yes: this patch leaves the driver in a pretty useless state, but since nothing is instantiating this driver, it doesn't make it more useless than it already is. Later patches makes use of the driver. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- drivers/input/mouse/gpio_mouse.c | 59 +++++++++++++++++++++++++++++++++----- include/linux/gpio_mouse.h | 61 ---------------------------------------- 2 files changed, 52 insertions(+), 68 deletions(-) delete mode 100644 include/linux/gpio_mouse.h